정신분열병에 대한 리스페리돈의 효과 및 안정성

이민수,김용구,김영훈,연병길,오병훈,윤도준,윤진상,이철,정희연,강병조,김광수,김동언,김명정,김상훈,김희철,나철,노승호,민경준,박기창,박두병,백기청,백인호,손봉기,손진욱,양병환,양창국,우행원,이정호,이종범,이홍식,임기영,전태연,정영조,정영철,정인과,정인원,지익성,채정호,한상익,한선호,한진희,서광윤 大韓神經精神醫學會 1998 신경정신의학 Vol.37 No.1

연구목적 : 본 시험의 목적은 임상시험 시작전에 연구자들을 대상으로 PANSS Workshop을 통하여 PANSS, ESRS에 대한 국내에서의 표준화 작업을 구축하고 새로운 정신병 치료제인 리스페리돈의 효과와 안정성을 재확인하여 리스페리돈 사용에 대한 적정화를 이루는데 있다. 연구방법 : 1996년 4월부터 1996년 9월까지 국내 39개 대학병원 정신과에 입원중인 혹은 증상이 악화되어 입원하는 정신분열병 환자 377명을 대상으로 다시설 개방 연구를 시행하였다. 1주일간의 약물 배설기간을 가진후, 리스페리돈을 8주간 투여하였고, 기준점, 1주, 2주, 4주, 그리고 8주후에 평가되었다. 용량은 제1일에는 리스페리돈 1mg씩 1일 2회, 제2일에는 2mg씩 1일 2회, 제3∼7일에는 3mg씩 1일 2회 투여하였다. 이후 환자의 임상상태에 따라 임의로 증량할 수 있으며, 최대 일일 16mg을 초과하지 않도록 하였다. 추체외로 증상을 조절하기 위한 투약을 허용하였다. 임상증상 및 부작용의 평가는 PANSS(Positive and Negative Syndrome Scale), CGI(Clinical Global Impression) 그리고 ESRS(Extrapyramidal Symptom Rating Scale)을 사용하였다. 연구결과 : 377명중 343명(91%)이 8주간의 연구를 완결하였다. 치료 종결시점인 8주후 PANSS 총점수가 20% 이상 호전된 경우를 약물 반응군으로 정의할때, 약물반응군은 81.3%였다. 리스페리돈에 반응하는 예측인자로는 발병연령, 이전의 입원 횟수, 유병기간이 관련 있었다. 리스페리돈은 1주후부터 PANSS양성, 음성, 및 일반정신병리 점수상에 유의한 호전을 보여 효과가 빨랐다. CGI의 경우도 기준점에 비해 1주후부터 유의한 감소를 나타내었다. ESRS의 경우, 파킨슨 평가점수는 기준점과 비교해 투여 1주, 2주, 4주후 유의하게 증가되었다가 8주후 기준점과 차이가 없었다. Dystonia 평가점수는 1주후만 유의한 증가를 보였으며, dyskinesia 평가점수는 유의한 차이가 없었다. 혈압, 맥박수의 생명징후 및 일반 혈액학 검사, 생화학적 검사, 심전도 검사에서 유의한 변화는 없었다. 결 론 : 이상의 다시설 개방 임상 연구를 통해 리스페리돈은 정신분열병 환자에서 양성증상뿐만 아니라 음성증상 및 전반적인 증상에도 효과적인 것으로 사료된다. 보다 명확한 평가를 위해서는 다른 항정신병약물과의 이중맹검 연구가 필요할 것으로 생각되며, 또한 장기적 치료에 대한 평가도 함께 이루어져야 하겠다. Objective : The purpose of this study was to investigate the efficacy and safety of risperidone in the treatment of Korean schizophrenic patients. Method : This multicenter open study included 377 schizophrenic patients drawn from 39 university hospitals. After a wash-out period of 1 week, the schizophrenic patients were treated with risperidone for 8 weeks and evaluated at 5 points ; at baseline, and 1, 2, 4 and 8 weeks of treatment. The dose was increased from 2mg/day(1mg twice daily) to 6mg/day(3mg twice daily) during the first week and adjusted to a maximum of 16mg/day over the next 7 weeks according to the patient's clinical response. Medication to control extrapyramidal symptoms was permitted. The psychiatric and neurological status of the patients was assessed by PANSS, CGI, and ESRS scales. Results : 343(91%) of 377 patients completed the 8-week trial period. Clinical improvement, as defined by a 20% or more reduction in total PANSS score at end point, was shown by 81.3% of patients. The predictors of response to risperidone were associated older age, shorter duration of illness, fewer previous hospitalization. Risperidone had rapid onset of action ; a significant decrease of the total PANSS and three PANSS factor(positive, negative, general), and CGI was already noticed at the end of first week. For the ESRS, parkinsonism rating scores were significantly increased until week 4 comparing with baseline. Dystonia rating scores were significantly increased until week 1, and dyskinesia rating scores were not significantly changed during the study. Laboratory parameters including vital sign, EKG, hematological, and biochemical values showed no significant changes during the trial. Conclusions : This study suggests that risperidone is generally safe and effective against both the positive and negative symptoms in our group of patients.

