유니섹스모드 수용도와 성격 특성과의 관계 연구

김영숙,박은영,이영선,허영미,홍은영 효성여자대학교 가정대학 학도호국단 1985 家政大論集 Vol.4 No.-

The purposes of this study were 1) to investigate the relationship between theacceptance oF unisex mode and rigidity character and 2) to find out any significantdifference in the acceptance of unisex mode according to grade, major and sex. The questionnaires were administered to 133 female and 174 male college students. The results; 1. The accptance of unisex mode was not related with rigidity character. 2. The acceptance of female unisex mode was higher than male unisex mode. 3. Females showed higher tendency in the acceptance of unisex mode and fashioninnovativeness than males. 4. No significant differences were found in the acceptance of unisex mode accordingto grade and major level.

Critical Temperatures for Initiating and Arresting Delayed Hydride Cracking in a Zr-2.5Nb Pressure Tube

Kim, Young Suk,Im, Kyung Soo,Cheong, Yong Moo Trans Tech Publications, Ltd. 2005 Key Engineering Materials Vol.297 No.-

<P>The hydrogen concentration limit and critical temperatures for a delayed hydride cracking (DHC) in zirconium alloys have been reanalyzed using Kim’s DHC model that a driving force for DHC is not the stress gradient but the supersaturated hydrogen concentration or ∆C arising from a hysteresis of the terminal solid solubility on a heating and on a cooling. The DHC initiation occurs generally at the temperatures corresponding to the terminal solid solubility for precipititation (TSSP), demonstrating that the supercooling from the terminal solid solubility for dissolution (TSSD) is required to initiate the DHC. The DHC arrest temperatures correspond to the temperatures where the ∆C is reduced to zero. Therefore, we conclude that the ∆C is the driving force for the DHC and that the Kim’s DHC model is feasible.</P>

남자 고등학교 세팍타크로 경기의 공격기술에 관한 분석 연구

김영호,고문석,제임스전,이영익,차정훈,현종건,김범수,임종만,이석인 한국스포츠리서치 2004 한국 스포츠 리서치 Vol.15 No.6

This research aims at analysis of attack technique in sepaktakraw games. For this purpose, 3 high school coaches observed and recorded each game Five times in videos of high school male players' thirty games in 2003. The conclusion from the analysis of the recorded data are as follows. 1. Scissors spike was the most popular (favorite) attack technique. Rolling spike, tapping spike and heading spike was popular in order. 2. Heading spike showed the highest success rate (73.5%) in attack technique. And tapping spike (69.5%), scissors spike (57.8%) and rolling spike (67.11) showed a lower success rate in order. In failure rate, heading spike (5.5%), tapping spike (36.5%), scissors spike (32.2%) and rolling spike (32.9%) had a higher percentage in order. 3. When receive was stable, the success rate in attach technique was 47.1%, the failure rate was 20.1%. On the other hand, when receive was unstable, the success rate in attach technique was 16.5%, the failure rate was 14.3%.

18–30세 사이에 발생하는 뇌경색의 특징, 다기관 레지스트리 연구

장윤경,송태진,김용재,허지회,이경열,김영은,장민욱,조수진,강석윤 이화여자대학교 의과학연구소 2017 EMJ (Ewha medical journal) Vol.40 No.3

Objectives: Although there have been several reports that described characteristics for young age stroke, information regarding very young age (18–30 years old) has been limited. We aimed to analyze demographic factors, stroke subtype, and 3-month outcome in acute ischemic stroke patient who have relatively very young age in multicenter stroke registry. Methods: We evaluated all 122 (7.1%) consecutive acute ischemic stroke (within 7 days after symptom onset) patients aged 18 to 30 from 17,144 patients who registered in multicenter prospective stroke registry, 1997 to 2012. Etiology was classified by Trial of Org 10172 in Acute Stroke Treatment criteria. Stroke severity was defined as National Institutes of Health Stroke Scale (NIHSS) and stroke outcome was defined by modified Rankin scale (mRS) at 3 months after index stroke. Results: The mean age of all included patients was 25.1±3.7 years and 76 patients (62.2%) were male. The median NIHSS at admission was 4. Considering stroke subtype, 37 patients (30.3%) had stroke of other determined etiology (SOD), 37 (30.3%) had undetermined negative evaluation (UN) and 31 (25.4%) had cardioembolism (CE) were frequently noted. After adjusting age, sex and variables which had P<0.1 in univariable analysis (NIHSS and stroke subtype), CE stroke subtype (odds ratio, 4.68; 95% confidence interval, 1.42–15.48; P=0.011) were significantly associated with poor functional outcome (mRS≥3). Conclusion: In very young age ischemic stroke patients, SOD and UN stroke subtype were most common and CE stroke subtype was independently associated with poor discharge outcome.

