생약추출물 유도형 Nitric Oxide Synthase 저해활성 검색

류재하,이소영,박재현,이화진,장세란,은진희,김남이,정연수,장미경,최영은,이숙현,손행자,안한나,고혜진 숙명여자대학교 약학연구소 2001 약학논문집-숙명여자대학교 Vol.17 No.-

Nitric Oxide (NO), derived from L-arginine, is produced by two types (constitutive and inducible) of nitric oxide synthase (NOS: cNOS and iNOS). The NO produced in large amounts by the iNOS is known to be responsible for the vasodilation and hypotension observed in septic shock and inflammation. The inhibitors of iNOS, thus, may be useful candidate for the treatment of inflammatory diseases accompanied by the overproduction of NO. We prepared alcoholic extracts of herbal drugs which have been used for the treatment of inflammation in oriental medicine. We have screened the inhibitory activity of NO production in lipopolysaccharide (LPS)-activated macrophages after the treatment of these extracts. Among the 81 kinds of extracts of herbal drugs, 34 extracts showed potent inhibitory activity of NO production above 50% at the concentration of 50 (μg/ml. The inhibitory activities of NO production were also evaluated for several solvent fractions at three different concentrations. Especially, hexane soluble fractions of Agrimonia pilosa, Hydrangea serrata, Machilus thunbergii, Prunella vulgaris, Saussurea lappa, Tussilago farfara, and ethyl acetate soluble fractions of Angelica gigas, Ostericum koreanum, Torilis japonica, Perilla frutescence showed moderate activity at 10 and/ or 25 (μg/ml. These fractions are promising candidates for the study of the activity-guided chromatographic purification of active compounds.

디지털 치료기술 산업 육성에 따른 투자와 경제적 파급효과

김재현 ( Jae-hyun Kim ),문종윤 ( Jong Youn Moon ),장지은 ( Jieun Jang ),심정연 ( Jung Yeon Sim ),신재용 ( Jaeyong Shin ) 한국보건행정학회 2020 보건행정학회지 Vol.30 No.4

The digital treatment technology industry is one of the core fostering industries of the Moon Jae-in government along with the global trend. The purpose of this study is to compare and analyze the investment and economic ripple effect on the related industries. To this end, we used the industry-related table, which is the actual measurement data for 2015 that the Bank of Korea actually measured and released every 5 years in 2019. The digital treatment technology industry was not clearly classified within Korea’s industrial classification system, so the contents of the industry-related survey were analyzed, and the digital treatment technology industry was reclassified and then analyzed. As a result of the analysis, it was analyzed that the production induction effect of the digital treatment technology-related industry in 2015 was 1.770, the value-added induction effect was 0.875, and the employment induction effect was 19.128, which was higher than that of other industries in Korea. As a result of the analysis of the economic ripple effect (scenario 1), the production inducing effect was about 370 billion won, the added value inducing effect was about 185 billion won, and the employment inducing effect was 4,044 people. The results of this study are expected to play a large role in economic revitalization as the effect of inducing production, increasing employment, and creating added value through fostering the digital treatment technology industry is expected to play a large role in activating the economy. It is expected to play a large role in providing central medical services. Therefore, it is expected that policy support for revitalizing the digital treatment technology industry through active investment support and tax benefits from the government to foster the digital treatment technology industry is necessary.

數種의 熱處理方法이 Elgiloy矯正用 線材의 腐蝕에 미치는 影響

張世敬,權五源,成在鉉 慶北大學校 齒科大學 1987 慶北齒大論文集 Vol.4 No.1

The purpose of this study was to evaluate the effect of heat treatment on corrosion properties in .016 "Green Elgiloy wire. To evaluate the corrosion resistance of Elgiloy wire, electrochemical tests such as potential and polarization measurement were used widely. In this experiment, the corrosion currents were measured using electronic potentiostat and all of the heated specimen were heat-treated by direct flame, electric welder and dental furnace. These specimens were immersed in 1% sodium chloride solution at 37℃, and currents of each specimen were measured for 24 hours at 0.0 volt(SCE) The results were as follows: Heat-treated specimens showed higher corrosion susceptibility than non heat-treated specimens. Heat-treated specimens by direct flame seemed to be higher corrosion susceptibility than those by electric welder, dental furnace. Heat-treated specimens by direct flame showed higher current density and lower corrosion potentials in respect to heattreated specimens by electric welder, dental furnace. Corrosion surface of heat-treated specimens showed pits and scratches by observation of scanntng electron microscope.

