Phenyl 2‐pyridyl ketoxime induces cellular senescence‐like alterations via nitric oxide production in human diploid fibroblasts

Yang, Kyeong Eun,Jang, Hyun‐,Jin,Hwang, In‐,Hu,Chung, Young‐,Ho,Choi, Jong‐,Soon,Lee, Tae‐,Hoon,Chung, Yun‐,Jo,Lee, Min‐,Seung,Lee, Mi Young,Yeo, Eui‐,J BLACKWELL PUBLISHING 2016 AGING CELL Vol.15 No.2

<P><B>Summary</B></P><P>Phenyl‐2‐pyridyl ketoxime (PPKO) was found to be one of the small molecules enriched in the extracellular matrix of near‐senescent human diploid fibroblasts (HDFs). Treatment of young HDFs with PPKO reduced the viability of young HDFs in a dose‐ and time‐dependent manner and resulted in senescence‐associated β‐galactosidase (SA‐β‐gal) staining and G2/M cell cycle arrest. In addition, the levels of some senescence‐associated proteins, such as phosphorylated ERK1/2, caveolin‐1, p53, p16<SUP>ink4a</SUP>, and p21<SUP>waf1</SUP>, were elevated in PPKO‐treated cells. To monitor the effect of PPKO on cell stress responses, reactive oxygen species (ROS) production was examined by flow cytometry. After PPKO treatment, ROS levels transiently increased at 30 min but then returned to baseline at 60 min. The levels of some antioxidant enzymes, such as catalase, peroxiredoxin II and glutathione peroxidase I, were transiently induced by PPKO treatment. SOD II levels increased gradually, whereas the SOD I and III levels were biphasic during the experimental periods after PPKO treatment. Cellular senescence induced by PPKO was suppressed by chemical antioxidants, such as N‐acetylcysteine, 2,2,6,6‐tetramethylpiperidinyloxy, and L‐buthionine‐(<I>S</I>,<I>R</I>)‐sulfoximine. Furthermore, PPKO increased nitric oxide (NO) production via inducible NO synthase (iNOS) in HDFs. In the presence of NOS inhibitors, such as L‐NG‐nitroarginine methyl ester and L‐NG‐monomethylarginine, PPKO‐induced transient NO production and SA‐β‐gal staining were abrogated. Taken together, these results suggest that PPKO induces cellular senescence in association with transient ROS and NO production and the subsequent induction of senescence‐associated proteins<B>.</B></P>

An Investigation of the Stability of Y₂O₃ and Sintering Behavior of Fe-Based ODS Particles Prepared by High Energy Ball Milling

Park, Eun-Kwang,Hong, Sung-Mo,Park, Jin-Ju,Lee, Min-Ku,Rhee, Chang-Kyu,Seol, Kyeong-Won The Korean Powder Metallurgy Institute 2013 한국분말재료학회지 (KPMI) Vol.20 No.4

Fe-based oxide dispersion strengthened (ODS) powders were produced by high energy ball milling, followed by spark plasma sintering (SPS) for consolidation. The mixed powders of 84Fe-14Cr-$2Y_2O_3$ (wt%) were mechanically milled for 10 and 90 mins, and then consolidated at different temperatures ($900{\sim}1100^{\circ}C$). Mechanically-Alloyed (MAed) particles were examined by means of cross-sectional images using scanning electron microscopy (SEM). Both mechanical alloying and sintering behavior was investigated by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM). To confirm the thermal behavior of $Y_2O_3$, a replica method was applied after the SPS process. From the SEM observation, MAed powders milled for 10 min showed a lamella structure consisting of rich regions of Fe and Cr, while both regions were fully alloyed after 90 min. The results of sintering behavior clearly indicate that as the SPS temperature increased, micro-sized defects decreased and the density of consolidated ODS alloys increased. TEM images revealed that precipitates smaller than 50 nm consisted of $YCrO_3$.

밀링 에너지 변화에 따른 TiC 분말의 미세화 거동에 관한 정량적 연구

홍성모,박은광,김경열,박진주,이민구,이창규,이진규,권영순,Hong, Sung-Mo,Park, Eun-Kwang,Kim, Kyeong-Yeol,Park, Jin-Ju,Lee, Min-Ku,Rhee, Chang-Kyu,Lee, Jin-Kyu,Kwon, Young-Soon 한국분말야금학회 2012 한국분말재료학회지 (KPMI) Vol.19 No.1

This study investigated refinement behaviors of TiC powders produced under different impact energy conditions using a mechanical milling process. The initial coarse TiC powders with an average diameter of 9.3 ${\mu}m$ were milled for 5, 20, 60 and 120 mins through the conventional low energy mechanical milling (LEMM, 22G) and specially designed high energy mechanical milling (HEMM, 65G). TiC powders with angular shape became spherical one and their sizes decreased as the milling time increased, irrespective of milling energy. Based upon the FE-SEM and BET results of milled powders, it was found initial coarse TiC powders readily became much finer near 100 nm within 60 min under HEMM, while their sizes were over 200 nm under LEMM, despite the long milling time of up to 120 min. Particularly, ultra-fine TiC powders with an average diameter of 77 nm were fabricated within 60 min in the presence of toluene under HEMM.

