가와사끼병에서 면역글로불린 사용 후 ASO 수치의 변동에 관한 고찰

황성욱,이지웅,송민섭,김철호 인제대학교 2006 仁濟醫學 Vol.27 No.-

Objective : Since Kawasaki disease was first described in 1967, the cause and prognostic factors have not been known despite many researches and efforts. The introduction of high-dose intravenous gamma-globulin (IVGG) was an epoch and IVGG is now a standard therapy. But the mode of action of IVGG in reducing inflammatory response is not clearly understood. Understanding of the mechanism should supply the clues that indicate the cause, prognosis, the better treatment of this disease. At present, the correlation of CRP, ESR and change of leukocyte numbers to Kawasaki diseases were known, but the correlation studies of ASO titers are rare. To discover this, we evaluated the interrelationship between the ASO titer and IVGG therapy. Methods and Materials : The subjects included 35 patients with Kawasaki disease who were treated by IVGG at department of pediatrics, Inje university, Busan Paik hospital from June, 2004 to December, 2005. Before and after IVGG administration, ASO titers were evaluated. Results: In the 32 among 35 patients, ASO titers checked before IVGG administration were increased prominently after IVGG therapy. Conclusion : Remarkably increased ASO titers after IVGG administration for the treatment of Kawasaki diseases were found. And changes of ASO titers seem to be due to immunoglobulin instead of streptococcal infection. Further studies will be necessary to clarify the pathogenic mechanisms of increased ASO titers.

VIP를 분비하며 신경절신경종의 분화를 가지는 갈색 세포종 1예

나민아,김상수,김동욱,최재훈,이태근,공옥녀,안준협,김지연,성한동,정철호,손석만,김인주,김용기 대한내분비학회 2003 Endocrinology and metabolism Vol.18 No.2

갈색 세포종은 신경내분비종양의 하나로 VIP를 포함한 다양한 신경내분비 펩타이드를 분비할 수 있다. 저자들은 만성 설사와 체중 감소를 주소로 내원한 환자에서 좌측 부신에 VIP를 생성하는 갈색 세포종을 진단하여 성공적으로 제거한 후 증상이 모두 호전된 1예를 경험하였기에 문헌고찰과 함께 보고하는 바이다. Vasoactive intestinal peptide (VIP) is a 28-amino acid peptide, which may cause secretory diarrhea by stimulating the production of adenylate cyclase. Neuroendocrine tumors, secreting vasoactive intestinal peptide (VIP), are almost always of a pancreatic in origin. However, a pheochromocytoma may produce several neuropeptides, containing VIP, as they are considered to be neuroendocrine tumors. A 57-year-old woman, who presented with chronic watery diarrhea, hypokalemia, weight loss and a left adrenal mass, is described. Histologically, the tumor was diagnosed as a pheoch-romocytoma, with ganglioneuronal differentiation, and was histochemically confirmed to produce a vasoactive intestinal polypeptide. A left adrenal VIP-producing pheochromocytoma was successfully resected. After surgery, her diarrhea subsided and the electrolytes, affected neuroendocrine hormone levels, blood pressure and blood sugar level were normalized (J Kor SOC Endocrinol 18:227-231, 2003).

선천성 완전방실차단이 동반된 신생아 루프스 1예

정재현,이은지,이은주,황진원,송영진,최병진,김일환,김종윤,허민영,김동욱 인제대학교 2009 仁濟醫學 Vol.30 No.-

Neonatal lupus is a rare syndrome occurring In neonates with tranplacentally acquired maternal autoantibodies, In particular anti-SSA/Ro-SSB/Ra antibodies. Manifestations include congenital heart block, cutaneous lesions, thrombocytopenia, neutropenia, pulmonary or neurological disease and hepatitis. The non-cardiac manifestations resolve by 6 months of age, congenital heart block is irreversible. We experienced a case of neonatal lupus with congenital complete heart block in a newborn of asyptomatic mother with anti-SSA/Ro-SSB/Ra antibodies.

