정신분열병에 대한 리스페리돈의 효과 및 안정성

이민수,김용구,김영훈,연병길,오병훈,윤도준,윤진상,이철,정희연,강병조,김광수,김동언,김명정,김상훈,김희철,나철,노승호,민경준,박기창,박두병,백기청,백인호,손봉기,손진욱,양병환,양창국,우행원,이정호,이종범,이홍식,임기영,전태연,정영조,정영철,정인과,정인원,지익성,채정호,한상익,한선호,한진희,서광윤 大韓神經精神醫學會 1998 신경정신의학 Vol.37 No.1

연구목적 : 본 시험의 목적은 임상시험 시작전에 연구자들을 대상으로 PANSS Workshop을 통하여 PANSS, ESRS에 대한 국내에서의 표준화 작업을 구축하고 새로운 정신병 치료제인 리스페리돈의 효과와 안정성을 재확인하여 리스페리돈 사용에 대한 적정화를 이루는데 있다. 연구방법 : 1996년 4월부터 1996년 9월까지 국내 39개 대학병원 정신과에 입원중인 혹은 증상이 악화되어 입원하는 정신분열병 환자 377명을 대상으로 다시설 개방 연구를 시행하였다. 1주일간의 약물 배설기간을 가진후, 리스페리돈을 8주간 투여하였고, 기준점, 1주, 2주, 4주, 그리고 8주후에 평가되었다. 용량은 제1일에는 리스페리돈 1mg씩 1일 2회, 제2일에는 2mg씩 1일 2회, 제3∼7일에는 3mg씩 1일 2회 투여하였다. 이후 환자의 임상상태에 따라 임의로 증량할 수 있으며, 최대 일일 16mg을 초과하지 않도록 하였다. 추체외로 증상을 조절하기 위한 투약을 허용하였다. 임상증상 및 부작용의 평가는 PANSS(Positive and Negative Syndrome Scale), CGI(Clinical Global Impression) 그리고 ESRS(Extrapyramidal Symptom Rating Scale)을 사용하였다. 연구결과 : 377명중 343명(91%)이 8주간의 연구를 완결하였다. 치료 종결시점인 8주후 PANSS 총점수가 20% 이상 호전된 경우를 약물 반응군으로 정의할때, 약물반응군은 81.3%였다. 리스페리돈에 반응하는 예측인자로는 발병연령, 이전의 입원 횟수, 유병기간이 관련 있었다. 리스페리돈은 1주후부터 PANSS양성, 음성, 및 일반정신병리 점수상에 유의한 호전을 보여 효과가 빨랐다. CGI의 경우도 기준점에 비해 1주후부터 유의한 감소를 나타내었다. ESRS의 경우, 파킨슨 평가점수는 기준점과 비교해 투여 1주, 2주, 4주후 유의하게 증가되었다가 8주후 기준점과 차이가 없었다. Dystonia 평가점수는 1주후만 유의한 증가를 보였으며, dyskinesia 평가점수는 유의한 차이가 없었다. 혈압, 맥박수의 생명징후 및 일반 혈액학 검사, 생화학적 검사, 심전도 검사에서 유의한 변화는 없었다. 결 론 : 이상의 다시설 개방 임상 연구를 통해 리스페리돈은 정신분열병 환자에서 양성증상뿐만 아니라 음성증상 및 전반적인 증상에도 효과적인 것으로 사료된다. 보다 명확한 평가를 위해서는 다른 항정신병약물과의 이중맹검 연구가 필요할 것으로 생각되며, 또한 장기적 치료에 대한 평가도 함께 이루어져야 하겠다. Objective : The purpose of this study was to investigate the efficacy and safety of risperidone in the treatment of Korean schizophrenic patients. Method : This multicenter open study included 377 schizophrenic patients drawn from 39 university hospitals. After a wash-out period of 1 week, the schizophrenic patients were treated with risperidone for 8 weeks and evaluated at 5 points ; at baseline, and 1, 2, 4 and 8 weeks of treatment. The dose was increased from 2mg/day(1mg twice daily) to 6mg/day(3mg twice daily) during the first week and adjusted to a maximum of 16mg/day over the next 7 weeks according to the patient's clinical response. Medication to control extrapyramidal symptoms was permitted. The psychiatric and neurological status of the patients was assessed by PANSS, CGI, and ESRS scales. Results : 343(91%) of 377 patients completed the 8-week trial period. Clinical improvement, as defined by a 20% or more reduction in total PANSS score at end point, was shown by 81.3% of patients. The predictors of response to risperidone were associated older age, shorter duration of illness, fewer previous hospitalization. Risperidone had rapid onset of action ; a significant decrease of the total PANSS and three PANSS factor(positive, negative, general), and CGI was already noticed at the end of first week. For the ESRS, parkinsonism rating scores were significantly increased until week 4 comparing with baseline. Dystonia rating scores were significantly increased until week 1, and dyskinesia rating scores were not significantly changed during the study. Laboratory parameters including vital sign, EKG, hematological, and biochemical values showed no significant changes during the trial. Conclusions : This study suggests that risperidone is generally safe and effective against both the positive and negative symptoms in our group of patients.

