捻轉法이 竝行된 鍼刺戟 및 電鍼刺戟이 鎭痛效果에 미치는 影響

Park, Dong-Seok,Kim, Ji-Hoon,Min, Byung-Il,Oh, Soo-Myung 경희대학교 동서의학연구소 1999 INTERNATIONAL SYMPOSIUM ON EAST-WEST MEDICINE Vol.1999 No.1

Dong-Seok Park¹, Ji-Hoon Kim¹ and Byung-Il Min, Soo-Myung Oh,³¹Department of Acupuncture and Moxibustion, College of Medicine, ²Department of Physiology, College of Medicine, And ³East-West Medical Research Institute, Kyung Hee University,Seoul, Korea. Analgesic Effect of Manual Acupuncture and Electroacupuncture combined with Twirling Method. Proceeding of International Symposium on East-West Medicine Seoul. 187-200, 1999.-Twirling the needle (TN) is one of several needing methods frequently used for acupuncture in the oriental medicine. The present study was conducted to see if TN enhanced the antinociceptive effect produced by plain-or electroacupuncture in the rat tail flick test. Rats (Sprague-Dawley, 200-300g)lightly anesthetized with thiopental sodium(40mg/kg, i.p.) were used in the tail-flick test. The basal reaction time for tail-flick was 2 sec. For "plain" acupuncture(PA), a needle was inserted for 20 min into a Chock-samni (ST36) acupuncture point which (is located at the anterior tibial muscle and about 10mm below the knee joint). For electroacupuncture(EA), train-pulses(3 Hz,0.3-ms pulse width, 0.2-0.3mA) were applied to the inserted needle for the period of insertion. For combining TN with either PA or EA, TN was performed during the each acupuncture period. Two methods for TN were used; twirling 3 times for 1 second persisted for 1 min in every 5 mins(long-duration and long-interval;LDLI) and twirling 3 times for 1 second persisted for 10 sec in every 1 min(short-duration and short-interval;SDSI). PA and EA produced an increase in tail flick latency (TFL); peak increases were 21.3±5.1% and 42.1±17.3% of the pre-acupunture control, respectively, and occurred immediately after cessation of 20min-acupuncture. Performing TN combined with PA increased TFL more than PA itself by showing a greater peak increase in TFL when performed with a SDSI-TN than with a LDLI-TN(60.6±12.5% and 42.7±22.7% of the pre-acupuncture control, respectively). Performing TN combined with EA also increased TFL more than EA itself and a greater peak increase in TFL was observed with a SDSI-TN as compared to a LDLI-TN(77.5±13.8% and 67.3±14.0% of the pre-acupuncture control, respectively). These results indicate that TN enhances both PA-and EA-produced antinociception where an greater enhanced antinociception than a LDLI-TN. It is suggested that performing a SDSI-TN combined with EA seems to be one of the most effective ways to produce analgesia.

대장내시경검사의 전처치로서 항콜린제 사용에 관한 연구 : 전향적, 이중맹검법으로

박경남,한동수,이민호,최호순,박준용,손주현,이오영,함준수,전용철,송승찬,기춘석,윤병철,이종희 대한소화기내시경학회 1997 Clinical Endoscopy Vol.17 No.3

Background: Use of antispasmodic medication prior to colonoscopy is controversial but someone believes antispasmodic may improve visualization of colonic mucosa and ease colonoscope insertion. So, we designed a study to assess the effect of premedication with the antispasmodic, hyoscine-N-butyl bromide(Buscopan') on the performance of colonoscopy. Methods: This study was prospective, double blinded, randomized, controlled study, One hundred three consecutive patients were randomized to receive intravenous buscopan lml(n=52) or placebo(n=51) combined with our standard initial medication(me- peridine 50 mg and midazolam 2 mg). Insertion of colonoscopy was timed, and 100 mm visual analogue scales (VAS) were used for asscssing difficulty of procedure, colonic motility, frequency of positional change, frequency of external compression, difficulty of assistance and degree of discomfort experienced by the patients. Results: There were no significant differences of intubation time between buscopan group(mean time, 7.23 min., range 2~15) and placebo group(7.07 min., range 3-25), (p=0.83) and withdrawal time between buscopan group (6.46 min., range 2-22) and placebo group(6.76 min., range 2 25), (p=0.69). Also, there was no significant differences in intubation time between males and females(buscopan; males 7.00 min., females 7.60 min., p=0.34, placebo; males 7.0~5 min., females 7.08 min., p 0.44). The VAS scores checked by endoscopist(p=0.29), assistant(p=0.32) and patient (p=0.15) were not significantly different in both groups. There were no significant differences in intubation time, VAS scores nf endoscopist, assistant, and patients. Conclusion: Premedication with intravenous bu.opan has no advantage on colonoscopy procedure. Use of antispasmodic medication prior to colonoscopy was not considered as recommendable agent.

