졸-겔법으로 합성된 폴리이미드/실리카 복합체의 환경적 물성에 관한 연구

박성수,홍성수,이성환,김성완,박재현,김지경,박희찬 한국환경과학회 2003 한국환경과학회지 Vol.12 No.4

Two types of polyimide/silica composite films were prepared using sol-gel method through hydrolysis and polycondensation of tetraethoxsilane(TEOS) with the polyamic acid(PAA) and end-capped PAA solution. Sample were characterized by the means of differential thermogravimetry, X-ray diffractometry, scanning electron microscopy, universal test, impedance analyzer, chemical resistance test, etc. All of the PAA/silanol solutions heat-treated at 300℃ for 6h were transformed to polyimide/silica composites. It has been demonstrated that the properties of polyimide/silica composites were affected by the amount of silica addition and the bond type existed between polyimide and silica.

벼 무논골뿌림裁培時 播種期가 生育 및 收量에 미치는 影響

池在浚,朴裁成,朴成圭,李尙榮,洪性澤,孫錫龍 충북대학교 농업과학기술연구소 1999 農業科學硏究 Vol.16 No.-

This study was carried out to determine the optimum seeding date for the rice(Oryza sativa L.) cultivation of the puddled-soil drill seeding, which is one of the efficient labor saving cultural methods, at the central part of Korea. Namweonbyeo, Anjungbyeo and Ilpumbyeo were seeded on four dates from April 10 to May 25, 1994 with the 15 day interval in the paddy field. In order to examine the adequate seeding date, the growth characters, yield components and yields were investigated. The coleoptile emerged 1 or 2 days earlier in Namweonbyeo than in Anjungbyeo and Ilpumbyeo, and later seeding resulted earlier coleoptile emergence. The number of seedling stands were higher in the order of Namweonbyeo, Anjungbyeo and Ilpumbyeo, was increased at the later seeding and was 81 to 88 seedlings on April 10 seeding. The plant height, number of leaves, number of tillers and dry weight at 50 days after seeding of all three cultivars were higher at later seeding. Leaf area index(LAI) were higher in the order of Ilpumbyeo, Anjungbyeo and Namweonbyeo. LAIs at the heading stage, at 30 days after heading and at 30 days before heading were higher in that order. The dry matter weight at the 30 days before heading was higher in sheath and stem than that in leaf blade, while, at heading stage, it was higher in the order of sheath and stem, leaf blade and panicle. On the other hand, at 30 days after heading, it was higher in the order of panicle, sheath and stem and leaf blade. The number of panicles per m2 was greater in the order of Ilpumbyeo, Anjungbyeo and Namweonbyeo. The ratio of ripened grain was reduced as the later seeding date. Its ratio was higher in Namweonbyeo than in Anjungbyeo and Ilpumbyeo. Yield of Namweonbyeo was lower than those of Anjungbyeo and Ilpumbyeo. Yield was decreased as the seeding date was delayed. Namweonbyeo showed the highest yield at seeding on May 10, while Anjungbyeo and Ilpumbyeo showed at seeding on April 25. The seeding date was negatively correlated with the ratio of ripened grain. while the number of seedling stands was positively correlated with the number of panicle per m2.

