아임계수 추출에 의한 홍삼 추출물의 진세노사이드 조성 및 이화학적 특성

이주미(Joo-Mi Lee),고민정(Min-Jung Ko),정명수(Myong-Soo Chung) 한국식품과학회 2015 한국식품과학회지 Vol.47 No.6

홍삼의 신규 추출 방법으로 아임계수 추출(subcritical water extraction, SWE)을 적용하여 홍삼 추출물의 이화화적 특성 및 진세노사이드 추출 특성을 조사함으로써 최적 아임계수 추출 조건을 결정하고 기존 추출 방법과 비교함으로써 산업적 이용 효율을 평가하였다. 아임계수 추출에 의한 홍삼 추출물의 당도, 고형분 함량, 색차 및 탁도는 추출 온도가 높아지고 추출 시간이 길어질수록 증가하였고 pH는 낮아졌으며, 조 사포닌은 120℃, 20분에서 최대였다. TLC 및 HPLC 분석 결과, 총 및 극성 진세노사이드 농도는 120℃, 20분에서 최대였고 홍삼 특유의 저극성 진세노사이드 Rg3, Rh1 등은 150℃, 15분에서 최대 농도였다. 또한 최적 아임계수 추출과 열수, 에탄올 및 메탄올을 용매로 환류 냉각 추출하여 비교한 결과, 저극성 진세노사이드의 추출 이행률은 150℃, 15분의 아임계수 추출에서 가장 높았고 특히 Rg3는 3.5-5배, Rh1은 2-2.5배의 높은 농도로 나타났다. 홍삼의 특이 사포닌으로 극미량 존재하는 Rg3 및 Rh1은 강력한 항암 효과 등이 보고되면서 최근 화학적, 물리적, 생물학적 방법에 의한 전환 연구가 활발히 진행되고 있으나 낮은 선택성과 생산성의 저하, 부 반응으로 인한 환경 공해 및 대량 생산의 한계 등으로 산업적 적용에 제약이 존재하여 왔다. 본 연구에서는 아임계 상태에서의 물의 특성 변화를 이용한 아임계수 추출을 적용하여 홍삼으로부터 특히 저극성 진세노사이드의 선택적 추출 및 전환에 효과적인 대체 기술로서 가능성을 확인하였다. Red ginseng was treated by subcritical water extraction (SWE) whose two parameters were the extraction temperature (105-150℃) and time (5-20 min) under a high pressure. The oBrix value, solid content, color difference, and turbidity of the red ginseng extract increased with increasing extraction time and temperature, while the pH decreased. The total concentration of ginsenosides in the red ginseng extract was maximal at 120℃ and 20 min. The concentrations of ginsenosides Rg3 and Rh1 were maximal at 150oC and 15 min. The concentrations of Rg3 and Rh1 were respectively 3.5- 5 times and 2-2.5 times higher than those treated by conventional extraction methods with hot water, ethanol, and methanol. SWE is a particularly effective method for the selective extraction of less-polar ginsenosides such as Rg3 which is well known to exert strong anticancer effects.

고온 초전도체의 국부�치 에너지에 따른 온도분포 해석

주민석,배준한,고태국,강연일 연세대학교 산업기술연구소 1994 논문집 Vol.26 No.1

The transient one-dimensional heat conduction equation in a high Tc bulk superconductor with an localized hot zone has been analyzed numerically. After the heater energy is introduced in a few miliseconds, the development of the normal zone and full quench time are calculated with respect to distance as a fuction of three parameters including : transport current, heater current, heating time. The analysis of this model is performed using finite difference method under modified adiabatic condition. The results of computer simulation are also presented in this paper. Full quench occurs when transport currents exceed 1.15[A] in given heater current and heating time. A temperature of superconductor rises abruptly in heating region when heater energy is increased. If heater energy is same, heating time is dominant factor for quench. Given heater energy, ohmic heat dissipation is dominant part for quench. But, heating energy is dominant part for quench than conduction. When heater energy is large, quench is not affected by transport currents.