Temperature Dependence of Delayed Hydride Cracking Crack Velocity in Zr-2.5Nb Tubes

Young Suk Kim(김영석) 대한기계학회 2005 대한기계학회 춘추학술대회 Vol.2005 No.11

Delayed hydride crack tests were conducted on Zr-2.5Nb tubes with different distributions of the β-Zr at temperatures ranging from 125 to 300 ℃. Compact tension specimens charged to 27 to 100 ppm hydrogen were used to determine temperature dependences of their DHC velocity (DHCV) and striation spacing. The Zr-2.5Nb tube with a higher yield strength and a seimi-continuous β-Zr has a higher DHCV and a smaller striation spacing than that with a fully discontinuous β-Zr and a lower yield strength. It is found that the activation energy for the DHCV is the sum of the activation energy for hydrogen diffusion and the striation spacing representing the hydrogen concentration gradient at the crack tip. Quantitative contribution of hydrogen diffusion nad the hydrogen concentration gradient to the DHCV is discussed. This study provides supportive evidence to the feasibility of Kim’s DHC model.

數種의 市販 淸凉飮料에 依한 琺瑯質 脫灰效果

김영숙,신영림,송근배,김영진 慶北大學校 齒科大學 1992 慶北齒大論文集 Vol.9 No.1

The purpose of this study was to investigate the effects of tooth enamel dissolution by commercial beverages. Five kinds of beverages(cola, cider, aquarius, boribori and sunkist orange) were selected for test medium and sixteen of extracted 3rd molar were used for tooth enamel specimens. The acidity of each beverage was determined with pH meter and the concentration of total glucose was checked with Glucose kit and U-V spectrophotometer. The dissolved calcium was determined by Atomic Absoprtion Spectrophotometer and the change of enamel surfaces were observed with Scanning Electron Microscopy(× 400 & × 1,000 magnification). All collected data were analyzed by one-way & two-way ANOVA in SPSS/PC^+ program. The obtained results were as follows: 1. The major containing acid type of cola beverage was phosphoric acid but the other beverages(cider, aquarius, boribori and sunkist) were citric acid. The pH of each beverage was lowest in cola and sport drink, cider, boribori, fruit juice in ascending order(F=205.85, p<0.001), the average pH of 5 kinds of beverage was 2.84 ±0.04, all beverages used in this experiment were low enough to decalcify the tooth enamel. The total glucose concentration of each beverage was 2.74% in aquarius, 2.78% in cider, 3.96% in sunkist, 4.23% in boribori and 4.27% in cola. 2. The average dissolved calcium concentration in 5cc of beverage was 1.54±0.12ppm/5㎖ of HNO_3 in cola, 1.76±0.38ppm in sunkist, 1.90±0.09ppm in boribori, 3.03±0.09ppm in aquarius, 3.59±0.38ppm in cider and the final calcium contents, which is extrated original calcium contents from total calcium contents after 120 minutes were highest in cola(1.27ppm) and aquarius(1.02ppm), cider(0.58ppm), sunkist(0.45ppm), boribori(0.33ppm) in the order(p<0.05). 3. The direct proportional relationship was not found between the degree of surface change on Scanning Electron Microscopy and the amount of dissolved calcium per immersion time. But the more the immerging time was lengthened, the more surface change was observed. The surface change of 120 minutes group was more remarkable than 30 and 60 minutes immerged group in each beverage.

