만성 두부외상 환자에서 99mTc - HMPAO Brain SPECT의 임상적 유용성

서정호(Jung Ho Suh),김동익(Dong Ik Kim),정태섭(Tae Sub Chung),이종두(Jong Doo Lee),박창윤(Chang Yoon Park),정진일(Jin Ill Chung),김영수(Young Soo Kim) 대한핵의학회 1992 핵의학 분자영상 Vol.26 No.1

N/A Minima1 deterioration of cerebral perfusion or microanatomical changes were undetectable on conventional Brain CT or MRI. So evaluation of focal functional changes of the brain parenchyme is essential in chronic head injury patients, who did not show focal anatomical changes on these radiological studies. However, the patients who had longstanding neurologic sequelae following head injury, there had been no available imaging modalities for evaluating these patients precisely. Therefore we tried to detect the focal functional changes on the brain parenchyme using Tc-99m-HMPAO Brain SPECT on the patients of chronic head injuries. Twenty three patients who had suffered from headache, memory dysfunction, personality change and insomnia lasting more than six months following head injury were included in our cases, which showed no anatomical abnormalities on Brain CT or MRI. At first they underwent psychological test whether the symptoms were organic or not. Also we were able to evaluate the cerebral perfusion changes with Tc-99m-HMPAO Brain SPECT in 22 patients among the 23, which five patients were focal and 17 patients were nonfocally diffuse perfusion changes. Thus we can predict the perfusion changes such as local vascular deterioration or functional defects using Tc-99m-HMPAO Brain SPECT in the patients who had suffered from post-traumatic sequelae, which changes were undetectable on Brain CT or MRI.

Holographic interferometry를 이용한 열중합 애크릴릭 레진의 변형에 관한 연구

박동관,장익태,김광남,Park, Dong-Kwan,Chang, Ik-Tae,Kim, Kwang-Nam 대한치과보철학회 1995 대한치과보철학회지 Vol.33 No.1

Since heat curing acrylic resins undergo unavoidable dimensional changes following polymerization, adaptation can be altered. Until recently, although numerous studies on the dimensional changes of denture base were based on a microscopic technic that measures the relative displacement of a limited reference points on the denture base, but there have been few studies on the distortions of resins using holographic interferometry. Purpose of this study was to determine and compare the dimensional changes and fringe patterns of 4 heat curing acrylic resins, and observe the distortions of acrylic resin denture base by temperature change with the aid of the holographic interferometry. Holographic interferograms were taken on the resin specimens and acrylic resin denture base with the 10mW He-Ne laser and double exposure method. Comparison and analysis of fringe pattern on the recorded object surface was performed. The following results were obtained. 1. The dimensional changes for the high impact resin Lucitone 199 were statistically the greatest of all resins, and the rapid heat curing resin Premium super 20 were the least. 2. The most polymerization shrinkage of all materials occured in initial period of measurements, at this time the difference of polymerization shrinkage properties between resins was founded. 3. The stress distribution of specimens was seen by various type of fringe pattern which had directionality. 4. The polymerization shrinkage of resins was greatly influenced by temperature change. 5. The partial deformations of resin denture base were observed in 70 C and 90 C water.

COLOR STABILITY OF CURRENT PROSTHETIC COMPOSITES UNDER ACCELERATED AGING AND IMMERSION IN A COFFEE SOLUTION

Kim, Hyo-Jin,Heo, Seong-Joo,Koak, Jai-Young,Chang, Ik-Tae The Korean Academy of Prosthodonitics 2002 대한치과보철학회지 Vol.40 No.3

The color stability of current prosthetic composites is unknown, even though the quality of composite materials has been improving. This study examined the intrinsic color stability of various current prosthetic resins (ceramic-polymers) after an accelerated aging process and the extrinsic color stability after immersion in a coffee solution. By comparing the amount of discoloration after aging with that without aging, the effect of the accelerated aging process on external discoloration could be evaluated. Three current prosthetic composites (Artglass, Targis, Sculpture), one light polymerized direct composite (Z100) and one dental porcelain control (Ceramco) were assessed. The color changes (${\Delta}$E) of all the specimens were determined using the CIE $L^{*}a^{*}b^{*}$ color order system with a reflected spectrophotometer. The results were as follows: 1. The prosthetic composite materials subjected to the accelerated aging test showed no significant difference in color changes (p >.05). 2. In the coffee solution immersion test after the aging process, the color changes of the Targis and Artglass groups were not different from that of the Z100 group, which showed the highest color change. 3. In the immersion only test, a significantly high color change was observed in the sculpture glazing group. 4. The aging process influenced on the color changes more in the Targis, Artglass and Z100 groups than in the Sculpture and Ceramco groups.