플라즈마 표지소자의 제작

이상윤,라병욱,박동수,황인헌,이덕동,신영남,박성배,이동욱,박용석,박형근,손상호,권태근,채경락,정경득 慶北大學校 自然科學大學 1986 自然科學論文集 Vol.4 No.-

An Ac-type Plasma Display Panel (PDP) operating with Ne-Ar(0.1%) Penning mixture gas is fabicated. The characterics of the panel with electrodes covered with thin and thick dielectric layers are studied. The brightness of the Neon-orange light emitted by the panel measured as function of applied voltage and frequency. As an application, a graphic display system equipped with PDP showing still and moving pictures is made.

Lunar Sodium Observations at the Kyung-Hee Observatory

Dong-Wook Lee,Kyung-Won Chun,Sang-Joon Kim 한국천문학회 2010 天文學會報 Vol.35 No.1

사후분해 시체에 대한 법의학적 접근

최영식,이상용,김유훈,조갑래,이봉우,양경무,정낙은,서중석,이한영,이원태,강현욱 大韓法醫學會 2000 대한법의학회지 Vol.24 No.2

Disposal of a homicide victim by dismemberment is rare, but individual cases are on record in most major medicolegal departments. Recognition of postmortem mutilation may be of importance in the interpretation of certain murders committed by sexual perverts and other mentally deranged individuals and sometimes performed for the sole reason of easier disposal of the body. Postmortem dismemberment is usually readily recognizable as such; The edges of the injuries are dry and lack evidence of bleeding. The joints may be disarticulated without fracture, or the use of an axe or saw may be evident from examination of bones. Parallel horizontal or oblique furrows in the bone surface are caused by skipping of the saw prior to establishing depth. Such patterns on the bone may assist in identifying the particular saw involved. So we report 25 dismembered corpses that autopsied in National Institute of Scientific Investigation. This paper can help in attempting to establish not only the first criminal investigation steps but also the medicolegal approach methods in unidentified and dismembered deaths.

Purge & Trap-GC를 이용한 의약품 필름코팅 정제 중 잔류용제에 관한 연구

장준식,이명자,소유섭,문춘선,이주헌,박희라,김진숙,강경모,이선옥,방성연,유미자,유문균,금오성,이병욱 식품의약품안전청 2000 식품의약품안전청 연보 Vol.4 No.-