호흡율 측정기를 이용한 폐수의 외부탄소원 이용가능성 평가

최은희,고주형,임정훈,부경민,김창원 부산대학교 환경문제연구소 2000 環境硏究報 Vol.18 No.-

In this research, we measured Readily Biodegradable COD(Ss) using respiration meter which measured OUR and calculated respiration rate due to calculate organic matter portion of external carbon sources because known organic matter analysis methods i.e. COD, BOD did not measure amount of organic matter which was used in denitrification. Based on the experimental results, leather wastewater had 40.3% Ss in TCOD and food fermentation liquid, alcoholic wastewater and petrochemical wastewater was 38%, 38% and 28.3% respectively. However in case of considering of flowrate and concentration, flood fermentation and alcoholic wastewater was revealed that they were effective external carbon sources

초전도 코일의 �치 시뮬레이션 해석

배준한,주민석,고태국 연세대학교 대학원 1994 延世論叢 Vol.30 No.1

This thesis is a study on the quench characteristics in epoxy impregnated superconducting magnet. Teh normal 3one propagation velocity, full quench time and full recovery time in a superconducting magnet during quench are simulated numerically. Propagation velocity is linearly proportional to the transport current and abruptly increases near the critical current. Longitudinal velocity is nearly 20 times of transverse velocity regardless of the transport current. The ratio of the transverse velocity to longitudinal velocity is about 0.04 regardless of the transport current and the full quench time is abruptly decreased near the minimum propagation current. Comparing superconducting composites composed of Cu matrix to the composites of Cu/CuNi matrix, the propagation velocity of the former is slower than the latter, while the full quench time of the former is longer under the same transport curent.

편측안면경련의 미세혈관 감압술시 안면근전도의 수술중 감시 : 임상연구 Clinical Research

이강운,고원일,최영근,박주현,백민우,강준기 대한신경외과학회 1997 Journal of Korean neurosurgical society Vol.26 No.9

PADS를 이용한 전자 청진 시스템 설계

한철규,고성택,최민주 濟州大學校 情報通信硏究所 2000 情報通信硏究所論文集 Vol.3 No.-

Heart sound contains rich information regarding the dynamics of the heart and the auscultation has been a first choice of routine procedures for diagnosis of the heart. However. heart sounds captured using a conventional stethoscope are not often loud or clear enough for doctors to precisely classify their characteristics. especially. under the noisy environments of the hospital. A simple auscultation device that removed shortcomings of the conventional stethoscope was constructed in the study. The device employed a polymer based adherent differential output sensor(PADS) which was on contact with skin through a coupling medium and appropriated electronic circuits for signal amplification and conditioning. An ordinary headphone is taken to hear the captured heart sounds and the volume can be adjusted to hear well. It is also possible that the device sends the captured heart sound signals to a PC where the signals are further processed and visualized.

임플란트 hexagon 높이에 따른 임플란트와 주위 조직의 응력분포 평가

박성재,김주현,김소연,윤미정,고석민,허중보 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1

PURPOSE. To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. MATERIALS AND METHODS. Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ∅4.0 mm×11.5 mm OsstemUSII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture’s external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group’s implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. RESULTS. The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2 mm, there was no significant influence on the stress distribution. CONCLUSION. For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed. 연구 목적: 본 연구는 hexagon 높이에 따른 임플란트 각 부위와 주위 지지조직의 응력분포를 3차원 유한요소 해석을 통해 평가하여 hexagon 높이가 기계적 안정성에 미치는 영향을 평가하고자 시행되었다. 연구 재료 및 방법: 외측 연결 형태의∅L4.0 mm×11.5 mm USII (Osstem Co., Pusan, Korea) 임플란트 시스템을 이용하여 하악 제 1대구치 부위에 임플란트를 식립하여 보철 수복한 경우를 연구 모델로 가정하고 임플란트 고정체의 외측 연결부인 hexagon의 높이를 각각 0.0 mm, 0.7 mm, 1.2 mm, 1.5 mm로 적용한 CAD data를 유한요소 모형화하였다. ABAQUS 6.4 (ABAQUS Inc., Providence, RI, USA)를 이용하여 산출된 응력 값 중에서 등가응력을 기준으로 각 요소(상부 치관, 지대주 나사, 고정체, 치밀골, 해면골)에서 나타나는 최대 응력 값을 비교 하였다. 결과:외측 연결을 갖는 임플란트의 hexagon의 높이는 고정체, 지대주 나사, 상부 보철물 그리고 주위 지지골에 대해 응력 분산에 영향을 주었다. Hexagon의 높이가 증가할 수록 임플란트의 응력 분산은 더 잘 이루어졌으며, 최대 응력 값의 감소를 보였다. Hexagon의 높이가 1.2 mm 이상이 되면 응력 분포에 더 이상 크게 기여하지 않았다. 결론: 외측연결을 갖는 임플란트에서 hexagon은 응력 분산에 필수적인 요소이며 그 높이가 증가할수록 더욱 효과적인 응력의 분산이 나타났다.

