임신부의 인플루엔자 백신 접종률 및 관련요인

김미정,이승연,이광수,김아름,손동욱,정문현,박신구,박지현,이병익,이진수 대한감염학회 2009 감염과 화학요법 Vol.41 No.6

Background : During seasonal influenza epidemics and previous pandemics, pregnant women have been at increased risk for complications related to influenza infection. Although influenza vaccination has been widely recommended to pregnant women and immunocompromised hosts, the vaccination rate is presumed to be low in pregnant women. This study was aimed to evaluate the vaccination rate and factors associated with Influenza vaccination among pregnant women, who are at high risk for developing complications from the influenza. Materials and Methods : This study was carried out by telephone survey from April, 2007 to August, 2007. Women who were in their second trimester of pregnancy or above,- during October, 2006 and February, 2007, the recommended vaccination period, and had given birth at Inha University Hospital were selected as the study population. Immunization status, general understanding, and factors associated with vaccination were evaluated. Results : Among a total of 506 eligible pregnant women, 227 (44.8%) responded to the questionnaires. The influenza vaccination rate among the pregnant women was only 4% (9/227). Major reasons for not receiving vaccination were first, not awaring the necessity of immunization during pregnancy (48.5%, 110/227) and second, misunderstanding that it is prohibited during pregnancy (36.1%, 82/227). The major factors that influenced the compliance of vaccination were correct understanding and doctor's recommendation on the influenza immunization during pregnancy. Conclusions : The influenza vaccine coverage on pregnant women was very low and the awareness of influenza vaccination during pregnancy in general was inaccurate. Shift in perception is required and this can be achieved by educating the pregnant women on the safety and efficacy of vaccination. In addition, doctors' active encouragement to vaccination is highly recommended.

양측성 다낭종신 태아의 중반기 중절 1례

손대언,송창훈,한세준,이미자,기근홍 조선대학교 1994 The Medical Journal of Chosun University Vol.19 No.2

Recently, the use of Ultrasonography as a diagnostic method in detection of fetalanomalies during pregnancy has been increased because of the safety. Many fetal genitourinary anomalies were reported as early as mid trimester by transabdomonal sonography. We experienced a case of bilateral polycystic kidney in 23th months gestatational aged fetus, diagnosed by transabdominal ultrasonography and pathologic authopsy.

복합레진 수복 시 재접착 술식이 미세누출에 미치는 영향

이미애,서덕규,손호현,조병훈 大韓齒科保存學會 2010 Restorative Dentistry & Endodontics Vol.35 No.3

복합레진 수복시, 일반적으로 연마, 산부식, 수세 및 건조 단계를 거쳐 저점도 레진을 적용하는 재접착 술식을 통해 예상되는 수축간극을 봉쇄한다. 그러나, 이 과정은 재접착제 적용 이전에 물이나 잔사가 간극을 매워버릴 수 있어 그 효과가 의심된다. 본 실험에서는 연마 단계 이전, 즉 복합레진을 중합한 직후에 재접착제를 도포한다면 변연누출을 더 줄일 수 있을 것이라는 가설을 검증하고자 하였다. 실험을 위해 35개의 발거한 대구치에서 협면과 설면에 교합면 변연은 법랑질에, 치은측 변연은 상아질에 위치하는 5급 와동을 형성하였다. 와동은 Z250 (3M ESPE, USA)로 충전하였고, 접착제로는 AdperTM Single Bond 2(3M ESPE)을 사용하였다. 재접착제로는 Biscover LV (Bisco, USA) 레진 전색제와 ScotchBond Multi-purpose system(3M ESPE)의 접착제, 및 점도가 낮은 실험용 접착제를 연마 전 또는 일련의 연마 및 산부식 후 수복물의 변연에 적용하였다. 2% 메틸렌 블루 용액에 네 시간 동안 침적한 뒤 교합측 및 치은측 변연에서의 색소 침투 깊이를 광학 입체 현미경으로 측정하였다. 재접착제의 점도와 변연미세누출의 상관관계도 평가하였다. 재접착 술식, 재접착제, 및 변연의 위치, 그 각각에서는 통계적으로 유의한 차이를 관찰할 수 없었다. 그러나, 재접착 술식을 시행하지 않은 대조군의 경우에는 세 가지 재접착제를 사용한 재접착군에 비해 치은측 변연에서 미세누출이 통계적으로 유의하게 크게 나타났다(p < 0.05). 대조군과 재접착군의 미세누출의 차이는 교합측 변연에서는 관찰되지 않았다. 연마 및 산부식 후 치은변연에 재접착제를 적용한 경우에서 약한 음의 상관관계(r = -0.326, p = 0.041)를 보인 경우를 제외하고는, 재접착제의 점도와 미세누출은 유의한 상관관계를 보이지 않았다. During a composite resin restoration, an anticipating contraction gap is usually tried to seal with low-viscosity resin after successive polishing, etching, rinsing and drying steps, which as a whole is called rebonding procedure. However, the gap might already have been filled with water or debris before applying the sealing resin. We hypothesized that microleakage would decrease if the rebonding agent was applied before the polishing step, i.e., immediately after curing composite resin. On the buccal and lingual surfaces of 35 extracted human molar teeth, class V cavities were prepared withthe occlusal margin in enamel and the gingival margin in dentin. They were restored with a hybrid composite resin Z250 (3M ESPE, USA) using an adhesive AdperTM Single Bond 2 (3M ESPE). As rebonding agents, BisCover LV (Bisco, USA), ScotchBond Multi-Purpose adhesive (3M ESPE) and an experimental adhesive were applied on the restoration margins before polishing step or after successive polishing and etching steps. The infiltration depth of 2% methylene blue into the margin was measured using an optical stereomicroscope. The correlation between viscosity of rebonding agents and mciroleakage was also evaluated. There were no statistically significant differences in the microleakage within the rebonding procedures, within the rebonding agents, and within the margins. However, when the restorations were not rebonded, the microleakage at gingival margin was significantly higher than those groups rebonded with 3 agents (p < 0.05). The difference was not observed at the occlusal margin. No significant correlation was found between viscosity of rebonding agents and microleakage, except very weak correlation in case of rebonding after polishing and etching at gingival margin (r = -0.326, p = 0.041).

