알데히드탈수소효소 2(ALDH2) 및 CYP2E1 유전자 다형성에 따른 요중 뮤콘산 농도와 요중 8-hydroxydeoxyguanosine과의 관련성

김용대,강종원,엄상용,장연위,김성훈,김은영,이철호,문재동,김헌 대한산업의학회 2007 대한직업환경의학회지 Vol.19 No.2

Quantitative comparison of mRNA expression of glucosyltransferase(GTF) between xylitol-resistant(X^(R)) and xylitol-sensitive(X^(s)) mutans streptococci

Kim, Chong-Chul,Lee, Mi-Na,Kim, Young-Jae,Lee, Sung-Hoon 大韓小兒齒科學會 2006 大韓小兒齒科學會誌 Vol.33 No.1

Since the long-term exposure of mutans streptococci to xylitol is known to select for xylitol-resistant(X^(R)) natural mutants, the occurrence and survival of such X^(R) strains were performed in batch culture methods. The aim of the study was to compare the differentiation and quantification of mRNA expression of the gtf genes of X^(R) and X^(S) mutans streptococci. Using a real-time reverse-transcription polymerase chain reaction, the expression of each gtf was determined. In X^(R) strains, the relative levels of transcription of gtfB and gtfC were decreased while that of gtfD was increased, suggesting the presence of independent promoters. It also suggested that mutation related to production of glucosyltransferase occurred under the exposure of xylitol could explain the caries-preventive mechanisms of xylitol. 자일리톨에 장기간 노출된 mutans streptococci는 자일리톨에 내성이 발현되어 자일리톨 내성균주가 생성된다고 알려져 있다. 본 연구의 목적은 mutans streptococci에서 자일리톨 내성균주와 감성균주의 gtf 유전자 발현량을 각각의 유전자별로 정량적으로 분석하고 비교하는 것이다. 실시간 역전사 중합효소연쇄반응법을 이용하여 각각의 gtf 발현을 조사한 결과 gtfD는 증가한 반면. gtfB와 gtfC는 감소하였는데 이는 각 유전자의 독립된 조절기전이 존재함을 보여주는 것이다. 또한 자일리톨에 노출된 mutans streptococci에서의 glucosyltransferase와 연관된 유전자변형이 자일리톨의 치아우식증 예방효과의 작용기전 중 하나임을 알 수 있었다.

Apoptotic Effect of Co-treatment with Chios Gum Mastic and HS-1200 on G361 Human Melanoma Cell Line

Young-Joo Hur,Young-Ki Kim,Hyun-Ho Kwak,Gyoo-Cheon Kim,Seung-Eun Lee,In-Ryoung Kim,Chul-Hoon Kim1,Bong-Soo Park 대한해부학회 2009 Anatomy & Cell Biology Vol.42 No.2

Chios gum mastic (CGM) is a resinous exudate obtained from the stem and the main leaves of Pistacia lenticulus tree native to Mediterranean areas. Recently it reported that CGM induce apoptosis in a few cancer cells in vitro. Bile acids and their synthetic derivatives induced apoptosis in various kinds of cancer cells and anticancer effects. It has been reported that the synthetic chenodeoxycholic acid (CDCA) derivatives showed apoptosis-inducing activity on various cancer cells in vitro. This study was undertaken to investigate the synergistic apoptotic effect of cotreatment with a natural product, CGM and a CDCA derivative, HS-1200 on G361 human melanoma cells. To investigate whether the co-treatment of CGM and HS-1200 compared with each single treatment efficiently reduced the viability of G361 cells, MTT assay was conducted. To investigate augmentation of apoptosis in G631 cells co-treated with CGM and HS-1200, DNA electrophoresis, Hoechst staining, proteasome activity assay, flow cytometry, Westen blot analyses, immunofluorescent staining and confocal microscopy were performed. In this study, G361 cells co-treated with CGM and HS-1200 showed several lines of apoptotic manifestation such as nuclear condensations, DNA fragmentation, the reduction of MMP and proteasome activity, the decrease of DNA content, the release of cytochrome c into cytosol, the translocation of AIF and DFF40 (CAD) onto nuclei, activation of caspase-9, caspase-3, PARP and DFF45 (ICAD), and up-regulation of Bax whereas each single treated G361 cells did not. Although the single treatment of 40 μg/mL CGM or 25 μM HS-1200 for 24 hrs did not induce apoptosis, the co-treatment of them induced prominently apoptosis. Therefore, combination therapy of CGM and HS-1200 could be considered, in the future, as an alternative therapeutic strategy for human melanoma.

