Precision-TPA를 이용한 구치부 회전시 근심 및 원심삽입법에 따른 동적인 치아이동 양상에 관한 실험 연구

양성재,정성권,노준,전윤식 대한치과교정학회 1999 대한치과교정학회지 Vol.29 No.4

회전된 구치를 개선시키기 위해 사용하는 precision-TPA(transpalatal arch)를 삽입방법들-근심삽입법, 원심삽입법, 확장력을 부여한 근심삽입법 (이하 근심확장법) -에 따라 동적인 치아이동의 양상과 치열궁의 변화를 비교하기 위해 본교실에서 개발, 제작한 Calorific machine을 이용하여 실험한 후 회전된 치아와 고정치간의 이동양상을 계측하여 통계처리한 결과 다음과 같은 결론을 얻었다. 1. 구치간 폭경은 근심삽입법에 의해 감소하였고, 원심삽입법과 근심확장법에 의해서는 증가하였다. 2. 원심삽입법에 의해서 치열궁 장경이 가장 증가하였고, 근심확장법, 근심삽입법순으로 증가하였다. 3. 근심삽입법의 회전중심은 근심소와(mesial pit)와 중심소와(central pit)사이에위치하였고, 원심삽입법에서는 원심소와(distal pit)와 원심설측교두 (distolingual cusp)사이에, 근심확장법은 원심소와(distal pit)에 위치하였다. Dr. Youn-Sic Chun and coworkers invented the new machine for getting information about the relative effectiveness of the orthodontic appliances and we named it Calorific machine. The author and colleagues used this machine to compare with tooth moving mechanism by 3 types of the insertion method of precision-TPA for derotating the posterior teeth. We measured the distance of tooth movement and found out the rotational center on the occlusal X-ray film and the tooth movement on the occlusogram and then processed paired t-test by SAS program. The results were as follows : 1. In the intermolar width, the mesial insertion method showed the loss of distance, and the other methods (-distal insertion method, mesial expansion method-) showed the increase of distance. 2. In the arch length, the distal insertion method was exhibited as most recommandable way for increasing the arch length. 3. The rotation center of the mesial insertion method for derotating the molar, was located between mesial pit and central pit of the lower 2nd molar. And, in the distal insertion method, it was located between distal pit and distolingual cusp. and in the mesial expansion method was located at distal pit.

Metal separator의 자력개선과 자동차 연구

서성규,황원준,양병곤 여수대학교 산업기술지역개발연구소 2001 産業基術硏究所 論文集 Vol.10 No.-

The metal separators which are used at chemical plants and/or plastic powder manufacturing plants are to improve the productivity and reduce the inferiority of the materials and protect the machines so as to prevent the malfunction of the machines. The metal separators are divided according to the collecting methods as permanent magnet, electro magnet, supersonic waves and each method has advantages and disadvantages. The extensively spread metal separator is magnet type which has relatively low collecting ratio to 91%, but the facility cost is cheap and almost no annual operation cost with long average life span. The magnetic force intensity of the magnet bar surface can improve the efficiency of alien substance remove. The extensively used current permanent magnet type has the maximum 4000 gauss of surface magnetic force intensity. Recently a local company developed a maximum 8500 gauss of surface magnetic force intensity and supply to the local market with equal capacity to the imported one. But, the alien substance collected on the permanent magnet bar may be removed manually and it is required of magnetic force improvement and automation for process and economical efficiency. Therefore, the object of this research is to develop the magnetic force improved magnetic bar and automatic device for the collected alien substance removal, so improve the collecting ratio and the efficiency of the production process. We tested the optimized conditions by measuring the magnetic force of the permanent magnet bar according to the magnet location and size. As a result of this research, we developed a magnet bar with surface magnetic force intensity with maximum 8500 gauss. Also, we tried to check the possibility of the automation by testing of surface resin coating method for automation device development, researching the collecting capacity of alien substance and designing the stabilization of machine process structure.

기체온도 변화에 따른 질소레이저의 출력특성

김성훈,양준묵,추한태,이치원 충남대학교 자연과학연구소 1993 忠南科學硏究誌 Vol.20 No.2

While the temperature of the gas was being changed by modifying the value of E/P which being effects the output characteristics of gas laser into a temperature function, the optimum value of E/P was calculated, being applied to Nitrogen laser and was compared with experimental values. The optimum operational characteristics by the variation of the nitrogen gas temperature is observed at 30 ℃ in gas temperature and 120 torr in gas pressure. Also the value of E/P is evaluated to be 423 V ㎝^-1torr^-1 which is 2.2 times as large as that of theoretical value. According to increasing the nitrogen gas temperature, the nitrogen gas pressure for the laser action is to be broaded. However in this case, the maximum output power is slightly decrease.