정신분열병에 대한 리스페리돈의 효과 및 안정성

이민수,김용구,김영훈,연병길,오병훈,윤도준,윤진상,이철,정희연,강병조,김광수,김동언,김명정,김상훈,김희철,나철,노승호,민경준,박기창,박두병,백기청,백인호,손봉기,손진욱,양병환,양창국,우행원,이정호,이종범,이홍식,임기영,전태연,정영조,정영철,정인과,정인원,지익성,채정호,한상익,한선호,한진희,서광윤 大韓神經精神醫學會 1998 신경정신의학 Vol.37 No.1

연구목적 : 본 시험의 목적은 임상시험 시작전에 연구자들을 대상으로 PANSS Workshop을 통하여 PANSS, ESRS에 대한 국내에서의 표준화 작업을 구축하고 새로운 정신병 치료제인 리스페리돈의 효과와 안정성을 재확인하여 리스페리돈 사용에 대한 적정화를 이루는데 있다. 연구방법 : 1996년 4월부터 1996년 9월까지 국내 39개 대학병원 정신과에 입원중인 혹은 증상이 악화되어 입원하는 정신분열병 환자 377명을 대상으로 다시설 개방 연구를 시행하였다. 1주일간의 약물 배설기간을 가진후, 리스페리돈을 8주간 투여하였고, 기준점, 1주, 2주, 4주, 그리고 8주후에 평가되었다. 용량은 제1일에는 리스페리돈 1mg씩 1일 2회, 제2일에는 2mg씩 1일 2회, 제3∼7일에는 3mg씩 1일 2회 투여하였다. 이후 환자의 임상상태에 따라 임의로 증량할 수 있으며, 최대 일일 16mg을 초과하지 않도록 하였다. 추체외로 증상을 조절하기 위한 투약을 허용하였다. 임상증상 및 부작용의 평가는 PANSS(Positive and Negative Syndrome Scale), CGI(Clinical Global Impression) 그리고 ESRS(Extrapyramidal Symptom Rating Scale)을 사용하였다. 연구결과 : 377명중 343명(91%)이 8주간의 연구를 완결하였다. 치료 종결시점인 8주후 PANSS 총점수가 20% 이상 호전된 경우를 약물 반응군으로 정의할때, 약물반응군은 81.3%였다. 리스페리돈에 반응하는 예측인자로는 발병연령, 이전의 입원 횟수, 유병기간이 관련 있었다. 리스페리돈은 1주후부터 PANSS양성, 음성, 및 일반정신병리 점수상에 유의한 호전을 보여 효과가 빨랐다. CGI의 경우도 기준점에 비해 1주후부터 유의한 감소를 나타내었다. ESRS의 경우, 파킨슨 평가점수는 기준점과 비교해 투여 1주, 2주, 4주후 유의하게 증가되었다가 8주후 기준점과 차이가 없었다. Dystonia 평가점수는 1주후만 유의한 증가를 보였으며, dyskinesia 평가점수는 유의한 차이가 없었다. 혈압, 맥박수의 생명징후 및 일반 혈액학 검사, 생화학적 검사, 심전도 검사에서 유의한 변화는 없었다. 결 론 : 이상의 다시설 개방 임상 연구를 통해 리스페리돈은 정신분열병 환자에서 양성증상뿐만 아니라 음성증상 및 전반적인 증상에도 효과적인 것으로 사료된다. 보다 명확한 평가를 위해서는 다른 항정신병약물과의 이중맹검 연구가 필요할 것으로 생각되며, 또한 장기적 치료에 대한 평가도 함께 이루어져야 하겠다. Objective : The purpose of this study was to investigate the efficacy and safety of risperidone in the treatment of Korean schizophrenic patients. Method : This multicenter open study included 377 schizophrenic patients drawn from 39 university hospitals. After a wash-out period of 1 week, the schizophrenic patients were treated with risperidone for 8 weeks and evaluated at 5 points ; at baseline, and 1, 2, 4 and 8 weeks of treatment. The dose was increased from 2mg/day(1mg twice daily) to 6mg/day(3mg twice daily) during the first week and adjusted to a maximum of 16mg/day over the next 7 weeks according to the patient's clinical response. Medication to control extrapyramidal symptoms was permitted. The psychiatric and neurological status of the patients was assessed by PANSS, CGI, and ESRS scales. Results : 343(91%) of 377 patients completed the 8-week trial period. Clinical improvement, as defined by a 20% or more reduction in total PANSS score at end point, was shown by 81.3% of patients. The predictors of response to risperidone were associated older age, shorter duration of illness, fewer previous hospitalization. Risperidone had rapid onset of action ; a significant decrease of the total PANSS and three PANSS factor(positive, negative, general), and CGI was already noticed at the end of first week. For the ESRS, parkinsonism rating scores were significantly increased until week 4 comparing with baseline. Dystonia rating scores were significantly increased until week 1, and dyskinesia rating scores were not significantly changed during the study. Laboratory parameters including vital sign, EKG, hematological, and biochemical values showed no significant changes during the trial. Conclusions : This study suggests that risperidone is generally safe and effective against both the positive and negative symptoms in our group of patients.