소동물 폐종양의 정량적 개선을 위한 내부 움직임 평가

유정우,우상근,이용진,김경민,김진수,이교철,박상준,유란지,강주현,지영훈,정용현,김병일,임상무,Yu, Jung-Woo,Woo, Sang-Keun,Lee, Yong-Jin,Kim, Kyeong-Min,Kim, Jin-Su,Lee, Kyo-Chul,Park, Sang-Jun,Yu, Ran-Ji,Kang, Joo-Hyun,Ji, Young-Hoon,Chung, Y 한국의학물리학회 2011 의학물리 Vol.22 No.3

이 연구에서는 폐종양의 정량적 개선을 위하여 분자체를 이용하여 내부 움직임을 측정하고 평가된 데이터를 기반으로 소동물 PET 영상내의 폐종양을 국소화하고자 하였다. 소동물 폐 영역의 내부 움직임은 방사성물질을 흡착한 분자체를 이용하여 소동물 폐 영역에 부착함으로써 구현하였다. 폐 영역의 내부 움직임 표적으로 사용된 분자체는 약 37 kBq의 Cu-64를 흡착시켜 폐종양을 모사하였다. 소동물 PET 영상은 Siemens Inveon 스캐너를 이용하여 획득하였으며 외부 움직임 데이터는 트리거 생성 장치인 BioVet을 이용하였다. SD-Rat PET 영상은 $^{18}F$-FDG 37 MBq/0.2 mL을 미정맥으로 주사하고 60분 후 20분간 데이터를 획득하였다. 리스트모드 데이터의 각 선응답은 외부 트리거 장치에 의해 획득된 트리거신호를 이용하여 2 bin에서 16 bin으로 사이노그램을 획득하였다. 획득된 사이노그램 데이터는 OSEM 2D 알고리즘을 이용하여 4회의 반복으로 재구성하였다. 종양의 정량적 분석을 위한 PET 영상은 종양을 묘사한 분자체 영역에 관심영역을 설정하고 계수와 SNR 그리고 FWHM을 이용하여 평가하였다. 움직임 표적으로 사용된 분자체의 크기는 $1.59{\times}2.50mm$이었으며, 기준 영상으로 획득한 체외 분자체 수직 및 수평 FWHM은 $2.91{\times}1.43mm$이었다. 정적영상과 4 bin 그리고 8 bin 영상에서의 수직 FWHM은 각각 3.90 mm, 3.74 mm, 3.16 mm이었으며 수평 FWHM은 각각 2.21 mm, 2.06 mm, 1.60 mm이었다. 정적영상, 4 bin, 8 bin, 12 bin 그리고 16 bin의 계수 값은 각각 4.10, 4.83, 5.59, 5.38, 5.31이었다. 정적영상, 4 bin, 8 bin, 12 bin 그리고 16 bin의 SNR은 4.18, 4.05, 4.22, 3.89, 3.58이었다. FWHM은 게이트 수의 증가에 따라 계속 향상됨을 확인하였다. 그러나 계수 값과 SNR은 게이트 수의 증가에 따라 계속 향상되지 않고 특정 bin 수에서 가장 높은 값을 보여 소동물 폐 영역에서의 종양 영상화시 SNR의 손실을 최소화하면서 향상된 계수 값을 얻을 수 있는 게이트 수를 획득하였다. 내부 움직임 측정은 최적화된 종양 국소화 영상을 획득할 수 있으며 외부 움직임 모니터링 시스템을 사용하지 않고 장기별 움직임 예측 모델링을 위한 유용한 방법이 될 것으로 기대된다. The purpose of this study was to estimate internal motion using molecular sieve for quantitative improvement of lung tumor and to localize lung tumor in the small animal PET image by evaluated data. Internal motion has been demonstrated in small animal lung region by molecular sieve contained radioactive substance. Molecular sieve for internal lung motion target was contained approximately 37 kBq Cu-64. The small animal PET images were obtained from Siemens Inveon scanner using external trigger system (BioVet). SD-Rat PET images were obtained at 60 min post injection of FDG 37 MBq/0.2 mL via tail vein for 20 min. Each line of response in the list-mode data was converted to sinogram gated frames (2~16 bin) by trigger signal obtained from BioVet. The sinogram data was reconstructed using OSEM 2D with 4 iterations. PET images were evaluated with count, SNR, FWHM from ROI drawn in the target region for quantitative tumor analysis. The size of molecular sieve motion target was $1.59{\times}2.50mm$. The reference motion target FWHM of vertical and horizontal was 2.91 mm and 1.43 mm, respectively. The vertical FWHM of static, 4 bin and 8 bin was 3.90 mm, 3.74 mm, and 3.16 mm, respectively. The horizontal FWHM of static, 4 bin and 8 bin was 2.21 mm, 2.06 mm, and 1.60 mm, respectively. Count of static, 4 bin, 8 bin, 12 bin and 16 bin was 4.10, 4.83, 5.59, 5.38, and 5.31, respectively. The SNR of static, 4 bin, 8 bin, 12 bin and 16 bin was 4.18, 4.05, 4.22, 3.89, and 3.58, respectively. The FWHM were improved in accordance with gate number increase. The count and SNR were not proportionately improve with gate number, but shown the highest value in specific bin number. We measured the optimal gate number what minimize the SNR loss and gain improved count when imaging lung tumor in small animal. The internal motion estimation provide localized tumor image and will be a useful method for organ motion prediction modeling without external motion monitoring system.

