급성 골수성 백혈병 환자에서 G-CSF를 포함한 고용량 화학요법 후 자가 말초혈 조혈모세포이식의 효과

김병수,국훈,황태주,최철원,김준석,Kim, Byung Soo,Kook, Hoon,Hwang, Tai Ju,Choi, Chul Won,Kim, Jun Suk 대한면역학회 2002 Immune Network Vol.2 No.1

Background: The possibility that G-CSF recruits leukemic cells from the G0 to S phase, which may lead to a greater susceptibility to cytotoxic drugs, such as ara-C, has been presented in Harada's study. Methods: In this study, we referred to the protocol of Harada et al 1 to try G-CSF combined marrow-ablative chemotherapy and autologous PBSCT, for the treatment of AML patients in CR1 status. Between January 1997 and March 1998, six AML patients (3: children, 3: adults) in CR1 status were autografted and followed up to 3 years. Results: The major regimen related toxicity was composed of mucositis and diarrhea without death. The time of ANC recovery to 500/L and 1,000/L was 11~48 and 16~81 days, respectively. The mean time of platelet recovery to 20,000/L and 50,000/L was 21~233 and 35~370 days, respectively. The platelet recovery time to 50,000/L was markedly prolonged for more than 100 days in four patients (66.7%). Moreover, four patients (66.7%) experienced a relapse of leukemia after transplantation, with a mean interval of 147.5 days after PBSCT. Two patients were in CR status for 53 and 51 months after PBSCT, respectively. Conclusion: The G-CSF combined marrow-ablative chemotherapy and autologous PBSCT resulted in a markedly delayed platelet recovery and no advantages for decreasing the relapse rate of AML. But, further studies will be warranted.

전자선 치료 시 Bolus를 적용한 경우 표면선량의 Treatment Planning System(TPS) 계산 값과 실제 측정값의 비교

김병수,박주영,박병석,송용민,박병수,송기원,Kim, Byeong Soo,Park, Ju Young,Park, Byoung Suk,Song, Yong Min,Park, Byung Soo,Song, Ki Weon 대한방사선치료학회 2014 대한방사선치료학회지 Vol.26 No.2

