http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
인공 치아우식 발생 모델에서 디지털 방사선 공제술을 이용한 인접면 치아우식증의 진단
박정훈,최용석,황의환,이기자,최삼진,박영호,김경숙,진현석,홍경원,오범석,박헌국 대한구강악안면방사선학회 2009 Imaging Science in Dentistry Vol.39 No.1
Purpose : The purpose of the experiment was to evaluating the diagnostic ability of dental caries detection using digital subtraction in the artificial caries activity model. Materials and Methods : Digital radiographies of five teeth with 8 proximal surfaces were obtained by CCD sensor (Kodak RVG 6100 using a size #2). The digital radiographic images and subtraction images from artificial proximal caries were examined and interpreted. In this study, we proposed novel caries detection method which could diagnose the dental proximal caries from single digital radiographic image. Results : In artificial caries activity model, the range of lesional depth was 572-1,374 μm and the range of lesional area was 36.95-138.52mm². The lesional depth and the area were significantly increased with demineralization time (p<0.001). Furthermore, the proximal caries detection using digital subtraction radiography showed high detection rate compared to the proximal caries examination using simple digital radiograph. Conclusion : The results demonstrated that the digital subtraction radiography from single radiographic image of artificial caries was highly efficient in the detection of dental caries compared to the data from simple digital radiograph.
방사선사진의 인덱스-순서 분석을 통한 치아경조직의 탈염화 검출
박동현,박영호,김경숙,박정훈,이기자,최삼진,최용석,황의환,박헌국 대한구강악안면방사선학회 2009 Imaging Science in Dentistry Vol.39 No.2
Purpose : The purpose of this study was to develop the radiographic technique for detecting the demineralization which is known as indication of dental caries. Materials and Methods : This technique was based on the comparing of multiple radiographs which was irradiated by multiple X-ray spectra. For the meaningful comparing, the multiple radiographs were reconstructed to the dosimetrically consistent images using a standard material. The difference of resulting images of same target with multiple spectra represents the difference of response of material as regards the spectra. Results : We have found about 10% of demineralization of dental hard tissues particularly in the proximal region through the analyzing of differences. Conclusion : Most intriguing thing in this investigation was that the method to analyze difference shows us to an anatomic structure of dental hard tissues even if absolute values of optical density were excluded during the procedures.
국소 광적응 기능을 가지는 윤곽검출용 32×32 방사형 CMOS 시각칩의 설계 및 제조
박대식,박종호,김경문,이수경,김현수,김정환,이민호,신장규 한국센서학회 2002 센서학회지 Vol.11 No.2
국소 광적응 기능을 가지는 윤곽검출용 시각칩을 픽셀수 32x32의 방사형 구조로 CMOS 공정기술을 이용하여 설계 및 제조하였다. 생체의 망막은 넓은 범위의 입력 광강도에 대해서 물체의 윤곽을 검출할 수 있다. 본 연구에서는 시세포, 수평세포, 쌍극세포로 이루어진 망막의 윤곽검출 기능을 모델링하여 윤곽검출용 인공시각칩을 설계하였다. 국소 광적응을 위해, 입력 광강도에 따라 수용야의 크기를 국소적으로 바뀌게 하였다. 아울러 단위셀을 방사형으로 배치함으로써 영상데이터의 양을 감소시킴과 동시에 칩의 중심부분으로 갈수록 해상도가 높아지도록 설계하였다. 설계된 칩은 0.6 ㎛ double-poly triple-metal 표준 CMOS 공정기술을 이용하여 제조되었으며. HSPICE 시뮬레이션으로 성능을 최적화 시켰다. A 32x32 pixels foveated (linear-polar) stucture retina chip with the function of local-light adaptation for edge detection has been designed and fabricated using CMOS technology. Human retina can detect a wide range of light intensity. In this study, we use the biologically-inspired visual signal processing mechanism that consists of photoreceptors, horizontal cells, and bipolar cells in order to implement the function of edge detection in the retina chip. For a local-light adaptive function, the size of receptive field is changed locally according to the input light intensity. The spatial distribution of sensing pixels in the foveated retina chip has the advantages of selective reduction of image data and good resolution in central part to carry out the elaborate image processing with still enough resolution in the outer parts. The designed chip has been fabricated using standard 0.6 ㎛ double-poly triple-metal CMOS technology and optimized using HSPICE simulator.