Wiskott-Aldrich 증후군 환아의 증례보고

이연주,현홍근,장철호,김영재,김정욱,장기택,김종철,한세현,이상훈 대한소아치과학회 2007 大韓小兒齒科學會誌 Vol.34 No.3

후복막강경 근치적 신적출술 : 개복 근치적 신적출술과의 비교

김경영,임동훈,문형윤,노준,김철성 朝鮮大學校 附設 醫學硏究所 2009 The Medical Journal of Chosun University Vol.33 No.S

Purpose: Although kidney is located in the retroperitoneal space laparoscopic radical nephrectomy is usually performed by the transperitoneal approach. At our institution the retroperitoneal approach is preferred. We evaluated the surgical outcomes, safety, oncologic outcomes, and compared with the results those of open radical nephrectomy in a contemporary cohort. Materials and Methods: Between January 2000 and December 2005 we performed retroperitoneal laparoscopic radical nephrectomy for renal cell carcinoma in 37 patients with clinical stage cT1 and cT2. Data from the these patients were retrospectively compaired with 30 contemporary cases treated with open radical nephrectomy. The clinical parameters including perioperative outcomes, complications, pathologic data, learning curve and recurrence were evaluated. Results: For the 37 retroperitoneal radical nephrectomies mean tumor size was 4.6cm (range 2.3 to 8.0), surgical time was 203.6min (range 110-410) and blood loss was 241.8cc. Mean specimen size was 10.4cm (8.7-14.4). Mean analgesic used day was 1.3 (0-4) and mean postoperative hospital stay was 4.2 days. minor complications occur in 16 cases and no major complications occurred. Surgical margins were negative for tumor in all patients. Variable parameters were comparable between patients undergoing laparoscopic and open radical nephrectomy. However, laparoscopy resulted in decreased blood loss, surgical times, analgesia use, time to oral intake, time to drain removal and postoperative hospital stay. No different complication rate is between two groups Conclusions: Retroperitoneal laparoscopic radical nephrectomy can be a safe and effective treatment in renal cell carcinoma. Although no long-term follow-up is available, our follow up to mean 31 months confirm the effectiveness of retroperitoneal laparoscopic radical nephrectomy in terms of surgical principles and oncological effectiveness.

