‘D’ 대학교 도서관 공간의 사용자 유용성, 사용성 평가를 통한 개선방향 연구

임창곤(Lim, Chang-Gon),이재훈(Lee, Jae-Hoon) 대한건축학회 2018 대한건축학회 학술발표대회 논문집 Vol.38 No.1

The purpose of this study is to identify changes in university libraries that are undergoing change, and to suggest improvement directions based on user needs of university library spaces that have not yet changed. I looked at the conceptual change and trend of library according to the age. Also, we analyze the space situation of the current library through the drawings, and actively grasp the needs of the users through usefulness evaluation and usability evaluation through questionnaires. As a result, it is necessary to improve some spaces, suggest five improvement methods such as change of movement line and relocation of thread, and it is helpful to suggest future direction of university library, but more detailed follow - up study is needed.

알칼리 전해액의 상호작용에 의한 Stainless Steel 주성분의 변화 분석

변창섭,임수곤,김수곤,최호상,신훈규,Byun, Chang-Sub,Lim, Soo-Gon,Kim, Su-Kon,Choi, Ho-Sang,Shin, Hoon-Kyu 한국전기전자재료학회 2013 전기전자재료학회논문지 Vol.26 No.7

In this paper, We studied the change of surface and variation of elements on both electrodes of hydrogen generator of alkaline electrolysis in use of FE-SEM and SIMS. We used the stainless steel 316(600 ${\mu}m$) as electrode in condition of 25%KOH, $60^{\circ}C$ Temperature. The results show that the intensity of elements (C, Si, P, S, Ti, Cr, Mn, Fe, Ni, Mo) of Positive Electrode are decreased as much as about $10^1{\sim}10^3 $than the original electrode. Thickness of Positive Electrode is decreased about 40 ${\mu}m$ after chemical reaction. The negative electrode, however, shows a slight variation in the intensity of elements (C, Si, P, Fe, Ni, Mn, Mo) but Change of thickness and surface' shape of electrode show nothing after chemical reaction. The change in thickness and variation of Stainless Steel 316 cause the lifetime of electrode to be shorted. We also observed hydrogen, oxygen, potassium in both electrodes. Especially, The potassium is increased in proportional with depth of positive electrode. this means the concentration of alkali solutions is changed. and so we have to supply alkaline solution to generator in order to produce same quantity of hydrogen gas continuously. we hope that this study gives a foundation to develop the electrode for hydrogen generator of alkaline electrolysis.

정신분열병에 대한 리스페리돈의 효과 및 안정성

이민수,김용구,김영훈,연병길,오병훈,윤도준,윤진상,이철,정희연,강병조,김광수,김동언,김명정,김상훈,김희철,나철,노승호,민경준,박기창,박두병,백기청,백인호,손봉기,손진욱,양병환,양창국,우행원,이정호,이종범,이홍식,임기영,전태연,정영조,정영철,정인과,정인원,지익성,채정호,한상익,한선호,한진희,서광윤 大韓神經精神醫學會 1998 신경정신의학 Vol.37 No.1