일부 소규모 시계조립 사업장의 상지 누적외상성장애의 유병률

장은철,김현주,권영준,박시복,이수진,송재철 大韓産業醫學會 2000 대한직업환경의학회지 Vol.12 No.4

목적 : 단순 반복작업을 하는 시계조립 사업장 근로자를 대상으로 상지 누적외상성장애의 자각증상 유병률과 상지 누적외상성장애 유병률을 파악하고자 하였다. 방 법 : 인구학적 특성, 상지의 자각증상, 사회심리적 요인은 자가 설문지법으로, 인간공학적 특성은 점검표를 이용한 면담법으로 조사하였다. 상지의 자각증상 조사와 사회심리적 요인은 각각, N10SH (1993) 설문지와 Karasek(1979)의 Job strain model을 번역하여 조사하였다. 상지 누적외상성장애 판정은 의사가 작업 현장에서 직접 환자 면담과 이학적 검사를 수행한 후, 연구에서 규정한 증례정의에 의해 수행하였다. 수집된 자료는 x2 teat와 exact test로 단별량 분석을 하였고, 이중 의미있는 변수와 위험 인자로 알려진 변수들로 다중 로지스틱 회귀분석을 시행하였다. 결 과 : 대상자들의 자각증상 유병률은 54.2 %였고, 부위별로는 목 34.9 %, 손/손목 31.3 %, 어깨 30.1 %, 팔/팔꿈치 18.0 %순이었다. 상지 누적외상성장애의 유병률은 45.8 %였고, 근막동통증후군이 26명으로 가장 많았고, De Quervain씨 병 8명, 수부/전완부의 건염 및 건활막영 8명, 수근관 증후군 5명, 이두건염 5명, 척골 신경병증 5명, 내상과 염 4명, 외상과염 2명, 경추 디스크 질환 2명, 흥곽 출구 증후군 1명순으로 나타났다. 단변량 분석시 자각증상 유병률은 작업부서 중 완성 부에서, 상지 누적외상성장애 유병률은 여자와 완성 부에서 통계학적으로 유의하게 높았다. 다중 로지스틱 회귀분석 결과 완성부와 근무긴장도가 높은 군이 상지 누적외상 성장애와 통계학적으로 유의한 결과를 보였다. 결 론 : 이 연구에서 상지 누적외상성장애 유병률은 45.8 %으로서 저강도의 단순 반복작업을 하는 시계조립 사업장 근로자에서도 누적외상성장애의 위험이 있는 것으로 생각된다. 또한, 사회심리적 요인과 작업 부서별 공정 및 환경이 유병률에 영향을 미치는 주요 요인으로 생각되며, 향후 이들에 관한 다양한 연구가 진행되어야 할 것이다. 산업보건 현장에서는 시계조립 사업장과 같이 저 강도의 단순 반복작업을 위주로 하는 사업장에 대한 지속적인 관심과 각 사업장별 위험요인을 파악하여 적절한 예방 및 관리 대책을 세워야 할 것이다. Objectives : The prevalence of cumulative trauma disorders of upper extremities mons watch assembly workers in small-scaled industry was studied. Methods. In 83 workers at five watch assembly factories, symptoms and psychosocial questionnaire, ergonomic Interview, physical examination were conducted. Results : Prevalence of self-reported symptoms was 54.2% and neck 34.9%, wrist/hand 31.3%, shoulder 30.1%, elbow/arm 18.0% by anatomical site. Prevalence of cumulative trauma disorders was 45.8%. Most common disease was myofascial pain syndrome (31.3%). The other diseases were De Quervain disease (9.6%), tenosynovitis/tendinitis at wrist/hand (9.6%), bicipital tendinitis(6.0%), fat. epicondylitis(4.8%), meIn. epicondylitis(2.4%), and cervical disc disease(2.4%). As result of ergonomic interview, repetitiveness was 79(98.8%). There were no differences in the prevalence of self-reported symptoms and cumulative trauma disorders for age, sex, marital status, duration of work In the study, The significant factors of cumulative trauma disorders were occupational task and psychosocial stress in the study. The prevalence of cumulative trauma disorders in high strain group was hlgher (68.4%) than other three groups. The prevalence of self-reported symptoms and cumulative trauma disorders in assembly task was higher (70.0%, 64.0%) than other two tasks. Conclusions : Prevalence of self-reported symptoms was 54.2%, prevalence of cumulative trauma disorders was 45.8% in watch assembly workers. In this study, factor related to self-reported symptoms was occupational task and factors relaxed to cumulative trauma disorders were occupational task and psychosocial stress. This results suggest that differences of ergonomics and environment in occupational task cause differences of prevalence of self-reported symptoms and cumulatlve trauma disorders.

