Light-extraction efficiency control in AlGaN-based deep-ultraviolet flip-chip light-emitting diodes: a comparison to InGaN-based visible flip-chip light-emitting diodes.

Lee, Keon Hwa,Park, Hyun Jung,Kim, Seung Hwan,Asadirad, Mojtaba,Moon, Yong-Tae,Kwak, Joon Seop,Ryou, Jae-Hyun Optical Society of America 2015 Optics express Vol.23 No.16

<P>We study light-extraction efficiency (LEE) of AlGaN-based deep-ultraviolet light-emitting diodes (DUV-LEDs) using flip-chip (FC) devices with varied thickness in remaining sapphire substrate by experimental output power measurement and computational methods using 3-dimensional finite-difference time-domain (3D-FDTD) and Monte Carlo ray-tracing simulations. Light-output power of DUV-FCLEDs compared at a current of 20 mA increases with thicker sapphire, showing higher LEE for an LED with 250-관m-thick sapphire by ~39% than that with 100-관m-thick sapphire. In contrast, LEEs of visible FCLEDs show only marginal improvement with increasing sapphire thickness, that is, ~6% improvement for an LED with 250-관m-thick sapphire. 3D-FDTD simulation reveals a mechanism of enhanced light extraction with various sidewall roughness and thickness in sapphire substrates. Ray tracing simulation examines the light propagation behavior of DUV-FCLED structures. The enhanced output power and higher LEE strongly depends on the sidewall roughness of the sapphire substrate rather than thickness itself. The thickness starts playing a role only when the sapphire sidewalls become rough. The roughened surface of sapphire sidewall during chip-separation process is critical for TM-polarized photons from AlGaN quantum wells to escape in lateral directions before they are absorbed by p-GaN and Au-metal. Furthermore, the ray tracing results show a reasonably good agreement with the experimental result of the LEE.</P>

Who Becomes Exposed to Celebrity Activism on Twitter?

Seulgi Jang,Yujin Kim,Byung Joon Lee,Kyu S. Hahn 한국언론학회 2015 Asian Communication Research Vol.12 No.1

Twitter has significantly amplified celebrity presence on civic affairs. Although celebrities hold little expertise on policy affairs, they can be quite influential since their popularity allows them to reach large audiences. There is an ongoing debate concerning the democratic implications of increasing celebrity influence in policy affairs. In the current study, taking Oisoo Lee as a test case, we investigate the political implications of celebrity following on Twitter. We first compare Lee’s followers with those of ten news outlets, based on the co-following pattern among 1,442,317 Twitter users. We also had access to supplementary survey data on 11,725 members of an online survey panel who had provided their Twitter screen names. For these survey participants, we are able to match their following behavior with individual level attributes. Our results reveal that Lee’s followers are not ideologically skewed in either direction. Indeed, our survey findings confirmed that a vast majority of Lee’s followers identified themselves as independent. On the other hand, survey results show that Oisoo Lee is more likely to attract those lacking the ability to process one-sided information in a balanced manner. This raises a concern that they could be easily misinformed or misled.

휴대폰 카메라용 자동초점 구동기의 충격해석

이성민,김봉석,송준호,이수훈,이혜진,이문구,송준엽,이창우 한국공작기계학회 2008 한국공작기계학회 춘계학술대회논문집 Vol.2008 No.-

Recently, the robustness against daily impact is important according to portablization and downsizing of mobile electronics. Especially, almost parts of cellular phone should undergo drop test when they fall 1.5 m above ground. This test simulates the case when cellular phone slips through user's fingers while he is talking on the phone. This paper studies a drop test of auto focusing (AF) actuator for camera module in cellular phone. This component is composed of voice coil motor (VCM) as an actuator and leaf spring as a guide and suspension. The leaf spring's deformation is essential for the test because its permanent distortion disables the focusing, and then, a high quality photograph cannot be obtained. Up to now the drop test has been carried out after fabricating real AF actuator. We propose a dropt test model which simulates the drop test based on finite element analysis. This model makes us enable investigate the stress acting on the clamping and curved parts of leaf spring. Stress over Von Mises criterion lets the spring deformed permanently, and then AF actuator malfunctioned, It helps us to design and modify AF actuator without manufacturing the real product. And also, it saves the time and cost for the development of new products.