열공형과 비열공형 피질하 혈관성 치매에서 위험인자의 차이에 관한 비교 연구

배희준,정지향,유경호,나덕렬,김상윤,최경규,양동원,손의주,이상도,김재우,박경원,김응규,이재홍,박미영,한일우,함동석,최문성,하충건,최성혜,이애영,이병철,한설희 대한치매학회 2003 Dementia and Neurocognitive Disorders Vol.2 No.2

Backgrounds and Objectives: Vascular dementia is a group of dementing disoders arising from various stroke syndrome. Among these. subcortical ischemic vascular dementia (SIVD) is regarded as a relatively distinct clinical entity. However, MRI patterns of SIVD are not homogenous. In some patients, lacunes are dominant, and in others, subcortical white matter changes are. This study was designed to compare risk factor profiles between SIVD with and without multiple lacunes. Methods: We divided 47 subjects (22 males, mean age. 68 years) recruited from VADAPET (Multicenter Trial For Evaluation Of The Changes In the PET Images Of Subcortical Vascular Dementia Patient) study into two groups one with more than 5 lacunes in deep gray matter (lacune group) and the other with 5 or less(non-lacune group) Clinical characteristics and laboratory findings of two groups were compared. Results: Nineteen of 47 patients (40%) belonged to the lacune group. The lacune and non-lacune groups d d not differ in the following variables: age, hypertension, diabetes mellitus, hyperlipidemia heart disease, history of stroke or TIA, history of trauma or major surgery, family history of hypertension stroke, or dementia, age at diagnosis of dementia, body mass index, white blood cell count, ESR, CRP, fibrinogen, hemoglobin A1C, total cholesterol. LDL cholesterol creatinine, proteinuria, glucosuria, and microhematuria. However, male sex, smoking alcohol. hemoglobin, and HDL cholesterol were possibly associated more with lacune group SIVD than with non-lacune group (p<0 1) Multivariate analyses revealed that smoking, hemoglobin, and HDL cholesterol were independent predictors of SIVD with multiple lacunes Conclusion: Our study suggests that SIVD with multiple lacunes may be significantly different in smoking habits hemoglobin, and HDL cholesterol from SIVD without multiple lacunes.

화학 용액 증착 공정으로 제조된 후막 Pb(Zr_(0.52), Ti_(0.48))O₃의 e_(31,f) 특성

박준식,양성준,강성군,나경환 대한금속재료학회 2003 대한금속·재료학회지 Vol.41 No.9

Thick Pb(Zr_(0.52), Ti_(0.48))O₃(briefly, PZT) films are required for the cases of micro actuators and sensors with high driving force, high breakdown voltage and high sensitivity, and so on. In this work, thick PZT films were fabricated by chemical solution deposition process. Total 16 types of samples using thick PZT films with thicknesses, about 1 ㎛ and 2 ㎛, and Pt top electrodes shapes for measuring effective transverse piezoelectric coefficients (e_(31,f)) were prepared using MEMS processes. All samples were characterized by fabricated e_(31,f) measurement system before and after poling process at 125 kV/cm and 150℃ for 10 min. |e_(31,f)| values of samples after poling were higher than samples before poling. Those of 2 ㎛ thick PZT films were also higher than 1 ㎛ thick PZT films. We found that |e_(31,f)| was directly related with {111} to {h00} crystal structures of thick PZT films. And those with narrow electrodes (x₁- x_(0)) as top Pt electrodes were also higher than cases with wide top Pt electrodes in agreement with given equation.

