위암환자의 복강내에 투여한 Mitomycin C-Carbon Particle의 Mitomycin 용출에 관한 연구

노승무,조영훈,정경수,오정연,김진향,양준묵,강대영,송규상,조준식,최선웅,이진호,민병무,김용백,김창식,박근성,인현빈,정현용,김학용 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

Locoregional recurrence is the most common type of recurrence in surgical operation of gastric adenocarcinoma, and peritoneal dissemination is one of the most difficult problems in advanced gastric adenocarcinoma treatment. Because the peritoneal cavity is the most common site of the first recurrence after gastric cancer resection, intraperitoneal chemotherpy seems a logical choice for cancer chemotherapy. The Mitomycin C(MMC) adsorbed by the activated charcoal particles(CH) is relatively released when the drug concentration surrounding the carbon particles becomes low in the peritoneum of the peritoneal cavity. For the intraperitoneal chemotherapy on the advanced gastric adenocarcnoma, mitomycin C adsorbed on activated carbon particles was administered in the peritoneal cavity just before abdominal wall closure. The closed drainage tubes were inserted in the peritoneal cavity and clamped for tuo hours after completion of operation. MMC concentrations were serially measured in peritoneal fluid, plasma and urine at 2hour, 48 hour, 72 hour and 168 hour following its administration in order to study the efficacy of the MMC-CH as a drug delivery system. There were minimal toxicities in born marrow, liver, and gastrointestinal system after intraperitoneal MMC-CH administration. The data of this study suggested that MMC-CH may have a somewhat more beneficial effect than surgery alone when administered in optimal dose and schedules, but the MMC concentration of the peritoneal fluid was not sufficient to eradicate remnant cancer cells, and effective duration of maintenance was only below 24 hours in the peritoneal fluid and plasma.

무전해 Ni-Cu-P 폐 도금액의 재사용에 관한 연구(Ⅱ)

오이식,배영한 釜慶大學校 2002 釜慶大學校 論文集 Vol.7 No.-

Reusing of electroless Ni-Cu-P waste solution was investigated in the plating time, plating rate and deposit. It is difficult for initial solution with 55% waste solution additive at batch type to reuse the waste solution. Initial solution with 60% waste solution additive at continuous type is a task of great difficulty to reuse of waste solution. Component change of nickel-copper for electroless deposition was increased by deposited inferiority and with decrease of plating time.

비구조화 환경의 입력영상에 대한 영역기반의 추적 방법

오홍균,손용준,장동식 한국경영과학회 2001 한국경영과학회 학술대회논문집 Vol.- No.1(3)

The main problems of computational complexity in object tracking were object definition, identification and segmentation in non-structured environments with erratic movements and object collisions. Therefore, for efficiency, we considered the object information as a region that corresponds to objects without discriminating among objects in the same frame. This paper describes the algorithm that, automatically and efficiently, recognizes and keeps tracks of interest-regions selected by a user in video or camera image sequences. The block-based feature matching method was used for region tracking. This matching process considers only dominant feature points such as corners , edges, bright and dark spots without requiring a pre-defined model of object s . Experimental results showed that matching process captured correct region successfully even when the objects undergo scaling and 3-dimensional movements in successive image sequences.

상수처리 시스템에서의 막분리 공정의 개발

오중교,이태진,정두식,이용택 경희대학교 환경연구소 1995 環境硏究 論文集 Vol.6 No.-

Membrane filtration process seems to have many advantages such as improvement of drinking water quality, saving water purification chemicals and operation cost, easier operation and maintenance and saving time and cost for construction of a water purification plant. A study was conducted to optimize the use of a membrane process to produce potable water from Lake water in singal, Kyungkido, South Korea. We try to optimize the process by adjusting different pretreatment, various MWCO(Molecular Weig염(salt), alignate와 같은 천연고분자 또는 ht cut-off), hydrauric conditions.

