Corrosion Behavior of Inconel X-750 for Carbon Anode Oxide Reduction Application

Jeon, Min Ku,Kim, Sung-Wook,Lee, Sang-Kwon,Choi, Eun-Young Korean Radioactive Waste Society 2020 방사성폐기물학회지 Vol.18 No.3

The corrosion behavior of the Inconel X-750 alloy was investigated for its potential application under a Cl₂-O₂ mixed gas flow in an Ar atmosphere. The corrosion rate was found to be negligible at temperatures up to 400℃ under a flow rate of 30 mL·min^-1 Cl₂ + 170 mL·min^-1 Ar, whereas an exponential increase was observed in the corrosion rate at temperatures greater than 500℃. The suppression of the corrosion reaction due to the presence of O₂ was verified experimentally at flow rates of 30 mL·min^-1 Cl₂ (4.96 g·m^-2·h^-1), 20 mL·min^-1 Cl₂ + 10 mL·min^-1 O₂ (2.02 g·m^-2 ·h^-1), and 10 mL·min^-1 Cl₂ + 20 mL·min^-1 O₂ (1.34 g·m^-2·h^-1) under a constant Ar flow rate of 170 mL·min^-1 at 600℃ for 8 h. The surface morphology analysis results revealed that porous surfaces with tunnel-type holes were produced under the Cl₂-O₂ mixed-gas condition. Furthermore, the effects of the Cl₂ flow rate on the corrosion rate were investigated, indicating that its impact was negligible within the range of 5-30 mL·min^-1 Cl₂ at 600℃.

동맥혈 채혈후 시간 경과 및 온도 변화가 가스분압 및 PH 에 미치는 영향에 관한 연구

김동수,이승환,김건식,강화자,신광일,여민구 대한마취과학회 1989 Korean Journal of Anesthesiology Vol.22 No.6

Blood gas samples are highly susceptible to preanalytic error due to improper methods of obtaining or handling the sample prior to delivery to the laboratory. The errors in the measurement of blood gas analysis are currently derived from the exposure of sample to atmosphere, effects of anticoagulant itself, temperature difference between the measuring electrode and drawn blood and the delay in running the sample. To study the effects of the delay in measuring the sample and the temperature difference between the measuring electrode and drawn blood on values of blood gases and pH, we analyzed the arterial sampling from the 24 patients who were taking elective surgery or on his/her recovery period with indwelling arterial catheter. The plastic sampling syringes were kept at 4。C (refrigerator) or 22。-24。C (room temperature) and analyzed at regular intervals (1, 10, 30, 60,120 min) for 120 minutes. The following results were obtained: 1) When the arterial blood drawn from the anesthetized patients were stored 4。C, partial pressure of oxygen (PaO₂) decreased significantly after 20 min, whereas those stored at room temperature decreased significantly after 10 min. 2) When the arterial blood drawn from the recovery patients were stored at 4。C, PaO₂ did not decrease significantly through the experimental period of 120 min. Although those stored at room temperature did not decrease significantly through the period of 120 min. 3) Partial pressure of carbon dioxide in the arterial blood (PaCO₂,) drawn from the anesthetized patients increased significantly by 120 min. at 4。C, whereas those at room temperature increased significantly after 20 min. 4) PaCO₂, of the recovery patients increased signigicantly by 120 min. at 4。C, whereas those at room temperature increased significantly after 30 min. 5) pH of the arterial blood drawn from either anesthetized or recovery patients decreased significantly by 120 min. at 4。C, whereas those at room temperature decreased significantly after 60 min. 6) No significant changes al oxygen saturation (SaO₂) and content (CaO₂) were noted in either anesthetized or recovery. patients in accordance with time elapsed at 4。C or room temperature. In summary, as the changes of PO₂ in particular higher than physiologic PO₂ and PCO₂ in the arterial blood stored at room temperature are significant in accordance with the delay in measuring, it would be advisable to analyze the sample in a short period of time or to store it in a cool place when the measuring will be delayed.