과전류 보호계전기용 광섬유 전류센서

송민호,양창순,안성준,박병석,이병호 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.5

과전류 보호계전기에 사용할 목적으로 광섬유를 센서헤드로 사용하는 광 전류센서를 구성하였다. 전류측정의 원리는 도체 주변에 감겨진 광섬유 코일을 따라 광신호의 선형편광축이 자기장에 의하여 회전하는 정도를 측정하여 이로부터 전류의 값을 산출하는 편광측정 방법이 사용되었다. 센서코일은 10/125 mm 규격의 일반 통신용 광섬유를 미터당 20회전 이상 비틀어 제작하여 온도나진동 등의 환경적 영향을 최소화하였다. 코일의 한쪽 끝은 Faraday Rotator Mirror를 장착한 반사형으로 설계하여 계통을 해체하지 않은 상태에서도 센서의 탈×부착이 가능하고 코일의 회전수에 따라 센서의 민감도 조절이 용이하며 폐회로형 구조이므로 인근 신호원에 의한 간섭을 차단할 수 있다. 편광 빛가르개 등을 이용한 광학 신호처리부를 구성하고 표준 전류원을 이용한 전류측정 실험을 수행한 결과로 이론적인 해석과 동일한 형태의 출력을 얻을 수 있었다. 본 논문에서는 구성한 광 전류센서의 이론적 모델을 기술하고 전류측정 실험의 결과와 이론치에 대하여 비교 분석한다. A robust, accurate, broad-band, alternating current sensor using fiber-optics is being developed as a part of optical over current protection relay system. The sensor uses the Faraday effect in optical fiber and polarimetric measurements to sense electrical current. The current sensing coil consists of a length of twisted optical fiber and Faraday rotator mirror to suppress the linear birefringence effect. Due to its single-ended closed path structure, it can not only be easily installed to the target with great isolation from other fields in the vicinity, but the sensitivity can be increased by using multiple turns. This paper reports on the theoretical backgrounds of the sensor design and the preliminary experimental results.

시설재배 작물의 적정 시비량 결정을 위한 간이 검정법

홍순달,임태준,강성수,양원석 충북대학교 한국과학재단 지정 첨단원예기술개발 연구센터 2002 연구보고서 Vol.6 No.-

토양의 질산태 질소 함량이 67㎎ ㎏-1에서 343 ㎎ ㎏-1의 분포를 갖는 8개 시설재배 토양에서 시비수준을 무비구와 표준시비구로 하여 오이의 생산력을 검정하고 토양 화학성과의 상호관계 및 회귀관계의 평가로부터 질소 적정 시비량 추천모델을 추정하였다. 토양의 질산태 질소 함량과 무비구 오이의 생체중, 비료효과 및 시비효율의 상호관계를 Cate & Nelson 분할법에 의하야 추정한 질소 시비의 상한기준은 280㎎ ㎏-1으로 추정되었다. 토양의 질산태 질소 수준에 따른 표준시비구의 생체중 변화의 관계로부터 토마토 질소 표준시비를 위한 질산태 질소 하한기준은 100㎎ ㎏-1으로 추정되었다. 따라서 상한기준과 하한기준 사이의 질산태 질소 검정에 의한 토마토, 오이, 배추의 질소 시비량 추천모델은 다음과 같이 개발하였다. 질소 표준시비량에 대한 비율 Y=-0.5556X +155.568. 재배기간이 장기간인 오이의 질소 덧거름 시비량 결정방법을 확립하기 위하여 ChlorophyⅡ meter (SPAD502, Minolta)를 활용한 엽록소 검정법을 검토하였다. 평가방법은 NO3-N 함량이 67∼343㎎ ㎏-1인 8개 토양에서 무비구 오이의 생체중과 경시적 엽위별 엽록소 측정치와의 회귀관계로부터 오이의 생산능력과 질소공급능력에 대한 엽록소 측정치의 기준을 추정하였다. 오이 재배기간 동안 엽위별 엽록소 측정치는 정식 후 39일째 13매 잎에서 최대를 보인 후 감소되었으며, 그 이후 오이의 엽록소 측정치는 토양의 질소 공급능력에 따라 현저한 차이를 나타냈다. 정식 후 39일째 13매엽의 엽록소 측정치는 토양의 질산태 질소, 무비구 오이의 생체중 및 질소 흡수량, 시비효율과 유의성 있는 상관관계를 보였다. 그리고 오이 최대 생체중에 대한 부족비율은 13매엽 엽록소 측정치와 유의성 있는 부의 상관을 보였으며 엽록소 최대치에 대한 부족비율과는 곡선적인 정의 상관을 보였다. 따라서 오이 최대 생체중에 대한 부족비율을 덧거름 요구량이라고 가정하면 13매엽의 엽록소 측정치는 덧거름의 사용시기와 기준을 결정할 수 있는 가능성을 보였다. 따라서 시설재배 오이의 밑거름은 질산태 질소의 토양검정에 의하여 결정하고 덧거름은 오이 정식 후 39일째 13매엽의 엽록소 측정으로 결정할 수 있는 종합적인 질소 시비추천 방안을 확립하였다.