12M의 고해상도 360° 카메라를 사용한 주차장의 14면 주차 상태 판단 프로그램

이영지(Young-Ji Lee),이희열(Hee-Yeol Lee),고태영(Tae-Young Ko),곽동훈(Dong-Hoon Kwak),김재형(Jae-Hyung Kim),김주호(Joo-Ho Kim),오승진,이태윤(Tae-Yoon Lee),박상민(Sang-Min Park),이승호(Seung-Ho Lee) 대한전자공학회 2019 대한전자공학회 학술대회 Vol.2019 No.6

In this paper, we propose a program to identify 14 parking status in a parking lot using a high resolution 360° camera of 12M. The proposed program consists of three steps: Match with plane image, parking area detection algorithm, and discrimination of parking using learning method. Tests on a model car to evaluate the program to identify 14 parking status in a parking lot using a high-resolution 360° camera of 12M showed 100% accuracy for both parking and double parking. Therefore, the effectiveness of a program to identify 14 parking status in a parking lot using a high-resolution 360° camera of 12M proposed in this paper has been proved.

태연혈(太淵穴)의 유침 시간에 따른 체온 변화 -적외선체열촬영(赤外線體熱撮影)을 중심으로-

이봉효 ( Bong Hyo Lee ),이경민 ( Kyung Min Lee ),박지하 ( Ji Ha Park ),김민서 ( Min Seo Kim ),김산들 ( San Deul Kim ),박병규 ( Byeong Gyu Park ),양현동 ( Hyun Dong Yang ),예성호 ( Sung Ho Yea ),이호정 ( Ho Jung Lee ),최재원 ( Jae 경락경혈학회 2012 Korean Journal of Acupuncture Vol.29 No.2

Objectives: This study was performed to find the desirable remaining time of needle in the acupuncture treatment. Methods: The 21 volunteers were given acupuncture at LU9 vertically and needles were remained for 2 min, 10 min, 15 min, 30 min, respectively. The thermographic change induced by acupuncture was measured with Digital Infrared Thermographic Image at the following acupoints: LU11, LU10, LU9, LU8, LU5, LU1, and PC7. The statistical significance of thermographi change was evaluated using paired t-test and post hoc Wilcoxon test. Results: The most significant changes after acupuncture were produced when needles were remained for 10 min or 15 min. LU11, LU5, LU1, and PC7 were the point at which all of the remaining time produced significant change commonly. At LU11, the biggest change was produced when needle was remained for 15 min, while at LU5, LU1, and PC7, the biggest change was produced when needle was remained for 30 min, and the smallest change was produced when needle was remained for 10 min at all of acupoints of LU11, LU5, LU1, and PC7. The unbalance between left side and right was decreased the most largely in 15 min group. Conclusions: The results of this study suggest that the desirable remaining time of acupuncture needle might be 15 min.

가열 조건을 달리한 단호박 페이스트와 검 종류별 단호박 라떼의 품질특성

박보람,김나정,유선미,한귀정,김하윤,한혜민,신동선,신말식,Park, Bo-ram,Kim, Na-Jung,Yoo, Seon-Mi,Han, Gwi Jung,Kim, Ha Yoon,Han, Hye-min,Shin, Dong-Sun,Shin, Malshick 한국식품조리과학회 2015 한국식품조리과학회지 Vol.31 No.3