Effect of Jaeumkanghwatang (JEKHT), a Polyherbal Formula on the Pharmacokinetics Profiles of Tamoxifen in Male SD Rats (1)

Min A Kwak,Soo Jin Park,Sung Hwan Park,Young Joon Lee,Sae Kwang Ku 대한한의학회 2016 대한한의학회지 Vol.37 No.2

Effect of Jaeumkanghwatang (JEKHT), a Polyherbal Formula on the Pharmacokinetics Profiles of Tamoxifen in Male SD Rats (1) - Single Oral Combination Treatment of Tamoxifen 50 mg/kg with JEKHT 100 mg/kg within 5 min -

Kwak, Min A,Park, Soo Jin,Park, Sung Hwan,Lee, Young Joon,Ku, Sae Kwang The Society of Korean Medicine 2016 대한한의학회지 Vol.37 No.2

Objectives: The objective of this study was to elucidate the effect of Jaeumkanghwatang (JEKHT) on the plasma concentration and pharmacokinetics of tamoxifen in combination therapy as a process of the comprehensive and integrative medicine against breast cancer. Methods: After 50 mg/kg of tamoxifen treatment, JEKHT 100 mg/kg was orally administered within 5 min. The plasma were collected at 30 min before administration, 30min, 1, 2, 3, 4, 6, 8 and 24 hrs after end of JEKHT treatment, and plasma concentrations of tamoxifen were analyzed using LC-MS/MS methods. PK parameters of tamoxifen ($T_{max}$, $C_{max}$, AUC, $t_{1/2}$ and $MRT_{inf}$) were analysis as compared with tamoxifen single administered rats. Results: JEKHT did not influenced on the plasma concentrations and pharmacokinetics of tamoxifen after single oral co-administration, within 5min except for some negligible effects on plasma concentration. The $T_{max}$, $C_{max}$, AUC, $t_{1/2}$ and $MRT_{inf}$ of tamoxifen in co-administered rats were quite similar to those of tamoxifen single treated rats. Conclusions: Based on the results of the present study, JEKHT did not influenced on the oral bioavailability of tamoxifen, when they were single co-administered within 5min. However, more detail pharmacokinetic studies should be tested to conclude the possibilities that can be used as comprehensive and integrative therapy with JEKHT and tamoxifen for breast cancers, when they were co-administered, like the effects on the pretreatment of JEKHT and after repeat co-administrations.

Effect of Jaeumkanghwatang (JEKHT), a Polyherbal Formula on the Pharmacokinetics Profiles of Tamoxifen in Male SD Rats (2) - Oral Combination Treatment of Tamoxifen 50 mg/kg with JEKHT 100 mg/kg on JEKHT 6-day Repeated Pretreated Rats with 8-day Repeated

Park, Soo Jin,Kwak, Min A,Park, Sung Hwan,Lee, Young Joon,Ku, Sae Kwang Society of Preventive Korean Medicine 2016 대한예방한의학회지 Vol.20 No.2

Objectives : The effects of Jaeumkanghwatang (JEKHT) co-administration on the pharmacokinetics of tamoxifen were observed after oral combination treatment of tamoxifen 50 mg/kg with JEKHT 100 mg/kg on JEKHT 6-day repeated oral pretreated rats with 8-day repeated co-administration to confirm the effects of JEKHT co-administration on the pharmacokinetics of tamoxifen. Methods : Six days after pretreatment of JEKHT 100 mg/kg, tamoxifen 50 mg/kg was co-administered with JEKHT 100 mg/kg, once a day for 8 days within 5 min. The blood were collected at 30 min before administration, 30 min, 1, 2, 3, 4, 6, 8 and 24 hrs after end of first and last 8th tamoxifen treatment, and plasma concentrations of tamoxifen were analyzed using LC-MS/MS methods. PK parameters of tamoxifen ($T_{max}$, $C_{max}$, AUC, $t_{1/2}$ and $MRT_{inf}$) were analysis as compared with tamoxifen single administered. Results : Six-day repeated oral pretreatment of JEKHT and 8-day repeated oral co-administration of tamoxifen within 5 min did not influenced on the plasma concentrations and pharmacokinetic parameters of tamoxifen, oral bioavailability, as compared with tamoxifen single treated rats, except for some negligible effects. Conclusions : It is concluded that JEKHT did not influenced on the plasma concentrations and pharmacokinetic parameters, the oral bioavailability of tamoxifen. Therefore, it is considered that co-administration of JEKHT and tamoxifen will be provide an effective novel treatment regimen on the comprehensive and integrative medicine for breast cancer patients, if they showed favorable synergic effects on the pharmacodynamics or reduce the tamoxifen treatment related toxicity and side effects in future studies.