반코마이신 내성 장내구균 분리 환자에서 황색포도알균의 내성

김동욱,신선혜,김혜진,류선,이선희,장철훈,김영대,곽임수 대한감염학회 2004 감염과 화학요법 Vol.36 No.1

목적 : Vancomycin-resistant enterococci (VRE)로부터 S. aureus로의 vacomycin 내성 유전자의 전파는 오래전부터 예견되어져 왔으며 큰 걱정거리로 남아있다. 최근에 vanA 유전자를 가지고 있는 vancomycin-resistant S. aureus 2주가 미국에서 분리되었다. 이 연구의 목적은 VRE를 보균하고 있는 환자들에서 S. aureus 보균양상과 항균제 내성을 알아보는데 그 목적이 있다. 재료 및 방법 : 2001년 1월부터 2001년 12월까지 부산대학교병원에 입원하였던 환자들 중 임상검체에서 VRE가 분리된 환자 7명과 2001년 9월부터 12월까지 외과 중 환자실에 입원하였던 환자들 중 VRE 감시배양을 시행하였던 20명의 환자들을 대상으로 하였다. 환자들은 전비공, 액와부, 회음부, 직장에서 매주 면봉으로 검체를 채취하였다. 선별배지에서 검체를 배양하여 S. aureus를 분리하였고 원판 확산법을 이용하여 methicillin 감수성을 측정하였다. Broth microdilution 법으로 vancomycin MIC를 측정하였다. 결과 : 총 27명에서 73회의 방문과 292회의 배양이 시행되었으며 총 67주의 S. aureus가 분리되었다. 이중 64주(95.5%)가 methicillin 내성이었다. 전비공 MRSA 보균율은 VRE를 보균하고 있었던 환자는 19명 중 11명(58%)에서, VRE를 보균하지 않았던 환자는 8명 중 3명(37.5%)으로 VRE 보균자에서 보균율이 더 높았다. 총 64주의 MRSA의 vancomycin MIC의 분포는 0.5-2㎍/mL였으며 2㎍/mL를 초과하는 균주는 발견되지 않았다. 64주 중 vancomycin MIC가 1㎍/mL인 균주가 54주(84.4%)로 가장 많았으며 2㎍/mL 6주(9.4%), 0.5㎍/mL 4주(6.3%)의 순이었다. 결론 : VRE 환자에서 S. aureus의 보균율은 비보균자 보다 높았으며 분리된 균주들은 대부분 MRSA였다. VRSA 균주는 발견되지 않았다. Background : The transfer of vancomycin resistance from vancomycin-resistant enterococci (VRE) to Staphylococcus aureus has been predicted. The purpose of this study is to determine the prevalence and antibiotics resistance of S. aureus among patients colonized with VRE. Methods : Between January 2001 and December 2001, a prospective study was performed at Pusan National University Hospital on 27 patients. Surveillance swabs from nasal cavity, axilla, perineum, and rectum were obtained at weekly intervals. Methicillin susceptability of S. aureus was determined by oxacillin disk diffusion test and minimum inhibitory concentration (MIC) for vancomycin by microdilution broth test. Results : Total of 292 swab cultures were performed and 67 S. aureus isolates were collected. 64 isolates (95.5%) were resistant to methicillin. The prevalence of nasal MRSA carrier in 19 patients colonized with VRE was higher than that in 8 patients not colonized with VRE (58% vs. 37.5%). In 64 MRSA isolates, MIC (㎍/mL) for vancomycin ranged from 0.5 to 2. No isolates with MIC >2 ㎍/mL were observed. MIC of 1 ㎍/mL was shown (observed) in 54 isolates, 2 ㎍/mL in 6 isolates, and 0.5 ㎍/mL in 4 isolates. Conclusion : The prevalence of S. aureus with colonization of VRE is higher than that without colonization of VRE. Most of S. aureus isolates were resistant to methicillin. VRSA isolates were not observed.

