크론병에 대한 CoPPLX의 방어효과에 대한 연구

이호학,김유림,문창기,이재일,양병윤,김종수,이정민,정재혁,안석진,박상준,김윤권,김소연,김영중,조민구,최영자,장성조 圓光大學校 醫科學硏究所 2005 圓光醫科學 Vol.20 No.1

유동성 복합레진의 마모저항성에 관한 연구

윤연희,김정욱,이상훈,한세현 大韓小兒齒科學會 2002 大韓小兒齒科學會誌 Vol.29 No.2

시술시간을 줄이는데 유리한 재료인 유동성 복합레진을 유구치부에 사용하려고 고려할 때 중요한 물성 중 하나는 마모저항성이다. 이 연구의 목적은 유동성 복합레진의 마모저항성을 일반복합레진의 마모저항성을 비교하는 것이다. 실험에 사용된 유동성 복합레진으로 1군에서는 Arabesk flow (VOCO, Germany), 2군에서는 Tetric flow (Vivadent, Liechtenstein), 3군에서는 Aeliteflow (Bisco, U.S.A), 4군에서는 Filtek flow (3M Dental Co, U.S.A)을 사용하였으며 대조군으로 사용한 5군의 복합레진은 Z100 (3M Dental Co, U.S.A)이었다. 시편들(n=10)은 두께 2mm, 지름 5mm의 원통모양으로 제작하여 마모시험 전 37℃의 증류수에서 7일 동안 담가 놓았다. 제1소구치와 레진시편을 MTS 시스템에서 2Hz로 50,000회 접촉, 마모시켰다. 마모시험시 lateral excursion은 0.4mm, 교합력은 2-100N의 조건이었다. 마모시험후 마모된 부피, 최대마모깊이, 재료자체의 표면경도를 측정하였고 마모되지 않은 표면과 마모가 일어난 표면을 주사전자현미경으로 관찰하였으며 다음과 같은 결과를 얻었다. 1. 마모된 부피는 3군에서 가장 적었고 4군에서 가장 많았으며 3군<1군<2군<5군<4군의 순서로 증가하였다. 2. 3군, 1군, 2군, 5군이나 4군에 비해 통계적으로 유의하게 마모부피가 적었다(P<0.05). 그러나, 3군, 1군, 2군 사이에서와 5군, 4군 사이에서는 각각 통계적으로 유의한 차이가 없었다. 3. 최대마모깊이는 1군에서 가장 낮았고, 4군에서 가장 깊었으며 1군<3군<5군<2군<4군의 순서로 증가하였다. 4. 5군의 표면경도는 다른 유동성 복합레진군에 비해 통계적으로 유의하게 높았으나(P<0.05). 마모부피나 최대마모깊이와는 통계적으로 유의한 상관관계를 보이지 않았다. 5. 마모되지 않은 표면과 마모가 일어난 표면을 주사전자현미경으로 관찰한 결과, 유동성 복합레진군과 5군 사이에 마모양상이 다르게 나타나는 것을 볼 수 있었다. When we use the flowable resin on the primary molars for quick handling, one of the most important property is the wear resistance. This study was performed to compare the wear resistance characteristics of four flowable composite resins [Arabesk flow (group 1), Tetric flow (group 2), Aeliteflow (group 3), Filtek flow (group 4)] to that of one control composite resin [Z100 (group 5)]. Specimen discs(n=10), 10mm wide and 2mm thick, were stored in distilled water at 37℃ for 7 days prior to testing. The specimens were subjected to 50,000 strokes at 2Hz on the MTS system. During the test, the following parameters were maintained: the ;atera; excursion at 0.4mm, occlusal force at 2-100N with a force profile in the form of a half sine wave. The measurements of volume loss, depth of wear, and Vicker's hardness number of composite resins, and SEM obserbations of the polished and abraded surfaces were established. One-way ANOVA and Scheffe's multi-ple comparison test were employed to detect statistically significant differences among the flowable composite resin group and the control composite group at P<.05. The following results were obtained: 1. Group 3 showed the least volume loss, while group 4 showed the greatest. The mean volume loss increased in the following order: group 3<group 1<group 2<group 5<group 4. 2. Group 3, group 1, and group 2 showed significantly lesser volume loss compared to group 5 and group 4(p<0.05). However, There was no statistically significant difference among group 3, group 1 and group 2. There was no statistically significant difference between group 5 and group 4. 3. Group 1 showed the shallowest depth of wear, while group 4 showed the deepest. The mean depth of wear increased in the following order: group 1<group 3<group 5<group 2<group 4. 4. Group 5 showed significantly highest hardness value compared to the flowable composite resin groups(p<0.05), but there was no correlation between wear resistance and Vickers hardness number. 5. SEM observation of the unworn and worn surfaces revealed the differences in the wear appearance between the flowable composite resin groups and the control.