벼 乾沓直播栽培時 播種期가 乾物生産에 미치는 影響

朴栽成,朴成圭,李尙榮,洪性澤,池在浚,趙東三,孫錫龍 충북대학교 농업과학기술연구소 1999 農業科學硏究 Vol.16 No.-

This experiment was carried out to obtain indispensable information to establish comprehensive cultural method of rice in direct seeding on dry paddy at Chungbuk Agricultural Research and Extension Services. Effect of seeding date on dry matter production, yield components and yield were studied. Seeding on May 5 ensured the highest maximum number of tillers, while transplanting on May 20 gave the highest rate of effective tillers. Number of effective tillers was greater in the order of Hwajinbyeo, Hwaseongbyeo, Daekwanbyeo. Lengths of upper three leaves were increased at later seeding, but leaf width was not affected by seeding date. Ratio of leaf blade weight was higher in earlier seeding during 30 days before heading but was higher in later seeding during 30 days after seeding, and was higher in the order of Hwajinbyeo, Hwaseongbyeo, Daekwanbyeo. CGR, RGR and NAR were not significantly different among seeding dates during 30 days before heading, but were lower in later seeding during 30 days after seeding. LAR was not affected by seeding date during 30 days before heading, but was higher at seeding on May 5 in heading date and during 30 days after heading. Dry weight of leaf blade, leaf sheath and culm, ear and total biomass during 30 days before heading and heading were highest in May 5 seeding. Daekwanbyeo and Hwaseongbyeo in May 5 seeding and Hwajinbyeo in April 20 seeding brought the highest yield with greater number of spikelets, higher ripening ratio and greater 1,000 grain weight, and harvest index and grain/straw ratio were Increased at earlier seeding. There were significantly positive correlations between number of panicles per m2 and LAI at 30 days before heading and heading, dry matter weight of leaf blade and total mass at heading. On the other hand, there were significantly negative correlations between seeding date and ripened grain ratio. 1,000 grain weight and yield, and between 1,000 grain weight and leaf length of 2nd, respectively.

벼 무논골뿌림栽培時 播種期 및 立毛數가 生育 및 收量에 미치는 影響

洪性澤,朴栽成,朴成圭,李尙榮,池在浚,孫錫龍 충북대학교 농업과학기술연구소 1999 農業科學硏究 Vol.16 No.-

This study was conducted to establish the cultural techniques of the puddled-soil drill seeding of race (Oryza sativa L.), which is one of the efficient labor saving cultural methods, in the central part of Korea. Seoanbyeo was seeded at three times from April 10 to May 20 with the 20 day interval in 1994. The number of seedling stands per m2 at each seeding date were 50, 90, 130 and 170. The tillering characteristics, lodging characters, dry matter production, yield components and yield were investigated. The number of days to the maximum tillering stage was reduced at the later seeding date. It was 70, 55 and 25 days in seedings on April 10, April 30 and May 20, respectively. The critical effective tillering stage was also shortened at the delayed seeding. The higher the number of seedling stands was, the higher number of tillers, the shorter duration to the maximum tillering stage and the earlier critical effective tillering stage were resulted. The number of tillers was higher at the earlier seeding date. The number of tillers was increased in the order of 50, 90, 130 and 170 seedling stands per m2. The ratios of effective tillers were 53, 61 and 63% at seeding on April 10, April 30 and May 20, respectively. The ratios were not significantly different at April 10. But the ratios in seeding on April 30 and May 20 were reduced as the number of seedling stands was increased. The weight of stem base related to lodging was the highest with 2.01g/10 plants in the optimum seeding on April 30, while it was 1.59g/10 plants in the late seeding on May 20. It was also decreased as the number of seedling stands was increased. The dry weights at 30 days before the heading stage were increased at the later seeding, while the dry weight at the heading stage was the highest at seeding on April 30 which is considered as the adequate seeding time. The dry weights at 30 days before the heading stage were increased as the number of seedling stands was increased and they were increased up to 130 seedling stands per m2 at the heading stage. The length of panicle exsertion was shortened at the later seeding. The length of panicle exsertion was increased up to 130 seedling stands. but it was shorter at 170 seedling stands. The heading dates were later at seeding on April 30 and May 20 than at seeding on April 10. They were not remarkedly different among seeding dates at 50 seedling stands, it was earlier at the higher number of seedling stands over 90. The number of spikelets per panicle was decreased at the higher number of seedling stands. The ratio of ripened grains was higher at earlier seeding than at later seeding. It was not significantly different among the number of seedling stands at the same seeding time. Yields at seeding on April 30, April 10 and May 20 were 644, 624 and 551kg/10a, respectively. The seeding on April 30, the optimum seeding time, resulted the highest yield. Rice quality was decreased due to the increase of the green kerneled rice as the seeding date was delayed.