리튬 이온 이차전지를 위한 부극용 Si 특성에 관한 연구

김성호,이상헌,박일현,김민철,우태욱,손영국 부산대학교 생산기술연구소 2000 生産技術硏究所論文集 Vol.59 No.-

리튬이온이차전지의 부극으로 Si를 사용하였다. 부극용 Si전극을 1회 충방전 시 Li이온이 탈 삽입될 때 각각의 전압에서 XRD 회절분석을 통하여 Li이온이 이동하여 Si와 반응하는 것을 조사하였다. 순환전압전류 및 충방전 시험을 통하여 전기 화학적 특성을 측정해본 결과 부극으로써 Si의 산화환원 반응이 양호하게 이루어졌으며 충방전에 대한 cycle number가 증가할수록 비가역적인 산화환원반응 및 부피변화로 인해 싸이클 특성 감소함을 나타내었다. Si with anode is used Li ion secondary batteries During Li ion intercalating at first cycle, XRD analysis studies at others voltages showed that Li ions are moved and reacted to Si The electrochemical properties of Si anode materials were evaluated by cyclic voltammetry and charge/discharge test. With cycle number increasing, cyclic characteristics are decreased for irreversible reduction/oxidation and volume change.

근로자의 화학물질 노출관련 기록 보존에 관한 연구

오상민 ( Sang Min Oh ),박동욱 ( Dong Uk Park ),유성재 ( Seoung Jae Yu ),정진우 ( Jin Woo Jung ),임경택 ( Kyung Taek Lim ),이재환 ( Jae Hwan Lee ),하권철 ( Kwon Chul Ha ) 한국산업위생학회 2013 한국산업보건학회지 Vol.23 No.4

Objectives: Employee exposure record refers to a record containing information about environmental(workplace) monitoring or measuring of a toxic substance or harmful physical agent. The aims of this study were to examine problems related to exposure records and provide some amendments to the Korean Industrial Safety & Health Act for the effective management of chemical substances under the law. Methods: This study performed a literature search and review on legal provisions related to exposure records of a number of different countries, including Korea, the USA, Japan, EU, Germany, and the UK. They were compared and investigated and the amendment of articles was suggested. Results: The results of this study were provided as suggested amendments to the related act. There were a variety of ways of improvement, including a 30-year retention period and the introduction of new access methods, contents, transfer, and maintenance methods. All exposure data elements have to be standardized, including reference to a similar exposure group(SEG), sampling strategy, and circumstances of exposure(e.g., date, shift length, use of personal protective equipment, etc.). The SEGs are described by process, job, task, and environmental agent. Conclusions: This study is expected to provide for the amendment of the related act in order to ensure effective management of exposure records and is helpful for solving the cause and result of occupational disease by keeping exposure records according to the Industrial Safety & Health Act.

데이터 글러브를 이용한 손 제스처 기반 3차원 게임 구현

유다연,권차욱,곽지민,백화현,김이조,차경애 대구대학교 정보통신연구소 2010 情報通信硏究 Vol.7 No.1

데이터 글러브(Data Glove)는 손 제스처를 정의하여 시스템을 제어하는 입력장치로 가상현실기술 및 교육, 의료, 산업분야에서 많이 사용되고 있다. 이는 가상현실 속에 존재하는 사물을 현실에서 제어하게 함으로써 사용자에게 마치 현실 세계의 사물을 제어하는 느낌을 주는 장점을 가지고 있다. 이에 본 논문에서는 이러한 데이터 글러브의 장점을 이용하여 3차원 게임에 적용시키는 방법을 제안한다. 먼저 데이터 글러브로 제스처를 정의하고, 트래커(Tracker)와 연동하여 시스템을 구현한다. 구현된 시스템을 실험하기 위해서 OpenGL로 인형 뽑기 게임을 구현하고 사용자가 데이터 글러브를 착용 후 정의된 제스처를 통해 게임을 제어하도록 한다. 본 논문에서 제안한 방법은 사용자들에게 좀 더 높은 몰입감을 제공하며, 향후 게임 산업 발전에도 많은 영향을 줄 것으로 기대한다.