地中送電관의 최적 되메움재 선정을 위한 열특성 硏究

윤성중,류권일,고영헌,김팔규 忠南大學校 産業技術硏究所 2003 산업기술연구논문집 Vol.18 No.2

The purpose of this paper is development of the most suitable backfill material which increases thermal stability and decreases thermal resistances for increasing capacity of the transmission of electricity. In order to proceed this study, the sand which recently was used as backfill material and the stone dust as single material for most suitable backfill material was chosen and experiments on thermal character and basic soil properties were proceeded for appreciating stability and economical efficiency. As a result of this study, natural moisture content of stone dust was higher than that of sand and porosity of stone dust and thermal resistance of stone dust was lower than that of sand. Then the stone dust are expected to increase capacity of the transmission of electricity. In point of stability, because total strain of pipe was within allowed strain, two materials are expected to ensure against risks. Stone dust is considered as useful backfill materials by contributing great economical efficiency, because a price of stone dust is half to the sand.

고혈압 환자들의 건강행태

김석범,강복수,윤성호,황정희,이경수 韓國保健敎育.健康增進學會 2000 보건교육건강증진학회지 Vol.17 No.1

This study was conducted to examine health behaviors in hypertensive patients and the factors that would affect these healthy life-styles, and to provide basic data for effective and continuous hypertension control in private medical facilities. Among those patients diagnosed as hypertension who had visited the Department of Internal Medicine of Yeungnam University Hospital during the two month period from August 2 to September 30, 1999, the present study included 222 patients who were in more than one month after the initial diagnosis of hypertension and those who had hypertension for less than 10 years. Using a structured questionnaire, the present study was conducted by a self-administered survey method, and the obtained data were analyzed with t-test, χ2-test and one-way analysis of variance using the SPSS statistical program. The scores on knowledge related to hypertension were higher as the education level of a patient was higher(p〈0.05). As for occupation, those who performed office or management jobs showed higher scores than those who were into manufacturing jobs, and as for economic status, although those patients who were in middle class showed highest scores, however, no statistical significance was observed. The scores of knowledge on hypertension was higher when the family history hypertension was present(p〈0.05). The scores of health-related behaviors were higher with higher education level and higher economic status, higher in those with family history of hypertension, and higher in those with office or management jobs than those who had manufacturing jobs(p〈0.05). Blood pressure measurement on regular basis was performed most frequently in those who were between 50∼59 years old with 83.3% and was least frequent in those who were older than 70 years old with 50%(p〈0.05). The frequency of regular blood pressure measurement was higher with higher education level, higher economic status, higher in those with family history of hypertension, and the highest in those with management position with 93.5%, however, on statistical significance was observed. Changes in health-relaxed behaviors after hypertension diagnosis were higher with higher education level, higher economic status, and in those patients performed office or management work. In particular, diet change was observed in female and higher economic status and smoking cessation was observed in 60∼69 years old. Housewives and office workers or managers have taken exercise more regularly and those who had management jobs and had high scores on knowledge related to hypertension would participate health education program more actively. Thus, for improving health-related behaviors for continuous management of hypertension, changes in health-related behaviors can be followed through conduction health education to improve understanding of knowledge related to hypertension as the method of helping to improve changes in health life-styles in those with little education and those in low economic status.

한방약물로부터 항고지혈증 치료약물개발(3) : In vitro에서 가미과루해백황금탕 및 구성약물의 항고지혈증 활성 Antihyperlipidemic Effects of Gamigwaruhaebaekwhanggum-Tang and Its Constituent Herbal Medicines in vitro

정은아,김남재,김윤경,김동현,이상인 경희대학교 동서의학연구소 2001 東西醫學硏究所 論文集 Vol.2001 No.-

80% extract of Gamigwaruhaebaekbaekju-Tang (GGHBT), Gagamgwaruhaebaekbaekju-Tang (GGGHBT) and Gamigwaruhaebaekwhanggum-Tang (GGHWT) remarkably showed inhibitory effects on HMG-CoA reductase, lipid peroxidation of rat liver and LDL oxidation, and DPPH free radical scavenging effect in a dose-dependent manner. Especially, GGHWT which is formulated with Trichosanthis Fructus, Pinelliae Tuber, Aurantii Immaturus Fructus, Magnolia Cortex, Allii Macrostemi Bulbus, Cinnamomi Ramulus and Scutellariae Radix on the basis of Gwaruhaebaekbaekju-Tang listed on the traditional medicinal references showed more effective hypocholesterolemic activities in vitro bioassay than the other prescriptions.

