클럽 샤프트(Club Shaft) 특성에 따른 골프 스윙(Golf Swing)동작 분석

김성일,김기형,김형수,이현섭,김진욱,안찬규,김희진 한국운동역학회 2002 한국운동역학회지 Vol.12 No.2

본 연구는 클럽 샤프트의 대표적인 재질인 그라파이트(graphite)의 유연한(flexible) 클럽 샤프트(club shaft)의 특성에 따라 피험자가 운동학적(kinematics) 요인이 되는 관절의 각변위, 각속도, 각가속도, 클럽헤드의 속도와 가속도와 같은 변인들이 어떻게 적응하는지 비교 분석하여 보다 효율적인 드라이버 선택에 도움을 주며 샤프트 특성에 따른 신체관절의 움직임에 대한 자료를 제시하고자 하였다. 고속 카메라 2대의 속도는 500fps로 하였고 각 regylar,stiff, x-stiff, 자신의 클럽을 포함 각 4개의 클럽을 사용하여 각 클럽당 3번씩 촬영하였으며 목표방향에서 20m이상 벗어나는 경우의 촬영은 다시 촬영하였다. 본 연구에서는 디지타이징(digitizing)을 신체 9개 마커는 강체로 가정된 클럽과 신체분절 모델로 정의하였으며 2 대의 카메라(500fps)로부터 얻은 avi화일을 컴퓨터에 저장하고 자료로부터 Butterworth 6th order recursive digital filter를 사용하여 1차 자료를 smoothing 하고 DLT를 이용하여 3차원 좌표를 구성하도록 한다. 좌표값을 얻기 위하여 kwon3d v3.0을 이용하였다. 본 실험은 피험자 스스로 클럽의 특성에 따라 스윙의 속도를 달리 하기 때문에 스윙의 시간이 달라지며 어느 정도 클럽이 강성에 따라 스윙시간이 빨라지는 결과로 나타났다. 이것은 피험자가 샤프트가 강성(stiffness)에 따라 스윙 속도를 빨리 하게 되는 원인이 되는 것으로 생각된다. 어깨의 각변위는 클럽이 regular의 경우 임팩트에서 각속도를 계속 유지하고 있으며 stiff, x-stiff의 경우에는 어깨의 움직임이 임팩트에서 급격하게 감소되는 것을 알 수 있다. 이것은 팔의 동작과 클럽의 힘을 크게 하기 위한 동작으로 생각된다. 어깨 각속도는 클럽이 stiff할수록 각속도가 큰 감속하는 것으로 나타났다. 손목속도는 regular 클럽의 경우 손목의 감속이 늦게 되고 임팩트에서 손목의 감속이 적게 하는 것으로 나타났으며 stiff와 x-stiff의 클럽에서 임팩트 시에 순간적인 감가속으로 인해 클럽의 속도를 증가시키고 있다. 임팩트 시에 손목의 감가속은 클럽헤드의 임팩트 시 속도를 증가시키는 결과를 보였다. 클럽헤드는 regular 클럽이 임팩트전에는 속도 증가가 커지는 결과와 일치된 결과를 보이고 있다. The purpose of this study was to find the rational method to analyze golf swing with specific property of club shaft. Three subjects were filmed by two high speed digital cameras with 500fps. The phase analyzed was downswing of each subject. The three-dimensional coordinates of the anatomical landmarks were obtained with motion analysis system Kwon3d 3.0 version and smoothed by lowpass digital filter with cutoff frequency 6Hz. From these data, kinematic and kinetic variables were calculated using Matlab(ver 5.0) The variables for this study were angular velocity and accelerations, which were calculated and following conclusions have been made : 1) Golf swing time of stiff club is faster than that of regular club. 2) In shoulder joint motion of swing with the stiff club, x-stiff showed mort rapid negative acceleration than that of regular club. 3) In regular club, the velocity of club head would be more effective velocity, which was increasing, than those of other clubs before impact. 4) In wrist joint motion of swing with stiff club, x-stiff club showed faster than regular club in the downswing and impact more rapid negative acceleration.