노치 형상 및 냉각속도에 따른 Zr-2.5Nb 압력관의 DHC거동

김상재,김영석,임경수,김성수,정용무 대한금속재료학회 2003 대한금속·재료학회지 Vol.41 No.1

The objective of this study is to investigate the delayed hydride cracking (DHC) velocity and the incubation time for the water-quenched and furnace-cooled Zr-2.5Nb tube with the different radius of a notch tip. DHC tests were carried out at constant K_1 of 20 MPa√m and 250℃ on the cantilever beam (CB) specimens subjected to furnace cooling or water quenching after electrolytic charging with 57 or 72 ppm hydrogen, respectively. An acoustic emission sensor was attached to the CB specimens to detect the incubation time before the start of DHC. The shape of the notch tip changed from the fatigue crack to the dull crack with its radius ranging from 0.1 to 0.15 mm. The DHC incubation time increased remarkably with the increasing radius of the notch tip, which appeared more strikingly on the furnace-cooled CB specimens than on the water-quenched ones. However, both furnace-cooled and water-quenched CB specimens indicated little change in the DHC velocity with the radius of the notch tip unless their notch tip exceeded 0.125mm. These results demonstrate that the uncleation rate of hydrides at the notch tip determines the incubation time and the DHC velocity becomes constant after the concentration of hydrogen at the notch tip reaches the terminal solid solubility for dissolution (TSSD). This observation agrees well with Kim's DHC model. A difference in the incubation time and the DHC velocity between the furnace-cooled and water-quenched specimens is discussed in terms of the uncleation rate of hydrides at the notch tip and the hysteresis of hydrogen solubility.

Direct effectiveness of pneumococcal polysaccharide vaccine against invasive pneumococcal disease and non-bacteremic pneumococcal pneumonia in elderly population in the era of pneumococcal conjugate vaccine: A case-control study

Kim, Jong Hun,Chun, Byung Chul,Song, Joon Young,Kim, Hyo Youl,Bae, In-Gyu,Kim, Dong-Min,Choi, Young Hwa,Jun, Yoon Hee,Choi, Won Suk,Kang, Seong Hee,Kwon, Hyun Hee,Jeong, Hye Won,Kee, Sae Yoon,Hur, Jia Elsevier Ltd. 2019 Vaccine Vol. No.

<P><B>Abstract</B></P> <P><B>Background</B></P> <P>While herd effects and serotype replacement by childhood pneumococcal protein conjugated vaccines (PCVs) continues to accumulate worldwide, direct effectiveness of 23-valent pneumococcal polysaccharide vaccine (PPV23) against pneumococcal diseases in the elderly has been challenged. We estimated the direct effectiveness of PPV23 in the elderly population.</P> <P><B>Methods</B></P> <P>For a hospital-based case-control study, cases of invasive pneumococcal disease (IPD) and non-bacteremic pneumococcal pneumonia (NBPP) (adults ≥ 65 years) were identified in 14 hospitals participated in the pneumococcal surveillance program from March 2013 to October 2015, following implementation of PPV23 national immunization program (NIP) for the elderly in the Republic of Korea. Controls matched by age, sex, and hospital were selected at ratios of 1:2 (IPD) or 1:1 (NBPP). Clinical data and vaccination records were collected. Vaccine effectiveness was calculated as (1-adjusted odds ratio) × 100.</P> <P><B>Results</B></P> <P>We enrolled 148 IPD and 557 NBPP cases, and 295 IPD and 557 NBPP controls for analyses. Overall effectiveness of PPV23 against IPD was 28.5% [95% confidence interval (CI) −5.8%–51.6%] and against NBPP was 10.2% (-15.1-30.6) in all patients ≥ 65 years. However, in subgroup analysis of patients aged 65–74 years, PPV23 was protective against IPD [effectiveness 57.4% (19.4–77.5)] and against NBPP [effectiveness 35.0% (2.3–56.7)]. Furthermore, serotype-specific effectiveness of PPV23 against IPD was 90.6% (27.6–98.8) for PPV23-unique serotypes and 81.3% (38.6–94.3) for PPV23 serotypes excluding serotype 3.</P> <P><B>Conclusions</B></P> <P>This study indicates that PPV23 with broad serotype coverage might be beneficial in preventing IPD and NBPP due to non-PCV13 serotypes in the young-elderly, with potentially increasing effectiveness in the setting of childhood PCV NIP.</P> <P><B>Highlights</B></P> <P> <UL> <LI> National immunization program for PPV23 for the elderly was implemented in Korea. </LI> <LI> PPV23 was effective against IPD and NBPP for young elderly patients aged 65–74. </LI> <LI> Effectiveness of PPV23 against IPD was higher for PPV23 unique serotypes. </LI> <LI> PPV23 was non-protective against IPD caused by PCV13 serotypes. </LI> </UL> </P>