H9c2 심근 세포주에서 외인성 nitric oxide가 허혈에 의한 세포 독성에 미치는 영향

정성구,장현용,김명천,고영관,정주호,배영미,박원서,김대중,유영민,김성수,임성빈 대한응급의학회 2001 대한응급의학회지 Vol.12 No.4

Background: Nitric oxide(NO) is known to have protective effects on an ischemic heart and to exert triggering effects on ischemic preconditioning. However, the effects of NO during the ischemic period have not been investigated. To investigate the role of exogenous nitric oxide in a model of ischemic heart cell death, we studied the effects of ischemic preconditioning and ischemia in a normal and an ischemic buffer. Methods: Rat cardiac myoblast cells(H9c2) were cultured in a normal and an ischemic buffered medium. For the ischemic culture of heart cells, the cells were cultured in a dessicator with GasPak for 5 hrs. In ischemic preconditioning, the cells were pretreated with ischemic buffer for 5 min and then perfused with normal medium for 30 min. For the measurement of the cytotoxicity, a MTT(3-4-Sdimethylthiazol-2-yl-2,5-diphenyl tetrazolium bromide) assay was performed. A DAPI(4',6-diamidino-2-phenylindole dihydrochloride) staining procedure and a flow cytometry analysis were performed to confirm apoptotic cell death by ischemia. Results: Cell viability, as determined by using a MTT assay, showed that the preconditioned group treated with NO showed more cell death than with the not-preconditioned groups in both normal and ischemic buffers. But, In normal medium and not-preconditioned groups, NO showed protective effect according to the concentrations(100,1000μM) . No treatment with NO produced the different results. In normal medium, the protective effect of ischemic preconditioning was demonstrated, but no protective effect of ischemic preconditioning could be seen in the case of the ischemic buffer. The DAPI staining and flow cytometry analysis of heart cells showed characteristic apoptotic features. Conclusion: NO added in the ischemic phase had deterious effects on heart cells. Ischemic preconditioning was more harmful than ischemia alone. The toxicity of the cells was characteristic apoptosis.

2003년 국내 중증급성호흡기증후군 진료 현황 및 문제점 분석

이진수,김은실,정문현,백제중,정선화,안주희,최영화,이선희,고철우,김성범,김민자,박승철,기현균,송재훈,최상호,김양수,이상오,조용균,박영훈,정숙인,김연숙,이흥범,손창희,장성희,정희진,김우주 대한감염학회 2004 감염과 화학요법 Vol.36 No.3