목 적 : 표재성 종양 치료를 위하여 선택한 전자선은 bolus와 동시에 사용할 경우 표면선량에 급격한 변화를 보이게 되며 이는 치료결과의 중요한 변수로 작용할 수 있다. 이에 본 논문에서는 전자선 치료에서 bolus가 적용될 경우 표면선량을 좌우할 수 있는 4 가지 변수에 따른 치료계획시스템(Treatment Planning System, TPS)의 표면선량 계산 값과 실제 측정값을 비교 분석하였다. 대상 및 방법 : 치료계획시스템(Pinnacle 9.2, philips, USA)과 실제 측정값을 비교하기 위하여 실제 치료 시 주로 발생되는 4가지 변수(A: bolus 두께 - 3, 5, 10 mm, B: 조사야 크기 - $6{\time}6$, $10{\time}10$, $15{\time}15cm2$, C: 에너지 - 6, 9, 12 MeV, D: 겐트리 각도 - 0, $15^{\circ}$)를 설정하였다. 16 cm 두께의 solid water phantom을 이용하여 bolus(Action Products, USA) 없이 전산화단층촬영(lightspeed ultra 16, General Electric, USA)을 시행하였고 치료 계획은 TPS 상에서 각각 3, 5, 10 mm bolus를 생성하여 A, B, C, D를 조합한 총 54개의 beam으로 계획하였다. 이때 SSD 100 cm, 300 MU를 조사하였고 TPS와 실제 측정값을 비교 분석하기 위해 EBT3 film(International Specialty Products, NJ, USA)을 이용해 iso-center에 위치시켜 2회 반복 측정하였다. 측정된 film은 디지털 평판 스캐너(Expression 10000XL, EPSON, USA)와 선량 농도 분석시스템(Complete Version 6.1, RIT, USA)을 사용하여 각각의 평균값과 표준편차 값으로 분석하였다. 결 과 : bolus 두께에 따른 값은 3, 5, 10 mm에서 실제 측정된 값이 TPS의 계산 값보다 각각 101.41%, 99.58%, 101.28%, 표준편차는 각각 0.0219, 0.0115, 0.0190 으로 나타났다. 조사야 크기에 따른 실제 측정값은 $6{\time}6$, $10{\time}10$, $15{\time}15cm2$ 각각 계산 값에 비해 99.63%, 101.40%, 101.24%, 표준편차는 0.0138, 0.0176, 0.0220 으로 나타났다. 에너지에 따른 값은 상대적으로 6, 9, 12 MeV 각각 99.72%, 100.60%, 101.96%, 표준편차는 0.0200, 0.0160, 0.0164로 나타났다. 빔 각도에 따른 실제 측정값은 계산된 값에 비하여 0, $15^{\circ}$에서 각각 100.45%, 101.07%, 표준편차는 0.0199, 0.0190 으로써 $15^{\circ}$에서 $0^{\circ}$보다 0.62% 높게 측정되었다. 결 론 : 본 논문에서 사용한 변수에 따른 계산 값과 측정값을 분석한 결과 5 mm bolus, $6{\time}6cm2$ 조사야, 저 에너지 전자선, $0^{\circ}$ 겐트리 각도에서 TPS로 계산한 값이 측정값에 더 가까웠지만 다른 변수를 적용한 비교에서도 최대 2% 오차범위 내에 포함되는 결과를 보였다. 전자선과 bolus를 동시에 사용하는 경우 본 논문에서 선택된 변수의 범위를 벗어난다면 각각의 변수에 따라 실제 측정값이 TPS와 달라질 수 있기 때문에 정확한 표면선량에 대한 QA를 반드시 실시해야 한다. Purpose : If electron, chosen for superficial oncotherapy, was applied with bolus, it could work as an important factor to a therapy result by showing a drastic change in surface dose. Hence the calculation value and the actual measurement value of surface dose of Treatment Planning System (TPS) according to four variables influencing surface dose when using bolus on an electron therapy were compared and analyzed in this paper. Materials and Methods : Four variables which frequently occur during the actual therapies (A: bolus thickness - 3, 5, 10 mm, B: field size - $6{\time}6$, $10{\time}10$, $15{\time}15cm2$, C: energy - 6, 9, 12 MeV, D: gantry angle - $0^{\circ}$, $15^{\circ}$) were set to compare the actual measurement value with TPS(Pinnacle 9.2, philips, USA). A computed tomography (lightspeed ultra 16, General Electric, USA) was performed using 16 cm-thick solid water phantom without bolus and total 54 beams where A, B, C, and D were combined after creating 3, 5 and 10 mm bolus on TPS were planned for a therapy. At this moment SSD 100 cm, 300 MU was investigated and measured twice repeatedly by placing it on iso-center by using EBT3 film(International Specialty Products, NJ, USA) to compare and analyze the actual measurement value and TPS. Measured film was analyzed with each average value and standard deviation value using digital flat bed scanner (Expression 10000XL, EPSON, USA) and dose density analyzing system (Complete Version 6.1, RIT, USA). Results : For the values according to the thickness of bolus, the actual measured values for 3, 5 and 10 mm were 101.41%, 99.58% and 101.28% higher respectively than the calculation values of TPS and the standard deviations were 0.0219, 0.0115 and 0.0190 respectively. The actual values according to the field size were $6{\time}6$, $10{\time}10$ and $15{\time}15cm2$ which were 99.63%, 101.40% and 101.24% higher respectively than the calculation values and the standard deviations were 0.0138, 0.0176 and 0.0220. The values according to energy were 6, 9, and 12 MeV which were 99.72%, 100.60% and 101.96% higher respectively and the standard deviations were 0.0200, 0.0160 and 0.0164. The actual measurement value according to beam angle were measured 100.45% and 101.07% higher at $0^{\circ}$ and $15^{\circ}$ respectively and standard deviations were 0.0199 and 0.0190 so they were measured 0.62% higher at $15^{\circ}$ than $0^{\circ}$. Conclusion : As a result of analyzing the calculation value of TPS and measurement value according to the used variables in this paper, the values calculated with TPS on 5 mm bolus, $6{\time}6cm2$ field size and low-energy electron at $0^{\circ}$ gantry angle were closer to the measured values, however, it showed a modest difference within the error bound of maximum 2%. If it was beyond the bounds of variables selected in this paper using electron and bolus simultaneously, the actual measurement value could differ from TPS according to each variable, therefore QA for the accurate surface dose would have to be performed.

