사망진단서(사체검안서) 상의 선행사인으로부터 사망통계의 원사인이 선정되는 비율 : 3개 대학병원에서 교부된 사망진단서를 중심으로

박우성,박석건,정철원,김우철,탁우택,김부연,서순원,김광환,서진숙,부유경 한국의료QA학회 2004 한국의료질향상학회지 Vol.11 No.1

Background : To exatnine the problems intolved in writing practice of death certificates, we cotnpated the determination of underlying cause of death for wital statistics using recorded underlying cause of death in issued death statistics. Methods : We collected 688 rnortality certificates issue in year of 2,000 from 3 university hospitals. And we also collected vital statistics from ministry of statistics. The causes of death were coded by experienced medical record wpecialists. And causes of death determined at ministry of statistics for national vita statistics were mapped to causes of death recorded at each death certificates. The rate that underlying causes of death for vital statistics were derived from underlying causes of death recorded at issued death certificaties sere analysed. Results : 64.5% of underlying cause of death for could be derived from underlying cause of death recorded at issued death certificates, 8.6% derived from intermediate cause of death, and 3.9% derived from direct cause of death. In 23% of cases, underlying cause of death could not be derived using issued death certificates. The rate that underlying cause of death for vital statistics could be derived from underlying cause of death recorded at death certificates was different between 3 university hospitals. Ane the rate was also different between death certificates and postmortem certificates. We classified the causes of death using 21 major categories. The rate was different between diseases or conditions tha caused death too. Conclusion : When we examined the correctness of death certificate writing practice using abpve methods, cortectness of writing could not be told as satisfactory. There was difference in correctness of writing between hospotals, between death certificates and postmortem certificates, and between diseases and conditions that caused death. With this results, we suggested some strategy to improve the correctness of death certificate writing practice.

The rs196952262 Polymorphism of the AGPAT5 Gene is Associated with Meat Quality in Berkshire Pigs

Woo Bum Park,Sang Mi An,Go Eun Yu,Seulgi Kwon,Jung Hye Hwang,Da Hye Park,Deok Gyeong Kang,Tae Wan Kim. Hwa Chun Park1. Jeongim Ha*.,Chul Wook Kim* 한국축산식품학회 2017 한국축산식품학회지 Vol.37 No.6

High-quality meat is of great economic importance to the pig industry. The 1-acylglycerol-3- phosphate-O-acyltransferase 5 (AGPAT5) enzyme converts lysophosphatidic acid to phosphatidic acid in the mitochondrial membrane. In this study, we found that the porcine AGPAT5 gene was highly expressed in muscle tissue, influencing meat characteristics, and we also identified a non-synonymous single-nucleotide polymorphism (nsSNP) (rs196952262, c.673 A>G) in the gene, associated with a change of isoleucine 225 to valine. The presence of this nsSNP was significantly associated with meat color (lightness), lower cooking loss, and lower carcass temperatures 1, 4, and 12 h after slaughter (items T1, T4, and T12 on the recognized quality scale, respectively), and tended to increase backfat thickness and the waterholding capacity. These results suggest that nsSNP (c.673A>G) of the AGPAT5 gene is a potential genetic marker of high meat quality in pigs.

북한산국립공원의 계류수질 보전 전략(I)

박재현,우보명,김우룡,안현철,조현서,추갑철,김춘식,최형태,Park, Jae-Hyeon,Woo, Bo-Myeong,Kim, Oue-Ryong,Ahn, Hyun-Chul,Cho, Hyun-Seo,Choo, Gab-Chul,Kim, Choon-Sig,Choi, Hyung-Tae 한국환경복원기술학회 2001 한국환경복원기술학회지 Vol.4 No.3

This study was conducted to investigate physicochemical property changes from July 1998 to August 2001 in Mt. Bukhansan National Park. Four water sampling points were selected to measure the quality of stream water in the northeastern part of the Mt. Bukhansan National Park. The results were summarized as follows; In spring, the average pH of stream water was below the first class of the river water quality standard, while it was normal level in summer. The average electrical conductivity was about 2.3~3.3 times higher in downstream water than in upstream water during spring and summer. The contents of anions($Cl^-$, $NO{_3}^-$, $SO{_4}^{2-}$) were about 1.1~7.4 and 0.4~11.4 times higher in downstream than in upstream water, respectively. These results indicate that water quality was poorer in downstream than in upstream water. We suggest that stream water in the Mt. Bukhansan National Park should be protected from impacts of snow melting mineral particles in spring season and human impacts like wastewater of point source in summer season.