한국 성인을 대상으로 한 전산화 Standard Progressive Matrices의 표준화 예비연구

홍경수,이민수,오병훈,하규섭,유한익,이창욱,연병길,김성윤,신민섭,김재진,권준수 大韓神經精神醫學會 1999 신경정신의학 Vol.38 No.5

연구목적 : 전산화 Standard Progressive Matrices(SPM) 검사의 한국인 성인 표준자료를 확립함으로써, 간이로 지능을 평가하는 경우에도 보다 정확하게 지능지수를 추정하기 위해서 본 연구를 수행하였다. 방 법 : 18세 이상의 남녀 정상인 자원자 353명을 대상으로 전산화 SPM 검사를 시행하고, 백분율 및 표준점수(T-점수)를 기준으로 하여 표준화 자료를 작성하였다. 전체 대상군을 성별, 연령별로 구분한 후 평균과·분포가 유사한 집단은 군을 합치는 방법을 사용하였다. 한국인 표준자료에 근거하여 추정한 SPM 지능지수와 외국인 표준자료에 근거하여 추정한 SPM 지능지수를 각각 KWAIS 지능지수와 비교함으로써 타당도를 검증하였다. 결 과 : 18∼30세, 31∼40세, 41∼50세, 51세 이상의 연령군으로 구분된 한국 정상 성인의 SPM 표준화 자료를 산출하였다. 본 연구 결과에 의한 표준화 자료를 적용하여 지능지수를 추정하는 것이 현재 사용하고 있는 외국인의 표준화 자료를 이용하는 것보다 KWAIS 지능지수에 더욱 근접한 결과를 보였다. 결 론 : 18세에서 50세까지의 한국인 남녀에게는 간이지능평가도구로서 전산화 SPM 검사의 한국인 표준화 자료를 유용하고 타당하게 적용할 수 있음을 확인하였다. Objectives : We conducted this study to provide standardized data of the computerized Standard Progressive Matrices(SPM) test in Korean adults. Methods : The computerized SPM test was administered to 353 healthy volunteers aged 18 years over. We provided the standardized data(percentile and standardized T-scores) for the groups with similar mean and distribution of SPM scores, which was originally divided by age and sex. The validity of the new standardized data was tested by comparing IQs estimated by SPM and K-WAIS. Results : The standardized SPM data were provided for four age groups : 18 to 30 years, 31 to 40 years, 41 to 50 years, 51 years and over. IQ estimated by this standardized data tends to be closer to IQ by K-WAIS than the IQ estimated by foreign normative data. Conclusion : The standardized data of the computerized SPM were proven to be a useful and valid tool for measuring IQ briefly, compared with the conventional way of measuring IQ.

Gitelman씨 증후군 1예

차영학,송명준,신요식,김성민,김영욱,김윤권,김소연,김영중,조민구,이권전 全南大醫大 2001 전남의대학술지 Vol.37 No.3

제 2형 콜라겐에 의해 경구관용 유도된 DBA/1 mice에서의 세포면역반응

양형인 ( Hyung In Yang ),김완욱 ( Wan Uk Kim ),민도준 ( Do Jun Min ),박성환 ( Sung Hwan Park ),홍연식 ( Yeon Sik Hong ),이상헌 ( Sang Heon Lee ),조철수 ( Chul Soo Cho ),김호연 ( Ho Youn Kim ) 대한류마티스학회 2000 대한류마티스학회지 Vol.7 No.4