연구목적 : 본 시험의 목적은 임상시험 시작전에 연구자들을 대상으로 PANSS Workshop을 통하여 PANSS, ESRS에 대한 국내에서의 표준화 작업을 구축하고 새로운 정신병 치료제인 리스페리돈의 효과와 안정성을 재확인하여 리스페리돈 사용에 대한 적정화를 이루는데 있다. 연구방법 : 1996년 4월부터 1996년 9월까지 국내 39개 대학병원 정신과에 입원중인 혹은 증상이 악화되어 입원하는 정신분열병 환자 377명을 대상으로 다시설 개방 연구를 시행하였다. 1주일간의 약물 배설기간을 가진후, 리스페리돈을 8주간 투여하였고, 기준점, 1주, 2주, 4주, 그리고 8주후에 평가되었다. 용량은 제1일에는 리스페리돈 1mg씩 1일 2회, 제2일에는 2mg씩 1일 2회, 제3∼7일에는 3mg씩 1일 2회 투여하였다. 이후 환자의 임상상태에 따라 임의로 증량할 수 있으며, 최대 일일 16mg을 초과하지 않도록 하였다. 추체외로 증상을 조절하기 위한 투약을 허용하였다. 임상증상 및 부작용의 평가는 PANSS(Positive and Negative Syndrome Scale), CGI(Clinical Global Impression) 그리고 ESRS(Extrapyramidal Symptom Rating Scale)을 사용하였다. 연구결과 : 377명중 343명(91%)이 8주간의 연구를 완결하였다. 치료 종결시점인 8주후 PANSS 총점수가 20% 이상 호전된 경우를 약물 반응군으로 정의할때, 약물반응군은 81.3%였다. 리스페리돈에 반응하는 예측인자로는 발병연령, 이전의 입원 횟수, 유병기간이 관련 있었다. 리스페리돈은 1주후부터 PANSS양성, 음성, 및 일반정신병리 점수상에 유의한 호전을 보여 효과가 빨랐다. CGI의 경우도 기준점에 비해 1주후부터 유의한 감소를 나타내었다. ESRS의 경우, 파킨슨 평가점수는 기준점과 비교해 투여 1주, 2주, 4주후 유의하게 증가되었다가 8주후 기준점과 차이가 없었다. Dystonia 평가점수는 1주후만 유의한 증가를 보였으며, dyskinesia 평가점수는 유의한 차이가 없었다. 혈압, 맥박수의 생명징후 및 일반 혈액학 검사, 생화학적 검사, 심전도 검사에서 유의한 변화는 없었다. 결 론 : 이상의 다시설 개방 임상 연구를 통해 리스페리돈은 정신분열병 환자에서 양성증상뿐만 아니라 음성증상 및 전반적인 증상에도 효과적인 것으로 사료된다. 보다 명확한 평가를 위해서는 다른 항정신병약물과의 이중맹검 연구가 필요할 것으로 생각되며, 또한 장기적 치료에 대한 평가도 함께 이루어져야 하겠다. Objective : The purpose of this study was to investigate the efficacy and safety of risperidone in the treatment of Korean schizophrenic patients. Method : This multicenter open study included 377 schizophrenic patients drawn from 39 university hospitals. After a wash-out period of 1 week, the schizophrenic patients were treated with risperidone for 8 weeks and evaluated at 5 points ; at baseline, and 1, 2, 4 and 8 weeks of treatment. The dose was increased from 2mg/day(1mg twice daily) to 6mg/day(3mg twice daily) during the first week and adjusted to a maximum of 16mg/day over the next 7 weeks according to the patient's clinical response. Medication to control extrapyramidal symptoms was permitted. The psychiatric and neurological status of the patients was assessed by PANSS, CGI, and ESRS scales. Results : 343(91%) of 377 patients completed the 8-week trial period. Clinical improvement, as defined by a 20% or more reduction in total PANSS score at end point, was shown by 81.3% of patients. The predictors of response to risperidone were associated older age, shorter duration of illness, fewer previous hospitalization. Risperidone had rapid onset of action ; a significant decrease of the total PANSS and three PANSS factor(positive, negative, general), and CGI was already noticed at the end of first week. For the ESRS, parkinsonism rating scores were significantly increased until week 4 comparing with baseline. Dystonia rating scores were significantly increased until week 1, and dyskinesia rating scores were not significantly changed during the study. Laboratory parameters including vital sign, EKG, hematological, and biochemical values showed no significant changes during the trial. Conclusions : This study suggests that risperidone is generally safe and effective against both the positive and negative symptoms in our group of patients.

경상남도 창녕에서 집단 발생한 피부 탄저병의 임상양상

박찬원,박정래,정종윤,이선희,장철훈,오차재,조병만,임재영,오창근,권경술 대한감염학회 2002 감염 Vol.34 No.4

PET/CT 검사에서 환자체형에 따른 적정검사 프로토콜에 관한 고찰

조석원,함준철,강천구,반영각,이승재,임한상,이창호,박훈희,Cho, Seok Won,Ham, Joon-Chul,Kang, Chun Goo,Bahn, Young Kag,Lee, Seung Jae,Lim, Han Sang,Lee, Chang-Ho,Park, Hoon-Hee 대한핵의학기술학회 2013 핵의학 기술 Vol.17 No.2

