한의진단명과 진단요건의 표준화 연구 II (표준화 실례) : 2차년도 연구결과 중간 보고

양기상,최선미,최승훈,안규석,박경모,박종현,김성우,신승호,정우열,전병훈,고현,김정범,신상우,김성훈,김동희,권영규,엄현섭,장혜옥 한국한의학연구원 1996 한국한의학연구원논문집 Vol.2 No.1

The diagnostic requirements were suggested and explained regarding the systems of differentiation of symptoms and signs in the second year study of standardization and unification of the terms and conditions used for diagnosis in oriental medicine. The systems were as follows; - differential diagnosis according to condition of body fluid, differentiation of syndromes according to the state of qi and blood, differential diagnosis according to relative excessiveness or deficiency of yin and yang(氣血陰陽津液辨證) - differentiation of diseases according to pathological changes of the viscera and their interrelation - analyzing and differentiating of febrile diseases in accordance with the theory of the six channels(傷寒辨證) The individual diagnosis pattern was arranged by the diagnostic requirements in the following order : another name(異名), notion of diagnosis pattern, index of differentiation of symptoms and signs(辨證指標), the main point of diagnosis, analysis of diagnosis pattern(證候分析), discrimination of diagnosis pattern(證候鑑別), a way of curing a diseases(治法), prescription(處方), herb in common use(常用藥物), diseases appearing the diagnosis pattern(常見疾病), documents(文獻調査). This study was carried out on the basis of the Chinese documents and references.

흉막삼출의 유무에 따른 쯔쯔가무시증 환자간의 비교

권세훈,김형호,강지인,하재하,한경택,이재록,김동민,권용은,윤성호,이승일 朝鮮大學校 附設 醫學硏究所 2007 The Medical Journal of Chosun University Vol.32 No.1

Scrub typhus is a potentially fatal infectious disease caused by the organism Orientia tsutsugamushi. Clinical manifestations are fever, skin rash, eschar and varying degree of respiratory distress. The pleural effusion in scrub typhus is rare and secondary to the destruction of vascular endothelium. Because the respiratory symptoms are generally mild and the pleural effusion in scmb typhus is rare than in interstitial pneumonia, there are few comments about the characteristics of scmb typhus with pleural effusion. So we made the comparative study of scmb typhus patients between with pleural effusion and without pleural effusion. 연구배경 치명적일 수 있는 감염질환 중 하나인 쯔쯔가무시중(Scrub typhus)에서 드문 흉막삼출을 동반한 환자에 대한 고찰은 다른 문헌에서도 자주 언급되지 않았다. 따라서 본 저자들은 흉막삼출이 있는 경우와 없는 경우에 따른 쯔쯔가무시중 환자들을 비교하고자 하였다. 방법 2003년에서 2006년까지 조선대학교 병원 내과에 입원중인 환자 중 쯔쯔가무시중 진단을 받은 총 109명의 환자를 대상으로 하여 흉부 X선 검사 및 혈청학적 검사(CPK, LDH, ESR, CRP, AST, ALT, ADA), 혈액학적 검사(WBC, PLT) 및 백분율 검사등을 실시하였다. 결과 흉막삼출이 있는 환자들의 경우 흉막 삼출이 없는 환자들에 비해 ESR 수치가 통계학적으로 의의있게 높았다(p-vaule < 0.05). 결론 흉막삼출 유무에 따른 쯔쯔가무시중 환자간의 비교에 있어 ESR 수치가 통계학적인 의의를 가졌다.

허혈성 심질환에서 나타나는 황상화지수, 사이토카인 및 염증지표의 변화

전상훈,안지훈,방덕원,온영근,현민수,김성구,권영주 순천향대학교 의학연구소 2004 Journal of Soonchunhyang Medical Science Vol.10 No.3

..

역행적 골수정 삽입술을 이용한 대퇴골 과상부 골절의 치료

권진우,신승호,조원호,성기호,김기환,손경태,이상훈,박세원,배종문,권태우 대한골절학회 2003 대한골절학회지 Vol.16 No.4

연 X-선 현미경을 이용한 금 나노입자 세포영상

권영만,김한경,김경우,김선희,윤홍화,천권수,강성훈,박성훈,정선관,윤권하 韓國電子顯微鏡學會 2008 Applied microscopy Vol.38 No.3