M&S를 활용한 유도탄 검사주기 및 수량 설정 방안

김병수,이계신,김동석,문기성,Kim, Byung-Soo,Lee, Kye-Shin,Kim, Dong-Seok,Moon, Ki-Sung 한국시뮬레이션학회 2009 한국시뮬레이션학회 논문지 Vol.18 No.4

In this study, we presented the periodic inspection method of the Certified Missile Round Concepts usuing M&S(Modeling and Simulation) techniques. Firstly, We drew up the scenario from the application concepts and the predicted dormant reliability Secondly, we performed the modeling for a simulation program based on the scenario. Lastly we embodied the simulation program. After comparing and examining the difference between the simulation results and the theoretical estimates, we present the best periodic inspection plan for achieving the probability of success.

양극성 경향과 스트레스 취약성:기분장애설문지 양성 반응군과 음성 반응군에서 지각된 스트레스, A형 행동, 그리고 생활습관의 비교

김병수,김성윤,최재원,주연호,윤대현,한내진,김유신,김선옥,Kim, Byung-Su,Kim, Seong-Yoon,Choe, Jae-Won,Joo, Yeon-Ho,Yoon, Dae-Hyun,Han, Nae-Jin,Kim, Yoo-Shin,Kim, Seon-Ok 한국정신신체의학회 2010 정신신체의학 Vol.18 No.1

