연령증가에 따른 혈압요소들의 좌심실비대 및 관동맥질환과의 관련성

박재석,박창규,박미영,박재형,김용현,나진오,신성희,서순용,홍순준,박성미,임홍의,김응주,서홍석,오동주,노영무 대한순환기학회 2004 Korean Circulation Journal Vol.34 No.2

Effect of Impact Velocity on Interface Characteristics of HT‑9 Steel Joints Fabricated by Magnetic Pulse Welding

Jun‑Woo Song,Jin‑Ju Park,Gyoung‑Ja Lee,Min‑Ku Lee,Kyu‑Hyun Park,Soon‑Jik Hong,Jung Gu Lee 대한금속·재료학회 2020 METALS AND MATERIALS International Vol.26 No.3

The weldability window in magnetic pulse welding (MPW) is proposed for the end-closure joining of HT-9 steel tubularworkpieces. Based on both theoretical and experimental investigations, the impact velocity of the flyer tube at the momentof collision had a dominant effect on the bonding characteristics of the resultant joints and the optimal impact velocity wasestimated to be in the range of 265–290 m/s in this alloy system. Under the optimal process conditions, no leak was detectedduring helium leak testing. Moreover, the integrity of the joint interface was preserved until the tube section ruptured duringinternal pressure burst testing. For HT-9 steel, the ductile δ-ferrite phase produced by the localized interfacial melting duringMPW acted as an effective obstacle to crack propagation, thereby enhancing the fracture resistance of the joint interface. Allof the results demonstrated the high integrity and durability of the HT-9 steel tube assembly fabricated by the MPW process.

서울의 Penicillinase Producing Neisseria gonorrhoeae 발생빈도(1998)

김재홍,김준호,반재용,이정우,황성주,정준규,정성태,강진문,조흔정,홍창의,정혜신,이한승,김이선,이봉길,이종호,선영우,한기덕,윤성필,이성훈,안종성,박석범,문승현,조항래,김형섭,류지호,황재영,박준홍,손상욱 한양대학교 의과대학 2001 한양의대 학술지 Vol.21 No.1

In recent years, gonorrhea has been pandemic and remains one of the most common STDs in the world, especially in developing countries. For the detection of a more effective therapeutic regimen and assessing the prevalence of Penicillinase Producing Neisseria gonorrhoeae(PPNG), we have been trying to study the patients who have visited the Venereal Disease Clinic of Choong-Ku Public Health Center in Seoul since 1980 by menas of the chromogenic cephalosporin method. In 1998, 93 strians of N. genorrhoeae were isolated, among which 60(64.5%) were PPNG. The prevalence of PPNG in Seoul, which had been decreased to 39% in 1996 after a peak of 74.3% in 1993, is increased to 64.5% in 1998.

Clinical usefulness of infrared thermal imaging as a non-invasive screening test for diagnosis of vascular malformations

( Chihyeon Sohng ),( Jun Hong Park ),( Won Kee Lee ),( Jun Young Kim ),( Yong Hyun Jang ),( Weon Ju Lee ),( Seok-jong Lee ) 대한피부과학회 2018 대한피부과학회 학술발표대회집 Vol.70 No.2

Background: Infrared thermal imaging (ITI), aka thermography, has been used widely in medicine, but been studied rarely its clinical application in vascular malformations (VMs). Objectives: This study investigated validity and usefulness of ITI as a new screening test to differentiate between capillary malformation (CM) and arteriovenous malformation (AVM). Methods: This study included 50 patients with VMs who conducted ITI between 2011 and 2018. They were divided into two groups; CM and AVM, and those with Parkes-Weber syndrome (PWS) were also included in AVM group. Temperature difference (ΔT) between lesional and contralateral non-lesional area was compared using ITI to calculate the maximum ΔT (ΔTmax). The receiver operating characteristic (ROC) curve was then plotted to determine optimal cutoff value of ΔTmax. Results: Of the total 50 patients, 34 were finally diagnosed with CM, and 16 AVM (12 pure AVM, and 4 PWS). AVM group had significantly higher ΔTmax (2.57±1.23°C) than CM group (0.69±0.50°C).The area under the curve of ΔTmax for diagnosis of AVM versus CM was 0.938. The sensitivity and specificity were showed 87.5% and 94.1% (LR+, 14.87; LR-, 0.13) in cutoff value of ΔTmax 1.39°C, and 81.3% and 97.1% (LR+, 27.62; LR-, 0.19) in cutoff value of ΔTmax 1.42°C. Conclusion: The value of ΔTmax measured by ITI was useful to distinguish AVM from CM, so ITI can be employed as a new non-invasive differential screening test for uncertain VMs.