대량의 각혈로 사망한 장티푸스 1예

한상우,유진홍,권순석,김성훈,박지찬,홍은정,최경성,박용완,장준희,안지원,박유경,강지영,박상미,신완식 대한감염학회 2004 감염과 화학요법 Vol.36 No.5

We experienced a 25 year-old male patient with typhoid fever complicated with massive hemoptysis. Pulmonary complication in typhoid fever is very rare and to our knowledge, there has been no report of hemoptysis as a main cause of death with this disease. We herein report a rare case of typhoid fever.

커뮤니티공간으로서의 어린이공원 조성에 관한 연구

김연금,김성주,박환지,유다희,최성용,홍승모,Kim, Yun-Geum,Kim, Seong-Joo,Park, Hwan-Ji,Yu, Da-Hee,Choi, Sung-Young,Hong, Seung-Mo 한국조경학회 2008 韓國造景學會誌 Vol.35 No.6

This study deals with the participatory design process of renovating a children's park. The process should proceed with two major elements. Firstly, the children's park should be designed from the perspective of children. Secondly, it should be designed in consideration of the context of the community. This study is divided into two parts. First is the review of theory concerning the meaning and roles of the children's park as a community space, the importance of children's participation in the design and the participatory method of the children. The second is the case study. The site for the case study is Ssial Park in Nowon-Gu, Seoul. The entire process of the case study is with community participation, from identifying the park's problems to the actual construction. At every step, through the participatory programs, the community participates in the decision making. In addition, mutual understanding among participants is pursued through diverse means of communication. The following results of the case study were found. Firstly, diverse participatory programs and the active trial to enable the community to communicate contribute to the sense of ownership and responsibility concerning the park Secondly, the community can negotiate the differences in opinions without needing the help of experts. Of course, there are limits in the case study, such as the fact that the community organization, which is the core of communication and maintenance concerning the park, is not organized through the process of a case study. Another is that more diverse methods, which inform all community members of the participatory process, should have been used.

DNA Chip과 고정화 기술

박현규,지홍석,임성춘,장호남 한국화학공학회 2002 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.40 No.3

DNA chip 기술은, 인간 DNA 염기 서열상의 이상징후와 관련된 질병을 진단하거나 신약 개발을 위하여 특정 DNA 발현의 분석 등에 응용될 수 있다. 현재, DNA chip을 제작하고 DNA hybridization 반응 신호를 감지하는 방법에는 다양한 기술들이 있다. 본 글에서는 급성장하고 있는 DNA 칩의 전반적인 원리, 제조기술, 그리고 DNA를 chip에 고정화 시키는 기술을 중점적으로 소개하고자 한다. 또한 젊은 나이에서의 당뇨 발병과 관련된 유전자인 MODY의 유전자 변이를 진단하는 oligonucleotide DNA chip의 예를 보여주고자 한다. The application of DNA chip technology includes the diagnosis of various human diseases associated with DNA sequence anomalies and the comprehensive analysis of expressed sequences with regard to newer drug designs. There are a variety of options for making DNA chips and detecting hybridized signals. Here, we take a close look at the principles and manufacturing technologies of this rapidly growing area, highlighting the DNA immobilization technology on the chip. Finally we present an example of oligonucleotide chip for the analysis of multiple MODY gene mutations, which are related with diabetes of the young.