眉叟 許穆 散文의 特徵과 그 意味

김철범,신승훈 경성대학교 한국학연구소 2006 文化傳統論集 Vol.13 No.-

분절호선법으로 상하악 절치부 압하 시 순측경사도가 미치는 영향에 관한 3차원 유한요소법적 연구

김동우,양훈철,김기태,김성식,손우성 대한치과교정학회 2003 대한치과교정학회지 Vol.33 No.4

본 연구는 상하악 절치부의 압하를 도모하기 위한 장치의 하나인 분절호선장치를 사용하여 절치부의 순측경사에 따른 저항중심의 위치와 변화양상, 그리고 치축경사 개선과 압하를 동시에 이루기 위해 필요한 최소 후방 견인력의 크기 및 변화양상을 알아보기 위하여 3차원 유한요소법을 이용하여 시행되었으며 다음과 같은 결론을 얻었다. 1. 치축 경사도의 변화에 따른 상악 절치부 저항중심은 1) 정상 치축경사를 가진 경우에서 측절치 브라켓 원심면 후방 6mm에 위치하였다. 2) 순측경사가 10˚ 증가된 경우에서 측절치 브라켓의 원심면 후방 9mm에 위치하였다. 3) 순측경사가 20˚ 증가된 경우에서 측절치 브라켓 원심면 후방 12mm에 위치하였다. 4) 순측경사가 30˚ 증가된 경우에서 측절치 브라켓 원심면 후방 16mm에 위치하였다. 2. 치축 경사도의 변화에 따른 하악 절치부 저항중심은 1) 정상 치축경사를 가진 경우에서 측절치 브라켓 원심면 후방 10mm에 위치하였다. 2) 순측경사가 10˚ 증가된 경우에서 측절치 브라켓 원심면 후방 13mm에 위치하였다. 3) 순측경사가 20˚ 증가된 경우에서 측절치 브라켓 원심면 후방 15mm에 위치하였다. 4) 순측경사가 30˚ 증가된 경우에서 측절치 브라켓 원심면 후방 18mm에 위치하였다. 3. 응력 분포 양상은 1) 각 저항중심에서 압하력을 가한 경우에 치주인대에 균일한 압축응력을 나타내었다. 2) 후방 견인력을 동시에 적용한 경우에 순측경사가 증가할수록 응력분포 양상이 복잡해지는 양상을 보였다. 4. 상하악 절치부가 20˚까지 순측경사된 경우에서 pure intrusion을 위하여 필요한 후방 견인력의 크기도 증가하였다. This study was designed to investigate the position of anteroposterior center of resistance for genuine intrusion and the mode of change of the minimum distal force for simultanous intrusion and retraction of the upper and lower incisors according to the increase of labial inclination. For this purpose, we used the three-piece intrusion arch appliance and three-dimensional finite element models of upper and lower incisors. 1. Positions of the center of resistance in upper incisors according to the increase of the labial inclination were as follows; 1) In normal inclination situation, the center of resistance was located in 6mm behind the distal surface of the lateral incisor bracket. 2) In 10˚ increase of the labial inclination situation, the center of resistance was located in 9mm behind the distal surface of the lateral incisor bracket. 3) In 20˚ increase of the labial inclination situation, the center of resistance was located in 12m behind the distal surface of the lateral incisor bracket. 4) In 30˚ increase of the labial inclination situation, the center of resistance was located in 16m behind the distal surface of the lateral incisor bracket. 2. Positions of the center of resistance in lower incisors according to the increase of the labial inclination were as follows; 1) In normal inclination situation, the center of resistance was located in 10mm behind the distal surface of the lateral incisor bracket. 2) In 10˚ increase of the labial inclination situation, the center of resistance was located in 13mm behind the distal surface of the lateral incisor bracket. 3) In 20˚ increase of the labial inclination situation, the center of resistance was located in 15m behind the distal surface of the lateral incisor bracket. 4) In 30˚ increase of the labial inclination situation, the center of resistance was located in 18m behind the distal surface of the lateral incisor bracket. 3. The patterns of stress distribution were as follows; 1) There were even compressive stresses in and periodontal ligament when intrusion force was applied through determined center of resistance. 2) There were gradual increase of complexity in compressive stress distribution pattern with increase of the labial inclination when intrusion and retraction force were applied simultaneously. 4. With increase of the labial inclination of the upper and lower incisors, the position of the center of resistance moved posteriorly. And the distal force for pure intrusion was increased until 20˚ increase of the labial inclination.

분자역학적 방법을 이용한 부산시내 대형건물 냉각탑수의 레지오넬라균의 형별 분류

김정만,정석훈,서대영,박은희,송은주,최재철,이은엽,장철훈 대한임상미샐물학회 2004 Annals of clinical microbiology Vol.7 No.1

CO_2 레이저빔을 이용한 TFT-LCD 도광판의 패턴 제작에 관한 연구

김경동,백창일,송철기,안성훈 경상대학교 생산기술연구소 2002 工學硏究院論文集 Vol.2 No.-

A light guide panel is an element of the LCD backlight module that is often used for the display of compact electronic devices. In this study, a laser marking system is proposed to fabricate light guide panel, which can replace other manufacturing methods such as silk printing, stamping, or v-cutting methods. The objective of this research is to evaluate the process parameters of the laser marking system. Light guide patterns were marked with a 50W CO_2 laser(CW) to understand the effects of average power and scanning speed on the geometry and quality of groove pattern. The width of the fabricated grooves increases with increasing laser power and decreasing scan speed. In order to analyze surface characteristics and optical properties(luminance, uniformity), SEM photography and BM7(luminance measuring system) were used. As a result, the optimal conditions of the process parameters that provide high luminance was obtained.