Purpose: Whole-body PET using radiopharmaceutical is one of the imaging study methods for physiological changes of body. High specificity of the PET-CT examination is used to detect an early stages of cancer and metastatic cancer by imaging a physiological changes. During the imaging process, PET image has been characterized by a relatively low image quality due to its low sensitivity and the acquisition of random and scatter coincidences as well as patients figure. Therefore, the image quality as the changes of the acquisition times of patient weight was evaluated in this study. Materials and Methods: Thirty patients who presented to our hospital were enrolled. They were divided to normal, overweight, and obese group using BMI index, respectively. The patients with a liver disease and diabetes were excluded. $^{18}F-FDG$ was administered to the patients as 5.2 MBq per kg. After an hour from an injection, image acquisition was obtained as List mode in a part of liver in 1 bed. SNR (signal-to-noise ratio) of each groups acquisition times were confirmed from the calculated radiation counts and random fractions. The statistical significance of three groups was confirmed through one-way ANOVA test. On the basis of the counts of 2 minutes on normal group, the SNR of overweight group and obese group were compared. Results: The SNR were increased with loger aquisition time in 3 groups. In the condition of same acquisition time, the SNR had a statistical significance (P<0.05). The SNR were decreased to the normal, overweight, and obese, respectively. Liver activity had no significance difference on each group and RF had the significance differences (P<0.05). On the basis of the counts of 2 minutes on normal group, there were no statistical significance in a three minute acquisitions of overweight group and two minute acquisitions of obese group (P=0.150). Conclusion: In this study, the administrated amount of radiation dose did not adjust as the change of the patients weight. Increasing the acquisition time when the administration of the same amount of dose was able to get a good result of SNR. When the Based 2 minute on normal group, if overweight and obese case the increased acquisition time of 3 minute was able to obtain a similar SNR. On the basis of the normal group, the acquisition times of overweight and obese group were increased to 3 minutes per bed and the SNR were similar to the normal group.

비소중독된 흰쥐의 장기중 비소 축적에 미치는 팔진탕의 영향

임종필,서은실,김훈,강창수 又石大學校 1998 論文集 Vol.20 No.-

Sodium arsenate and Paljin-Tang extract, a herbal restorative were treated p.o. 20 ㎎/㎏ and 500 ㎎/㎏, respectively, and concurrently to rats, and examined the variation of body weight, the accumulation of arsenic in organs. The results obtained in this study were as follows: 1. Paljin-Tang extract (PJT) resulted in the increase of body weight and the increase ratio of body weight in arsenic-treated group was dropped but the group of concurrent administration with PJT showed significant recovery. 2. The accumulation of arsenic in liver of arsenic-treated group increased but the group of concurrent administration with PJT showed significant decrease compared with arsenic-treated group. 3. The ratio of liver weight / body weight of arsenic-treated group increased but the group of concurrent administration with PJT showed significant decrease compared with arsenic-treated group.

지능형 정속주행 제어시스템 개발

임영도,설재훈,한창훈,김승철,박종오,이준탁,방석원 東亞大學校 附設 情報通信硏究所 1998 情報通信硏究所論文誌 Vol.6 No.1

This paper describes an intelligent cruise control system for automobile. With the remarkable numericalincrease of automobiles on the roal, the optimized traffic flow control using the cruise control is one of the very important traffic problems to overcome the limitation of an existing road capacity. Based onthis idea that minimize the fuel cost and teh air pollution, and accept a driver's needs for driving, we have developed an intelligent cruise control system for vehicle. This proposed intelligent fuzzy cruise controller was successfully implemented using the fuzzy algorithm, the i80c196 μ-controller board and the throttle valve actuator. The field test results on an linear road was introduced.