연구목적 : 본 연구를 통해 양극성 장애 I형 혹은 II형 진단 기준에는 부합하지 않지만, (경)조증적 성향 혹은 기분 불안정성 등의 양극성 경향(bipolar tendency, bipolarity)을 가진 사람에게서, 주관적으로 지각하는 스트레스 수준, 스트레스 취약성을 반영하는 것으로 알려진 A형 행동 유형(Type A Behavior Pattern, TABP), 그리고 건강하지 못한 생활습관의 위험이 증가되어 있는지 확인하고자 한다. 방 법 : 정신과적 병력이 없는 30세 이상의 1987명의 연구 대상군이 분석에 포함되었다. 이들 중에서 기분장애설문지 (Mood Disorder Questionnaire, MDQ)의 (경)조증적 증상 경험에 대한 13개 항목 중에서 7개 항목에 "예"라고 응답한 사람들을 양극성 경향군으로 분류하였다. 양극성 경향군과 비양극성 경향군 사이에서 지각된 스트레스 척도(Perceived stress scale, PSS), TABP를 반영하는 A/B 생활 습관 설문(A/B Lifestyle ques-tionnaire) 점수와, 음주, 흡연, 불규칙적인 식사, 운동 부족 등의 생활 습관 변인을 비교하였다. 결 과 : 양극성 경향군(329명, 16.6%)은 비양극성 경향군에 비해 TABP를 반영하는 A/B 생활 습관 설문의 총 점수가 유의미하게 높았으며(125.4점 vs. 115.9점, p<0.001), TABP로 판정(총 점수 135점 이상)된 비율도 양극성 경향군에서 유의미하게 높은 것으로 관찰되었다(41.3% vs. 30.1%, p<0.001). 주관적으로 지각하는 스트레스 수준의 비교에서도, 양극성 경향군이 비양극성 경향군에 비해 유의미하게 높았다(18.5 vs. 16.5, p<0.001). 생활습관의 비교에서 '불규칙적인 식사'(20.1% vs. 14.3%, p=0.002), '주 4회 이상 음주'(29.8% vs. 16.5%, p<0.001), '현재 흡연'(41.9% vs. 23.0%, p<0.001), '주 2회 이하 운동'(63.2% vs. 55.1%, p=0.007) 이라고 응답한 사람의 비율이 양극성 경향군에서 유의미하게 높았다. 결 론 : 양극성 경향을 가진 경우는 스트레스에 취약한 행동 양상이 높게 관찰되고, 주관적으로 지각하는 스트레스 수준도 높고 흡연, 음주, 불규칙한 식사와 운동 부족과 같은 건강하지 못한 생활 습관을 가지고 있을 위험도 높은 것으로 확인되었다. 이러한 위험 요소들은 비만, 대사증후군, 당뇨, 그리고 심혈관계 질환의 발병 위험을 높일 수 있으므로, 양극성 경향을 가진 사람들은 스트레스 관리 및 건강한 생활 습관을 유지하기 위한 보다 적극적인 노력이 필요하다. Objectives:Authors hypothesized that bipolar tendency of non-psychiatric person would be associated with stress vulnerability. To test the hypothesis, we compared perceived stress level, Type A Behavioral Pattern (TABP) and unhealthy lifestyle between person with and without bipolar tendency. Methods:The study cohort consisted of 1987 subjects without past and current psychiatric history. In this study, bipolar tendency was determined by MDQ response which requires endorsement of at least 7 of the 13 "yes or no" questions. We compared the scores of Perceived Stress Scale, A/B lifestyle questionnaire, and unhealthy lifestyle(alcohol, smoking, lack of exercise, irregular meal) between MDQ positive and negative respondents. Results:We identified the bipolar tendency group determined by the MDQ positive response were 329 subjects(16.6%). The overall score of the bipolar tendency group was significantly high on the A/B lifestyle questionnaire compared to the non-bipolar tendency group(125.4 vs. 115.9, p<0.001), and the rate of the subjects defined as TABP was also significantly high(41.3% vs. 30.1%, p<0.001). In comparison of subjectively perceived stress level, the bipolar tendency group was observed to be significantly higher than the non-bipolar tendency group (18.5% vs. 16.5%, p<0.001). The bipolar tendency group was significantly higher than the non-bipolar tendency group on the rate of answering:'irregular eating habit' (20.1% vs. 14.3%, p=0.002), '4-or-more-times alcohol intake per week' (29.8% vs. 16.5%, p<0.001), 'currently smoking' (41.9% vs. 23.0%, p<0.001), '2-or-less-times physical exercises per week' (63.2% vs. 55.1%, p=0.007). Conclusion:By clinical diagnosis, even a person who does not meet the criteria of bipolar disorder has a high risk of stress-related behavioral pattern, and perceived stress when possessing bipolar tendencies such as the (hypo) maniac tendency or affective instability. Such individual has significantly higher risk of having unhealthy life-style such as smoking, drinking, irregular eating habit and lack of exercise compared to non-bipolar tendency group. Since these risk factors lead to increase the risk of obesity, metabolic syndrome, diabetes, and cardiovascular diseases, the individual with the bipolar tendency requires a more effort to manage stress and to maintain healthy lifestyle.

도시광석(都市鑛石) 재자원화(再資源化)를 위한 건식공정(乾式工程)의 현황(現況)

김병수,이재천,신도연,정진기,이강인,손정수,양동효,김민석,김수경,Kim, Byung-Su,Lee, Jae-Chun,Shin, Do-Yeoun,Jeoung, Jin-Ki,Rhee, Kang-In,Sohn, Jeong-Soo,Yang, Dong-Hyo,Kim, Min-Seuk,Kim, Soo-Kyung 한국자원리싸이클링학회 2012 資源 리싸이클링 Vol.21 No.2