Effect of Mechanical Alloying on the Microstructural Evolution of Al60Cr30Si10 Alloys Processed by Spark Plasma Sintering

Jeong‑Han Lee,Ik‑Hyun Oh,Jun‑Ho Jang,Ju‑Hun Kim,Sung‑Kil Hong,Hyun‑Kuk Park 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.5

In this study, Al, Cr and Si fine powders were alloyed by planetary ball milling to investigate their microstructural evolution,following their mechanical alloying behavior. The formation of Al(Cr) supersaturated solid solution by the Cr grainsembedded in Al-matrix, which contributed substitutional structure is discussed in relation to their structural evolution inaccordance with the distortion of a crystal lattice. The compacts of Al–Cr–Si alloys were prepared by rapid sintering withina short time by dense consolidation above the density of 99.9% as the formation of intermetallics, except in the case of thedistribution of single-phases induced by the Al-melting. The formation behavior of intermetallics was dominated by dependenceon the structures of the milled-powder and subsequent sintering temperature. To estimate the consolidated behaviorsof compacts, various approaches derived from TEM and XRD analysis were taken to obtain microstructural evidences ofthe inter-diffusion, following the presence of thermally stable intermetallics.

Rapid Consolidation of WC‑ZrSiO4 Hard Materials by Spark Plasma Sintering: Microstructure, Densification, and Mechanical Properties

Jeong‑Han Lee,Ik‑Hyun Oh,Ju‑Hun Kim,Sung‑Kil Hong,Hyun‑Kuk Park 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.9

Densely consolidated WC-based hard materials with 5–20 vol% ZrSiO4was fabricated by spark plasma sintering at 1400 ℃ ata constant heating rate of 70 ℃/min−1. To achieve mechanical alloying of WC-ZrSiO4, planetary ball milling was carried outfor 12 h, during which the brittle-brittle components (WC-ZrSiO4) became fragmented and their particles became refined. Itwas observed that certain, specific, non-isothermal sintering kinetics, such as apparent activation energy, sintering exponents,and densification strain, affected the densification behavior. The evolution of phase structure from powder to compact wasfound to be related the lattice distortion and micro-strain in the basal planes of WC. By examining the mechanical propertiesof the samples, it was that the added zircon content leads to enhanced fracture toughness (12.9 MPa m1/2) owing to thepresence of WC-ZrSiO4 in the cemented carbide. In fact, the microcrack propagation of the fracture passed through zirconfrom a transgranular to a ductile component (fcc) where the crack tips could be absorbed.

Influence of Phase Composition in TiAlSiN Hard Coatings on the Evolution of Structure and Mechanical Properties

Jeong‑Han Lee,Ik‑Hyun Oh,Jun‑Ho Jang,Ju‑Hun Kim,Sung‑Kil Hong,Hyun‑Kuk Park 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.3