3차원 적층패키지의 Cu-Cu 접합부의 정량적 접합강도 평가 및 향상에 관한 연구

장은정,김재원,Kim, Bioh,Thorsten Matthias,현승민,이학주,박영배 한국공작기계학회 2009 한국공작기계학회 춘계학술대회논문집 Vol.2009 No.-

The quantitative interfacial adhesion energy of Cu-Cu direct thermo-compression specimen with bonding temperature and wet pre-treatment was measured by using 4 point bending test for 3-D IC integration. The evaluated interfacial adhesion energy was 2.79±0.82, 3.46±0.87, 4.93±0.2 J/㎡ bonding temperature 300, 350, 400℃ and 0.29, 1.28, 1.64, 1.17 and 0.43 J/㎡ acetic acid pre-treatment at 35℃ for 0, 1, 5, 10, and 15 min. From the result, 5 min treated Cu to Cu thermo-compression bonding has the highest interfacial adhesion energy at 350℃.

염증이 있는 충수돌기의 초음파 진단 : 자가 위치선정법의 정확도 Accuracy of Self-localization Technique

장현정,임효근,김승훈,이민희,윤지영,김경아,임재훈,정연권 대한초음파의학회 1998 ULTRASONOGRAPHY Vol.17 No.4

인간 면역부전 바이러스(HIV) 감염자 사이에서의 1기 및 2기 매독의 유행

장희창,조재현,박완범,이기덕,이창섭,김홍빈,오명돈,최강원 대한감염학회 2004 감염과 화학요법 Vol.36 No.6

목적 : 국내 HIV 감염자 사이에서 발생한 매독의 유행을 보고하고, 그 역학적 특성을 규명하고자 하였다. 재료 및 방법 : 1999년 7월부터 2003년 9월까지 서울대학교 병원에서 추적 관찰을 받아온 HIV 감염자를 대상으로 하여 1기 및 2기 매독의 발생을 조사하였다. 발생률을 정확히 구하기 위해 추적 관찰을 받은 모든 HIV 감염자의 인년을 6개월 간격으로 구하였다. 결과 : 51개월 동안, 465명의 HIV 감염자가 서울대학교 병원에서 추적 관찰을 받았다. 이중 38명이 1기 및 2기 매독으로 진단되었다. 1기 및 2기 매독의 발생률은 이기간 동안 100인년 당 4.1명이었다. 1999년 7월부터 2001년 12월 사이에는 발생자가 없었으나, 이후 발생률은 꾸준히 증가하여 2003년 9월에는 100인년 당 18.8명이 되었다. 1기 및 2기 매독의 발생률은 동성애자 및 양성애자에서 이성애자에서보다 4.3배 높았고, HAART로 치료를 받지 않은 환자에서 HAART로 치료를 받고 있던 환자에서 보다 10.9배 높았다. 결론 : 2002년부터 국내 HIV 감염자 사이에서 1기 및 2기 매독이 유행하기 시작하였고, 이러한 유행은 동성애자와 양성애자 및 HAART로 치료를 받고 있지 않던 사람 사이에서 발생하였다. Background : This study was performed to characterize the epidemiologic and clinical features of outbreak of syphilis among HIV sero-positive patients in Korea. Materials and Methods : A retrospective case review of patients diagnosed with primary and secondary syphilis from July 1999 to September 2003 was carried out at Seoul National University Hospital in Korea. To estimate the incidence, person-years (PYs) of all HIV sero-positive patients, who visited the hospital in the same period, were calculated every 6 months. Results : In a 51 month period, 465 HIV-positive patients were followed up at Seoul National University Hospital. 38 cases of primary and secondary syphilis were diagnosed. The incidence of primary and secondary syphilis was 4.1 per 100 PYs during the study period. There was no case from July 1999 to December 2001, and then the incidence rose until September 2003 from 5.5 per 100 PYs in 1999 to 18.8 per 100 PYs in 2003. The rate of primary and secondary syphilis was 4.3 times higher among homosexual and bisexual men than heterosexual men (95% CI 1.87 to 11.17), and 10.9 times higher among patients who did not receive HAART than patients who were receiving HAART (95% CI 5.47 to 21.79). Conclusion : The outbreak of primary and secondary syphilis among HIV-positive patients started in 2002 and has been escalating, especially among homosexual/bisexual men and in patients who did not receive HAART.