목적 : 2002년 말 중국에서 SARS가 발생한 이후 국내에서도 2003년 10월까지 총 3명의 추정환자, 17명의 의심환자가 보고되었다. 향후 추가적인 SARS의 유행이 우려되는 상황에서, 그간의 SARS 환자 진료에 있어서의 실질적인 준비사항, 진료 현황 등에 대한 조사를 통해 문제점을 파악하여, 향후 더 나은 대비가 될 수 있도록 개선점을 제시하고자 하였다. 재료 및 방법 : SARS로 의심되는 환자를 진료 경험이 있는 병원의료진을 대상으로 2003년 10월에 설문조사를 실시하였다. 설문에는 SARS 환자 진료 시의 실질적인 조치, 진료 현황, 병실, 응급실 및 외래에서의 격리 시설과 준비사항, 보건당국의 관리와 지원에 관한 사항을 포함하였다. 결과 : 대상이 되는 22개 병원 중 17개(17/22, 77.2%) 병원이 설문에 응하였다. SARS 환자를 위한 격리실은 응급실, 외래, 일반병실 및 중환자실에서 각각 9개(9/17, 52.9%), 5개(5/17, 29.4%), 15개(15/16, 93.7%), 4개(4/16, 25%) 병원에서 음압처리가 되어있지 않은 일인실 혹은 다인실이 사용되었고, 1개(1/16, 6.3%) 병원에서만 일반병실에서 음압격리실이 운영되었다. 입원환자의 진찰 시 개인보호구의 착용은 거의 모든 의료기관에서 이루어졌다. 보건당국에서 SARS지정병원의 시설 등을 사전에 확인한 곳은 1곳(1/12, 8.3%)이였고, 14개 병원(14/15, 93.3%)에서는 보건당국에 의뢰한 검사결과를 통하 받지 못하였다. 결론 : 의료기관에서 SARS 환자용 격리실뿐만 아니라 기존의 격리실 설비 등이 미흡하였으며, 특히 중환자실 및 외래의 준비가 더욱 부족하였다. 보건당국의 의료기관에 대한 종합적인 지원이 부족하였고, 병원과의 원활한 연계가 잘 이루어지지 않았다. SARS 만이 아닌 격리를 필요로 하는 질환의 적절한 진료를 위해 향후 병원 시설의 정비와 정부차원에서의 보다 구체적이고 실질적인 대책마련이 필요하다. Background : There was an worldwide outbreak of the Severe Acute Respiratory Syndrome (SARS) originated from China in late 2002. During that period three cases of suspected SARS and 17 cases of probable SARS were reported in Korea. With the concerns about the reemergence of SARS-coV transmission, it is important to be prepared for any possibility. So, this study is aimed to analysis the past measures in managing SARS and propose the amendatory plans to improve the preparedness. Materials & Methods : Questionnaires were collected among clinicians with any experience in managing the probable or suspected SARS cases in Oct. 2003. 17 out of 22 hospitals responded to the questionnaire. The contents in the questionnaire were practical activities, personal equipments, response plans, isolation facilities in emergency centers, outpatient clinics, general wards and intensive care units, and relationship with the public health department. Results : The dedicated isolation rooms in emergency centers, outpatient clinics, general wards, and intensive care units were prepared in 9 (9/17, 52.9%), 5 (5/17, 29.4%), 15 (15/16, 93.7%), and 4 (4/16, 25.0%) hospitals, respectively. Except for one hospital that newly made negative pressure room for SARS, single or multi-bed rooms without airborne infection control were used in all the other hospitals. The personal precaution principles were kept quite well in general wards. Before the designation of SARS hospital by the public health department prior evalution to see if the hospital was suitable for managing SARS was conducted in only 1 (1/12, 8.3%) hospital. The results of laboratory diagnosis were reported back in 1 (1/15, 6.6%) hospital. Conclusions : The isolation facilities which can control airborne infection were almost deficient not only for SARS but also for other respiratory transmissible diseases. For the infection control of transmissible diseases including SARS, more investment is needed on medical facilities and comprehensive support from the public health department required.

Differences in performance on the functional movement screen between chronic low back pain patients and healthy control subjects

Ko, Min-Joo,Noh, Kyung-Hee,Kang, Min-Hyeok,Oh, Jae-Seop The Society of Physical Therapy Science 2016 JOURNAL OF PHYSICAL THERAPY SCIENCE Vol.28 No.7

<P>[Purpose] Differences in scores on the Functional Movement Screen between patients with chronic lower back pain and healthy control subjects were investigated. [Subjects and Methods] In all, 20 chronic lower back pain patients and 20 healthy control subjects were recruited. Chronic lower back pain patients and healthy controls performed the Functional Movement Screen (deep squat, hurdle step, inline lunge, shoulder mobility, active straight leg raise, trunk stability pushup, and rotary stability). The Mann-Whitney test was used to analyze differences in Functional Movement Screen scores between the two groups. [Results] Chronic lower back pain patients scored lower on the Functional Movement Screen total composite compared with healthy control subjects. Chronic lower back pain patients scored lower on Functional Movement Screen subtests including the deep squat, hurdle step, active straight leg raise, and rotary stability tests. [Conclusion] The deep squat, hurdle step, active straight leg raise, and rotary stability tasks of the Functional Movement Screen can be recommended as a functional assessment tools to identify functional deficits in chronic lower back pain patients.</P>