반응표면분석에 의한 노랑느타리버섯 추출물의 추출조건 최적화

이혜진(Hye-Jin Lee),도정룡(Jeong-Ryong Do),정민유(Min-Yu Chung),김현구(Hyun-Ku Kim) 한국식품영양과학회 2014 한국식품영양과학회지 Vol.43 No.10

노랑느타리버섯의 항산화 활성을 측정하여 효율적 추출조건을 예측하기 위해 마이크로웨이브 에너지, 에탄올 농도, 추출시간의 요인변수를 중심합성법에 따라 설정하여 반응표면분석을 통해 최적화 조건을 설정하였다. 노랑느타리버섯 추출물의 수율, 전자공여작용, SOD 유사 활성, 총 폴리페놀 함량에 대한 반응표면의 회귀식 R² 값이 각각 0.91, 0.87, 0.86 및 0.87로 분석되었고, 수율은 P<0.01, 항산화 활성이 P<0.05에서 유의적 수준을 나타냈다. 노랑느타리버섯은 요인변수에 따라 수율, 전자공여작용, 총 폴리페놀 함량의 경우 마이크로웨이브 에너지의 영향을 가장 많이 받았고, SOD유사 활성의 경우 에탄올 농도에 따른 유의적 차이를 보였다. 추출물의 각 특성을 모두 만족시키는 최적의 추출조건의 범위는 superimposing 하여 마이크로웨이브 에너지 71.48~92.84 watts, 에탄올 농도 55.01~71.66%, 추출시간 3~9분으로 예측되었다. Response surface methodology (RSM) was used to optimize extraction conditions of Pleurotus cornocopiae. Coefficients of determination (R²) for dependent variables ranged from 0.86 at 0.91. Maximum extraction yield was 40.81% under the following conditions: microwave power of 60.08 watts, ethanolic concentration of 12.33%, and extraction time of 6.86 min. Maximum extraction electron donating ability was 35.72% at 44.13 watts, 19.30%, and 4.21 min. Maximum extraction superoxide dismutase (SOD)-like activity was 34.87% at 114.01 watts, 65.88%, and 1.56 min. Maximum extraction total polyphenol content was 31.77 mg/g at 50.52 watts, 23.00% and 2.90 min. Based on the superimposition of four dimensional RSM with respect to extraction yield, electron donating ability, SOD-like activity, and total polyphenol content obtained under various extraction conditions, the optimum ranges of extraction conditions were as follows: microwave power of 71.48~92.84 watts, ethanol concentration of 55.01~71.66%, and extraction time of 3~9 min.

An Investigation of the Stability of Y₂O₃ and Sintering Behavior of Fe-Based ODS Particles Prepared by High Energy Ball Milling

Park, Eun-Kwang,Hong, Sung-Mo,Park, Jin-Ju,Lee, Min-Ku,Rhee, Chang-Kyu,Seol, Kyeong-Won The Korean Powder Metallurgy Institute 2013 한국분말재료학회지 (KPMI) Vol.20 No.4

Fe-based oxide dispersion strengthened (ODS) powders were produced by high energy ball milling, followed by spark plasma sintering (SPS) for consolidation. The mixed powders of 84Fe-14Cr-$2Y_2O_3$ (wt%) were mechanically milled for 10 and 90 mins, and then consolidated at different temperatures ($900{\sim}1100^{\circ}C$). Mechanically-Alloyed (MAed) particles were examined by means of cross-sectional images using scanning electron microscopy (SEM). Both mechanical alloying and sintering behavior was investigated by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM). To confirm the thermal behavior of $Y_2O_3$, a replica method was applied after the SPS process. From the SEM observation, MAed powders milled for 10 min showed a lamella structure consisting of rich regions of Fe and Cr, while both regions were fully alloyed after 90 min. The results of sintering behavior clearly indicate that as the SPS temperature increased, micro-sized defects decreased and the density of consolidated ODS alloys increased. TEM images revealed that precipitates smaller than 50 nm consisted of $YCrO_3$.

