정신분열병에 대한 리스페리돈의 효과 및 안정성

이민수,김용구,김영훈,연병길,오병훈,윤도준,윤진상,이철,정희연,강병조,김광수,김동언,김명정,김상훈,김희철,나철,노승호,민경준,박기창,박두병,백기청,백인호,손봉기,손진욱,양병환,양창국,우행원,이정호,이종범,이홍식,임기영,전태연,정영조,정영철,정인과,정인원,지익성,채정호,한상익,한선호,한진희,서광윤 大韓神經精神醫學會 1998 신경정신의학 Vol.37 No.1

연구목적 : 본 시험의 목적은 임상시험 시작전에 연구자들을 대상으로 PANSS Workshop을 통하여 PANSS, ESRS에 대한 국내에서의 표준화 작업을 구축하고 새로운 정신병 치료제인 리스페리돈의 효과와 안정성을 재확인하여 리스페리돈 사용에 대한 적정화를 이루는데 있다. 연구방법 : 1996년 4월부터 1996년 9월까지 국내 39개 대학병원 정신과에 입원중인 혹은 증상이 악화되어 입원하는 정신분열병 환자 377명을 대상으로 다시설 개방 연구를 시행하였다. 1주일간의 약물 배설기간을 가진후, 리스페리돈을 8주간 투여하였고, 기준점, 1주, 2주, 4주, 그리고 8주후에 평가되었다. 용량은 제1일에는 리스페리돈 1mg씩 1일 2회, 제2일에는 2mg씩 1일 2회, 제3∼7일에는 3mg씩 1일 2회 투여하였다. 이후 환자의 임상상태에 따라 임의로 증량할 수 있으며, 최대 일일 16mg을 초과하지 않도록 하였다. 추체외로 증상을 조절하기 위한 투약을 허용하였다. 임상증상 및 부작용의 평가는 PANSS(Positive and Negative Syndrome Scale), CGI(Clinical Global Impression) 그리고 ESRS(Extrapyramidal Symptom Rating Scale)을 사용하였다. 연구결과 : 377명중 343명(91%)이 8주간의 연구를 완결하였다. 치료 종결시점인 8주후 PANSS 총점수가 20% 이상 호전된 경우를 약물 반응군으로 정의할때, 약물반응군은 81.3%였다. 리스페리돈에 반응하는 예측인자로는 발병연령, 이전의 입원 횟수, 유병기간이 관련 있었다. 리스페리돈은 1주후부터 PANSS양성, 음성, 및 일반정신병리 점수상에 유의한 호전을 보여 효과가 빨랐다. CGI의 경우도 기준점에 비해 1주후부터 유의한 감소를 나타내었다. ESRS의 경우, 파킨슨 평가점수는 기준점과 비교해 투여 1주, 2주, 4주후 유의하게 증가되었다가 8주후 기준점과 차이가 없었다. Dystonia 평가점수는 1주후만 유의한 증가를 보였으며, dyskinesia 평가점수는 유의한 차이가 없었다. 혈압, 맥박수의 생명징후 및 일반 혈액학 검사, 생화학적 검사, 심전도 검사에서 유의한 변화는 없었다. 결 론 : 이상의 다시설 개방 임상 연구를 통해 리스페리돈은 정신분열병 환자에서 양성증상뿐만 아니라 음성증상 및 전반적인 증상에도 효과적인 것으로 사료된다. 보다 명확한 평가를 위해서는 다른 항정신병약물과의 이중맹검 연구가 필요할 것으로 생각되며, 또한 장기적 치료에 대한 평가도 함께 이루어져야 하겠다. Objective : The purpose of this study was to investigate the efficacy and safety of risperidone in the treatment of Korean schizophrenic patients. Method : This multicenter open study included 377 schizophrenic patients drawn from 39 university hospitals. After a wash-out period of 1 week, the schizophrenic patients were treated with risperidone for 8 weeks and evaluated at 5 points ; at baseline, and 1, 2, 4 and 8 weeks of treatment. The dose was increased from 2mg/day(1mg twice daily) to 6mg/day(3mg twice daily) during the first week and adjusted to a maximum of 16mg/day over the next 7 weeks according to the patient's clinical response. Medication to control extrapyramidal symptoms was permitted. The psychiatric and neurological status of the patients was assessed by PANSS, CGI, and ESRS scales. Results : 343(91%) of 377 patients completed the 8-week trial period. Clinical improvement, as defined by a 20% or more reduction in total PANSS score at end point, was shown by 81.3% of patients. The predictors of response to risperidone were associated older age, shorter duration of illness, fewer previous hospitalization. Risperidone had rapid onset of action ; a significant decrease of the total PANSS and three PANSS factor(positive, negative, general), and CGI was already noticed at the end of first week. For the ESRS, parkinsonism rating scores were significantly increased until week 4 comparing with baseline. Dystonia rating scores were significantly increased until week 1, and dyskinesia rating scores were not significantly changed during the study. Laboratory parameters including vital sign, EKG, hematological, and biochemical values showed no significant changes during the trial. Conclusions : This study suggests that risperidone is generally safe and effective against both the positive and negative symptoms in our group of patients.