하악 우악부 골절의 구내접근법에 대한 임상적 평가

진국범,박경옥,이동근,장동호,민승기,방만혁 大韓顎顔面成形再建外科學會 1994 Maxillofacial Plastic Reconstructive Surgery Vol.16 No.1

Recently, we have used internal fixation with titanium miniplate which introduced by Champy in 1976 in facial bone fractures. In cases of mandibular fractures, particulary mandibular angle fractures, we usually underwent the open reduction extraorally. But extraoral approaches may leave scars and put the facial nerve at greater risk. So, we had undergone the intraoral approaches in 31 patients of mandibular angle fractures (male : 29, female : 2)> These patients visited in Wonkwang university hospital from October 1991 to June 1993. We got easy operation time as average 20 minutes than extraoral approach. And reduced the postoperative nerve injury(14.2%), but postoperative infection is 6.1% nearly as same as extraoral approach. TMJ problems after intraoral open reduction was similar to extraoral approaches.

積層複合板의 積層Parameter와 剛性에 관한 數値的 硏究

閔彰東,金敬鎭,成基泰 忠州大學校 1996 한국교통대학교 논문집 Vol.31 No.2

The material design of fibrous composite materials are composed by the design on mechanical properties of elemental specimen and structural members. The mechanical properties mean the elastic modulus, stiffness and strength. These are almost completed about various topics under the condition of static load. Methods for designing laminated composites which have required in-plane and/or flexural stiffness are studied in this paper. The characteristics of the parameters which were first introduced by Tasi and Hahn as geometric factors to evaluate the stiffness of composites and are referred to as laminated parameters are examined. It is shown that these parameters can play on important role in material design problem as well. The numerical results are compared with the previous obtained ones. Consequently, the useful informations that are orthotropic on quasi-isotropic types were obtained on the lamination parameter and the stiffness of symmetric laminated plates.

생체분해성 고분자를 이용한 사시수술용 제형개발 및 효용성에 대한 연구

민병무,김용백,김승영,김창식,박근성,길숙종,조항진,이성복,노승무,송규상,강대영,조준식,양준묵,정경수,최선웅,이진호,김학용,인현빈 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

A new device, muscle clamping system was developed to facilitate exact quatifying technique A strabismus surgery, and reduce the risk of complications. The device is composed of a lower fixing body with three jaws and an upper supporting body. They are used to clip an extraocular muscle and fix it to the sclera with a single bite. Superior rectus recession on 16 rabbit eyes were performed with this new device. Conjunctival injection, muscle adhesion strength, and light microscopic findings were examined at 1, 2, 4 and 8 weeks postoperatively. The Conjunctival injection were minimal, adhesion power ranged from 420 to 600 gram gravity, which is sufficient in withstand the normal pull of human extraocular muscle. In microscopic exam, some Inflammatory cells and fibrosis were found. The new device was technically easy, fast, and accurate, so it may be useful in stabismus surgery.