이종접합재 접합 계면근방 균열의 응력 및 파괴특성

오정국,차용훈,오환섭,박준건,박경식 朝鮮大學校 機械技術硏究所 1998 機械技術硏究 Vol.1 No.1

현재까지 이종마찰압접재의 강도측정은 실험 (7)-(15)에 의해 구해져 왔다. 하지만 최근 이종마찰압접재의 효율성을 인정하여 여러 실용 부품에 응용하려는 연구가 한창 진행중이다. 이종마찰압접재에 대한 저자들(1)-(6)의 기초실험결과 일반적인 단종재와는 상이한 파괴거동(3)이 관찰되었고, 파괴역학적인 관점에서 정성적인 data 확보가 필요하게 되었다. 따라서 본 연구에서는 인장시험시 이종마찰압접재의 접합강도와 미소균열들에 의한 파괴거동을 파괴역학적 관점에서 해석적으로 고찰하여 보고자 경계요소법(BEM ; Boundary Element Method)을 이용하여 접합계면을 포함하는 접합부를 중심으로 계면상의 응력분포와 계면의 중앙에 결함이 균열로써 존재하는 경우의 응력분포와 인장시험시 열영향부에서 관찰된 균열의 모델링을 통한 균열선단에서의 응력해석을 행하였고, 그 결과 얻어진 중요한 내용을 요약하면 다음과 같다. 계면의 중앙에 균열이 존재하는 접합계면의 표면부에서 응력의 특이성이 발생하며 탄성계수의 비가 증가할수록 특이성이 증가함이 관찰되었다. 탄성계수의 비가 일정한 경우 균열의 크기가 변화하여도 계면의 표면부에서 발생하는 특이성은 거의 같은 값을 갖게 되며, 탄성계수의 비가 증가할수록 표면부의 응력 특이성의 크기는 증가한다. 이종마찰압접재의 인장시험시 관찰된 균열을 모델링 하여 해석한 결과 최대 응력 기준으로 살펴볼 때 인접한 균열선단에서의 응력분포는 균열을 합체시키는 방향으로 작용함을 알 수 있다. In this study stress distribution on the interface and stress near tip of the sub-interface crack in the dissimilar friction welded material is analyzed by using of BEM( Boundary Element Method). Stress singularity near surface of model to analyze is observed for various crack length and ratio of elastic modulus. Tensile and shear stress distribution near two neithbor sub-interface crack tips are analyzed. Existance of singularity near surface on the interface is particular situation so that we need to investigate for dissimilar friction welded materials by means of numerical analysis method.

만화 과제를 이용한 정신분열병 환자의 사회인지 능력의 측정

오정은,나명현,하태현,신용욱,노규식,홍순범,이경진,신민섭,이영호,권준수 大韓神經精神醫學會 2005 신경정신의학 Vol.44 No.3

Objectives : This study is to investigate the hypothesis that schizophrenic patients have difficulty in inferring mental state of others. Methods : Twenty schizophrenic patients and twenty normal subjects were administered to the Cartoon Task required inferring the character's intention in a given context. Results : The schizophrenic patients showed a statistically significant impairment in the Cartoon Task. Both groups chose the card depicting a frequent everyday action significantly more rather than the similar card to the last picture in each story for wrong answers. Conclusion : These preliminary results suggest that schizophrenia is associated with a specific deficit of the cognitive ability referred to as social cognition, and this deficit can be detected not only in the acute phase as found in previous research studies, but also in remission. Also when subjects fail to appreciate what is going on in the minds of other people, they seem to rely on a socially familiar experience.