연 x-선 현미경은 ‘물의 창’ 영역(2.3~4.4 nm)의 파장을 이용하여, 수십 nm의 분해능으로 세포를 파괴하지 않고 살아있는 상태에서 세포의 내부구조를 관찰할 수 있어 가시광선현미경과 전자현미경을 단점을 보완하는 특징을 갖는 세포 생물학 연구에 적합한 현미경이다. 그러나 기존 연 x-선 현미경은 광원으로 방사선 가속기를 이용하기 때문에 사용이 제한적이었다. 이에, 본 연구에서는 2.88 nm의 연 x-선을 광원으로 사용하는 소형 연 x-선 현미경을 이용하여, 내포작용에 의해 금 나노입자를 포획한 HT1080과 MDA-MB 231 세포의 영상을 약 60 nm 분해능으로 획득하였다. 금 나노입자의 세포에 대한 독성을 제거하기 위하여 폴리에틸렌 글리콜을 캡핑하였고, 2.88 nm 파장의 연 x-선에 대하여 충분한 조영효과로 인하여 세포영상에서 뚜렷한 대조도를 나타내었다. 내포작용에 의해 액포에 포함되어 있는 다양한 크기의 금 나노입자 군집을 확인하였으며, 세포내부의 액포의 분포상태도 관찰할 수 있었다. 따라서 고분해능을 가진 소형 연 x-선 현미경을 이용하여 금 나노입자를 세포내의 미세기관이나 특정 단백질에 표지하면 연 x-선에 대한 조영효과의 증가에 의하여 더욱 유용한 정보를 획득할 수 있을 것으로 생각한다. A compact soft x-ray microscope operated in the ‘water window’ wavelength region (2.3~4.4 nm) was used for observing cells with nano-scale spatial resolution. To obtain cellular imaging captured with colloidal gold nanoparticles using a compact soft x-ray microscope. The colloidal gold nanoparticles showed higher contrast and lower transmission more than 7 times than that of cellular protein on the soft x-ray wavelength region. The structure and thickness of the cell membrane of the Coscinodiscus oculoides (diatome) and red blood cells were seen clearly. The gold nanoparticles within the HT1080 and MDA-MB 231 cells were seen clearly on the soft x-ray microscopy. The gold nanoparticles were aggregated within vesicles by endocytosis.

공정설계를 위한 객체지향 데이터 모델링

권성훈,이경휘 대전대학교 산업기술연구소 1999 산업기술연구소 論文集 Vol.10 No.2

Process Planning may be defined as the systematic determination of the methods by which a product is to be manufactured economically and competitively. In it's generic nature, process planning is a non-standardized decision process based on intensive data, knowledge, and heterogeneous functions such as process selection, process sequencing, machine selection, and tool selection etc. How to semantically build data and knowledge bases about features, machine, tools, cutting parameter is a key problem in developing data models that support the entire semantics about manufacturing features, processes, machines, tools, etc. for process planning. Object oriented data models have a modeling power of rich semantics on a real world. In this paper, an object oriented data model for process planning is proposed on hole feature machining. The proposed data model includes submodels of feature, processes, machines, tools, cutting parameters, and a relation model among them, the data model may be used for performing process selection, machine selection, tool selection, and cutting parameter determination. In DB implementation, the object oriented data model is transformed into a relational data base(Sybase) which is prevalent in the related market. An illustrative example is given for validating the proposed data model and DB implementation.

Geotextile Filter의 특수성능 분석

權武南,李相昊,金勝勳 慶北大學校 1992 論文集 Vol.52 No.-

In order to lock stability of geotextile filer to clogging or blocking, small scale laboratory tests were accomplished, considering to drainage conditions, on domestic and foreign nonwoven geotextile products used for filter, and permeable capacity of the geotextile filter was analyzed. The results obtained are as follows: 1. The permeable flow rate through the geotextile filter appears to be decrease remarkably in the initial stage of duration time but gradually afterward and is stabilized at 300 hours∼400 hours of duration time. 2. The increase ratio of permeable flow rate through the geotextile filter due to rising hydraulic head appears to be higher with protected soil having lower comparative content of fine particles, and the effect of rising hydraulic head finds to be higher with that protected soil. 3. The permeable flow rate through the geotextile filter appears to be higher with protected soil having lower content of fine particles and the increase of it trends to be considerable and to be decrease according to the elapse of time. From the fact, the flow rate finds to be more influenced by clogging or blocking with protected soil layer having lower content of fine particles. 4. It seems generally that the thicker the geotextile filter is, the higher the permeable flow rate is, but the decrease ratio of it in the initial stage finds to be lower in the case of thicker geotextile.