의약품은 약물을 생체에 적풋하기 위하여 유효성분의 효과가 언제나 일정하게 확보되고 사응에 편리하도록 만들어지는 것이므로 유효썽분 이외에 약효에 영향을 주지 않는 성분이 첨가되는 경운가 많다. 이 때 사용되는 용매들은 제피의 광택 및 건쪼시간의 단축 등을 위하여 휘발점이 낮을 용매들이 주로 사용되어진다. 본 연구는 의약품 필름코팅정제 중 잔류용매 4종(chlorofonr benzen, trichloro ethylen, 1,4-dioxane)에 대한 변형된 pirge & trap-GC 장치를 이용한 동시분석방법을 개발하였으며, 각 표준품의 RSD 값은 chloroform 3.03%, benzen 3.17%, trichloroethylen 3.69% and 1,4-dioxane 3.41%였다. 또한 시중 유통중인 의약품 50종에 대하여 잔류웅매 양을 측정하였으며, 검출되는 잔류용매는 한 건도 없었다. This study nras carried out to develope the analytical method for the mixture of chlorefonn, benzen, trichloroethylen and 1,4-dioxane simultaneously and determine the remainingorgauic solvents in coating tablets by Purge & Trap-GC. The results were as follouFs ; 1. Chloroform, benzen, trio:tloroethylen and 1,4-dioxane separated by tenax #5 trap by HP-624GC column by terrlperature programming. The peaks were separated completely at retentiontime of 6.88min for chloroform, 8.21min for benzen, 10.38miu for trichloroethylen and 11.95minfor 1,4-dioxane. 2. Standard RSD were individually chloroform 3.03%, benzen 3.17%, trichloroethylen 3.69%and 1,4-diorane 3.41%. 3. 60 samples were not detrcted chloroform, benzen, trichloroethylen and 1,4-dioxane.

A Study on the appropriate herbal medicine according to Sasang constitution using EAV

Choi,Jin-Wook,Lee,Su-kyung,Hong,Suck-chull,Koh,Byung-hee INSTITUTE OF ORIENTAL MEDICINE KYUNG-HEE UNIVERSIT 1997 JOURNAL OF ORIENTAL MEDICINE Vol.2 No.1

1. Objective This is a basic study about the response of herbal medicine to EAV. The purpose was to investigate how the meridian of EAV responded to herbal medicine and how EAV was applied to the diagnosis of Sasang constitution. 2. Materials & Methods The subjects of this study were patients who were being treated in the Dept. of Constitutional Medicine ot Kyung-Hee Medical Center. The study examined how herbal medicine affected the maximum value and the indicator drop and how each constitution responded differently to the constitutional herb medicine. 3. Results & Conclusions 1) When comparing the maximum value and ID of the worst BAP before and after the experiment with herbal medicine, the maximum value significantly went up and the ID significantly went down in all the herbal medicines. So we confirmed that all the herbal medicines positively affected the change of the maximum value and ID. 2) The changes in the maximum value induced by herbal medicines were significantly different according to the constitution of Dokhual Jihwang Tang, and Hyangbuja Palmul Tang. Although Dokhual Jihwang Tang was soyangin's herb medicine in Sasang constitutional medicine, it raised the value of soeumin higher than that of soyangin. Hyangbuja Palmul Tang which was soeumin's herb medicine raised the value of soeumin higher than that of the other constitution. 3) The changes of ID were not significantly different in the constitution.

음식물 폐기물류로 제조된 퇴비의 고형연료 가치 평가 연구

이경섭,장한별,정은지,도아름,하진욱 순천향대학교 부설 산업기술연구소 2021 순천향 산업기술연구소논문집 Vol.27 No.2

In 2019, the daily generation of food waste in Korea was 14,314 tons, which is a steady increase compared to the past. To efficiently use food waste as an effective resource, composting and feeding are carried out. In Korea, attention is gradually focused on a sustainable resource circulation society. Compost made of food waste has problems with foreign substances, heavy metals, and salt content, and solid fuelization research is being actively conducted to compensate for this. In this study, infrared spectroscopy(FT-IR), organic content measurement(TGA), and chemical composition were measured to compare the fuel characteristics with wood pellets, which are major solid fuels, in order to examine the physical and chemical properties of food waste compost.