동전해정제시 음극분극전위에 미치는 첨가제의 영향에 관한 연구

오기식,유용주,김영홍 울산대학교 1985 연구논문집 Vol.16 No.2

전해첨가제를 동전해액(황산동-황산)에 각각 단독으로 또는 복합적으로 첨가하여 음극분극전위를 측정함으로써 다음과 같은 결론을 얻었다. 1) 첨가량이 많아짐에 따라 아교와 글리신은 음극분극전위를 현저히 높이며, 아비톤-A는 약간 증가시키고, 티오요소는 소량 첨가할 경우 감소시키나 첨가량이 많아지면 상당히 상승시킨다. 그리고 Cl?은 음극분극전위에 영향을 거의 미치지 않는다. 2) 아교를 주 첨가제로하고 티오요소 및 아비톤-A를 첨가했을 때 티오요소와 아비톤-A는 분극전위에 거의 영향을 미치지 못하고 주로 아교가 영향을 미친다. 3) 아교 5mg/l, 티오요소 3mg/1, Cl? 20mg/l를 가한 전해액을 이용한 일반적인 전해정제로 2.5A/dm²의 고전류밀도에서 평활하고 치밀한 전착면을 얻을 수 있었으며, 불순물의 제거가 가능하고 부동태현상이 발생 하지 않았다. Cathodic polarization potentials during the ectrorefining of copper have been measured under various conditions of addition agents in the copper electrolyte (CuSO₄-H₂SO₄). The results obtained are as follows. 1) The cathode polarization potential is affected by the kind of addition agents and the amount of addition to the electrolyte. Glue and glycine show remarkable increasing effects on the polarization potential, Aviton-A has a little effect. However, thiourea causes the polarization potential to increase considerably at high concentration, but showing a decreasing effect at low concentration. Chlorine has little effect on the polarization potential. 2) In the case of using the electrolyte containing glue with Aviton-A and glue with thiourea as additives, thiourea and Aviton-A have little effect on the polarization potential, while glue shows remarkable effect. 3) The electrorefining was carried out successfully using the electrolyte added glue 5mg/l, thiourea 3mg/l, and chlorine 20,g/l, with the current thiourea 3mg/l, and chlorine 20mg/l, with the current density of 2.5A/dm² for 68hrs at the pilot plant. The surface of deposit copper was smooth and its thickness was uniform, showing the purity of 99.99( copper.

용매 변화에 따른 피롤 벤젠아민 유도체의 진동성분 일차 초편극률 변화

오주연,이영식 慶熙大學校 材料科學技術硏究所 1999 材料科學技術硏究論集 Vol.12 No.-

Experimental data are presented and discussed on the vibrational contributions β^(v) to molecular nonlinear optical(NLO) properties of benzene-pyrrole(BP) derivative in various solvents. Using a semi-classical model, the nuclear relaxation contributions is expressed in terms of vibrational spectroscopic observables namely frequencies and spectrum intensities. In this study, β^(v´)s of a BP derivative molecule in various solvents are determined using vibrational spectroscopy. To compensate the solvent contribution, the absolute Raman intensities of DMSO is also determined.

最近 定期船社의 東아시아 地域 寄港 패턴의 變化에 關한 考察

오용식,구경모 한국물류학회 2006 물류학회지 Vol.16 No.1

충남 서북부 산업재해환자 실태조사

오태식,김용배,리갑수,장봉기,이병국 순천향대학교 산업의학연구소 1998 순천향산업의학 Vol.4 No.1

In order to find out the situation of industrial accidents in area of Choongnam northwest and to obtain the basic materials for prevention of industrial accidents, 647 patient who had industrial accident were selected from five general hospital in Chunan Choognam. All industrial accident cases were analysed to draw characteristic patterns in relation to industrial type, time of industrial accident, age, work duration, site of accidents, degree of accidents. The period of this study was from June 1, 1996 to May 31, 1998. The results of the study were as follows. 1. Frequency rates of accident was 42.0% in manufacturing industries, the highest among industries and followed by 21.5% in construction industries, 14.5% in transport, storage & communications industries, 11.1% in other industries, 10.8% in electricity, gas & water supply industries. 3. while the highest frequency rate of accident by month was 24.4% in March and April, the lowest was 9,1% in November and December. 4. Frequency rate of accident by time was 22.7% in 10:00-11:00. the highest among time and followed by 10.7% in 14:00-15:00. 5. The highest frequency rate of accident by age group was 42.7% in older age group(above 40 years old). 6. While the highest frequency rate of accident by site was 30.9% in hands and feet, the lowest was 9.7% in upper limbs. 7. While the highest frequency rate of accident by duration of treatment was 73.49% in below 1 month, the lowest was 0.9% in above 6 months. 8. While the highest frequency rate of accident by duration of work was 59.4% in below 1 year, the lowest was 2.6% in above 10 years.