Objective: To investigate the dosage of bovine type II collagen (BnCII) for the induction of oral tolerance in CIA animals, and to verify the changes of immune response and TGF-β production of mesenteric lymph node cells in tolerized CIA animals. Methods: Oral tolerance was induced by feeding of variable doses (5㎍, 10㎍, 20㎍ and 40㎍) of BnCII to DBA/1 mice 4 times per week during 2 weeks, and control mice were given ovalbumin (1000㎍), before immunization. We examed clinical assessment; incidence of arthritis, severity of arthritis, arthritic limb by visual analysis. IgG antibodies to BnCII were measured by ELISA, T cell responses to BnCII and PHA were quantified by antigen (CII)-induced 3H-thymidine incorporation into lymphocytes of mesenteric lymph node, draining lymph node, and spleen. TGF-β in supernatants obtained from lymph node culture medium was measured by ELISA. Results: Arthritis limbs were observed in 100% of control at 5 weeks after subcutaneous BnCII injection. The incidences of CIA in all tolerized group were significantly lower than that in control 5 weeks after immunization (control 100% vs. 5㎍ feeding group: 50%, 10㎍ feeding group: 50%, 20㎍ feeding group: 50%, 40㎍ feeding group: 55.5%, P<0.01). In comparison to control, mean articular indices were lower in all tolerized groups (control 5.13: 5㎍ feeding group 3.50, 10㎍ feeding group 2.75, 20㎍ feeding group 2.87, 40㎍ feeding group 2.63, P<0.05). Arthritic limbs were also significantly lower in tolerized groups (control 58.3: 5㎍ feeding group 20.8, 10㎍ feeding group 16.7, 20㎍ feeding group 20.8, 40㎍ feeding group 20.8, P<0.05). The titers of IgG antibody to CII were lower in tolerized group than that in control [tolerized group; median 10 (min. 0, max. 48), control; median 33 (min. 8.6, max. 101), P<0.05]. The proliferative responses to BnCII were significantly suppressed in tolerized (control 8010±2319cpm, tolerized group 4500±2060cpm, P<0.01). High TGF-β production was noted in tolerized group (control; 28pg/ml, BnCII feeding group; 73pg/ml). Conclusion: Oral tolerance in DBA/1 mice was successfully induced from low doses of BnCII (5㎍) and suppressed T and B cell function in conjunction with increased TGF-β production may play an important role for the induction of CII induced oral tolerance in DBA/1 mice.

3D 프린터를 이용한 Customized Bolus 제작에 관한 연구

정상민,양진호,이승현,김진욱,염두석,Jung, Sang Min,Yang, Jin Ho,Lee, Seung Hyun,Kim, Jin Uk,Yeom, Du Seok 대한방사선치료학회 2015 대한방사선치료학회지 Vol.27 No.1