Accuracy on the Edge Detection of Topography for Digital Map Manufacture
Park, Woon-Yong,Song, Youn-Kyung,Bae, Kyung-Ho,Kim, Yong-Suk 東亞大學校 建設技術硏究所 2005 硏究論文集 Vol.28 No.2
Currently, digital maps in the metropolitan area are supposed to be revised and renewed every two years, but it is difficulty for the renewal of current information to keep pace with the quickly changing society and so, one of the alternative methods being discussed is a digital map produced using high resolution satellites. The biggest problem in the production of digital maps using high resolution satellite images is the difficulty of production in vector resource format through edge detection of satellite images, a Raster data. In this study, topographical boundaries were detected through edge detection of the satellite image, and after vectorliezing using the screen digitizing method, the results were evaluated and compared to the digital map from the NGII(National Geographic Information Institute) for accuracy.
박선명(Park Sun-Myung),박선경(Park Sun-Kyung),김주현(Kim Joo-Hyun),김종하(Kim Jong-Ha),이정호(Lee Jung-Ho),최무혁(Choi Moo-Hyuck) 대한건축학회 2010 대한건축학회논문집 Vol.26 No.11
In this study, to set up landscaping plans, characteristics of landscape were extracted based on opportunity and weaknesses factors of landscape after carrying out a questionnaire targeting officers in 23 cities and counties in Kyung-buk province and the findings are as following. First, in analyzing condition, component and value of landscape based on opportunity and weaknesses factors, for opportunity factors, it was found that the condition of landscape was quantitatively great, the component of landscape was industrially great and the value of landscape was great in possibility of development. Also, for weaknesses factors, the 'quality' was superior in its condition, the industry was superior in its 'component' and the shortage of artificial resources was superior in its 'value'. Secondly, in the relation between factors consisting opportunity and weaknesses resources, firstly, it was found that industry, city and nature are superior for opportunity factors, and culture, traffic and population are superior for weaknesses factors. Next, in the relation between component and condition, 'qualitatively superior industry' and 'quantitatively superior industry' had the highest frequencies in opportunity factors and 'qualitatively outstanding city' and 'quantitatively preponderant industry' had the highest frequencies in weaknesses factors. Thirdly, in analyzing the importance of opportunity and weaknesses factors, for opportunity factors, qualitatively superior resource was a priority in the importance of condition and for weaknesses factors, it was qualitatively little greater than the quantity. In the importance of component, the industry was most superior in both of strength and weak points and in the importance of value, the shortage of artificial resources was a priority. Fourthly, in characteristics of landscape, internal characteristics were found stronger than external characteristics in each city and county. This means that there are more resources to strategize in landscape plans of individual city and county unit than other in metropolitan unit. Also, possibility of development, possession of complex resources and geographical adjoin were common points of their strategies and plans.
3차원 전산화단층촬영 영상을 이용한 안면 연조직 두께 계측의 임상적 유용성
정호걸,김기덕,한승호,허경석,이제범,박혁,최성호,김종관,박창서 대한구강악안면방사선학회 2006 Imaging Science in Dentistry Vol.36 No.2
Purpose : To evaluate clinical usefulness of facial soft tissue thickness measurement using 3D computed tomographic images. Materials and Methods : One cadaver that had sound facial soft tissues was chosen for the study. The cadaver was scanned with a Helical CT under following scanning protocols about slice thickness and table speed; 3 mm and 3 mm/sec, 5 mm and 5 mm/sec, 7 mm and 7 mm/sec. The acquired data were reconstructed 1.5, 2.5, 3.5 mm reconstruction interval respectively and the images were transferred to a personal computer. Using a program developed to measure facial soft tissue thickness in 3D image, the facial soft tissue thickness was measured. After the ten-time repeation of the measurement for ten times, repeated measure analysis of variance (ANOVA) was adopted to compare and analyze the measurements using the three scanning protocols. Comparison according to the areas was analyzed by Mann-Whitney test. Results : There were no statistically significant intraobserver differences in the measurements of the facial soft tissue thickness using the three scanning protocols (p>0.05). There were no statistically significant differences between measurements in the 3 mm slice thickness and those in the 5 mm, 7 mm slice thickness (p>0.05). There were statistical differences in the 14 of the total 30 measured points in the 5 mm slice thickness and 22 in the 7mm slice thickness. Conclusion : The facial soft tissue thickness measurement using 3D images of 7 mm slice thickness is acceptable clinically, but those of 5 mm slice thickness is recommended for the more accurate measurement.
남매에서 발생한 심한 용혈성 빈혈과 간경변증을 동반한 Wilson 병 2례
노영일,박동호,서우철,문경래,박상기,박영봉,이미숙,전호종 조선대학교 1995 The Medical Journal of Chosun University Vol.20 No.1
We experienced two case of Wilson's disease in female and male sibling. The first case was a 10 year-old female who showed jaundice. pancytopenia and cirrhotic change in liver biopsy. She died 10 days after diagnosis. The second case of 7 year-old male showed specific symptoms and revealed increased AST/ALT, low serun copper level and increased 24 hour urinary copper excretion level He is being treated with D-penicillamine and follow up examinations.