The aim of this study is to investigate the structural evolution and mechanical properties of TiAlSiN coatings when processedby the arc ion plating method. To form a hard coating, Ti, Al, and Si powders were mechanically alloyed by planetary ballmilling; the powders were then densely compacted during a rapid sintering process into a ternary system coating, i.e. TiAlSi. The evolution of the structural phase from a powder to a compact material is dominated considerably by phase states suchas a supersaturated solid solution or intermetallic compounds. In the case of coating layers, the factors that determine thestructural evolution are associated with the phase stability of the nano-crystalline structure that in turn is associated withthe Ti/Al composition ratio. Motivated by this, we performed experiments to investigate the distribution of microstructures;the material’s binding energy, quantitative properties, transformation of crystal structure, and distribution of amorphous/crystalline were all recorded. In particular, the relationship between the physical and chemical properties during the coatingprocess is considered to be the dominant factor controlling the orientation and morphology of that zone (1, T, and 2). TheTiAlSiN coating layer was found to have hardness above 45 GPa and an adhesion above 100 N. In other words, understandingthe evolution and structure of TiAlSin helped us to produce a material with excellent properties that can be used as a hardcoating. Specifically, these properties were induced by a grain refinement of the nano-crystalline structure that correspondsto an increase in the silicon nitride contents.

위절제술 환자의 표준진료지침 개발 및 적용 효과

김은희,김철규,이순교,김순덕,이혜옥,권정순,이경미,이민미,심순미,유용만,신종식,강은희,이상일,김병식,오성태,육정환,박수길 한국의료QA학회 2003 한국의료질향상학회지 Vol.10 No.2

Background : Gastric cancer is the most common malignant tumor in Korea. surgical operation is one of the major treatment modalities for gastric cancer patients. Therefore, gastrectomy is one of the most common procedures in General Surgery. There were variation in length of hospital stay and medical treatment for gastrectomy between three surgeons at Asan Medical Center. Clinical pathways have received considerable attention as a tool for recucing the medical practice variation, increasing the efficiency of care process, and improving the quality of care. The aim of this study was to evaluate the effect of a clinical pathway for gastrectomy in gastric cancer patients. Methods : The clinical pathway for gastrectomy was developed and implemented by a multidisciplinary group in Asan Medical Center. A computerized clinical pathway program was developed and revised after a pilot test. A total of 145 patients underwent gastrectomy by three surgeons at Asan Medical Center. We compared the length of hospital stay, patient satisfaction, and unplanned readmission rate between the pre-pathway group(n=67) and the post-pathway group(n=78). We also investigated the degree of satisfaction among the physicians and nurses who were main end-users of the clinical pathway. Results : The clinical pathway was applied to all target patients. The average length of hospital stay was shortened from 12.7days to 10.6days(p<0.01). The degree of patient satisfaction with the care process changed from 90.3% to 89.2% after the implementation of the clinical pathway, but the difference was of satistically significant(p=0.761). Unplanned readmission rate was 2.9% in the pre-pathway group. More than 90% of physicians and nurses answered that the clinical pathway had been a useful tool in their medical practice. Conclusions : The findings of the study demonstrated that implementation of the clinical pathway for gastrectomy produced substantial reduction in the length of hospital stay while improving the quality of patient outcomes. The computerized clinical pathway program can be used as one of the powerful patient management tools for reducing the practice variations and increasing the efficiency of care process in Korea hospital settings.

서울의 Penicillinase Producing Neisseria gonorrhoeae 발생빈도(1998)

김재홍,김준호,반재용,이정우,황성주,정준규,정성태,강진문,조흔정,홍창의,정혜신,이한승,김이선,이봉길,이종호,선영우,한기덕,윤성필,이성훈,안종성,박석범,문승현,조항래,김형섭,류지호,황재영,박준홍,손상욱 한양대학교 의과대학 2001 한양의대 학술지 Vol.21 No.1

In recent years, gonorrhea has been pandemic and remains one of the most common STDs in the world, especially in developing countries. For the detection of a more effective therapeutic regimen and assessing the prevalence of Penicillinase Producing Neisseria gonorrhoeae(PPNG), we have been trying to study the patients who have visited the Venereal Disease Clinic of Choong-Ku Public Health Center in Seoul since 1980 by menas of the chromogenic cephalosporin method. In 1998, 93 strians of N. genorrhoeae were isolated, among which 60(64.5%) were PPNG. The prevalence of PPNG in Seoul, which had been decreased to 39% in 1996 after a peak of 74.3% in 1993, is increased to 64.5% in 1998.