Si-Schottky障壁型의 大陽電池 製作에 관한 硏究

李相潤,羅炳旭,朴德圭,李鍾德,金奎用,玄東杰,禹洪,盧景錫 慶北大學校 物理化學硏究所 1981 硏究論文集 Vol.1-2 No.-

The characteristics of these Si-schottky barrier type and Heterojunction type solar cells are as follows; 1. SnO_2/n-Si Heterojunction Solar Cells Fabricated by Spray Pyrolysis Method SnO_2 film were deposited on the (100) or (111) surface of Si single crystal by the spray pyrolysis method. The best SnO_2/n-Si solar cell has a good performance, with an open-circult voltage: Voc.=0.45V, short circuit current: Isc.=35.5㎃, fill factor: FF.=0.64, and conversion efficiency: η=10.2% under 98㎽/㎠ irradiation of AMl. The spray pyrolysis described in this paper is simple and suitable for mass production. One possibility for cost reduction lies in this method of junction fabrication, and the idea of simply deposited SnO_2/n-Si junction is, at first sight, very attractive. Hence the SnO_2/n-Si Solar Cell and the effectiveness of this method may be of great value in some future production of low-cost solar cells. 2. In_2O_3: Sn Heterojunction Solar Cells Fabricated by Spray Pyrolitic Method Highly conductive and transparent thin films of In_2O_3: Sn (ITO) are fabricated by spray pyrolytic method. The parameters of these thin films are as follows: resistivity ρ = 1.5×10 exp (-3) Ω·㎝, carrier concentration n = 7.5×10 exp (19) cm^-3, mobility μ = 55.5 ㎠/V·sec and transmission 85-90% over visible and long wave-length region. These thin films have simple cubic system with lattice constant 10.2Å. In_2O_3: Sn/n-Si heterojunction solar cells are fabricated, depositing In_2O_3: Sn (ITO) thin films on n-Si substrates with orientation(100) and resistively 2-3Ω, ㎝ by spray pyrolitic method. Under AMl sunlight simulator, the parameters of the excellent cell obtained has open-circuit voltage Voc=0.52V, short-circuit current I_sc=39.0㎃, fill factor: F.F=0.60 and conversion efficiencyη=12.1%. 3. Al/p-Si MOS Solar Cells Fabricated by Vacuum Evaporation Method Al/p-Si MOS solar cells, consisting of Al on P-tupe silicon with a thin interfacial layer of SiO_2 have been found to have good light conversion efficiency for solar radiation. The effects of the oxide layer thickness between metal and substrate were investigated. Under AMl simulated sunlight illumination the best cell has open circuit voltage Voc=0.50V, short-circuit current I_sc=26.3㎃/㎠, fill-factor FF=0.70 and conversion efficiency η=9.2%. 4. Cr-Cu/P-Si MOS Solar Cells Fabricated by Vacuum Evaporation Method Cr-Cu/p-Si MOS Solar cells, consisting of Cr-Cu on p-type silicon with a thin interfacial layer of SiO_2 have been found to have good light conversion efficiency for solar radiation. The effects of the oxide layer thickness between metal and substrate were investigated. Under AMl simulated sunlight illumination the best cell has open circuit voltage Voc=0.49V, short-circuit current I_sc=26.4㎃, fill-factor: FF=0.72 and conversion efficiency η=9.3%.

가토 편측 악관절원판 제거후 악관절 과두에서 S-100 단백 변화에 관한 실험적 연구

이충원,김경욱,허균행 단국대학교 치의학연구소 1995 단국대치의학연구소논문집 Vol.7 No.1

구리와 철분말의 사출성형 및 소결

이혁기,이동희,장경옥 연세대학교 산업기술연구소 1991 논문집 Vol.23 No.2

The mixtures of Cu or Fe powders and microcrystalline wax as binder were extruded into the long wire by metal injection molding method and sintered after debinding at different conditions. In the case of coarse(33㎛) and irregular Cu powders, the mixture containing 50 vol% wax was suitable for the uniform mixing and forming when injected at 70℃. Binder in coarse Cu powder mixtures was removed at 300℃ for 10 hours. On the other hand, for the spherical and fine Fe powders(4㎛) 30 vol% wax was appropriate and 78% of wax was removed at 400℃ for 1 hour. The density of sintered Cu specimens reached up to 73% of full density when sintered at 1000℃ for 1 hour, but that of Fe specimens was observed to be as high as 97% when sintered at 1200℃ for 1 hour after the optimum debinding.