집먼지 진드기(Dermatophagoides farinae and D. pteronyssinus)에 대한 몇가지 허브 에센셜 오일의 기피효과

김병윤, 지차호 충북대학교 동물의학연구소 2008 Journal of Biomedical and Translational Research Vol.9 No.1

본문참고

SiH₄/He 혼합가스를 사용하여 제작된 다결정 실리콘 박막의 특성 연구

문병연,곽호원 경운대학교 산업기술연구소 2002 産業技術硏究論文誌 Vol.5 No.1(A)

We studied the deposition of poly-Si using Si using SiH₄/He mixtures by inductively coupled plasma chemical vapor deposition. Volume fraction, grain size and deposition rate of poly-Si decreased by adding He into SiH₄ plasma. The decrease of crystallinity and deposition rate are due to ion bombardment. when we used SiH₄ as the source gas, the deposition rate was 7.44 A˚/sec. The poly-Si film exhibited the volume fraction from Raman scattering of 83.6% and FWHM of 8.89 cm^1

고주파수 PWM 제어를 이용한 ABS의 특성 평가에 관한 연구

김병우,이용주,박호 한국공작기계학회 2004 한국생산제조학회지 Vol.13 No.2

In general the surge pressure generated in hydraulic systems causes noise, vibration and odd effect to the system. To reduce the surge pressure, high frequency PWM control of 20KHz was attempted. To estimate the braking noise caused by surge, a vehicle equipped with on-board ABS hydraulic modulator has been experimented with respect to the various breaking condition. Though this experiments, it was found that breaking noise has been reduced using high frequency PWM control method compare with low frequency method. To evaluate high frequency control in practice, including verification of general functionality, EM tests was experimented. Its was found that it is necessary to have the solution to electromagnetic interference(EMI) generated by switching elements.

광조사 강도가 복합레진의 중합반응속도에 미치는 영향에 관한 실시간 체적측정법을 이용한 연구

라성호,이인복,김창근,조병훈,이광원,손호현 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.2

Objectives The aim of this study is to evaluate the effect of light intensity variation on the polymerization rate of composite resin using IB system (the experimental equipment designed by DR. IB Lee) by which real-time volumetric change of composite can be measured. Methods Three commercial composite resins [Z100(Z!), AeliteFil(AF), SureFil(SF)] were photopolymerized with Variable Intensity Polymerizer unit (Bisco, U.S.A.) under the variable light intensity (75/150/225/300/375/450mW^2) during 20 sec. Polymerization shrinkage of samples was detected continuously by IB system during 110 sec and the rate of polymerization shrinkage was obtained by its shrinkage data. Peak time(P.T.) showing the maximum rate of polymerization shrinkage was used to compare the polymerization rate. Results Peak time decreased with increasing light intensity(p<0.05). Maximum rate of polymerization shrinkage increased with increasing light intensity(p<0.05). Statistical analysis revealed a significant positive correlation between peak time and inverse square root of the light intensity (AF:R=0.965, Z1:R=0.974, SF:R=0.927). Statistical analysis revealed a significant negative correlation between the maximum rate of polymerization shrinkage and peak time(AF:R=-0.933, Z1:R=-0.892, SF:R=-0.883), and a significant positive correlation between the maximum rate of polymerization shrinkage and square root of the light intensity(AF:R=0.988, Z1:R=0.974, SF:R=0.946). Discussion and Conclusions The polymerization rate of composite resins used in this study was proportional to the square root of light intensity. Maximum rate of polymerization shrinkage as well as peak time can be used to compare the polymerization rate. Real-time volume method using IB system can be a simple, alternative method to obtain the polymerization rate of composite resins.