다환계 방향족 유기오염물을 함유한 폐수의 전기화학 처리

윤영재,강태구,김희정,노성희,김선일 한국공업화학회 2003 응용화학 Vol.7 No.1

This work has concerned the possibility to apply both direct and indirect electrolysis process for the treatment of waste containing poliaromatic compounds. Two different kinds of electrode materials have been used: DSA-type anodes to carry out direct electrolysis and carbon felt cathodes to ferform indirect electrolysis. On the contrary, in the case of the tested wastewater especially containing naphthalen- and anthraquinon sulphonic compounds they do not seem to be very suitable materials. Better results have been achieved using the carbon felt cathodes. In this case the COD of the tested wastewater can be remarkably decreased using H_2O_2 as oxidation agent.

저체중 또는 과체중 청소년에서 캠프 프로그램을 이용한 영양 교육효과에 관한 연구

성미경,승정자,류화춘,박재년,박동연,최미경,조경옥,최선혜,이윤신,김유경,이은주 대한지역사회영양학회 2003 대한지역사회영양학회지 Vol.8 No.4

This study was performed to evaluate the effectiveness of a nutrition education program developed for nutritionally imbalanced adolescents. A summer nutrition camp was held for 23 overweight and 16 underweight subjects. Its effectiveness with regard to was evaluated at the end of the camp and 6 months later. Nutrition knowledge, nutritional attitude, food behavior, nutrient intake, exercise habit and ideal body figures desired by the subjects. The results showed significantly higher nutrition knowledge scores at the end of the camp as compared to those obtained prior to the camp program, and these scores were maintained for at least six months. Nutrition attitude scores also improved after the education program, and these improved scores also lasted for 6 months. However, the food behavior scores measured 6 months after the education program were not significantly different from those obtained prior to the camp. Also, the exercise habit, the ideal body figures and the body figures desired by the subjects remained unchanged. When nutrient intakes of subjects were assessed before the program and 6 months later, the mean daily vitamin C intake was significantly increased after the education program. Also, the intake of iron from plant food sources increased in the overweight subjects, while less iron from animal source were consumed by the underweight subjects. Both groups tended to consume more vegetables and fruits 6 months after the education program which may have contribute to the higher vitamin C and plant-based iron intakes. These results indicate that a 4-day nutrition education camp program sustained changes in nutrition knowledge and nutrition attitude for 6 months. The increased intake of vegetables and fruits was also achieved through this education program. However, changes in dietary behavior in adolescents may require repeated education.

냉기 치료에 따른 둔근에서의 피부 및 근육내 온도 변화

정우성,김미정,박시복,이상건,김영호,양길태,장윤희 大韓再活醫學會 1998 Annals of Rehabilitation Medicine Vol.22 No.2

철근콘크리트 구조물의 염소이온 확산과 슬립특성에 관한 연구

정우영,안병윤,백상훈 국립7개대학공동논문집간행위원회 2005 공업기술연구 Vol.5 No.-

It has been brought to our attention that there has been an increase in the number of large scale constructions on sites where damages from sea wind(or water) are noted. The problem with these particular structures are that they are likely to be targets for invasions by chloride. This experiment is to study diffusion of chloride ions within the concrete, and corrosion of reinforced concrete as a result of its spread. In order to find out the slip characteristics of chloride ions and reinforced concrete, MIDAS and ABAQUS, among several other commercial structural analysis program, were deployed in the study.

효율적인 일정계획에 의한 제조실행 제어

정인성,이윤상,이상복,왕지남 대한설비관리학회 2004 대한설비관리학회지 Vol.9 No.4

In this paper, we develop scheduling system under MTO (Make-To-Order) Production and implement it to real application. Generally, scheduling system is regarded as company specific problem such that the required business logic might be different within a same industry. The differences are caused by different constraints of each company requirements. Company specific algorithms are commonly employed using rule-base or heuristic procedure. Based on these characteristics, heuristic procedure are developed and implemented for developing MES (manufacturing execution system). The proposed approach are applied to real industry and proved as an efficient approach in terms of practical views.