구치의 경사도와 회전정도가 발치공간 폐쇄시 치근막의 응력분포와 치아의 초기이동에 미치는 영향에 대한 3차원 유한요소법적 연구 : Three dimensional finite elements study

권대우,손우성,양훈철 대한치과교정학회 2004 대한치과교정학회지 Vol.34 No.5

본 연구는 상악 제1대구치에 발치공간 폐쇄를 위한 근심력 적용시, 대구치의 근원심 경사도와 회전정도의 변화가 치근막의 응력분포와 치근막 내에서의 초기 치아이동에 어떤 변화를 야기하는지를 살펴보기 위하여 시행되었다. 상악 제1대구치와 치근막의 3차원 유한요소모델을 제작하여 20˚의 근심경사와 원심경사를 설정하고. 20˚의 근심회전과 원심회전을 설정하였다. 각각의 상황에서 치체이동을 유도하는 근심력을 가하기 위해 협면에 rigid element를 부착하고 200g의 근심력과 9:1의 countertipping 모멘트. 5:1의 counterrotation 모멘트를 부여하였다. 각각의 응력분포 및 초기이동 양상을 비교하여 다음과 같은 결론을 얻었다. 상악 제1대구치의 경사도 변화나 회전 변화를 통해 근심력 적용시 구치의 근심이동에 대한 저항의 증가를 얻을 수 없었다. 20˚의 근심경사와 20˚의 원심회전이 매우 유사한 응력분포 및 변위를 나타내었다. 20˚의 원심경사와 20˚의 근심회전도 마찬가지로 유사성을 보였다. 20˚ 근심경사 및 20˚ 원심회전된 경우 치근이 협측 아동하고 치관이 설측 이동하는 관상면 상에서의 회전경향이 발생하였다. 20˚ 원심경사 및 20˚ 근심회전된 경우 치근이 설측 이동하고, 치관이 협측 이동하는 관상면 상에서의 회전경향이 발생하였다. 경사되거나 회전된 치아에 근심력을 가해야 할 경우, 관상면상에서의 회전을 방지하기 위한 부가적인 토크 조절이 필요하다. The purpose of this study was to evaluate the stress distributions at the periodontal ligament (PDL) and displacements of the maxillary first molar when mesially directed force was applied under various molar angulations and rotations. A three dimensional finite element model of the maxillary first molar and its periodontal ligament was made. Upright position, mesially angulated position by 20˚ and distally angulated position of the same degree were simulated to investigate the effect of molar angulation. An anteriorly directed force of 200g, countertipping moment of 1,800gm-mm (9:1 moment/force ratio) and counterrotation moment of 1,000gm-mm (5:1 moment/force ratio) were applied In each situation. To evaluate the effect of molar rotation on the stress distribution, mesial-in rotation by 20˚ and the same amount of distal-in rotation were simulated. The same force and moments were applied in each situation. The results were as follows: In all situations, there was no significant difference in mesially directed tooth displacement. Also, any differences in stress distributions could not be found, in other words, there were no different mesial movements. Stress distributions and tooth displacement of the 20˚ mesially angulated situation were very similar with those of the 20° distal-in rotated situation. The same phenomenon was obserned between the 20° distally angulated situation and 20˚ mesial-In rotated situation. When the tooth was mesially angulated, or distal-in rotated, mesially directed force made the tooth rotate In the coronal plane, with its roots moving buccally, and Its crown moving lingually. When the tooth was distally angulated, or mesial-in rotated, mesially directed force made the tooth rotate in the coronal plane, with its roots moving lingually, and its crown moving buccally. When force Is applied to an angulated or rotated molar, the orthodontist should understand that additional torque control is needed to prevent unwanted tooth rotation in the coronal plane.

한국인 관상동맥의 변화양상에 대한 형태학적 연구

권태정,이상용,이한영,고영창,권기석,조재홍,김태공,김유훈,조갑래,서중석,이원태 內務部 國立科學搜査硏究所 2001 國立 科學 搜査 硏究所 年報 Vol.33 No.-

Vermicomposting에 의한 유기성 슬러지와 음식물쓰레기의 병합처리

권영택,윤지훈,이상희 경남대학교 환경문제연구소 2000 환경연구 Vol.23 No.-

Generating rate of food waste in Korea is relatively high as 11,793ton/day corresponding 26.5% of municipal solid waste(USA 25%, England 19% and Germany 28%). Food waste is now separated from other solid wastes by solid waste management law and efforts of NGO. Thus, there is a need to develop effective and efficient technologies of food waste treatment. In this study, vermicomposting was applied to food waste mixed with sludges from a pulp and paper industry. Lumbricus rubellus grew and reproduced favorably in mixtures of organic sludge containing up to 70% of food waste. The casting was rich in nitrogen and phosphorus with 19.9 ~ 20.6 of C/N ratio.