김치유래 젖산균의 균체지방산 분석을 이용한 분류학적 연구

이정숙,정민철,김우식,이근철,김홍중,박찬선,이헌주,주윤정,이근종,안종석,박완,박용하,민태익 한국미생물생명공학회 ( 구 한국산업미생물학회 ) 1996 한국미생물·생명공학회지 Vol.24 No.2

표준균주를 포함한 230여개의 김치유래 젖산균에 대한 균체지방산(FAMEs)을 분석하였다. FAMEs profiles는 Euclidian Distance 17.5에 의해 7개의 Major Cluster와 1개의 Single Cluster로 나뉘어졌다. 이중 A, B, C 및 Cluster는 Leuconostoc속으로 분석되어졌고, F는 Lactobacillus속으로 분석되어졌다. 그리고 E와 G cluster는 두개의 Genus가 혼재되어 나타났으며 보충적인 연구가 필요하다. 앞으로 김치유래 젖산균의 균체지방산 분석결과를 기반으로 한 데이타베이스에 95가지 탄소원을 이용하는 수치분류학적 접근방법 및 Pyrolysis Mass Spectrometry 등의 화학적 분석 방법과 분자친화적 연구를 통한 종합적 분류정보 체계가 갖추어지면 젖산균의 신속, 정확한 동정 및 연구에 활발히 이용되어질 것이다. Two hundreds and thirty lactic acid bacteria, mostly isolated from Kimchi, including type strains were sued for analysis of cellular fatty acids. The 230 test strains were recoverd in 7 major and 1 single clusters defined a Euclidian distance of 17.5. These aggregate taxa were equivalent to the genus Leuconostoc (aggregate group A, B, C and D), and the genera Leuconostoc and Lactobacillus (aggregate group G). It is concluded as evident that FAMEs (Fatty Acid Methyl Esters) profile of cell can be used as a criterion in classification of lactic acid bacterial from kimchi. Additional comparative taxonomic studies need to be carried out on well chosen representative strains to determine the most appropriate methods of value.

내사시에서 양안 내직근후전술 시 기능적적도부 및 팍스의 수술양을 고려한 군 간 수술성적비교

강병완,박상우,윤경철,허환,Byung Wan Kang,MD,Sang Woo Park,MD,PhD,Kyung Chul Yoon,MD,PhD,Hwan Heo,MD,PhD 대한안과학회 2012 대한안과학회지 Vol.53 No.1

Purpose: To compare the surgical outcomes of functional equator-considering and Parks’ methods in infantile esotropia and partially accommodative esotropia. Methods: The medical records of 96 patients with infantile esotropia and partially accommodative esotropia who underwent bilateral medial rectus muscle recession by functional equator-considering and Parks’ methods were reviewed retrospectively. The surgery success rate at 1 month, 3 months, 6 months and 12 months was compared by the deviation angle measurement. Results: Overall success rates were not statistically different between the 2 groups. Additionally, there were no differences in surgical success rate of functional equator-considering and Parks’ methods in infantile esotropia and partially accommodative esotropia. When the patients were divided into 2 groups based on 40 PD, no significant difference in success rate between the 2 groups was observed. When patients were divided into 2 groups based on 22 mm of axial length, there was no statistical difference observed. Postoperative overcorrection was 2 (4%) in the functional equator group and 3 (6.5%) in Parks’ method group and postoperative undercorrection was 9 (18%, 19.6%) in each group. The incidence of undercorrection in the Parks’ method group was significantly higher in the greater than 22 mm axial length group (7, 35.0%) than in the less than 22 mm group (2, 7.7%) (p = 0.029). Conclusions: There was no statistically significant difference in surgical success rate between the functional equator and Parks’ methods in infantile esotropia and partially accommodative esotropia. J Korean Ophthalmol Soc 2012;53(1):138-144

한국인 직무 스트레스 측정도구의 개발 및 표준화

장세진,고상백,강동묵,김성아,강명근,이철갑,정진주,조정진,손미아,채창호,김정원,김정일,김형수,노상철,박재범,우종민,김수영,김정연,하미나,박정선,이경용,김형렬,공정옥,김인아,김정수,박준호,현숙정,손동국 大韓産業醫學會 2005 대한직업환경의학회지 Vol.17 No.4