가열 조건에 따른 단호박 페이스트를 제조하기 위해, 단호박을 15분 간 초벌 증숙한 뒤, 고압가열 처리 0분(A), 10분(B), 20분(C), 40분(D) 실시하여 실험군의 품질특성 을 조사하였다. 그 결과 일반성분의 경우, 대체적으로 고 압가열 처리 유무에 따른 유의적 차이가 관찰되었으며, 고압가열 처리한 B, C, D 실험군의 수분함량, 조단백질, 조섬유가 고압가열 무처리군 A에 비해 감소하였고, 가용성 무질소물은 증가하는 것으로 나타났다. 가열 조건별 단호박 페이스트의 수용성식이섬유는 고압가열 20분 처리군인 C의 측정치가 2.02로 가장 높았으며 무처리군인 A의 1.60 보다 증가하였고, 고압가열 처리 40분의 경우 오히려 감소하는 것으로 나타났다. 색도의 L 값은 고압가열 무처리군인 A가 52.20에서 고압가열 처리 10분, 20분, 40분으로 시간이 증가함에 따라 각각 50.33, 49.46, 48.06으로 감소하였고, a 값과 b 값 또한 유의적인 차이를 보이며 감소하였다. 현미경을 통한 단호박 페이스트의 현탁액 입자를 관찰한 결과 카로티노이드를 포함하는 유세포가 관찰되었으며 고압가열 처리와 그 시간이 증가함에 따라 단호박 유세포의 변형이 뚜렷하게 관찰되었으나, 부유안정성 실험 결과 실험군 A, B, C, D 간 차이가 없었다. 이때, 가열조건의 선택은 수용성 식이섬유의 증가, 환원당 증가, 단맛의 관능특성이 유의적으로 높고, 전반적 기호도가 가장 우수한 것으로 나타난 고압가열 처리 20분인 C 실험군으로 결정하였다. 선택된 조건의 단호박 페이스트에 식품가공 시 널리 사용되는 검류인 xanthan gum, locust bean gum, guar gum을 단호박 페이스트에 종류별로 첨가하여 부유안정성을 확인하였는데, 이 결과 guar gum, locust bean gum, xanthan gum 순으로 부유안정성 효과를 나타냈으며 locust bean gum과 xanathan gum은 비슷한 정도의 효과를 보였다. 또한 관능검사를 통한 기호도 확인 결과 텍스쳐와, 전반적인 기호도가 가장 우수했으므로 locust bean gum(0.2%) 첨가 단호박 라떼의 품질이 가장 적절할 것으로 판단된다. For the production of pumpkin paste with respect to heating conditions, we steamed the pumpkin for roughly 15 min, heated it with high pressure treatment for 0 min (A), 10 min (B), 20 min (C), 40 min (D), and subsequently investigated the quality characteristics. Generally a significant difference was observed between the pumpkin paste treated with and without high-pressure heat. The values of water content, crude protein and crude fiber of the high-pressure heat-treated groups B, C, D were decreased compared with untreated group A. The soluble fiber in experimental group B sweet-pumpkin paste treated with high-pressure heat for 20 min was higher than the control, and the highest value at 2.02. Experimental group D sweet-pumpkin paste treated with high-pressure heat for 40 min was found to have a decreased soluble fiber content relative to the control. The L value for the color of the group A untreated control sweet-pumpkin paste (no high-pressure heating) decreased as the time increased from 10 min to 40 min, with L values of 50.33, 49.46, and 48.06, respectively. The b value for the color of the sweet-pumpkin paste also decreased, showing a significant difference. Taking into account all the results, we chose experimental group B in order to prepare sweet-pumpkin latte. We used 0.2% gum (xanthan gum, locust bean gum, guar gum) as a stabilizer. Sweet-pumpkin latte with xanthan and locust bean gum has a suspension stability effect that lasts 90 min. The L and b values of sweet-pumpkin latte with gums increase and a value decrease compared with the control. In terms of the overall acceptance of the sweet-pumpkin latte, the experimental group with xanthan gum scored the best.

가압가열 및 Microwave 처리가 생면의 품질에 미치는 영향

박시우,김꽃봉우리,김민지,강보경,박원민,김보람,박홍민,최정수,최호덕,안동현,Bark, Si-Woo,Kim, Koth-Bong-Woo-Ri,Kim, Min-Ji,Kang, Bo-Kyeong,Pak, Won-Min,Kim, Bo-Ram,Park, Hong-Min,Choi, Jung-Su,Choi, Ho-Duk,Ahn, Dong-Hyun 한국식품영양학회 2013 韓國食品營養學會誌 Vol.26 No.4