SMT사용공장의 바닥 및 천장 방음시공에 따른 바닥충격음 저감 효과에 관한 연구

장재희,조방현 대한건축학회 2004 대한건축학회논문집 Vol.20 No.10

This study aims to solve the problem of noise and vibration transmitted to adjacent room especially to the downstairs when using SMT(Surface Mount Technology) equipments To achieve this, a kind of system for preventing noise and vibration was applied, and the effects of sound insulation performance for those alternatives were tested and analyzed To reduce floor impact noise, floating floor system using a plastic pallet and rubber was applied The applied plastic pallet is the size of 30cm wide ? 60cm deep ?6cm high and designed to array on a concrete slab, above this plastic pallet, a 14-cm thick concrete was constructed After installation of this system the floor impact sound was reduced about 7dB(A) For more reduction, a ceiling with a 5-cm thick glass wool and twofold of 0.9-cm thick plywood was constructed at the directly below downstairs According to this, 4dB(A) was additionally reduced Based on these results, the design guidelines were suggested to reduce the impact noise generated by using SMT equipment

Global-MAHN에서 라우팅 오버헤드 개선에 대한 연구

張良根,金玄旭,李光培,吳世德,裵振勝,金在浩 明知大學校 産業技術硏究所 2007 産業技術硏究所論文集 Vol.26 No.-

In this Paper, we studied the mechanism that increases the network reliability and decreases network load in GMAHN environment based on the AODV routing protocol. This proposed algorithm is the research on the algorithm, minimizing network overhead by preventing unnecessary network overhead previously and adapting Local repair mechanism to efficient data transmission when route error happens in network, in GMAHN environment. To evaluate the proposed algorithm's performance, we analyzed the proposed algorithm and adapting in various experiment environment according to 5 experiment viewpoint such as node movement, gateway network zone, mobile node number, flow number. After evaluating the experiment, we confirmed better network improvement altogether through following result such as total average data reception rate's increase, average data transmission time's decrease, network overhead's decrease than existing GMAHN algorithm.

IMT-2000 기지국용 이중 편파를 위한 광대역 단일 소자 안테나 설계 및 특성 개선

장원호,박주성,태재훈,이윤현 한국항행학회 2002 韓國航行學會論文誌 Vol.6 No.3

본 논문에서는 편파 다이버시티 특성을 갖는 이중 편파(Dual-Polarization)방식의 INT-2000(1.885㎓-2.17㎓)기기국용 안테나에 사용할 수 있도록 기존 Folded Dipole안테나의 특성을 개선하였다. 제작된 안테나는 PCB기판에 몰디드 다이폴 안테나 구조에 적층 형태를 갖는 마이크로 스트립 안테나로서 각 단자별 반사게수가 -20㏈ 이하, 이중 편파 구조에서 중요한 규격인 단자간 분리도는 -20㏈ 를 가지며, 이들은 전 대역에서 약 7 dBi 이상의 특성을 보였다. Design and characteristic improvement of existing folded dipole antenna is presented to adopt W-CDMA(1.885~2.170 ㎓) wideband antenna radiators. The antenna structure has +/- 45 degrees dual polarization. In order to overcome the narrow bandwidth and low gain characteristic typical of the microstrip antenna, double layered structure was employed. The antenna achieved below -20 ㏈ reflection coefficients each ports. -20 ㏈ of port isolation, above 7 dBi of gain, providing evidence that the proposed design can be used in the W-CDMA service frequency band antenna.