목 적 : 3D 프린터는 입력한 도면을 바탕으로 3차원의 입체 모델을 만들어 낼 수 있는 장비이다. 이러한 특징을 이용하여 방사선치료시 bolus 사용으로 인한 피부와 bolus 사이의 air gap을 최소화 할 수 있는 bolus 제작이 가능하다. 이에 본 연구에서는 3D 프린터를 이용하여 customized bolus를 제작하여 air gap과 target 선량을 상품화된 1 cm bolus와 비교하고자 한다. 대상 및 방법 : 왼쪽 chest wall에 돌출된 종양이 있는 RANDO phantom을 CT 모의치료기를 이용하여 영상 획득 후, CT DICOM 파일을 3D 프린터에 필요한 STL 파일로 변환시켰다. 이것을 이용하여 치료부위의 체표윤곽과 일치하면서 1 cm 두께를 유지하는 customized bolus 주형틀을 3D 프린터로 제작한 후 paraffin wax를 녹여 customized bolus를 만들었다. 이렇게 만들어진 customized bolus와 상품화된 1 cm bolus의 air gap을 확인하였고, air gap으로 인한 차이를 Eclipse를 이용하여 치료계획상 $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$와 $V_{95%}$를 비교하였다. 결 과 : customized bolus 제작 기간은 약 3일이 소요되었다. air gap 총 용적은 customized bolus는 평균 $3.9cm^3$, 상품화된 1 cm bolus는 평균 $29.6cm^3$이었다. 상품화된 1 cm bolus를 사용할 때보다 3D 프린터를 이용하여 제작한 customized bolus를 사용하는 것이 air gap을 최소화시켰다. 6 MV photon에서 customized bolus의 $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$는 각각 102.8%, 88.1%, 99.1%, 95.0%, 94.4%이었고, 상품화된 1 cm bolus의 $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$는 101.4%, 92.0%, 98.2%, 95.2%, 95.7%이었다. proton의 경우 customized bolus의 $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$는 각각 104.1%, 84.0%, 101.2%, 95.1%, 99.8%이었고, 상품화된 1 cm bolus의 $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$는 104.8%, 87.9%, 101.5%, 94.9%, 99.9%이었다. 이처럼 치료계획에서 customized bolus와 1 cm bolus 모두 GTV의 선량은 큰 차이를 보이지 않았다. 그러나 GTV에 인접한 정상조직은 customized bolus의 선량이 더 적게 나타났다. 결 론 : 3D 프린터를 이용한 customized bolus가 표면이 일정하지 않은 치료부위에 사용 할 때 air gap을 줄이는 효과를 나타냈다. 그렇지만 상품화된 bolus와 피부 사이에 생기는 air gap은 target에서의 선량의 변화를 일으킬 만큼 많은 양이 아님을 알 수 있었다. 반면 chest wall에서는 air gap이 적을수록 선량이 감소함을 확인 할 수 있었다. customized bolus 제작 기간은 3일이 걸렸고, 고가의 제작비용이 든다는 문제점이 발생하였다. 따라서 3D 프린터 customized bolus의 상용화를 위해서는 저비용이고, bolus 사용으로 적합한 3D 프린터 재료 모색의 필요성이 있다고 사료된다. Purpose : 3D Printers are used to create three-dimensional models based on blueprints. Based on this characteristic, it is feasible to develop a bolus that can minimize the air gap between skin and bolus in radiotherapy. This study aims to compare and analyze air gap and target dose at the branded 1 cm bolus with the developed customized bolus using 3D printers. Materials and Methods : RANDO phantom with a protruded tumor was used to procure images using CT simulator. CT DICOM file was transferred into the STL file, equivalent to 3D printers. Using this, customized bolus molding box (maintaining the 1 cm width) was created by processing 3D printers, and paraffin was melted to develop the customized bolus. The air gap of customized bolus and the branded 1 cm bolus was checked, and the differences in air gap was used to compare $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$ and $V_{95%}$ in treatment plan through Eclipse. Results : Customized bolus production period took about 3 days. The total volume of air gap was average $3.9cm^3$ at the customized bolus. And it was average $29.6cm^3$ at the branded 1 cm bolus. The customized bolus developed by the 3D printer was more useful in minimizing the air gap than the branded 1 cm bolus. In the 6 MV photon, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 102.8%, 88.1%, 99.1%, 95.0%, 94.4% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 101.4%, 92.0%, 98.2%, 95.2%, 95.7%, respectively. In the proton, at the customized bolus, $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of GTV were 104.1%, 84.0%, 101.2%, 95.1%, 99.8% and the $D_{max}$, $D_{min}$, $D_{mean}$, $D_{95%}$, $V_{95%}$ of branded 1cm bolus were 104.8%, 87.9%, 101.5%, 94.9%, 99.9%, respectively. Thus, in treatment plan, there was no significant difference between the customized bolus and 1 cm bolus. However, the normal tissue nearby the GTV showed relatively lower radiation dose. Conclusion : The customized bolus developed by 3D printers was effective in minimizing the air gap, especially when it is used against the treatment area with irregular surface. However, the air gap between branded bolus and skin was not enough to cause a change in target dose. On the other hand, in the chest wall could confirm that dose decrease for small the air gap. Customized bolus production period took about 3 days and the development cost was quite expensive. Therefore, the commercialization of customized bolus developed by 3D printers requires low-cost 3D printer materials, adequate for the use of bolus.