Background and Purposes: Over the past three decades, numerous studies performed in Korea have reported that job stress is a determinant risk factor for chronic diseases and work disability. Every society has its own culture and occupational climate particular to their organizations, and hence experiences different occupational stress. An occupational stress measurement tool therefore needs to be developed to estimate it objectively. The purpose of this study is to develop and standardize the Korean Occupational Stress Scale (KOSS) which is considered to be unique and specific occupational stressors in Korean employees. Subjects and Methods: Data were obtained from the National Study for Development and Standardization of Occupational Stress (NSDSOS Project: 2002-2004). A total of 12,631 employees from a nationwide sample proportional to the Korean Standard Industrial Classification and the Korean Standard Occupational Classification were administered. The KOSS was developed for 2 years (2002-2004). In the first year, we collected 255 items from the most popular job stress measurement tools such as JCQ, ERI, NIOSH and OSI, and 44 items derived from the a qualitative study (depth interview). Forty-three items of KOSS, in the second year, were retained for use in the final version of the KOSS by using Delphi and factor analysis. Items were scored using conventional 1-2-3-4 Likert scores for the response categories. Results: We developed eight subscales by using factor analysis and validation process: physical environment (3 items), job demand (8 items), insufficient job control (5 items), interpersonal conflict (4 items), job insecurity (6 items), organizational system (7 items), lack of reward (6 items), and occupational climate (4 items). Together they explained 50.0% of total variance. Internal consistency alpha scores were ranged from 0.51 to 0.82. Twenty-four items of the short form of the KOSS (KOSS-SF) were also developed to estimate job stress in the work setting. Because the levels of the subscales of occupational stress were gender dependent, gender-specific standard norms for both the 43-item full version and the 24-item short form using a quartile for the subscales of KOSS were presented. Conclusion: The results of this study suggest that KOSS might be an appropriate measurement scale to estimate occupational stress of Korean employees. Further and more detailed study needs to be conducted to improve the validity of this scale.

주사선 전자현미경을 이용한 집적회로 공정기술의 응용

朴善宇,姜順鍾,金鐵柱 서울市立大學 1990 論文集 Vol.24 No.-

As to increase of density in integrated circuit(IC), Electron Beam(EB) lithography method is much anticipated to improvement of IC process lithography technology. we tried this method is carried out by Scanning Electron Microscops(SEM) that is originally reseble with EB main lithography equipment in IC process. This execution contains an interface hardware organization and a new lithography algorithm using IBM PC. Experiment results obtained fine pattern in minimum design rule 10um. This results will be contributed in high through-put and low cost IC Process.

저속 동영상 부호화를 위한 프랙탈 영상 압축

박용기,정진욱,박철우,김두영 東亞大學校 附設 情報通信硏究所 1997 情報通信硏究所論文誌 Vol.5 No.1

This paper presents a compression technique based on fractal theory for fast encoding and decoding image sequences for very low bit-rates image communication instead of DCT coding which is a standard compression method of moving image used in the H.261. or MPEG. We remove temporal redundancy in interframe of image sequences by moving prediction compensation method and spatial redundancy in intraframe, by fractal theory. In the moving prediction coding, we performed coding for block which have higher threshold values than the allowed ones through the fractal structure of their still images. We also employ domain partitioning and multi-layer block partitioning using edge detection method to enhance the fidelity of reconstructed image, coding speed, and compression rate. We apply this method to moving images used for video telephone and perform simulations. The result of our experiment shows that using fractal structure is better than using DCT structure at low bit-rates such as 4.8-64Kbit/sec.