‘숙명역사관’뮤지엄 아이덴티티 개선을 위한 마케팅, 디자인 전략 수립 -특별 기획전, 홍보, 기프트 샵을 중심으로-

박민지,박한빛,서예원,이진민,장미정,이성애 숙명여자대학교 산업디자인연구소 2017 숙명디자인학 연구 Vol.24 No.-

본 연구는 디자인과 마케팅이 이분법적으로 나누어질 수 없음을 인식하고, 디자인과 마케팅을 융합하여 스페이스 디자인 마케팅을 통한 뮤지엄아이덴티티를 구축하는 일련의 프로세스를 제안하는데 목적이 있다. 본 연구는 2017년 3월~6월 총 15주간 숙명여자대학교 환경디자인과 ‘브랜드·스페이스·마케팅’수업에 서 진행된 결과물로서 작업물을 정리하였다. 본 연구의 범위는 4개(物, 事, 人, 場)의 주제 중, 장소(場)를 중심으로 ‘숙명역사관’의 그래픽, 제품, 공간을 개발하는 브랜드 매뉴얼과 연관하여 한정한다. 이에 본 연구는 ‘숙명역사관’이 가지고 있는 역사적 컨텐츠와 가치를 통해 현재 상황과 문제점을 분석하였다. 그 결과 ‘숙명역사관’의 다양한 마케팅 전략을 제시하고 이에 따른 디자인 전략과 해결 방안을 통해 디자인과 마케팅의 융합을 꾀하였다. 아울러 SWOT 분석을 통해 로고, 명함부터 새로 기획하는 숙명역사관 기프트샵, 인테리어디자인, 디스플레이, 공간연출과 그 안의 제품디자인에 이르기까지 일관성과 통일성을 추구했다. 끝으로 본 연구는 뮤지엄아이덴티티 구축을 위한 창의적 디자인 프로세스를 고찰하며, 이를 바탕으로 개발 매뉴얼을 총체적으로 정리함에 있어서 뮤지엄 브랜딩의 기초 자료로 활용될 것으로 기대된다.

간 이식 환자에서 발생한 파종성 Scedosporium apiospermum 감염 1예

박현구,최성호,강호석,송주형,정지훈,소민욱,최상호,김양수,우준희 대한감염학회 2006 감염과 화학요법 Vol.38 No.5

저자들은 다발성 뇌 농양을 동반한 치명적인 파종성 S. apiospermum 감염이 발생한 간 이식 환자를 경험하였다. 본 증례의 환자는 voriconazole로 치료하는 호전경과를 보이다가 진균성 뇌 동맥류 파열로 사망하였다. S. apio-spermum은 비교적 드문 진균으로 병리학적으로 Aspergillus spp.와 매우 유사하고 amphotericin B에 내성을 나타내므로 진단과 치료가 적절하게 이루어지지 못할 가능성이 많고 면역 기능 저하 환자에서 혈행성 전파를 통한 파종성 감염이 용이하게 발생하므로 높은 사망률을 나타낸다. 이식 환자를 비롯한 면역 기능 저하 환자에서 진균감염이 의심될 때 S. apiospermum과 같은 드문 진균에 의한 감염증도 감별진단에 포함해야 하겠다. Sedosporium apiospermum is a saprophytic fungus commonly found in soil and polluted water. This organism is known as a cause of mycetoma, which may occur in immunocompetent hosts following trauma. However, in immunocompromised patients, S. apiospermum can also cause life-threatening invasive disease, including central nervous system infection or disseminated infection. We report a fatal case of disseminated S. apiospermum infection in a 46-year-old woman after liver transplantation. Eight days postoperatively, she developed pneumonia, followed by altered mentality in the 15 days. A head CT demonstrated multiple brain abscesses. Sputum and stereotactic-aspirated brain abscess culture yielded S. apiospermum. Despite treatment with voriconazole, the patient died of intracranial hemorrhage.

FEA와 다이나모메터를 이용한 자동차 디스크 브레이크의 열적 거동에 관한 연구

박범식,손영지,장성규,전언찬 한국공작기계학회 2000 한국공작기계학회 추계학술대회논문집 Vol.2000 No.-

While braking cars, a large amount of energy is taken into the brake system in a short period of time. This leads to some problems ; cracking of the disc, non-uniform wear of pad and disc, fade. Thus it is important to measure the contact thermal behaviour precisely between disc and pad. The measurements must be considered to design the brake system. The paper describes methods to analysis the problem of the thermal behavior on the ventilated disc with ANSYS-a program of FEA and a brake dynamometer. According to this way, the paper can present the error between the data by the dynamometer and the results of analysis by ANSYS.