http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
허진경,양환석,박승규,장근실,김종민 朝鮮大學校 統計硏究所 2007 統計硏究所論文誌 Vol.9 No.1
클라이언트로부터 전송되는 인증 데이터를 실시간으로 서버에서 분석하여 처리하는 시스템의 경우에는 입력되는 데이터의 양에 비례하여 서버의 부담은 증가하게 된다. 이때 서버에서는 데이터의 병목현상이 발생하게 되고, 이는 바로 전체적인 시스템의 성능을 저하시키는 결과를 초래하게 된다. 본 논문에서는 데이터 처리의 병목현상을 해결하여 시스템의 성능을 높일 뿐만 아니라, 인터넷상의 유휴 서버들을 활용할 수 있게 하기 위한 방안으로 분산처리 기술을 이용한 전처리 작업 시스템과 그 성능을 향상시키기 위한 분산 객체 활성화 시스템을 제안한다.
신도시 중산층 아파트 지역에서의 하수발생량 및 절수 홍보 효과
金應鎬,許順哲,趙珍奎,黃煥國 弘益大學校 科學技術硏究所 1996 科學技術硏究論文集 Vol.7 No.1
Both pattern of water use and pollutant load were investigated in the apartment area for the middle class of a new town. Especially the analysis of the effect of saving water under public information of saving water was used to search possible quantities of saving water. The results of this survey showed that each household had 3.84 persons with water use rate of 262 L/capitaㆍd on an average. The average domestic loading for COD, BOD, SS, T-N and T-P were 107.5, 49.5, 50.1, 7.7 and 1.6 g/capitaㆍd, respectively. Water used by residential households consists of water for washing clothes, toilets, bath, showers, kitchen, washing up and sweeping. Among above sources toilet water (26%) occupied the largest component of residential water use. Also the reduction of total water use was 12.3% by public information of saving water.
일반화된 Active Contour Model을 이용한 변형 물체의 움직임 추적과 분석에 관한 연구
이웅기,허영남,양환석 조선대학교 기초과학연구소 1997 自然科學硏究 Vol.20 No.1
본 논문은 일반화된 Active Contour Model을 이용하여 연속적으로 입력되는 영상에서 변화하는 물체의 움직임 추적과 분석 방법을 제안한다. 그리고 연속적인 영상 프레임에서 물체 경계의 추적은 외곽선 모델의 에너지 함수를 최소화하므로써 이루어진다. 물체의 추적, 적응적인 움직임 예측의 효율을 증가시키기 위하여 입력되는 영상에 존재하는 일시적인 움직임 정보를 이용하였고 물체의 움직임과 변형 처리를 위하여 움직임 추적 알고리즘으로부터 변형 행렬을 유도했다. 본 논문에서 제안한 일반화된 Active Contour Model을 입술추적 실험의 행동 분석에 적용하였다. 그리고 그 응용에서 전위 벡터와 변형 행렬의 일시적인 변화는 인간 얼굴 특징의 국부적 변형을 설명하는데 이용된다.
김종민,이웅기,장근실,양환석,허진경,박승규 朝鮮大學校 統計硏究所 2007 統計硏究所論文誌 Vol.9 No.1
최근 사용자 친화형 유저 인터페이스 구현을 위해 인간의 손 형상을 실시간으로 인식하는 연구의 중요성이 부각되고 있다. 그러나 인간의 손은 자유도가 크기 때문에 손 형상을 정확히 인식하기란 매우 어렵고 또한 피부색과 유사한 색을 가지는 복잡한 배경에서는 더욱 곤란하다. 본 논문에서는 별도의 센서를 부착하지 않고 카메라를 사용하여 피부색 정보에 의한 손 형상을 분할한 후 손가락 끝 점을 찾는다. 찾은 손가락 끝 점을 이용하여 방향을 탐지하는 알고리즘에 대해 기술한다. 이 방법은 템플리트 매칭을 이용하여 손가락 끝 점을 탐색한 후 찾은 손가락 끝 점과 손목의 중심을 이용하여 전, 후, 좌, 우 방향을 탐지한다. 제안하는 방법을 이용하여 3D 가상현실 공간에서의 네비게이션(Navigation)에 응용하였으며, 실험결과 전진, 후진 및 좌측, 우측의 방향전환도 매우 좋은 결과를 보였다. 또한 본 논문에서 제안하는 방법은 마우스, 키보드, 조이스틱 등의 조작 없이 전, 후, 좌, 우 방향전환을 사용자가 직관적으로 지시함으로써 보다 자연스러운 인간과 컴퓨터의 상호작용을 제공할 수 있을 것이다.
허환(Hwan Heo),이지우(Ji Woo Lee),이원오(Won Oh Lee),이의철(Eui Chul Lee),박강령(Kang Ryoung Park) 대한인간공학회 2011 大韓人間工學會誌 Vol.30 No.1
Objective: Making a new ergonomic interface system based on camera vision system, which helps the handicapped in home environment. Background: Enabling the handicapped to manipulate the consumer electronics by the proposed interface system. Method: A wearable device for capturing the eye image using a near-infrared(NIR) camera and illuminators is proposed for tracking eye gaze position(Heo et al., 2011). A frontal viewing camera is attached to the wearable device, which can recognize the consumer electronics to be controlled(Heo et al., 2011). And the amount of user's eye fatigue can be measured based on eye blink rate, and in case that the user's fatigue exceeds in the predetermined level, the proposed system can automatically change the mode of gaze based interface into that of manual selection. Results: The experimental results showed that the gaze estimation error of the proposed method was 1.98 degrees with the successful recognition of the object by the frontal viewing camera(Heo et al., 2011). Conclusion: We made a new ergonomic interface system based on gaze tracking and object recognition Application: The proposed system can be used for helping the handicapped in home environment
Heo, Sung Hwan,Ihsan, Aamir,Yoo, Seung Hwa,Ali, Ghafar,Cho, Sung Oh Springer 2010 Nanoscale research letters Vol.5 No.4
<P>Stable carbon nanotube (CNT) field emitters for a vacuum-sealed miniature X-ray tube have been fabricated. The field emitters with a uniform CNT coating are prepared by a simple drop drying of a CNT mixture solution that is composed of chemically modified multi-walled CNTs, silver nanoparticles, and isopropyl alcohol on flat tungsten tips. A highly thermal- and electrical-conductive silver layer strongly attaches CNTs to the tungsten tips. Consequently, the field emitters exhibit good electron emission stability: continuous electron emission of around 100 μA at 2.3 V/μm has stably lasted over 40 h even at non-high vacuum ambient (~10<SUP>−3</SUP> Pa).</P>