Miscanthus sinensis 와 타 식물과의 친근성에 관한 연구

정일구(Il Koo Lee),이호준(Ho Joon Lee),이경순(Kyung Soon Lee) 한국식물학회 1970 Journal of Plant Biology Vol.13 No.4

Althought allelopathy has been cleary established for Pinus densiflora by Lee-Monsi, the auther suspected that Miscanthus sinensis which grows vigrously in such Korean pine forests might also exhibit the phenomenon. A total of 33 species having an affinity in the Miscanthus group were recorded in the field. Out of these, five species; Patrinia scabiosaefolia, Lespedeza crytobotrya. Oenothera odorata, Raphanus sativus var. acanthiformis, and Zoysia japonica were considered the A group. Five other species which have no affinity to Miscanthus sinensis, Amaranthus patulus, Solanum nigrum, Capsella bursa-pastorris var. triangularis, Chemopodium album var. centrorubrum and Alopeculus amurensis were considered the B group. Extracts of Miscanthus sinensis were applied to determine relative germination and growth. It was found the growth in the B group was promoted by a cold water extract of Miscanthus stems and leaves, but inhibited remarkably by an extract obtained by passing cold water through Miscanthus root. As expected, growth in the A group was promoted by both experimental treatments.

서울의 Penicillinase Producing Neisseria gonorrhoeae 발생빈도(1998)

김재홍,김준호,반재용,이정우,황성주,정준규,정성태,강진문,조흔정,홍창의,정혜신,이한승,김이선,이봉길,이종호,선영우,한기덕,윤성필,이성훈,안종성,박석범,문승현,조항래,김형섭,류지호,황재영,박준홍,손상욱 한양대학교 의과대학 2001 한양의대 학술지 Vol.21 No.1

In recent years, gonorrhea has been pandemic and remains one of the most common STDs in the world, especially in developing countries. For the detection of a more effective therapeutic regimen and assessing the prevalence of Penicillinase Producing Neisseria gonorrhoeae(PPNG), we have been trying to study the patients who have visited the Venereal Disease Clinic of Choong-Ku Public Health Center in Seoul since 1980 by menas of the chromogenic cephalosporin method. In 1998, 93 strians of N. genorrhoeae were isolated, among which 60(64.5%) were PPNG. The prevalence of PPNG in Seoul, which had been decreased to 39% in 1996 after a peak of 74.3% in 1993, is increased to 64.5% in 1998.

전도성 고분자 센서 어레이를 이용한 휘발성 유기 화합물 가스 인식

이경문,주병수,유준부,황하룡,이병수,이덕동,변형기,허증수 한국센서학회 2002 센서학회지 Vol.11 No.5

휘발성 유기 화합물 가스(Volatile Organic Compounds)를 인식하고 분석하기 위하여 전도성 고분자 센서어레이를 이용한 시스템을 제작하였다. Polypyrrole와 Polyaniline을 화학중합법으로 센서에 전도성고분자막을 형성하였고 이를 통해 VOC 검지용 센서 어레이를 제작하였다. 센서어레이로부터 측정되는 다차원 데이터는 주성분분석법(PCA)과 RBF(Radial Basis Function Network)을 이용하였다. 제안된 시스템으로 VOCs 가스를 인식하는데 있어서 RBF Network이 PCA방식보다 더욱 효율적인 것으로 판단되었다. We fabricated gas recognition system using conducting polymer sensor array for recognizing and analyzing VOCs(Volatile Organic Compounds) gases. The polypyrrole and polyaniline thin film sensors which were made by chemical polymerization were employed to detect VOCs. The multi-dimensional sensor signals obtained from the sensor array were analyzed using PCA(principal component analysis) technique and RBF(radial basis function) Network. Throughout the experimental trails, we confirmed that RBF Network is effective than PCA technique in identifying VOCs.

Microstructure, Tensile and Fatigue Properties of Al–5 wt.%Mg Alloy Manufactured by Twin Roll Strip Casting

Joon‑Young Heo,Min‑Seok Baek,Kwang‑Jun Euh,Kee‑Ahn Lee 대한금속·재료학회 2018 METALS AND MATERIALS International Vol.24 No.5

This study investigated the microstructure, tensile and fatigue properties of Al–5 wt.%Mg alloy manufactured by twin rollstrip casting. Strips cast as a fabricated (F) specimen and a specimen heat treated (O) at 400 °C/5 h were produced andcompared. In the F specimen, microstructural observation discovered clustered precipitates in the center area, while in theO specimen precipitates were relatively more evenly distributed. Al, Al 6 (Mn, Fe), Mg 2 Al 3 and Mg 2 Si phases were observed. However, most of the Mg 2 Al 3 phase in the heat-treated O specimen was dissolved. A room temperature tensile test measuredyield strength of 177.7 MPa, ultimate tensile strength of 286.1 MPa and elongation of 11.1% in the F specimen and167.7 MPa (YS), 301.5 MPa (UTS) and 24.6% (EL) in the O specimen. A high cycle fatigue test measured a fatigue limit of145 MPa in the F specimen and 165 MPa in the O specimen, and the O specimen achieved greater fatigue properties in allfatigue stress conditions. The tensile and fatigue fracture surfaces of the above-mentioned specimens were observed, and thisstudy attempted to investigate the tensile and fatigue deformation behavior of strip cast Al–5 wt.%Mg based on the fi ndings.