양돈폐수로부터의 수소 생성 특성

장영복,정태영,차기철,정형근,김성헌,김동진,유익근 한국물환경학회 2004 한국물환경학회지 Vol.20 No.4

The characteristics of H₂ production from livestock wastewater were investigated through an anaerobic acid forming process using Clostridium beijerinckii and the photosynthetic process using Rhodobacter sphaeroides. The submerged separation membrane was installed in the acid forming reactor. The photosynthetic process is composed of two reactors(photosynthetic reactor 1 and photosynthetic reactor 2) which is connected continually. The removal rate of COD and the production of volatile fatty acid(VFA) in the acid forming process were approximately 50% and 1000㎎/ L, respectively. The 70% of COD in the effluent of acid forming process was removed through the photosynthetic process. The production of H₂ in the photosynthetic reactor 1 and 2 was 50 and 25mLH₂/gVFA_(COD), respectively. The values of Y in acid forming reactor, photosynthetic reactor 1 and 2 was 0.2263, 0.0601 and 0.0393, respectively. The acetic acid and butyric acid produced in acid forming process were converted to H₂ by photosynthetic bacteria.

고속 머시닝센터의 성능평가 기술에 관한 연구

강익수,강명창,김정석,김기태 한국공작기계학회 2004 한국공작기계학회 추계학술대회논문집 Vol.2004 No.-

The high speed machining center(HMC) has been widely applied to manufacture a die and machine elements product in industrial field. Because the evaluation for HMC is not sufficiently performed, ineffective machining is occasionally conducted in machining industry. In this study, the dynamic characteristics of newly developed machining center is evaluated under running condition and the machinability is investigated experimentally. Also, the in-process measuring instrument which can measure the tool wear on the machine were developed by using the CCD and exclusive jig and calibration instrument for tool wear measurement.

운동부하양식에 따른 심폐 능력의 비교분석

전태원,우재홍,신창호,이기봉,이광희,박익렬,박성태,강현주 서울대학교 체육연구소 2000 서울大學校 體育硏究所論集 Vol.21 No.1

The purpose of this study this study was to comparative analysis the V02max and HR through arm ergometer exercise, bicycle ergometer exercise, and treadmill exercise and to propose correct data of aerobic ability according to GXT. Subjects for study were 8 healthy male students. The process of the test were performed maximal GXT on arm ergometer exercise, bicycle ergometer exercise, and treadmill exercise and measured V02max, max heart rate and recovery time of 3 VO2 and heart rate respectively. The conclusions were supported by the findings of this study: 1.There were significant differences between test style and V02/kg/min(p<.05). 2.There were significant differences between test style and test stage at heart rate(p<.05) There were no effect of reciprocal action. Therefore, V02/kg/min should be on individual exercise prescription guiedlines for health promotion should be provided proper GXT which are arm ergometer exercise, bicycle ergometer exercise, and treadmill exercise.

고속 머시닝센터의 진동특성 및 가공성 평가

강익수,강명창,김정석,김기태 한국공작기계학회 2004 한국공작기계학회 춘계학술대회논문집 Vol.2004 No.-

The high speed machining center(HMC) has been widely applied to manufacture a die and trial product in many machine industry. Because the evaluation for HMC is not sufficiently performed and the efficient cutting conditions can't be selected, a great loss has been caused in the cost aspect. In this study, the need of preliminary running time and unstable spindle speed is presented by the analysis of acceleration in idling. The Machinability for the TiAIN coated flat end mill and STD11(H_(R)C60) is evaluated from the trends of tool wear and cutting force according to cutting conditions. The resonance spindle speed is identified through the tool wear and natural frequency test.