중력분을 이용하여 제면한 후 가압가열, microwave 및 가압가열과 microwave 병행 처리한 후, 생면 및 삶은 면의 품질에 미치는 영향에 대하여 알아보았다. 생면의 pH는 microwave 1 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았으며, 수분 함량은 autoclave 50 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았고, 그 외의 처리구에서는 모두 수분 함량이 감소함을 확인하였다. 면의 색도 측정 결과는 명도는 무처리구에 비해 모든 처리구에서 감소하였으며, 적색도는 microwave 1 min 처리구는 감소한 반면, 나머지 처리구는 증가하였다. 황색도는 autoclave 50 min 처리구와 autoclave 50 min/microwave 1 min 병행 처리구에서 증가한 반면, 나머지 물리적 처리구에서는 감소하였다. 삶은 면의 색도에서는 명도, 적색도, 황색도 모두에서 무처리구에 비하여 물리적 처리구에서 증가한 값을 나타내었다. 물성 측정 결과는 경도, 부착성, 응집성, 검성, 복원성에서 무처리구와 비교시 microwave 1 min 처리구는 유의적으로 감소하였으며, 그 외 처리구에서는 유의적으로 증가한 값을 나타내었다. 탄력성과 전단력은 모든 처리구에서 유의적으로 증가하였으며, 인장력은 가압가열 30 min 처리구와 무처리구가 유의적인 차이를 보이지 않았으나, 나머지 물리적 처리구에서는 유의적으로 증가하였다. 관능 평가 결과는 생면의 경우 색 항목에서 물리적 처리구들이 유의적으로 낮은 점수를 받았다. 맛, 질감, 향 항목에서는 무처리구와 물리적 처리구간 유의적 차이를 보이지 않았다. 전체적인 기호도에서는 microwave 1 min 처리구가 가장 높은 점수를 얻었으며, 가압가열(50 min)과 microwave(1 min) 병행 처리구는 무처리구와 비슷한 점수를 얻었다. 따라서 제면 후 가압가열 및 microwave 처리가 생면 및 삶은 면에 있어서 색과 질감 항목을 보완, 개선시킨다면 알러겐성이 저감화된 면을 제품화하는데 적합할 것으로 사료되어진다. This study was conducted to determine the effects of physical treatments for quality of wet noodles. Noodles were being tried with a microwave (for 1 min), an autoclave (for 30 or 50 min), and both autoclave and microwave (for 30/1 min or 50/1 min). The results showed that the pH levels were slightly decreased after treatments of autoclave and autoclave/microwave. The moisture contents were considerably decreased as compared to the control except autoclave (50 min). After all treatments, the lightness was decreased in all samples, but, redness was increased (except microwave) and the yellowness was increased after autoclave (50 min) and autoclave/microwave (50/1 min). Texture was increased as compared to the control except microwave. In the sensory evaluation, the noodles treated with microwave, autoclave (50 min), and autoclave/ microwave (50/1 min) showed a high score in overall preference. From these results, both the autoclave and microwave methods can be applied to the wet noodles without diminishing its quality to a great extent.

Layer-controlled thinning of black phosphorus by an Ar ion beam

Park, Jin Woo,Jang, Sung Kyu,Kang, Dong Ho,Kim, Doo San,Jeon, Min Hwan,Lee, Won Oh,Kim, Ki Seok,Lee, Sung Joo,Park, Jin-Hong,Kim, Kyong Nam,Yeom, Geun Young Royal Society of Chemistry 2017 Journal of Materials Chemistry C Vol.5 No.41

<▼1><P>BP thinning was carried out using a monoenergetic Ar<SUP>+</SUP> ion beam and the BP could be thinned without damaging the surface.</P></▼1><▼2><P>Black phosphorus (BP) is one of the most interesting two-dimensional (2D) layered materials due to its unique properties, including a band gap energy change from 0.3 eV (bulk) to 2.0 eV (monolayer) depending on the number of BP layers, for application in nanoelectronic devices. In general, 2D layered materials including BP have limitations in terms of synthesis due to the process factors such as time, temperature, <I>etc.</I>, and thus, a thinning technique from the bulk material to a 2D material needs to be used while controlling the removed layer thickness. In this study, layer-controlled thinning of BP was performed by using a controlled Ar<SUP>+</SUP> ion beam method and the BP thinning characteristics were investigated. By using the near monoenergetic ion energy in the range of 45–48 eV, BP could be thinned with the thinning rate of ∼0.55 nm min<SUP>−1</SUP> down to bilayer BP without increasing the surface roughness and without changing the chemical binding states. The BP oxide on the pristine BP could also be successfully removed using the same Ar<SUP>+</SUP> ion beam. 2D BP field-effect transistors (FETs) fabricated with the thinned bilayer–10-layer BPs exhibited electrical characteristics similar to those of pristine BP FETs suggesting no electrical damage on the BP layers thinned by the controlled monoenergetic Ar<SUP>+</SUP> ion beam.</P></▼2>

Improvement of interlaminar properties of carbon fiber‑reinforced epoxy composites using aluminum trihydroxide

Dong‑Jun Kwon,Sung‑Min Park,Il‑Jun Kwon,Joung‑Man Park,Euigyung Jeong 한국탄소학회 2019 Carbon Letters Vol.29 No.2