AI/CFRP 혼성튜브의 적층각과 단면형상에 따른 축방향 압궤 특성

김선규,이길성,김성훈,차천석,김정호,양인영 朝鮮大學校 機械技術硏究所 2004 機械技術硏究 Vol.7 No.1

알루미늄은 수송기계용 구조부재로 널리 쓰이고 있으며 복합재료가 이러한 수송기계용 구조부재로 쓰일 때 경량화와 많은 에너지 흡수 측면이 기대된다. 알루미늄 튜브는 CFRP(탄소 섬유 강화 복합재료)튜브에 비해 압궤하중은 낮지만 안정적인 소성변형에 의해 압궤되는 반면 CFRP 튜브는 알루미늄 튜브에 비해 압궤하중은 높지만 불안정한 취성파괴에 의해 압궤된다. 따라서 알루미늄과 CFRP의 조합은 안정적이며 뛰어난 에너지흡수를 기대할 수 있다. 본 연구에서는 알루미늄 원형과 사각튜브의 외측을 CFRP로 감싸 Al/CFRP 혼성튜브를 제작하여 축방향 압궤특성에 관하여 연구하였다. 알루미늄 튜브와 CFRP 튜브의 압궤특성을 기초로 하여, Al/CFRP 흔성튜브의 이방성 재료인 CFRP의 적층각과 단면형상의 변화를 주었다. 실험결과, Al/CFRP 흔성튜브는 알루미늄 튜브의 좌굴을 계기로 하여 CFRP 튜브의 불안정한 취성파괴의 단점을 보완하였다. 경량화 측면에서 단위 질량당 흡수에너지는 원형튜브가 사각튜브에 비해 약 45~70% 이상 높았으며 CFRP 적충각이 90˚일 때 가장높았다. Aluminum materials have been widely used in various vehicle structures. If composite materials are applied to vehicle structures, it is expected that not only the weight of the vehicle is decreased but also it absorb large amounts of energy. Aluminum tubes are lower than CFRP (Carbon Fiber Reinforced Plastics) tubes in the collapse load but absorb energy by stable plastic deformation. On the other hand, CFRP tubes are higher than aluminum tubes in the collapse load but absorb energy by unstable brittle failure. The combination of aluminum and composite may result in stable deformation and excellent energy absorption efficiency. The compressive axial collapse tests were performed to investigate collapse characteristics of Al/CFRP compound tubes which are aluminum tubes wrapped with CFRP outside the aluminum circular and square tubes. Based on collapse characteristics of aluminum tubes and CFRP tubes respectively, the axial collapse tests were performed for Al/CFRP compound tubes which have different CFRP orientation angles and cross-sections. Test results showed that Al/CFRP compound tubes supplemented the unstable brittle failure of CFRP tubes due to ductile nature of inner aluminum tubes. In the light-weight aspect, Absorbed energy per unit mass of circular tubes was higher than square tubes'. Absorbed energy per unit mass showed highest when CFRP orientation angle was 90 degrees.