수근관 증후군에서의 무증상성 척골신경병증

문준식,이성수,이지용,한범기,권준범,양현덕,이성익 대한신경과학회 1999 대한신경과학회지 Vol.17 No.2

Ultra-energy-efficient analog-to-digital converters based on single-electron transistor/CMOS hybrid technology for biomedical applications

Lee, Jieun,Choi, Changmin,Park, Sungwook,Chung, In-Young,Kim, Chang-Joon,Park, Byung-Gook,Kim, Dong Myong,Kim, Dae Hwan Institute of Physics 2009 Semiconductor science and technology Vol.24 No.11

<P>Ultra-energy-efficient analog-to-digital converters (ADCs) based on single-electron transistor (SET)/complementary metal-oxide-semiconductor (CMOS) hybrid technology are proposed as a solution to sense and process biomedical signals. Our results show the energy efficiency of 0.82 pJ/state, which is lower than that in previously reported energy-efficient ADCs. The performance and dissipated power of proposed ADCs are estimated and compared with those of CMOS ADCs by using Lee's SPICE model including non-ideal effects of the experimental data. While the proposed ADC shows an operating power lower by two orders of magnitude than that of the CMOS flash-type ADC, the number of required transistors is about 10% of that in the CMOS flash-type ADC. The peak-to-valley current ratio in Coulomb oscillation of SETs used in the circuit implementation has the range of 1.15–1.5, which is consistent with the experimental result of top-down approached Si-based SETs at <I>T</I> = 77–100 K. From the perspective of the immunity to the gate capacitance <I>C<SUB>cg</SUB></I> mismatch and the background charge <I>Q</I><SUB>0</SUB> noise, it is shown that the criteria of SET/CMOS hybrid ADCs are Δ<I>C<SUB>cg</SUB></I> ⩽ 0.02 × <I>C<SUB>cg</SUB></I> (with <I>C<SUB>cg</SUB></I> = 0.24 aF) and Δ<I>Q</I><SUB>0</SUB> ⩽ 0.23<I>q</I>, respectively.</P>

형상기억복합재료의 제조공정 및 신뢰성 평가

이진경,박영철,이규창,최일국,이준현 한국비파괴검사학회 2001 한국비파괴검사학회지 Vol.21 No.6

형상기억복합재료는 복합재료내에 압축잔류응력을 발생시킴으로써 재료의 인장강도를 증가시키는데 사용되어지고 있다. 본 연구에서는 형상기억복합재료를 제조하기 위하여 TiNi 강화재와 A16061 기지재를 사요하였으며 핫프레스 방법에 의해 TiNi/A16061 형상기억복합재료를 제조하였다. 그러나 핫 프레스 방법에 의해 제조된 형상기억복합재료는 하중을 받을시 강화재와 기지재 사이에 계면손상현상이 발생하였으며 이를 위하여 냉간압연을 실시하였다. 냉간압연을 받은 시험편은 냉간압연을 받지 않은 시험편에 비하여 인장강도가 현저히 증가하였다. 또한 본 연구에서는 고온에서 형상기억복합재료의 미시적 손상을 평가하기 위하여 음향방출기법을 이용하였다. Shape memory alloy has been used to improve the tensile strength of composite by the occurrence of compressive residual stress in matrix using its shape memory effect. In order to fabricate shape memory alloy composite, TiNi alloy and Al6061 were used as reinforcing material and matrix, respectively. In this study, TiNi/Al6061 shape memory alloy composite was made by using hot press method. However, the specimen fabricated by this method had the bonding problem at the boundary between TiNi fiber and Al matrix when the load was applied to it. A cold rolling was imposed to the specimen to improve the bonding effect. It was found that tensile strength of specimen subjected to cold rolling was more increased than that of specimen which did not underwent cold rolling. In addition, acoustic emission technique was used to quantify the microscopic damage behavior of cold rolled TiNi/Al6061 shape memory alloy composite at high temperature.