트랙타 부착 대형이앙기 개발 및 재배적 실용성

박성태,장익주,정창화,김상열,김재현,문헌팔,양세준,김순철 한국국제농업개발학회 2002 韓國國際農業開發學會誌 Vol.14 No.3

쌀 생산비를 줄이고 대경지 규모화 영농에 적응할 수 있는 농기계 개발을 목적으로 연구개발한 대규모 경지적응 트랙터 부착 대형벼이앙기의 구성과 특징 및 개발시작기의 재배적 실용성 평가결과를 요약정리하면 다음과 같다. 1. 트랙터 부착 12조 대형벼이앙기는 크게 바퀴자국 제거로타리, 문짝형 정지판, 이앙장치부 등으로 구성되어 있다. 2. 트랙터 부착 12조 이앙기는 트랙터 동력을 이용하여 로타리, 정지 및 이앙작업이 동시에 이루어 질 수 있도록 개발하였다. 3. 바퀴자국을 없애는 날은 기존의 로타리 날을 교체하면 되도록 반달형 날로 제작하였다. 4. 이앙기는 이동시는 접을 수 있도록 설계 제작되어 대형화가 가능하므로 기존 6조 승용이앙기에 비하여 이앙작업 능력이 1.5배 이상이었다. 5. 트랙터 부착 대형벼이앙기는 트랙터와 같은 큰 동력원을 이용할 수 있으므로 측조시비기, 긴매트모 탑재 등 다양한 작업기 및 기능을 추가로 부착 가능하도록 설계되었다. 6. 트랙터 부착 대형벼이앙기는 어린모 및 중묘이앙시 결주율은 3.0∼4.3%로 기계이앙기 결주 허용범위 5% 미만이었다. 하지만 무경운 논에서는 이앙작업은 가능하나 부묘율이 다소 높은 점은 보완이 필요하다. To develop a labor saving rice cultivation technology, a new tractor attached rice transplanter has been developed for large scale farming and its field performance was evaluated. The rice transplanter consists of three major parts such as rotary for removing tractor tire furrow, door-shaped soil leveling plate and transplanting equipment. The rice transplanter is operated using the power of the tractor and performs rotary, harrow and seedling transplanting simultaneously. A half moon shaped rotary blade was found to be very efficient to remove tire furrow developed during seedling transplanting and the original rotary blade can be replaced easily with existed rotary blade. The seedling transplanting part of the transplanter was designed to fold into small size and the transplanting efficiency of the transplanter was found to be 1.5 times higher than that of the conventional riding type six row transplanter. Since the transplanter is operated through a strong power of the tractor, the additional attachment such as fertilizer application apparatus and long mat rice seedling carrier is possible. Based on the field performance of the transplanter, although the missing hill percentage showed roughly with 3.0∼4.3% for 10-day and 30-day old seedlings but the percentage is less than 5% which is maximum missing hill permit in the transplanting rice. Seedling transplanting in no-tillage field condition is acceptable but floating seedling percentage is still high and thus further technology improvement for minimizing floating seedling percontage is needed.

폐굴껍질을 산성토양 적용시 토양의 화학적 특성변화에 관한 기초 연구

임진희,문종익,김성우,성낙창,이영형,윤태경 동아대학교 환경문제연구소 1999 硏究報告 Vol.22 No.2

Oyster shell has caused environmental problems in the coast. But it is possible to be used as an acidic soil amendment because it is the alkalic material of pH 9.0. In order to evaluate the utility of the crushed oyster shell as a soil amendment, acidic sandy loam soil was amended with it and then Chinese cabbages were cultivated in pots. The amount of the oyster shell was ⅰ)none, ⅱ)0.5kg/㎥, ⅲ)1.0kg/㎥, ⅳ)1.5kg/㎥, ⅴ)2.0kg/㎥ and ⅵ)2.3kg/㎥. The particle size of oyster shell consists of 34.88% of 40∼100mesh and 14.98% of larger than 100 mesh. It increased pH and the contents of available P₂O_(5) and SiO₂ and exchangeable Ca in used soil The application of oyster shell also increased the height and diameter of Chinese cabbages.