Pseudomonas sp. EL-G527에 의한 환경친화성 생물계면활성제의 생산최적조건

차미선,임은경,이근희,조순자,손흥주,이상준 한국환경과학회 2002 한국환경과학회지 Vol.11 No.3

A biosurfactant-producing microorganism was isolated from activated sludge by enrichment culture when grown on a minimal salt medium containing n-hexadecane as a sole carbon source. This microorganism was identified as Pseudomonas sp. and it was named Pseudomonas sp. EL-G527. It's optimal culture condition is 2% n-hexadecane, 0.2% NH_4NO_3, 0.3% KH_2PO_4, 0.3% K_2HPO_4, 0.02% MgSO_4·7H_2O, 0.0025% CaCl_2·6H_2O, 0.0015% FeSO_4·7H_2O in 1ℓ distilled water and initial pH 7.0. Cultivation was initiated with a 2% inoculum obtained from starter cultures grown in 30 ㎖ of the same medium in 250 ㎖ flask. They were cultivated at 30 ℃ in reciprocal shaking incubator and the highest biosurfactant production was observed after 4 days.

원유의 미생물적 유화

차미선,손홍주,이건,고명선,이상준,이종근 부산대학교 환경문제연구소 1996 環境硏究報 Vol.14 No.1

Microorganisms producing bioemulsifier were isolated from the sea water in Pusan costal aera. The isolated strain which had the highest emulsification activity and stability was identified as the genus Acinetobacter from the results of morphological, cultural and biochemical tests and named Acinetobacter sp. EL-C6 for convinience. The compositions of optimum medium for emulsification of crude oil by Acinetobacter sp. EL-C6 were crude oil 2%, NH_4NO_3 0.2%, K_2HPO_4 0.01%, MgSO_4·7H_2O 1%, CaCl_2·2H_2O 0.1%, NaCl 3% and the initial pH 7.5. The cultivation for emulsification of crude oil was carried out in 500m1 shaking flask containing 100m1 of the optimum medium at 30℃. The highest emulsification was observed after 5 days. The utilization on the various hydrocarbon of the Acinetobacter sp. EL-C6 was showed that the utilization of n-alkane compounds were better than that of aromatic compounds. Among the petroleum compounds, by Acinetobacter sp. EL-06.

구치부 2급와동에 있어 심미성 수복물의 변연접합도에 관한 연구

유미경,이광원,손호현 全北大學校 齒醫學硏究所 1993 전북치대논문집 Vol.11 No.1

The purpose of this study was to evaluate the cervical marginal adaptation of direst composite resin, composite resin, composite resin inlay and porcelain inlay technique. 40 cavities of class Ⅱ were prepared 40 extracted maxillary premolr teeth, which were divided into four groups. Group 1 : restored by direct filling method(P50) Group 2 : restored by direct filling method(Z100) Group 3 : restored by resin inlay method(Estilux posterior CVS) Group 4 : restored by procelain inlay method(Vita-dur N) All the specimens were embedded into stainless steel mold after thermocycling between 5℃ and 55℃. Phototaking under microscopic image and measuring the marginal gap on the photographs and statistical analysis were peformed Specimens from each group were cut mesio-distally and observed under SEM. The results were as follows : 1. The groups restored by inlay method showed significantly less marginal gap than groups restored by direct filling method(P<0.05). 2. There was no significant difference in marginal gap between composite resin inlay group with porcelain inlay group(P>0.05). 3. The group restored by direct filling method(Z100) showed significantly less marginal gap than group restored by direct filling method(P5O)(P<0.05). 4. SEM examination indicated that direct composite resin groups were larger gaps(10- l5μm) than groups(2-5μm).