지리산국립공원 심원계곡 생태경관 복원공사지역 식생 변화

정태준 ( Tae-jun Jung ),김연경 ( Yeon-Gyeong Kim ),김영진 ( Young-jin Kim ),정명희 ( Myung-hee Jung ),박경희 ( Kyoung-hee Park ),신창근 ( Chang-keun Shin ),박선홍 ( Seung-hong Park ),김영선 ( Young-sun Kim ) 한국환경생태학회 2021 한국환경생태학회지 Vol.35 No.3

본 연구는 지리산국립공원 심원계곡 생태경관 복원공사지역의 모니터링 결과를 분석하여 체계적인 복원관리를 도모할 수 있는 기초자료를 확보하는데 그 목적이 있다. 복원사업이 완료된 2017년도에 식생 모니터링을 위한 조사구 12개소와 대조구 4개소를 설치하였고, 2017년과 2020년의 상대우점치, 종다양도지수, 유사도 등의 변화를 분석하였다. 복원사업 시 수목이 식재되었던 조사구는 종다양도지수가 0∼1.4552로 나타났고, 대조구와의 유사도지수에서는 1개 조사구가 1.32%로 분석된 것을 제외하고 모두 0%로 나타났다. 조사구의 종다양도지수 및 유사도지수가 매우 낮은 것은 복원사업 시 식재된 수목이 고사하거나 멧돼지 피해, 유수에 의한 침식으로 유실되는 등의 영향으로 판단되었다. 반면 복원사업 시 수목이 식재되지 않은 미식재 조사구는 종다양도지수가 0.9538∼2.3222로 나타났고, 유사도지수는 최대 8.33%까지 분석되었다. 국립공원 생태경관 복원공사지역의 복원 공법 개발을 위한 장기 모니터링과, 미식재 조사구의 천이과정을 분석하는 지속적인 연구가 필요하다. This study aims to obtain basic data for systematic restoration by analyzing the monitoring results of the Shimwon Valley Ecological Landscape Restoration Project area in Jirisan National Park. In 2017, when the restoration project was completed, 12 monitoring plots and 4 control plots were installed for vegetation monitoring, and changes in the relative dominance, species diversity index and similarity between 2017 and 2020 were analyzed. The species diversity index of the surveyed areas where trees were planted during the restoration project was 0-1.4552, and the similarity index with the control group was 0% except for one survey area at 1.32%. The very low species diversity index and similarity index in the survey areas were attributed to the loss of trees planted during the restoration project due to death, damage by wild boars, or erosion by running water. On the other hand, the species diversity index was 0.9538-2.3222 in the monitoring plot where no tree was planted, and the similarity index was analyzed to be as high as 8.33%. It is necessary to continue the long-term monitoring for the development of ecological landscape restoration methods in the national park and analysis of the succession in monitoring plots where no trees were planted.

관동맥질환에서 저밀도 지단백 입자 크기의 분포

임효영,김인숙,승기배,강동헌,전두수,장기육,박준철,이수영,홍순조,최규보 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.8

ImmunoDot법에 의한 전신성 류마티스 질환의 자가항체 검사

박성환,김선준,김성일,민준기,이상헌,홍연식,조철수,김호연 최신의학사 1997 最新醫學 Vol.40 No.7

성견 절치에서 수직 골결손 형성후 함입이동시 치주조직의 반응

박양수,김영준,최홍란,황현식 전남대학교 치과대학 2000 전남치대논문집 Vol.12 No.1

The present study was performed to investigate the periodontal response following orthodontic intrusion of teeth with vertical bony defect produced by periodontal disease. Vertical bony defect and periodontal disease were produced adjacent to the both maxillary second lateral incisors in four adult dogs, weighing 20kg or more. Four weeks later, a flap operation was performed to eliminate inflammation and a reference notch was made on the root surface at the level of bottom of each defect. Two weeks after periodontal surgery, four weeks of intrusion and another four weeks of retention was executed on the right incisors while left incisors served as the control. Through the histologic analysis, following results were obtained. 1. The periodontal lesion which was produced by elastics and artificial bony defect was characterized by three walled infrabony pocket. 2. In the histologic section of control side, the base of the pocket was located below the level of the cemento-enamel junction. Connective tissue attachment was formed apically from the base of the pocket. 3. On the experimental side, the base of the pocket was localized close to the cemento-enamel junction. Connective tissue attachment was formed near to pocket base and extended apically. 4. New cementum was formed from the notch coronally toward the epithelial junction along the root surface in the both intruded incisors and control. 5. In the fluorescence microscopic observation, bone regeneration was began at the base of defect and the remodelling pattern characterized by a combination of coronal bone generation and resorption of the marginal crest could be detected. Although the remodelling pattern was the same in the both side, the bone remodelling in intruded incisors was continued during tooth movement. The results of the present study suggest that an orthodontic intrusion of extruded incisors with vertical bony defect can be carried out with a desirable periodontal response, provided that both the oral hygiene and the biomechanical force system are kept under control.