유한자원의 순환활용과 환경보전 관점에서 도시광석으로부터 산업원료로 재사용될 수 있는 금, 은, 팔라듐 및 구리, 주석, 니켈, 코발트, 리튬 등 유용금속의 회수는 매우 중요하다. 현재까지 도시광석으로부터 유용금속을 회수하기 위한 많은 공정이 개발되었으며, 그 중 일부는 상업적으로 가동되고 있다. 본 논문에서는 문헌을 통하여 조사된 도시광석으로부터 산업원료로 사용되는 유용금속을 재생하기 위하여 개발된 중요한 건식공정들을 간략히 소개하고자 한다. In the points of the environmental conservation and the recirculating utilization of limited resources, it is very important to recover valuable metals like Au, Ag, Pd, Cu, Sn, Ni, Co, and Li used as industrial raw materials from urban ores. From now, many processes have been developed for recovering the valuable metals contained in urban ores and some of them have been operated commercially. In the paper, pyrometallurgical processes developed for reclaiming valuable metals from urban ores will be briefly introduced.

2차원 전기영동법을 이용한 Brucella abortus 세포외막 특이단백질의 분석

김병수,김선희,김종석,백병걸,Kim, Byung-su,Kim, Sun-hee,Kim, Jong-suk,Baek, Byeong-kirl 대한수의학회 1998 大韓獸醫學會誌 Vol.38 No.2

Outer membrane proteins(OMPs) of Brucella abortus 1119-3 strain were extracted by Triton X-100 treatment, and fractionated by DEAE-cellulose column chromatography and Sephacryl S-300 column chromatography. The antigenic proteins in these fractions were identified by Western blot analysis. In Western blot analysis, a single band(38kDa) was observed in the DEAE fractions from 36th fraction to 38th fraction against sera of cattle infected with B abortus. And other fractions have several bands. However, the Sephacryl S-300 fractions exhibited a total of 3 peaks of proteins with a broad range from about 30 to 116kDa. In order to characterize further, the extracted OMPs and the DEAE fractions were analyzed by two dimensional polyacrylamide gel electrophoresis(2-DE) and Western blot using serum from naturally infected cattle with Brucella spp. The 2-DE immunoblots of DEAE fraction showed immunoreactive spots more than twenty two. The major protein spots have ranging from about 32 to 47kDa. The pI values of the spots were detected from pH 4.7 to 5.4. Among the major protein spots, the 38kDa protein which is a specific antigen, located at the point of approximately a pI 4.8.

시각 장애자를 위한 이동 로봇의 주행 시스템 설계

김병수,장원석,홍승홍,Kim, Byung-Soo,Chang, Won-Suk,Hong, Seung-Hong 대한의용생체공학회 1987 의공학회지 Vol.8 No.1

This paper designed LOCOMOTION SYSTEM of a mobile robot for the blind guidance and LOCOMOTION COMMAND SYSTEM that gave the moving path to the locomotion system. This system analyzed COMMAND and calculated the speed and direction of the robot. And during locomotion it measured wheel's rotation number for the position and speed control. Also, this system was considered about the 110 interface with host computer and the locomotion method for the blind. In the locomotion experiment the standard speed of robot was 0.4m/sec and the locomotion error was below 5%

폐동(廢銅)슬래그를 활용(活用)한 폐전기전자(廢電氣電子) 스크랩으로부터 유가금속(有價金屬) 고온용융추출(高溫鎔融抽出) 공정(工程) 개발(開發)

김병수,이재천,이광호,Kim, Byung-Su,Lee, Jae-Chun,Lee, Kwang-Ho 한국자원리싸이클링학회 2007 資源 리싸이클링 Vol.16 No.3