부산지역 수돗물과 지하수의 중금속 농도

김준연,손지언,김형수,김두희,원미숙,김인식,이혜령 동아대학교 산업의학연구소 2000 산업의학연구소 논총 Vol.- No.5

This study investigated mean airborne CO concention of 15 workplaces, suspected of CO exposure and conducted self-reported questionnaire completion and indirect COHb concentration measure using Micro II Smokerlyzer to healthy 702 adult subjects from 1999 May to 1999 September in order to find a relation of CO exposure and occupational factors, socioeconomic factors, and health related behaviors and confirm the related conditions in the screening test for CO exposure. The results of this study were summarized as follows : 1. In the CO exposed and non exposed group, COHb concentrations of the smokers were 2.55±0.96% and 2.21±0.97% and that got a statistically significant difference, There were not statistically significant differences in the age and total smoking index. Passed times after the last smoking, Working time/day, and working duration were statistically significant difference (p〈0.05). 2. In the CO exposed and non exposed group, COHb concentrations of non-smoking group were 0.94±0.35% and 0.68±0.47% and that got a statistically significant difference. There were not statistically significant differences in the age and working duration but Working time/day was a statistically significant difference(p〈0.05). 3. In the CO exposed group, r-square of multiple regression of the smokers was 38.5 % and passed time after the last smoking, working time/day, and job category were statistically significant differences (p〈0.05). And r-square in the CO non-exposed group was 38.3 % and age, passed time after the last smoking, and total smoking index were statistically significant difference. 4. In the CO exposed group, r-square of multiple repression of the non-smokers was 66.3% and job category and airborne CO concentration were statistically significant differences(p〈0.05). But r-square of non-smokers in the CO non-exposed group was 1.0% and there was not a statistically significant difference(p〈0.05). 5. In the smokers of CO exposed and non exposed groups, relation of COHb concentration and passed time after the last smoking was expressed as exponential function, Y = 2.9182e-0.0083x and r-square of this function was 37.4%. Therefore it was more than 150 minutes that passed time after the last smoking was when COHb concentrations were measured as less than 1%. In conclusion, variable, that was statistically significant to COHb concentraion in the both CO exposed and non-exposed smokers, was a passed time after the last smoking. We suggest that you have to restrict the smoking of smokers at least 150 minutes in the exposed and non exposed group before COHb concentration measure in order to exclude smoking effects

CAD/CAM 으로 제작된 Ceramic Inlay의 변연누출에 관한 비교연구

조병훈,이명종,임미경,이광원,손호현 大韓齒科保存學會 1997 Restorative Dentistry & Endodontics Vol.22 No.2

To compare the marginal leakage of CAD/CAM-fabricated ceramic inlay, gold inlay and amalgam, forty extracted caries-free premolars were prepared with Class Ⅱ MO cavity design. The teeth were divided into four groups of ten samples each. Group 1 was restored with CAD/CAM-fabricated ceramic inlays cemented with Scotchbond Resin Cement / Scotchbond Multi-purpose plus. Group 2 was restored with gold inlays cemented with Scotchbond Resin Cement / Scotchbond Multi-purpose plus. Group 3 was restored with gold inlays cemented with zinc phosphate cement. And, Group 4 was restored with amalgam. All samples were thermocycled, and stored in 1% methylene blue. Marginal leakage was examined at four margins, that is, occlusal distal, priximal gingival, occlsal facial and occlusal lingual margins from sectioned samples under steeomicroscope(x15). The results were as follows: 1. Group 1 and 2 showed no statistically significant difference among marginal leakage at all four examined margins(p>0.05). 2. Group 3 and 4 showed significant marginal leakage at proximal gingival margin compared with other margins(p<0.05). 3. Significantly increased marginal leakage at priximal gingival, occlusal facial and occlusal lingual margins in group 3 were observed compared with other groups(p<0.05).

인터넷신문 이용자의 만족요인 연구 : 대학생 이용자 집단을 중심으로

나승안,손경수,이미영,이형탁 연세대학교 언론연구소 2000 언론 사회 문화 Vol.- No.8

일괄공정 압저항혈 압력센서의 특성

서희돈,이동원,손미정,최세곤 嶺南大學校 工業技術硏究所 1998 工業技術硏究所論文集 Vol.26 No.1

This paper describes structural characteristics of three kinds of piezoresistive pressure sensors, which include wheatstone-bridge type, center-boss type and single-element type, fabricated on one-chip by batch process. In order to optimize device dimensions with respect to the desired characteristics, analytical formula and finited-element modeling(FEM) are used in design process. In experiments the pressure sensitivity of wheatstone-bridge type is about 2.2㎷/V·㎪. The fabricated center-boss pressure sensor has improved in the characteristics as linearity at low pressure, and sensitivity is about 2.415㎷/V·㎪. In single-element type with a four-terminal gauge using shear stress, the maximum sensitivity about 0.4㎷/V·㎪ appeared at the center of the diaphragm with the 3:1 of the length : width ratio. this type is very appropriate method to minimize the temperature dependance of the offset voltage and sensitivity, because the fabricated sensors reduce the offset of themal stress and mismatch of piezoresistros as compared with the wheatstone-bridge type.