Application of Artificial Insemination Technology for Dairy Breeding in Mongolia

Hyun‐Tae Jo,Jong‐In Jin,Seong‐Su Kim,Byung‐Hyun Choi,Tumor Baldan,Jung‐Gyu Lee,Yun‐Shik Kim,Sam‐Churl Kim,Il‐Keun Kong 한국동물생명공학회(구 한국동물번식학회) 2011 발생공학 국제심포지엄 및 학술대회 Vol.2011 No.1

This study was focused on improvement of milk production in Mongolia dairy industry by artificial insemination (AI) technology, of which was supported from ODA project of KOICA in Republic of Korea. The study was started from January 2009 to present and 3rd years in this year. So, all data, especially synchronization and pregnancy of dairy cows (Holstein) will be summarized in final result in this year. For synchronization, total 81 dairy cows selected from 4 private farms that were 38, 30, 8 and 5 in Undarmal milk, Onjin (Enkhbayer), Jargalant, and BRM School, respectively. All the dairy cows were injected intramuscular (IM) of 5 ml PGF2α in the vulva and detected estrus 2 to 3 days after PGF2α injection. Total 78 out of 81 dairy cows (96.3%) were detected estrus by only 1 time injection of PGF2α. The dairy cows that were induced estrus, inseminated with 0.5 ml dairy frozen semen by conventional AI techniques. The pregnancy diagnosis of the AI dairy cows was detected by uterus palpation after 60 days of insemination. Total 75 from 78 inseminated dairy cows (90.1%) were diagnosis pregnant. The estrus induction and pregnant rate were very effective using PGF2α injection and conventional AI techniques in Mongolia dairy cow. The results indicated that AI after estrus induction in Mongolia dairy cows could be applied to dairy breeding technology to improve the breeding efficiency and milk production.

동종 골수이식 후 만성 이식편대숙주질환과 동반되어 신증후군으로 발현된 IgA 신병증 1예

정철권,김현수,박준성,정성현,조도연,최진혁,남동기,임호영,김명성,신규태,임현이,김효철 대한조혈모세포이식학회 1999 대한조혈모세포이식학회지 Vol.4 No.2

동종 골수이식 후 발생하는 신기능부전은 원인이 다양하여 감별에 어려움이 있다. 만성 GVHD는 흉선의 기능저하에 따른 면역관용의 실패로 발생되는 자가면역현상에 의해 발생되는 것으로 알려져 있으며 드물게 신장을 침범하여 신증후군을 일으키기도 한다. CaA의 용량을 줄이거나 투약중지 후 발생한 만성 GVHD에 동반된 신증후군의 경우 조기에 신조직검사를 시행하여 감별진단하고 CsA의 용량을 증량하거나 재투약하여 좋은 치료 결과를 보일 것으로 기대된다. 저자들은 문헌고찰을 통해 동종 골수이식 후 발생된 신증후군이 유사한 임상양상을 보이며 발생기전에 만성 GVHD와 자가면역현상이 연관되어 있음을 확인하였으며 동종 골수이식 후 신증후군의 임상양상을 보이는 환자에서 병리조직학적으로 lgA 신병증을 진단하고 이러한 lgA 신병증이 발생기전에 만성 GVHD와 자가 면역현상이 연관되어 있을 가능성을 최초로 확인하였으며 CsA를 이용하여 성공적으로 치료한 경험을 하였기에 보고하는 바이다. Renal insufficiency is occasionally encountered in allogeneic bone marrow transplantation and its cause is difficult to ascertain. Chronic graft-versus-host disease (GVHD) related to thymic dysfunction is immune-mediated and involves autoreactivity of T-lymphocytes derived from donor marrow to recipient's major histocompatibility complex(MHC) minor antigens. The clinical mainifestations of chronic GVHD are similar to those of autoimmune disease but kidney involvement is rare. Few cases of nephrotic syndrome with membranous nephropathy or minimal change nephrotic syndrome have been reported to be associated with chronic GVHD in allogeneic bone marrow transplant recipient especially after cyclosporine A(CsA) withdrawal, and these cases have responded well to CsA. Therefore, it is prudent to differentiate the cause of post-transplant renal insufficiency using renal biopsy and to start CsA in a case of nephrotic syndrome associated with chronic GVHD as early as possible. We report a case who had a massive proteinuria during the post-allogeneic marrow transplantation period. The cause of nephrotic syndrome was diagnosed as IgA nephropathy by renal biopsy. The patient was successfully treated with reintroduction of CsA.