PVA-ECC를 활용한 Half PC 복합체의 역학적 특성에 관한 실험적 연구

김재환,김영덕,김갑수,조봉석,장종호,김무한 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2

ECC represents one particular class of HPFRCC, which are defined by an ultimate strength higher than their first cracking strength and the formation of multiple cracking during the inelastic deformation process. This study is to provide the fundamental data for the development of hybrid construction method such as the half PC(Precast concrete) reinforced by PVA-ECC, the mechanical properties of half PC according to the alteration of properties of PVA-ECC in terms of the type of fiber, Vr, S/M, placing height of PVA-ECC, are experimentally investigated. As the results. it is found that the half PCs of PVA-ECC have very higher mechanical performance in terms of yield load, strain capacity beyond yield point and maximum flexural load than that of mortar. Also, flexural crack in the half PCs of PVA-ECC are not localized at first crack and are growed to many micro crack, especially multiple cracking in specimen of P(12)-30-0.1ㆍ3 occurred.

생체분해성 망막압정을 이용한 망막고정에 대한 실험적 연구

김용백,민병무,김창식,박근성,김승영,길숙종,조항진,이성복,노승무,송규상,강대영,조준식,양준묵,정경수,최선웅,이진호,김학용,인현빈 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

Biodegradable retinal fixation devices obtain mechnical fixation of the retina with desirable chorioretinal scarring and with the potential for local, sustained release of antimetabolites and steroids to inhibit proliferative vitreoretinopathy. We manufactured a biodegradable retinal tack with barb that was designed in order to prevent intrusion from implantation of retinal tacks. This study was carried to evaluate the efficacy for retinal fixation and the capability for sustained release of drugs with a newly designed biodegradable retinal tack Biodegradable retinal tacks were made of polymers of glycolic acids and were designed with barbs in a shape to prevent the disinsertion. Biodegradale retinal tacks are divided into 3 parts, a conical portion that is inserted into the sclera, a cylinder portion that remains in the vitreous, and a neck portion between the pin and the cylinder. The tapered conical end was manufactured to allow easy insertion through the retina and choroid into the sclera. A cylinder portion was manufactured with a tapered angle that fixes firmly into the orifice of 19 gauge spinal needle. A neck portion, 0.4 mm in diameter, was designed to prevent disinsertion from following implantation of retinal tack. The applicator was a 19 gauge spinal needle and its orifice was prepared to 15°angle to accept the tapered cylinder portion of the retinal tack. The retinal tacks, secured in the needles, were passed through the formed vitreous and inserted into the retina, choroid, and sclera and were released by pushing the internal needle, usually within 2-3mm of the medullary ray of the posterior rabbit retina A retinal tack was placed in each of 8 pigmented rabbit eyes. Slit-lamp biomicroscopy, indirect ophthalmoscopy and fundus photography were performed periodically from 1 day to 8 weeks after surgery. Eight eyes were enucleated and studied by light microscopy at 8 weeks. Biomicroscopic evaluation of the animals revealed edemas adjacent to the retinal surfaces immediately after insertion of the biodegradable retinal tacks in all the animals. These edemas disappeared after 1 week. The first noticeable change in the size of retinal tacks was shown after 2weeks. The size of the retinal tacks gradually got smaller, decreasing to about one-half at 4 weeks and about one-third at 8 weeks. All retinal tacks remained in inserted places without any movement for an 8 week period. On light microscopy, epiretinal proliferations were seen to extend into the vitreous cavity. Cellular capsules that lined the inner aspect of the scleral defect caused by tack insertion were found. However the adjacent retina had a normal cytologic appearance and architecture in all specimens. We manufactured a biodegradable retinal tack that is designed to prevent intrusion from implantation of retinal tacks. All biodegradable retinal tacks reduce in size with time, but no retinal tacks extruded from the inserted place. The newly designed biodegradable retinal tack can be used for retinal fixation and may be used as a vehicle for the introduction of pharmacologic agents to prevent the cellular events that promote proliferative vitreoretinopathy.