Factors Influencing the Acrylamide Content of Fried Potato Products

Jin, Yong-Ik,Park, Kyeong-Hun,Chang, Dong-Chil,Cho, Ji-Hong,Cho, Kwang-Su,Im, Ju-Sung,Hong, Su-Young,Kim, Su-Jeong,Nam, Jung-Hwan,Sohn, Hwang-Bae,Yu, Hong-Seob,Chung, Ill-Min The Korean Society of Environmental Agriculture 2016 한국환경농학회지 Vol.35 No.4

BACKGROUND: Acrylamide (CAS No. 79-06-1) is known to be a carcinogenic compound, and is classified as a Group 2A compound by the International Agency for Research on Cancer (IARC, 1994). Acrylamide can be generated during the browning process via the non-enzymatic Maillard reaction of carbohydrates such as reducing sugars and of amino acids such as asparagine, both of which occur at a temperature above $120^{\circ}C$. Potato tubers contain reducing sugars, and thus, this will affect the safety of processed potato products such as potato chips and French fries. In order to reduce the level of acrylamide in potato processed products, it is therefore necessary to understand factors that affect the reducing sugar content of potatoes, such as environmental factors and potato storage conditions, as well as understanding factors affecting acrylamide formation during potato processing itself. METHODS AND RESULTS: Potatoes were cultivated in eight regions of Korea; For each of these different environments, soil physico-chemical characteristics such as pH, electrical conductivity, total nitrogen, available phosphate, and exchangeable cation content were measured and correlations with potato reducing sugar content and potato chip acrylamide levels were examined. The reducing sugar content in potato during storage for three months was determined and acrylamide level in potato chip was analyzed after processing. The storage temperature levels were $4^{\circ}C$, $8^{\circ}C$, or $10^{\circ}C$, respectively. The acrylamide content of chips prepared from potatoes stored at $10^{\circ}C$ or $20^{\circ}C$ for one month was analyzed and the different frying times were 2, 3, 5, and 7 min. CONCLUSION: This study showed that monitoring and controlling the phosphate content within a potato field should be sufficient to avoid producing brown or black potato chips. For potatoes stored at low temperatures, a reconditioning period ($20^{\circ}C$ for 20 days) is required in order to reduce the levels of reducing sugars in the potato and subsequently reduce the acrylamide and improve chip coloration and appearance.

위암 환자의 복강내 투여를 위한 Activated Charcoal-Alginate Bead 제형으로부터 Mitomycin C의 용출 거동

이진호,최선웅,서중기,김동민,정경수,오정연,김진향,노승무,민병무,김용백,김창식,박근성,강대영,송규상,양준묵,조준식,정현용,김학용,인현빈 충남대학교 의과대학 지역사회의학연구소 1998 충남의대잡지 Vol.25 No.1

Locoregional recurrence is the most common type of recurrence in surgical operation of gastric adenocarcinoma, and peritoneal dissemination is one of the most difficult problems in advanced gastric adenocarcinoma treatment. Because the peritoneal cavity is the most common site of the first recurrence after gastric cancer resection, intraperitoneal chemotherapy seems a logical choice for cancer chemotherapy. In this study, Mitomycin C (MMC)-activated charcoal (CH)-alginate (ALG) beads were prepared by the mixtures of CH particles adsorbed with MMC as an anti-cancer drug and aqueous alginate solution. The alginate is recognized as biodegradable, nontoxic, and biocompatible. The release of MMC from the beads in 0.1 M Tris buffer was stable and continuous until about 1 week. The MMC-CH-ALG beads can be applied in the peritoneal cavity for intraperitoneal chemotherapy since they provide a good adhesiveness on the tissue and controlled release pattern of the drugs.

Analysis of monitoring Road-kill in Odaesan National Park

Sang Jin Lim,Ki Yoon Kim,Woo Chan Lim,Hyeong Woo Ji,Baek Soon Choi,Tae Il Kim,Hyo Nam Kim,Ji Hong Min,Hey Ri Kim,Eui Kyeong Kim,Yung Chul Park 강원대학교 산림과학연구소 2017 강원대학교 산림과학연구소 학술대회 Vol.2017 No.11

We surveyed mammalian roadkill at the National Route 6 (Jin-gogae to Songcheon, 18㎞) and a local road 446 (Odaesan National Park office to Sangwon-temple, 12㎞) in Odaesan National Park. Data of the surveys were analyzed by year, month, and species. Roadkills of 226 individuals were found at the survey areas. Of them, the road-killed 131 mammal individuals, 44 bird individuals, 40 reptile individual and 11 amphibian individuals were found during the survey period. High ratio of the road-kills was observed in mammals than the other animals. Among mammalian species, high ratio of the road-kills was observed in squirrels. There were road-kills of three endangered species, containing otters, yellow-throated marten and leopard cats. According to the analyses of annual road-kills, roadkills of 104 cases were occurred and highly frequent in 2014, following by roadkills of 81 cases in 2015, and then those of 41 cases in 2016. Most ases of the roadkills occurred in summer (June to September). The results will contribute to establishing management for reduction of roadkill in Odaesan National Park.