백금과 이리듐을 첨가한 zeolite촉매를 사용한 린번엔진으로부터의 질소산화물 제거

배재호,서해근,신병선,정석진 慶熙大學校 材料科學技術硏究所 1998 材料科學技術硏究論集 Vol.11 No.-

Under lean burn condition region, main hazard exhaust components are NOx and abundant hydrocarbons. Therefore, NOx abatement using hydrocarbon reductant was most desirable. During last twenty years, NO direct decomposition reaction by Cu-ZSM-5 was suggested with strong possibilities. However, at actual engine exhaust condition(i.e. hydrothermal atmosphere) that wasn't work its own function. In this paper, we tried in order to overcome these disadvantages, other precious metal, especially Pt, Ir, Rh ion exchanged zeolite catalysts were used for lean deNOx catalysis.

鋪裝道路(Asphalt) 沿邊의 公害 物質이 蠶作에 미치는 影響 : (Ⅱ) 公害 物質이 繭層比率에 미치는 影響 (Ⅱ) The effect of air pollution on CoCoon layer ratio

文炳圓,金鎭雨,崔周鎬 진주산업대학교 1983 論文集 Vol.21 No.-

1) 鋪裝 沿邊의 公害物質이 견층비율에 큰 영향을 나타난다. 2) 春蠶, 秋蠶 晩秋蠶 飼育에 대한 公害의 影響은 매우 차가 심하여 견층 비율은 각 계절간에 다양하게 나타났다. 3) 桑園 肥培管理를 철저히하여 누에 生理에 유의하여 公害를 다소나마 防止해야겠다. 4) 綜合的인 公害 방지책을 硏究해야겠다. This study was Carried out to investigate the effect of airpollution substance on raising silkworms and the way reducing the damoge of a public nuisance. The result obtained were summarized as follows: 1. Imjury of air pollution substanel at the areaa asphalt road was increased more than Cocoon layer ratio of a hilly country. 2. As the effect of public hagard about the raising silkworms in the spring, fall and late­fall showed very difference, Cocoon lager ratio was varietal to the treatment of season all. 3. I think that we must reduce the damage of air pallution as think over the silkworm physiology.

STS 316L의 열간 정하중 변형 거동에 미치는 결정립 크기의 영향

노연호,임병수 成均館大學校 科學技術硏究所 2000 論文集 Vol.51 No.1

The effect of grain size on the high temperature static tensile deformation behavior of STS 316L was investigated. Specimens with grain size of 30, 65 and 125㎛ were prepared through various heat treatments and the relationship between grain size and the changes in the fractional portion of three deformation stages was investigated. Fractal surface observation by SEM suggested that there might have been the specific role of grain sizes and some effect of cavities on rupture life. It was shown that the fracture mode of 316L changed from transgranular to intergranular with increasing grain size.