This study provides an economical and effective method to improve the interlaminar properties of carbon fiber-reinforced polymers (CFRPs) using aluminum trihydroxide (ATH) microparticles. ATH microparticles are cheap and are expected to show good affinity to epoxies in the matrix and sizing agents of the carbon fibers owing to the presence of three hydroxyl groups. In addition, ATH particles are reported to improve the mechanical properties of polymers when used as the reinforcement. In this study, ATH microparticles of various sizes, 1.5, 10, and 20 μm, were used to improve the interlaminar properties of the CFRPs. ATH particles with a size of 1.5 μm improved the tensile properties of the ATH/epoxy resin and did not significantly alter the curing behavior. The interfacial adhesion between the carbon fiber and the epoxy resin was also improved, and the impregnation of the resin mixture remained similar to that of the neat resin, resulting in no significant void and defect formation. Considering the above results, the resulting 1.5 μm ATH-reinforced CFRP showed improved interlaminar properties compared to CFRP without ATH. However, 10 and 20 μm ATH-reinforced CFRPs showed deteriorated interlaminar properties due to the diminished tensile properties of the resin itself and resin impregnation, which resulted in more voids and defects, despite the interfacial adhesion between the fiber and the matrix resin.

Effects of hydrogen plasma treatment on SnO2:F substrates for amorphous Si thin film solar cells

Min-Seung Choi,Young-Ju Lee,Jung-Dae Kwon,Yongsoo Jeong,Ju-Yun Park,강용철,Pung Keun Song,Dong-Ho Kim 한국물리학회 2013 Current Applied Physics Vol.13 No.8

We investigated the effects of hydrogen plasma treatment on the physical and electrical properties of fluorine-doped tin oxide (FTO) films used for amorphous silicon (a-Si) thin film solar cells. A slight increase in carrier concentration by the hydrogen doping effect was observed for the FTO film exposed to the hydrogen plasma for 5 min. For further exposure to the plasma, the chemical reduction became prominent and resulted in deterioration of the electrical and optical properties of the film. XPS analysis revealed that the chemical reduction of SnO2 to Sn metallic state occurs on the surface region. It was found that the defects formed by hydrogen plasma act as recombination centers at the interface between FTO electrode and p-layer of a-Si solar cells. This phenomenon resulted in the deterioration of the cell performance. The averaged conversion efficiency (6.82%) of the cells on pristine FTO hydrogen substrate was decreased to 5.81% for the cells on FTO treated for 5 min, which is mainly attributed to the decrease in short-circuit current density.

염전법이 병행된 침자극 및 전침자극이 진통효과에 미치는 영향

朴東錫,閔炳一,盧植,金志勳 WHO COLLABORATING CENTRE FOR TRADITIONAL MEDICINE 1998 東西醫學硏究所 論文集 Vol.1998 No.-

Twirling the needle (TN) is one of several needling methods frequently used for acupuncture in the oriental medicine. The present study was conducted to see if TN enhanced the antinociceptive effect produced by plainor electroacupuncture in the rat tail flick test. Rats (Sprague-Dawley, 200~300g) lightly anesthetized with thiopental sodium (40mg/kg, i.p.) were used in the tail-flick test. The basal reaction time for tail-flick was 2 sec. For "plain" acupuncture (PA), a needle was inserted for 20 min into a Chock-samni(ST36) acupuncture point which (is located at the anterior tibial muscle and about 10mm below the knee joint). For electroacupuncture (EA), train-pulses (3Hz, 0.3ms pulse width, 0.2!0.3mA) were applied to the inserted needle for the period of insertion. For combining TN with either PA or EA, TN was performed during the each acupuncture period. Two methods for TN were used; twirling 3 times for 1 second persisted for 1 min in every 5 mins (long-duration and long-interval; LDLI)and twirling 3 times for 1 second persisted for 10 sec in every 1 min (short-duration and short-interval; SDSI). PA and EA produced an increase in tail flick latency (TFL); peak increases were 21.3??5.1% and 42.1??17.3% of the pre-acupunture control, respectively, and occurred immediately after cessation of 20 min-acupuncture. Performing TN combined with PA increased TFL more than PA itself by showing a greater peak increase in TFL when performed with a SDSI-TN than with a LDLI-TN (60.6??12.5% and 42.7??22.7% of the pre-acupuncture control, respectively). Performing TN combined with EA also increased TFL more than EA itself and a greater peak increase in TFL was observed with a SDSI-TN as compared to a LDLI-TN (77.5??13.8% and 67.3??14.0% of the pre-acupuncture control, respectively). These results indicate that TN enhances both PA-and EA-produced antinociception where an enhanced antinociception than a LDLI-TN. It is suggested that performing a SDSI-TN combined with EA seems to be one of the most effective ways to produce analgesia.