직접수복용 레진과 기공용 레진으로 제작한 레진 인레이를 투과한 광중합기의 광강도

장훈상,임영준,김정미,홍성옥 大韓齒科保存學會 2010 Restorative Dentistry & Endodontics Vol.35 No.5

연구목적: 본 연구는 직접수복용 레진 (Filtek Z350, Supreme XT)과 기공용 레진 (Sinfony)으로 제작한 레진 인레이를 투과하는 광중합기의 광강도를 측정하고 레진 인레이를 구성하는 색조에 따라 투과되는 광강도를 측정하였다. 연구 재료 및 방법: A3 색조의 레진 인레이를 Z350 A3 한 가지 색조로 제작한 것과 Supreme XT A3B와 A3E 두 가지 색조로 제작한 것을 이용하였으며 Sinfony는 제조사의 지시에 따라 A3, E3, T1 세 가지 색조로 제작하였고 두께는 1.5 mm로 통일하였다. 할로겐 광중합기 (Optilux 360)와 LED 광중합기 (Elipar S10)를 이용하여 레진 인레이를 투과하는 광강도를 휴대용 광강도 측정기 (Cure Rite)로 측정하였다. 각 레진의 색조가 광강도의 투과에 미치는 영향을 분석하기 위해 0.5mm 두께로 레진 시편을 제작하여 광강도를 측정하였다. 결과: Z350 A3로 제작한 레진 인레이를 투과한 광강도가 가장 낮았으며, 다음으로 Supreme XT A3B와 A3E로 제작한 레진 인레이, 그리고 Sinfony A3, E3, T1으로 제작한 레진 인레이 순으로 광강도가 유의하게 증가하였다 (p < 0.05). 0.5mm의 레진 시편을 투과한 광강도를 측정한 결과 dentin shade인 Sinfony A3, Z350 A3, Supreme XT A3B가 가장 낮았으며, enamel shade인 Supreme XT A3E, Sinfony E3, 그리고 translucent shade인 Sinfony T1 순으로 유의하게 증가하였다 (p < 0.05). 결론: 레진 인레이를 제작할 경우 단색의 직접 수복용 레진을 사용하기 보다는 기공용 레진의 dentin shade, enamel shade, translucent shade를 모두 사용하는 것이 레진 인레이 하방으로 더 많은 중합광을 투과시킬 수 있는 것으로 사료된다. Objectives: The purpose of this study was to measure the power density of light curing units transmitted through resin inlays fabricated with direct composite (Filtek Z350, Filtek Supreme XT) and indirect composite (Sinfony). Materials and Methods: A3 shade of Z350, A3B and A3E shades of Supreme XT, and A3, E3, and T1 shades of Sinfony were used to fabricate the resin inlays in 1.5 mm thickness. The power density of a halogen light curing unit (Optilux 360) and an LED light curing unit (Elipar S10) through the fabricated resin inlays was measured with a hand held dental radiometer (Cure Rite). To investigate the effect of each composite layer consisting the resin inlays on light transmission, resin specimens of each shade were fabricated in 0.5 mm thickness and power density was measured through the resin specimens. Results: The power density through the resin inlays was lowest with the Z350 A3, followed by Supreme XT A3B and A3E. The power density was highest with Sinfony A3, E3, and T1 (p < 0.05). The power density through 0.5 mm thick resin specimens was lowest with dentin shades, Sinfony A3, Z350 A3, Supreme XT A3B, followed by enamel shades, Supreme XT A3E and Sinfony E3. The power density was highest with translucent shade, Sinfony T1 (p < 0.05). Conclusions: Using indirect lab composites with dentin, enamel, and translucent shades rather than direct composites with one or two shades could be advantageous in transmitting curing lights through resin inlays.

MATLAB을 이용한 자동차 정속주행 시뮬레이션

한창훈,김승철,박종오,박재현,임영도 東亞大學校 附設 情報通信硏究所 1997 情報通信硏究所論文誌 Vol.5 No.1

An advanced Fuzzy Controller to cruise on the longitudinal road intelligently is proposed in this paper. Typically the vehicle model is represented by velocity, due to its dynamic property and non-linearity. Linear acceleration controller described as the first Fuzzy Controller of most effective control method is applied mainly and the second one based on linguistic description for riding sensitivity is linked with the first and applied. A designed controller is evaluated under MATLAB SIMULINK simulation after it being adapted for virtual vehicle model.

도시지역에서 선행강우지수를 고려한 저수유출 시뮬레이션 모형

허창환,임기석,송시훈,지홍기 대한상하수도학회 2003 상하수도학회지 Vol.17 No.1

This study is aimed at the development of a deterministic runoff model which can be used for low flow runoff. The model is formulated by the watershed runoff model. Based on the assumptions that runoff system is nonlinear, the proposed watershed runoff models are the conceptual model and artificial neural network model. In the model structures, the conceptual model divide the runoff system into a surface structure and a subsurface structure corresponding to the surface flow, and inter flow and ground water flow. The lag time effect of surface can be represented by the sub-tank of surface structure in the conceptual model. Fifteen neural networks models using Quasi-Newton technique were prepared to find the optimum parameters with each of them having different numbers of hidden layers and hidden layers nodes. The parameter calibration of inter flow and ground water flow in the subsurface structure of the conceptual model is made by separating the components with numeric filter. The runoff coefficient (α_2, K_1) is expressed as the function of antecedent precipitation index (API) in the conceptual model. The parameters related to the surface flow can be calibrated with the runoff coefficient (α_1, α_11, C_1, C_2) in the conceptual model. In the conceptual and ann model an algorithm are developed to calibrate the parameters automatically based on efficiency criteria. The conceptual model shows more closely to the observed hydrograph than ann model.