중성자에 조사된 원자로 압력용기 재료(SA508)의 Magneto-acoustic emission 효과

홍준화,박덕근,옥치일,김장환,이종규 韓國非破壞檢査學會 1999 한국비파괴검사학회지 Vol.19 No.6

원자로 압력용기 재료인 SA508 steel을 온도 70 ℃와 대기압하에서 최고 10 n/㎠까지 중성자를 조사시켜 조사량에 따른 미세경도 변화와 magneto-acoustic emission(MAE) 에너지를 측정하였다. 중성자 조사에 따른 경도의 변화는 조사량이 10 /㎠까지는 거의 일정하였으나, 조사량이 10 /㎠이상에서 급격히 증가하였다. MAE 에너지의 변화는 중성자 조사량에 따라 경도의 변화와 같은 형태로 변하였으나 그 변화량은 감소하여 그변화의 추이는 경도의 변화와는 역의 형태였고, 또한 MAE에너지의 상대적 변화와 경도 변화사이에는 아주 좋은 선형성을 보였다. 이러한 결과에서 SA508 강재는 10 /㎠이상의 중성자에 조사될 경우에 재료에 중성자 조사에 의한 미세 결함이 급격히 증가하여 전위(dislocation)이동에 대한 저항성을 나타내는 마찰경화의 증가가 경도의 증가를 유발하고, 또한 이러한 미세 결함은 자기장과의 반응에서는 90°자벽의 운동중에 자기탄성 변화를 유도하여 MAE 에너지의 감소를 유발함을 알 수 있었다. 그리고 경도의 변화량보다 MAE 에너지의 변화량이 더 크게 나타나, 중성자 조사에 의한 미세결함은 기계적 성질보다 자기적 성질에 더 민감하게 반응한다는 것을 알 수 있었다.따라서 MAE가 중성자 조사에 의한 재료의 미세 구조 결함을 비파괴적인 방법으로 평가하는 강력한 도구의 가능성이 있음을 알 수 있었다. Magneto-acoustic emission (MAE) energy and hardness were measured in the reactor pressure vessel steel (SA508 Steel) for the various neutron fluence, irradiated dose up to 10 n/㎠. The hardness was nearly a constant up to 10 n/㎠, but it was rapidly increased with an increase of the neutron irradiation above 10 n/㎠. It may be considered that the increase of hardness is due to the hindrance of dislocation motion induced defect clusters by irradiation. On the other hand, the MAE energy was slowly decreased as the neutron irradiation increased up to 10 n/㎠ and it was rapidly decreased with an increase of the neutron irradiation increased up to 10 n/㎠ and it was rapidly decreased with an increase of the neutron irradiation above 10 n/㎠. The decrease of the MAE energy may be considered as an increase of the defect clusters which is very sensitive to the 90°domain wall motion. Furthermore, the change of MAe energy and hardness had nearly a linear relationship, but the change of MAE energy was more significant than the change of the hardness. Therefore, MAe may be considered as a very useful technique for the nondestructive evaluation of irradiation damage.

약국서비스 만족에 영향을 미치는 요인 분석 : 환자체감시간과 실 조제시간 비교를 중심으로

박성희,서준규,윤혜설,홍진영,박군제 한국의료QA학회 1998 한국의료질향상학회지 Vol.5 No.2

Purpose : To shorten processing time for variety of medical affairs of the patient at the outpatient clinic of a big hospital is very important to qualify medical care of the patient. Therefore, patient's waiting time for drug delivery after doctor's prescription is often utilized as a strong tool to evaluate patient satisfaction with a medical care provided. We performed this study to investigate factors influencing patient satisfaction related with waiting time for drug delivery. Methods : The data were collected from July 21 to August 12, 1998. A total 535 patients or their families who visited outpatient clinics of Inha University Hospital were subjected to evaluate the drug delivery time and the level of their satisfaction related, which were compared with those objectively evaluated by Quality Improvement Team. The reliability of the scale was tested with Cronbach's alpha, and the data were analyzed using frequency, t-test, ANOVA, correlation analysis and multiple regression. Results : The mean drug delivery time subjectively evaluated by the patient (16.1 13.0 min) was longer than that objectively evaluated (10.9 7.6 min) by 5.2 min. Drug delivery time objectively evaluated was influenced by the prescription contents, total amount or type of drug dispensed, etc, as expected. The time discrepancy between two evaluations was influenced by several causative factors. One of those proved to be a patient's late response to the information from the pharmacy which the drug is ready to deliver. Interestingly, this discrepancy was found to be more prominent especially when waiting place for drug delivery was not less crowded. Other factors, pharmaceutical counseling at the pharmacy, emotional status or behavior of a patient while he waits for the medicine, were also found to influence the time subjectively evaluated. Regarding the degree of patient satisfaction with the drug delivery, majority of patients accepted drug delivery time with less than 10 min. It was also found to be influenced by emotional status of the patient as well as kindness or activity of pharmaceutical counselor. Conclusion : The results show that, besides prescription contents, behavior pattern or emotional status of a patient, environment of the waiting place, and quality of pharmaceutical counseling at the pharmacy, may influence the patient's subjective evaluation of waiting time for drug delivery and his satisfaction related with the service in the big hospital. In order to improve patient satisfaction related with waiting time for drug delivery, it will be cost effective to qualify pharmaceutical counseling and information system at the drug delivery site or waiting place rather than to shorten the real processing time within the pharmacy.