기-액병류상향 고정층반응기에서 액체의 흐름과 축방향분산

함병호,조지훈,편무실,김태옥,손민일 明知大學校 産業技術硏究所 1996 産業技術硏究所論文集 Vol.15 No.-

For upward cocurrent gas-liquid flow in a fixed bed reactor, the flow and axial dispersion of liquid were investigated in an air-water-Zeolite particle system. Based on experimental residence time distributions, parameters of mixing models were evaluated with two proposed liquid mixing models: axial dispersion model with stagnant zone(DSM) and plug flow model with stagnant zone(PFM). Accordingly, the applicability and parameters of each mixing model were analyzed for various operating conditions. We found that the flow and axial mixing characteristics of liquid could be analyzed well by DSM and parameters were well estimated by curve fitting using trial and error method. Also, the fraction of stagnant zone was decreased with increasing liquid velocity, while the dimensionless mass transfer coefficient between dynamic and stagnant zones was increased, and these parameters estimated by DSM were lower than those by PFM. In dynamic zone, calculated Peclet number were increased with increasing liquid velocity and axial mixing characteristics of liquid tended to access to plug flow for the high liquid Reynolds number(about Re1>50). For the porous catalyst particle system the flow and axial mixing characteristics of liquid had nearly same tendency that for the nonporous particle(glass bead) system, while dimensionless mass transfer coefficient was lower value than that for it. In these conditions, correlations of these parameters were obtained for various operating conditions.

鹽生植物 나문재의 生育特性과 利用可能性

이봉호,문윤호,정병춘,김관수,류수노 한국국제농업개발학회 2002 韓國國際農業開發學會誌 Vol.14 No.2

기능성식품 원료, 채소, 식물성 소금 재료 및 제염식물 등으로 개발이 유망시되는 염생식물인 나문재의 육지부 재배 가능성을 조사하고, 내륙지방에서의 작물화 가능성을 검토코자 전남 서해안의 염전 부근에 자생하는 나문재의 종자와 식물체를 공시하여 내륙지방인 전남 무안군 소재의 『목포시험장』포장에서 시험하였던 바 그 결과를 요약하면 다음과 같다. 가. 나문재는 식물체를 이식하여도 생육이 양호할 뿐만 아니라 2년 묵은 종 자에서도 발아가 잘되었으며 발아소요 기간은 9일 정도 였고, 나문재의 생육은 소금기가 부족한 내륙에서도 비교적 양호하였으며, 병충해나 기타 재해도 거의 없어 내륙에서의 재배화 가능성이 높은 것으로 인정되었다. 나. 나문재의 생육에 미치는 소금물의 공급 효과를 검토하기 위해 1주일 간격으로 바닷물 농도의 소금물을 공급한 결과, 초장은 소금물을 공급한 것이 공급하지 않은 것 보다 양호하였으나 줄기의 굵기와 분지발생 수 는 소금물 공급효과가 크지 않았다. 다. 나문재의 생체중과 건물중은 종자파종의 경우 7월 10일 현재 소금물 처리구는 각각 주당 33.75g, 2.62g인데 비해 무처리구는 각각 23.52g, 1.84g으로서 소금물 처리구가 무겁고, 생체중에 대한 건물중의 비율은 대체로 7.14∼11.58% 범위로서 수분함량은 92.86∼88.42%정도 되는 다육식물 이었다. 라. 결론적으로 나문재는 소금기가 많은 곳에서 잘 생육할 뿐만 아니라 소금 기가 적은 곳에서도 생육이 비교적 양호하며, 식물전체에 짠맛을 가지고 있으므로 식물성 소금, 기능성 식품, 채소, 그리고 간척지나 음식물쓰레기의 염분제거 식물로서의 이용 가능성 등에 대한 보다 면밀한 검토가 필요하다고 보여진다. The plant of halophyte, Suaeda asparagoides MIQ, which is mainly inhabit on tidal flat was investigated on their growth characteristics and cultural traits on inland condition, in order to get some informations on it's possible use for functional food, vegetables, medicinal herb, and salt removing plant from tideland, or food-waste. The plant, Suaeda asparagoides M_IQ., is well grown on inland condition. But the salt applicated plants were better than those of the non-treated plants in its vegetable growth. The plant height is about 78.5cm in salt application, compared to the 64.5cm in non-treated plot. But the stem diameter and the number of branches are not better in salt application compared to the non-treated ones. However, the fresh weight and dry weight of the plant in salt-application are better than those of the non-treated ones, which means the total biomass is more productive by the salt application. As a conclusion, the plant Suaeda asparagoides M_IQ, seems to be an available plant and need to more discussion for possible use mentioned in the above sectors, from the results of inland cultivation of which well grown and characteristics.