친수성 프라이머를 이용한 교정용 브라켓 접착시의 전단결합강도에 관한 연구

박철완,차경석,이진우 대한치과교정학회 2002 대한치과교정학회지 Vol.32 No.4

본 연구의 목적은 산부식된 법랑질에 수분이나 타액이 오염되어도 적절한 접착력을 얻을 수 있다고 소개된 교정용 친수성 프라이머를 이용한 교정용 브라켓 접착시 타액 오염 정도에 따른 전단결합강도와 접착 파절 양상을 기존의 소수성 프라이머와 비교함으로써 임상적 유용성을 평가하는 것이다. 사람의 소구치를 강철 원통에 교정용 레진으로 포매하여 만든 시편에 기존의 소수성인 Transbond XT primer와 친수성인 Transbond MIP primer 각각에 대하여 광중합형 접착 레진으로 브라켓을 접착시, 인공 타액을 이용한 오염정도에 따른 전단결합강도를 만능시험기로 측정하고, 접착 파절 양상을 stereomicroscope로 관찰하여 다음과 같은 결과를 얻었다. 1. 건조 상태에서 Transbond XT primer와 Transbond MIP primer의 전단결합강도는 유의한 차이가 없었다. 2. 타액 오염시 그정도에 상관없이 Transbond MIP primer는 Transbond XT primer에 비해 유의하게 높은 전단결합 강도를 나타냈다(p<0.001). 3. Transbond MIP primer는 한겹의 타액 오염시 건조 상태와 전단결합강도의 유의한 차이가 없었으나, 두 겹의 타액 오염시에는 유의하게 낮은 결합강도를 나타냈다(p<0.01). 4. 접착 파절 형태는 타액 오염의 정도에 따라 평균 접착제 잔류 지수가 낮아지는 경향을 나타냈다. Transbond MIP primer는 타액 오염시에도 반 이상이 브라켓-레진 계면에서의 파절을 보였으나, Transbond XT primer는 타액 오염시 대부분의 경우 레진-법랑질 계면에서의 파절을 나타냈다. 이상의 실험 결과, 교정용 친수성인 Transbond MIP primer는 수분 조절이 어려운 임상 상황에서 적절한 결합강도를 얻을 수 있는 좋은 방법으로 생각된다. The purpose of this study was to evaluate the clinical effectiveness of hydrophilic primer, which claim to retain adequate bond strength on moistened enamel resulting from moisture or saliva contamination, by comparing the shear bond strength and adhesive failure patterns of brackets bonded using hydrophilic primer and conventional hydrophobic primer. Brackets were bonded to human premolars embedded in metal cylinders utilizing light cured adhesive, primed with either a hydrophilic primer(Transbond MIP primer) or a conventional hydrophpbic primer(Transbond XT primer). Each sample was exposed to varying degrees of artificial saliva contamination during the priming process. The shear bond strength was measures using a universal testing machine, and the adhesive failure patterns after debonding were visually examined by stereomicroscope and assessed using the adhesive remnant index(ARI). The results were as follows : 1. In dry conditions, no significant differences in shear bond strength between Transbond MIP and Transbond XT primers were found. 2. Trandbond MIP primer exhibited a significantly higher shear bond stregth than Transbond XT primer in saliva-contaminated conditions, regardless of the degree of contamination. 3. When contaminated with one coat of saliva, Transbond MIP primer did not exhibit significant differences in shear bond strength compared to the dry condition. When contaminated with two coats of saliva, Transbond MIP primer exhibited a significantly lower shear bond strength compared to the dry condition. 4. The adhesive remnant index of the adhesive failure pattern had a tendency to decrease, as the degree of saliva contamination increased .Bracket-adhesive interface failure was observed in more than half of the saliva contaminated samples utilizing Transbond MIP primer, whereas the bond failure sites of the Transbond XT primer samples occurred almost exclusively at the adhesive-enamel interface in saliva-contaminated conditions. The results of this study suggest that in cases where moisture control is difficult, Transbond MIP primer is an effective alternative to conventional hydrophobic primers.

CMP 공정에서 결함밀도 감소를 위한 POU 슬러리 필터의 특성과 탈이온수의 고분사법에 의한 패드수명의 개선

박성우,김철복,정소영,서용진 대불대학교 2001 論文集 Vol.7 No.1

As the integrated circuit device shrinks to smaller dimensions, chemical mechanical polishing (CMP) process has been widely used to planarize dielectric layers, which was required for the global planarization of inter-metal dielectric (IMD) layer with free-defect. However, as the IMD layer gets thinner, micro-scratch lead to severe circuit failure which affect yield. CMP slurries can contain particles exceeding 1 ㎛ in size, which could cause micro-scratches are generated by agglomerated slurry, solidified and attached slurry in pipe line of slurry supply system. To prevent agglomerated slurry particle from inflow, we installed 0.5 ㎛ point of use (POU) filter, which is depth-type filter and has 80% filtering efficiency for the 1.0 ㎛ size particle. In this paper, we have studied the relationship between defect generation and polished wafer counts to understand the exact efficiency of the slurry filtration, and to find out the appropriated pad usage. Our experimental results of micro-scratch formation, it is shown that slurry filter plays an important role in determining consumable pad lifetime. The filter lifetime is dominated by the defects. We have concluded that slurry filter lifetime is fixed by the degree of generating defects, and it is impossible to prevent defect-causing particles perfectly through the depth-type filter. Thus, we suggest that it is necessary to optimize the slurry flow rate, and to install the high spray bar of de-ionized water (DIW) with high pressure, to overcome the weak-point of depth type filter.