서울의 PPNG 발생 빈도(1991-1992)

김재홍,윤기범,박평원,김영진,전경민,김영태,김중환,곽호,구상완,송민석,유옥,지혜구,김동원,문상은,박영립,정승호,성범진,성순제,엄주용,황정열,이기홍,이주협,전태진 대한화학요법학회 1994 대한화학요법학회지 Vol.12 No.1

The prevalence of PPNG among pretreated gonorrhea cases isolated at the STD clinic of Choong-Ku Public Health Center in Seoul has been studied and reported annually since 1981. In 1991, 123 strains of N.gonorrhoeae were isolated, among which 58(47.1%) were PPNG. In 1992, 98 starains of N.gonorrhoeae were isolated, among which 51(52.0%) were PPNG. In all, 109(49.3%) strains were found to be PPNG among 221 strains isolated between 1991-1992. The prevalence of PPNG in Seoul showed increased tendency till 1989, thereafter, it has been stationary or slightly decreasing.

자바리, Epinephelus bruneus의 난 발생과 부화에 미치는 수온의 영향

양문호,최영웅,정민민,구학동,오봉세,문태석,이창훈,김경민,한석중,Yang, Moon-Ho,Choi, Young-Ung,Jung, Min-Min,Ku, Hag-Dong,Oh, Bong-Sae,Moon, Tae-Seok,Lee, Chang-Hoon,Kim, Kyong-Min,Han, Seock-Jung 한국발생생물학회 2007 발생과 생식 Vol.11 No.2

This study examined temperature effect in egg development and hatching of longtooth grouper, Epinephelus bruneus. Fertilized embryos was not growth after morula stage at $15^{\circ}C$, at 18, 21, 24 and $27^{\circ}C$, the required time from fertilized embryos to hatching were 70 h. 30 min., 44 h. 10 min., 29 h. 10 min. and 24 h. 30 min., respectively. The hatching rates at $24^{\circ}C$ were higher than the other conditions and the hatching was not occurred at $15^{\circ}C$. These results suggest that the water temperature range of egg development and hatching was $18{\sim}27^{\circ}C$. 이 연구는 실내 사육수조에서 자연산란 후 수정된 난을 대상으로 수온에 따른 난 발생속도와 부화율을 조사하였다. 부화에 이르기까지 각 수온조건에서 소요된 시간은 $15^{\circ}C$에서 상실기 이후 발생이 진행되지 않았고, 18, 21, 24, $27^{\circ}C$에서 각각 70시간 30분, 44시간 10분, 29시간 10분 그리고 24시간 30분이 소요되었다. 부화율은 $15^{\circ}C$에서 0%였고, 18, 21, 24 그리고 $27^{\circ}C$에서 각각 $8.3{\pm}1.2%$, $18.0{\pm}6.2%$, $24.0{\pm}4.0%$ 그리고 $17.0{\pm}7.2%$로 뚜렷한 차이 없이 $24^{\circ}C$에서 다소 높았고 21와 $27^{\circ}C$에서 비슷한 경향이었으며 $18^{\circ}C$에서 가장 낮게 나타났다. 이러한 결과에서 자바리의 난발생 수온범위는 $18{\sim}27^{\circ}C$로 제안된다.

밀링 에너지 변화에 따른 TiC 분말의 미세화 거동에 관한 정량적 연구

홍성모,박은광,김경열,박진주,이민구,이창규,이진규,권영순,Hong, Sung-Mo,Park, Eun-Kwang,Kim, Kyeong-Yeol,Park, Jin-Ju,Lee, Min-Ku,Rhee, Chang-Kyu,Lee, Jin-Kyu,Kwon, Young-Soon 한국분말야금학회 2012 한국분말재료학회지 (KPMI) Vol.19 No.1

This study investigated refinement behaviors of TiC powders produced under different impact energy conditions using a mechanical milling process. The initial coarse TiC powders with an average diameter of 9.3 ${\mu}m$ were milled for 5, 20, 60 and 120 mins through the conventional low energy mechanical milling (LEMM, 22G) and specially designed high energy mechanical milling (HEMM, 65G). TiC powders with angular shape became spherical one and their sizes decreased as the milling time increased, irrespective of milling energy. Based upon the FE-SEM and BET results of milled powders, it was found initial coarse TiC powders readily became much finer near 100 nm within 60 min under HEMM, while their sizes were over 200 nm under LEMM, despite the long milling time of up to 120 min. Particularly, ultra-fine TiC powders with an average diameter of 77 nm were fabricated within 60 min in the presence of toluene under HEMM.