파킨슨씨병 환자에 있어서 자가부신수질 이식술

정상섭,박상근,오성훈,김선호,윤도흠,박정수,양우익,최인준,안영수,김경환,박창일,김진수,이현철 대한신경외과학회 1988 Journal of Korean neurosurgical society Vol.17 No.6

Recent experimental studies and clinical cases have suggested that grafting tissue from the adrenal medulla into the brain may alleviate the symptoms of Parkinson's disease. Autologous adrenal medullary grafts into the striatum was performed stereotactically in two patients with Parkinson's disease. Both patients were bedridden preoperatively, but 4 months after the surgery both became ambulatory and one was even capable of returning to his job. Even though the number of cases was small⑵ and the follow-up period was short, this study shows that adrenal medullary transplantation into the striatum may have some beneficial effects in patient with Parkinson's disease. Further experimental and clinical trials are necessary to see whether this procedure will be a recommendable surgical treatment for patients suffering from Parkinson's disease.

생체분해성 안과제형의 안구내흡수정도와 안독성

민병무,김용백,박근성,송규상,양준묵,이성복,조항진,길숙종,김승영,김학용 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

An improved retinal tack can be used to fix the retina in complicated retinal detachment and proliferative vitreoretinopathy. We used the retinal tack made by biodegradable polyglycolic acid, polylactic acid and copolymers. The tacks with polyglycolic acid were placed in the retina the right eyes of 10 rabbits as group 1, with polylactic-polyglycolic acid copolymers as group 2 in each left eyes. We examined the absorption rates and degree of intraocular inflammation at 1 day, 1, 2, 4, and 8 weeks and compared both eyes. The tacks were absorbed with time in both eyes, but more rapid in copolymers. And there was no inflammation in both eyes. Now, this study will be a base on the drug delivery system in intraocular pharmacological and surgical management.

직업적 아크릴아미드 폭로에 의한 다발성 신경병증

정해관,권용욱,어경윤,김병준,양정선,정철,진영우,이미영,강성규 大韓産業醫學會 1998 대한직업환경의학회지 Vol.10 No.3

Authors report a first Korean case of polyneuropathy in an acrylamide producing factory together with an environmental and epidemiologic survey for the ten workers of the same workplace and 46 workers in the production and manufacturing acrylamide in Ulsan, Korea. The case is 30 years old man who worked in the production of the acrylamide for two years. In August, 1997, he had a weakness of the lower extremity with loss of body weight of 15 Kg which progressed to paresthesia of the limbs, the loss of vibration sense, difficulty in walking, speech disturbance, dysuria, constipation, difficulty in erection and swallowing difficulty. Neurologic examination showed a complete loss of vibration and position sense, and loss of deep tendon reflex in all the limbs. There was a contact dermatitis-like skin lesion on the feet. Electrodiagnostic test showed a generalized polyneuropathy of moderate degree involving motor and sensory component of peripheral and cranial nerves. After 8 months' cessation from exposure and supportive care, his symptoms were completely resolved, but abnormality in electrodiagnostic test and vibrotactile perception threshold still persisted, although much improved than before. There were 11 workers in the same workplace of the case, producing acrylamide by microorganism as a catalyst. Environmental monitoring of the workplace revealed air borne concentration of the acrylamide to be from 0.05 to 0.23 mg/m3 by personal sampling and from 7.65 to 11.65 mg/m3 by area sampling during filter exchanging process, which far exceeds TLV-TWA of 0.03 mg/m3. However, acrylamide was not detected from the plasma of the workers. Symptom questionnaire showed a markedly higher complain of neurologic symptoms, compared to the workers of the other acrylamide producing companies. Electrodiagnostic test showed a several workers are in the lower normal range without definite abnormality. Vibrotactile perception threshold by Vibratron Ⅱ showed a significantly increased threshold in the workers of the same workplace compared to the other acrylamide workers and significantly decreased test score of color vision compared to normal controls. After improvement of the production process and strict wearing of the protective device, most workers reported the improvement of clinical symptoms, but vibrotactile perception threshold was not improved. These result suggests the need for the effective environmental monitoring together with a periodic biological monitoring. Development of effective screening test is urgently needed to control and assess the skin absorption of acrylamide.