구리, 주석 등의 유가금속을 다량 함유하고 있는 폐전기전자 스크랩으로부터 유가금속을 회수하는 것은 자원 재활용 측면에서 매우 중요하다. 본 연구에서는 폐동슬래그를 슬래그 형성제로 활용하여 폐전기전자 스크랩으로부터 유가금속을 추출하기 위한 새로운 공정이 제시되었다. 제안된 공정은 슬래그 형성제로 동 제련소에서 배출되는 폐동슬래그를 재활용한다는 장점이 있다. 각 실험에서는 일정한 비율로 혼합된 폐전기전자 스크랩과 폐동슬래그의 혼합시료를 보조 슬래그 형성제인 CaO와 함께 고온 용융되었다. 실험 결과 폐전기전자 스크랩에 함유된 구리와 주석이 Cu-Fe-Sn 합금상으로 각각 95% 이상, 85% 이상 추출되었다. It is very important in the view point of resource recycling to recover valuable metals such as copper and tin from waste electric and electronic scrap. The waste electric and electronic scrap contains significant amounts of copper, tin, and so on. In this study, a new process for extracting copper and tin contained in the waste electric and electronic scrap using waste copper slag which is generated from the melting furnace of copper smelter was presented. Advantage of the proposed process is to reuse waste copper slag instead of new fluxes as slag formatives. In each experiment, the waste electric and electronic scrap and waste copper slag were melted inputting suitable amount of CaO as an additional flux. Up to 95% of copper and 85% of tin in the raw material were extracted in a Cu-Fe-Sn alloy phase.

Ca 첨가가 PTCR 써미스터의 전기적 특성에 미치는 영향

김병수,김종택,김철수,김용혁,이덕출,Kim, Byung-Su,Kim, Jong-Taek,Kim, Chul-Soo,Kim, Yong-Huck,Lee, Duck-Chool 한국전기전자재료학회 1998 전기전자재료학회논문지 Vol.11 No.2

In this paper, to develop PTCR(Positive Temperature Coefficient of Resistance) thermistor with high withstanding voltage, Ca were added to. the compositions of $(Ba_{0.9165-X}-Sr_{0.08}-Ca_X-Y_{0.0035})TiO_3+MnO_2$ 0.02wt%+$SiO_2$ 0.5wt%. the effects of Ca additions were researched according the increasing of Ca from 0[mol%] to 20[mol%], and the electrical properties were investigated. As increasing Ca additions from 0[mol%] to 20[mol%], the grain size of the specimens was reduced from 11.1[${\mu}m$] to 6.15[${\mu}m$], and also the sintered density was reduced from 5.43[$g/cm^3$] to 5.05[$g/cm^3$] and their the breakdown voltages were increased from 163[V/mm] to 232[V/mm]. It is shown that the breakdown voltage was increased with amount of Ca additions.

C-FVM을 이용한 토공장비의 CO₂ 배출계수에 관한 연구

김병수,Kim, Byung-Soo 대한토목학회 2014 대한토목학회논문집 Vol.34 No.3

국토해양부에서 2011년 시설물별 탄소배출량 산정가이드라인을 통해 제시한 토공장비의 $CO_2$ 배출계수는 IPCC 탄소배출계수를 활용하여 연료사용량을 기반으로 만들어졌다. 하지만 이 방식은 현장의 다양한 조건을 반영하지 못한다는 단점이 있다. 따라서 이러한 단점을 보완한 새로운 배출계수가 필요하다. 본 연구에서는 토공장비를 대상으로 농도-유속측정(C-FVM)을 이용한 직접측정방식으로 $CO_2$ 배출량을 산정하고, 국토해양부에서 제시한 배출계수와 비교분석 후 토공장비의 새로운 $CO_2$ 배출계수를 제시하고자 한다. $CO_2$ emission factor for earthwork equipment was made based on fuel consumption quantity using IPCC carbon emission factor. This is presented through the carbon emission estimating guideline each facilities by the Ministry of Land, Infrastructure and Transportation in 2011. However, this method has the defect which don't apply the various condition of site. Therefor it needs the new emission factor supplemented these defects. This study will tries to estimate $CO_2$ emission with the direct measurement method using concentration flow velocity measurement (C-FVM) for earth work equipment and present the new $CO_2$ emission factor for earth work equipment after compare with emission factor of the Ministry of Land, Infrastructure and Transportation.