http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마이크로파 발열된 $V_2$$O_5$-PbO-$TeO_2$ 유리의 특성에 관한 연구
박희찬,이상은,김병우,박성수 한국세라믹학회 2001 한국세라믹학회지 Vol.38 No.5
600 W의 마이크로파 출력 하에서 PbO, V$_2$O$_{5}$, TeO$_2$ 및 V$_2$O$_{5}$-PbO-TeO$_2$성분들의 마이크로파 발열 특성을 조사하였다. V$_2$O$_{5}$ 성분의 높은 마이크로파 흡수능에 기인하여 V$_2$O$_{5}$-PbO-TeO$_2$유리상 시편들은 마이크로파를 흡수하여 주어진 온도까지 직접 가열되었다. XRD, OM, SEM 및 고전압 발생 측정기를 통하여 재래식 열 및 마이크로파 공정에서 열처리된 시편들의 결정화 및 전기 전도도의 특성을 비교 조사하였다. PbV$_2$O$_{6}$ 및 Pb$_4$V$_2$O$_{9}$ 결정상들이 마이크로파 열처리된 시편에서는 존재하였다. 그러나, 재래식 열처리된 시편들에서는 존재하지 않는다는 것을 확인하였고, 재래식 열처리된 시편들에 비하여 마이크로파 열처리된 시편들의 전기 전도도 값이 상대적으로 높았다.
초음파 조사에 의한 감마 알루미나 분말의 합성 및 특성에 관한 연구
박희찬,박재현,김병우,이상은,김준호,박성수,Park, Hee-Chan,Park, Jae-Hyun,Kim, Byoung-Woo,Lee, Sang-Eun,Kim, Jun-Ho,Park, Seong-Soo 한국세라믹학회 2001 한국세라믹학회지 Vol.38 No.10
카올린으로부터 알루미나를 추출 노는 한성에 미치는 초음파 효과를 조사하기 위하여 반응시간, 반응온도 및 산농도의 동일한 조건하에서 알루미나 추출 및 합성에 초음파 조사법과 재래식법을 사용하였다. 재래식법에 비하여 초음파 조사법은 $60{\sim}80^{\circ}C$, $1{\sim}6\;h$ 및 $1{\sim}5\;M$ ${H_2}{SO_4}$와 같은 다양한 조건하에서 알루미나 추출을 촉진시켰다. 초음파 조사법 및 재래식법에 의해 합성된 침전물과 하소된 시료들의 특성들이 DTA/TG, XRD, SEM, PSA, BET 등에 의해 분석되어졌다. 특히, 재래식법으로 합성된 하소시료들에 비하여 초음파 조사법으로 합성된 시료들은 상대적으로 입자 크기는 작고, 비표면적이 큰 특성을 자지고 있었다. An effect of ultrasonic irradiation for the extraction and synthesis of alumina from kaolin was investigated by comparing ultrasonic irradiation method and conventional method with the same factors as reaction time, reaction temperature, and acid concentration. The ultrasonic irradiation method accelerated alumina extraction in comparison to conventional method at $60{\sim}80^{\circ}C$ for $1{\sim}6\;h$ in $1{\sim}5\;M$ ${H_2}{SO_4}$. The characteristics of precipitates and calcined samples, synthesized under the ultrasonic irradiation method and the conventional method, were determined by the means of DTA/TG, XRD, SEM, PSA, BET, etc. Especially, the calcined sample synthesized under the ultrasonic irradiation method had smaller particle size and larger surface area than that synthesized under the conventional method.
고객중심의 국방규격 발전방안 연구 - 무기체계 연구개발을 중심으로 -
박희찬,길병옥 한국방위산업학회 2014 韓國防衛産業學會誌 Vol.21 No.2
본 연구는 무기체계 연구개발을 중심으로 고객중심의 국방규격 발전방안을 제시하는 것이 주된 목적이다. 구체적으로 선진사례인 미국의 국방규격 관련 제도 및 개선사항을 검토하고 우리나라 국방규격의 현 실태를 분석하여 고객의 개선 요구사항을 파악하며 효율적인 국방규격 관리체계를 발전시킬 수 있는 방안을 도출한다. 또한 본 연구는 우리나라 국방규격의 현황과 고객 요구사항에 대한 분석을 바탕으로 국방규격의 공개범위가 확대되어야 한다는 점을 강조하고 무기체계 획득과정에서 국방규격의 제도화의 시점이 일치해야 한다는 것을 지적한다. 궁극적으로 본 연구는 창조경제에 기여할 수 있는 국방규격 공개와 군수품의 전순기 동안 성능보장이 가능하도록 무기체계 연구개발을 중심으로 국방규격에 대한 정책적 대안을 마련하고자 한다. 결론에서 정부는 국방규격 관리체계와 표준화를 개선시킬 수 있는 방법을 제시해야 한다는 점을 강조한다. This paper searched for customer-centered development plans for military specifications based on the research and development of weapon systems. Specifically, by examining US rules and regulations, including refinement cases, customer needs pertaining to military specifications were analyzed. By looking at the historical trajectory of such needs, policy alternatives were provided in the fields of defense acquisition, operation and maintenance of military supplies. This inquiry also specified the current situation and status of customer requirements as well as future trends of and in the military specifications. It contended that such specifications should be opened to the general public and expanded, and the timing of legalization must be matched with the timing of the acquisition process of weapon systems. This paper finally concluded that the ROK government should provide ways of improving the standardization and management system of military specifications.
박희찬 한국장애인재활협회 2009 재활복지 Vol.13 No.4
Korea. Literature review and survey were major research methods. Regulations and guiding principles about vocational rehabilitation in the Korea Disabled People's Development Institute(KODDI) and Korea Employment Promotion Agency for the Disabled(KEPAD) were analyzed. Also, 31 vocational rehabilitation specialists from agencies of Community Rehabilitation Centers for the Disabled, sheltered workshops, corporation for the disabled, and Branches of KEPAD were surveyed about closure types stipulated in agency's regulations or service guidance directions. As a results of the study, concept and types of closure should be reestablished more systematically and in a vocational rehabilitation service related way. Also, responses on closure of cases were different from vocational specialists and agencies. The study suggested three types of closures in Korea: Before the IPE completion, after providing services based on IPE, and after employment. Implications of the study and discussions were followed.
Tubulin Polymerization에 대한 Microtubule Associated DNA Binding Protein 의 영향
박희찬,권기량,황병두 충남대학교 의과대학 지역사회의학연구소 1989 충남의대잡지 Vol.16 No.2
Although the involvement of tubulin in the segregation of chromosome during mitosis is well established, the role of DNA binding protein(DBP) in tubulin polymerization is unclear. When the microtubule was prepared from rabbit brain through 2 cycle of glycerol-and GTP-mediated polymerization, the preparation(MADBP^+) was found to have serveral DBP. These DBP were separated from tubulin using double strand DNA cellulose column chromatography and the proper-ties of this tubulin polymerizatin could be inhibited by DNA whereas MADBP^- polymerization could not. Addition of microtubule associated DNA binding protein(MADBP) to MADBP^- could change MA-DBP^- polymerization kinetics; some MADBP fractions decreased the initiation and increased the elongation, some fractions simply increased the polymerization. From the above results, the possible roles of MADBP and possible binding site of taxol were discussed.