Continuous wave of obturation technique에서 플러거의 다양한 적용 깊이에 따른 근단부 폐쇄효율 비교

이상진,박정길,허복,김현철 大韓齒科保存學會 2007 Restorative Dentistry & Endodontics Vol.32 No.6

이 연구와 목적은 continuous wave of obturation technique으로 근관 충전을 할 때, 다양한 heat source plugger의 깊이에 따른 근단부 근관 폐쇄능력을 비교하는 것이었다. 직전 형태 발거 소구치를 #35/.06크기까지 니켈티타늄 파일을 사용하여 성형 및 세정하였다. 성형과 세정이 완료된 치아를 heat source plugger의 적용 깊이에 따라 15개씩 5군으로 분류하였다: 3 mm, 4 mm, 5 mm, 6 mm, 7 mm. 양성 대조군을 제외한 모든 근관은 E&Q plus (Meta Biomed Co., Chungju, Korea)를 사용하여 #35/.06 gutta-percha cone으로 충전하였다. 모든 치아의 근첨공 주변 1 mm를 제외하고 nail varnish를 도포하였고 음성 대조군은 근첨공을 포함하여 전체 면을 도포하였다. 모든 시편을 1% 메틸렌블루 용액에 72시간 동안 보관한 다음 치근첨으로부터 1, 2, 3 mm 높이에서 수평으로 절단하였다. 각 단면을 12.5 x 2.5배 현미경하에서 관찰하고 디지털 카메라로 촬영하였다. 염색제 누출 평가를 위해 five-degree scoring system을 사용하였다. 각 절단면에서의 점수를 모두 합하여 한 시편의 점수로 사용하고 통계학적 분석을 하였다. 이 실험 조건하에서, 3 - 7 mm 까지의 heat source plugger의 적용 깊이는 근단부 폐쇄에서 유의한 차이를 나타내지 않았다. 5 - 7 mm의 Buchanan's protocol을 포함한 3 - 7 mm를 모두 임상 적용에서 받아들여질 만하다고 보인다. The purpose of this study was to compare apical sealing ability of continuous wave canal filling technique according to various heat source plugging depths. Eighty one extracted human premolars with straight root were cleaned and shaped to size 35 using .06 taper rotaiy NiTi file. After cleansing and shaping, the teeth were divided into 5 groups following the heat source probing depths from the apex ; 3, 4, 5, 6 and 7 mm. All specimens were filled using E&Q Plus with #35/.06 tapered gutta-percha cone. The positive control teeth were not filled. All teeth were coated with nail varnish except the apical 1 mm around the apical foramen. Negative control teeth were completely sealed include the apical foramen. All specimens were immersed in 1% methylene blue solution for 72 hours. Then the specimens were sectioned horizontally at 1, 2 and 3 mm from the root apex. Each sectioned surface was photographed using a digital camera attached to the stereomicroscope at 12.5 x 2.5 fold magnification. All points at 1, 2 and 3 mm were summed as final score of one specimen. Statistical analysis of the collected data was performed. Under the condition of this study, there was no significant difference between the heat source plugging depths of 3, 4, 5, 6 and 7 mm in apical sealing ability. All of apical heat source plugging depth from 3 to 7 mm including Buchanan's protocol -from 5 to 7 mm- seems to be acceptable in clinical application.

한국어 음성의 음소분리에 관한 연구

이수길, 송정영 배재대학교 공학연구소 2016 공학논문집 Vol.18 No.1

본 논문은 한국어 음성의 음소분리에 관한 연구이다. 음성인식에 있어서 음성을 음소단위로 인식하는 방법은 가장 효과적인 방법이다. 그러나 음성을 음소단위로 분리하는 것은 발음의 변화가 너무 다양하기 때문에 잘 적용되지 못하고 있다. 따라서 본 연구에서는 훈민정음의 음운체계를 기초로 하여 한국어의 음소체계를 정리하고 음성을 음소단위로 분리하고자 한다. 본 연구에서는 음소를 주파수 영역과 멜대역 그리고 멜켑스트럼의 변화를 관찰하여 각 음소들이 가지고 있는 특징을 찾아내고 분리의 규칙을 정리하여 효과적인 음성인식 방법이 될 수 있는 한국어 음소분리 체계를 정립하고자 한다. It is generally known that accurate segmentation is very necessary for both an individual word and continuous utterances in speech recognition. It is also commonly known that techniques are now being developed to classify the voiced and the unvoiced, also classifying the plosives and the fricatives. The method for accurate recognition of the phonemes isn't yet scientifically established. Therefore, in this study we analyze the Korean language, using the classification of "Hunminjeongeum" and contemporary phonetics, with the frequency band, Mel band and Mel Cepstrum, we extract notable features of the phonemes from Korean speech and segment speech by the unit of the phonemes to normalize them. Finally, through the analysis and verification, we intend to set up Phonemic Segmentation System that will make us able to adapt it to both an individual word and continuous utterances.

Virtual 토폴로지를 이용한 WDM LAN의 링, 버스, 스타 토폴로지와 Shufflenet의 성능평가

정길현,이정규 한양대학교 공학기술연구소 1995 공학기술논문집 Vol.4 No.1

Wavelength Division Multiplexing (WDM) provides high speed communication networks by utilizing the vast bandwidth of optical fibers. Electronic bottlenecks can be avoided and various network features are offered by using WDM. In this paper, we have analyzed the performance of ring, bus, star topologies and shufflenet under this WDM regular virtual topologies. The ring topology has been adopted as the appropriate structure for Local Area Networks (LAN). The performance of unidirectional ring topology, bidirectional ring topology and shufflenet have been compared with the node processing efficiency by using WDM. The average distances, which is the important parameters of regular structures, has been computed and then the computation has been confirmed via simulation. As results, it has seen that the performance of ring, bus, and star topologies in case of regular virtual topology are equal and the performance of shufflenet is better than that of ring topology.