제조업체 광물성분진의 총분진, 흡입성분진, 흉곽성분진과 호흡성분진의 농도

김용우,피영규,김현욱,김형아 가톨릭대학교 산업의학센터 2000 韓國의 産業醫學 Vol.39 No.2

This study was designed to estimate particle size distribution of airborne dust by an 8-stage cascade impactor, to compare concentrations of total dust by 37mm closed-face cassette with total dust, thoracic particle mass(TPM), inhalable particle mass(IPM) concentrations by an 8-stage cascade impactor and to estimate concentrations of respirable dust collected by cyclone in manufacturing factories. Total 85 sites in 44 factories were sampled from August 1, 1996 to December 31, 1997. The results were as follows: 1.The geometric mean concentration of total dust collected by 37mm closed-face cassette were 0.27-1.44 mg/㎥. The GM concentrations of total dust by impactor were 0.82-2.85 mg/㎥, of inhalable dust 0.63-2.24 mg/㎥, and of thoracic dust were 0.31-1.40 mg/㎥, respectively. 2.The analysis of particle size distribution showed bimodal patterns for almost all sampling sites studied. Geometric mean(GSD) diameters of the small mode were 0.515(1.577) ㎛ - 3.032(13.698) ㎛, while the large mode were 11.873(2.460) ㎛ - 19.774(2.606) ㎛, respectively. 3.The geometric mean(GSD) concentrations of respirable dust collected by cyclone were 0.08-0.46 mg/㎥. To evaluate health hazards from mineral dusts occurring in manufacturing industries, these results suggest the necessity of promulgating particle size-selective limit values and sampling methods such as IPM, TPM, and RPM.

Inconel 718의 고온선삭가공에서 세라믹 공구의 노치 마모 특성에 관한 연구

김진남,이정윤,최규헌 三陟大學校 産業科學技術硏究所 1998 産業科學技術硏究論文集 Vol.3 No.-

Plasma hot machining for Inconell 718 has performed to improve the depth of cut notch wear of ceramic tools(SiC whisker reinforced alumina). In this study, wear characteristic of ceramic tools under plasma hot machining were examined, and compared with conventional machining of Inconel 718. The depth of cut notch wear of ceramic tool was significantly reduced under plasma hot machining test.

O_3와 O_3/UV를 이용한 수용액중의 음이온계면활성제의 처리에 관한 연구

김태성,문병현,이택순,서규태 7개 국립대학교 환경연구 논문집 공동발행 위원회 2001 환경연구논문집 Vol.1 No.1

Water pollution by discharging surfactant into receiving water has become serious. One of pollutants widely contained in domestic wastewater is surfactants. To remove these surfactants, ozonation has been used but it doesn't perfectly remove relatively non-degradable organic matter. Recently, an advanced oxidation process using OH radical has been developed and applied for removing such non-degradable pollutants. In this study it was treated Sodium Dodecyl Benzene Sulfonate (DBS) using Ozone and Ozone/UV process. The results showed that removal efficiencies by Ozonation increased as the dissolved ozone concentration, initial temperature and pH increased. The combination process of Ozone/UV for DBS removal resulted in 4 times higher reaction rate than the Ozonation process. The combination process showed higher removal efficiencies for treating laundry wastewater and the removal efficiencies was increased by pretreating particle matters.

2002년과 2007년 건강검진 수진자 특성비교

김윤진,김영주,이정규,박현지 부산대학교 병원 암연구소 2009 부산대병원학술지 Vol.- No.25

국내 제화산업을 위한 종합정보시스템의 개발

김현규 公州大學校 工學硏究院 生産技術硏究所 2004 論文集 Vol.12 No.-

This paper presents a case study for web-based DB retrieval system for shoe industry in Korea. The system is designed according to the Software Engineering Methodology suggested by James Martin. The design encompasses both process modelling and data modelling. In particular, the data model is designed in the context of relational database system. User interfaces are designed according to WWW environment. Ultimately, the system is expected to be a network model to connect shoe industry, universities and research centers in Korea.

림프종으로 오인된 위 매독 1 예

김병규;전태주;박지영;서희영;오태훈;김현정 인제대학교 2011 仁濟醫學 Vol.32 No.-

Syphilis is a chronic systemic infectious disease caused by Treponema pallidum. Syphilitic involvement of the stomach can occur via the blood flow in the primary or secondary period of syphilis, but its incidence is very rare. Gastric syphilis should be considered in patients at risk of sexually transmitted disease who complains of abdominal pain, nausea and vomiting and in whom unusual endoscopic or radiographic features are found. Because gastric syphilis has no pathognomic clinical findings and it can simulate gastric cancer or lymphoma, it’ s not so easy to diagnose. If diagnosed, however, gastric syphilis can be easily treated with proper antibiotics. We report on a case of gastric syphilis that manifested epigastric pain, anorexia and weight loss. It was initially thought to be lymphoma, but it was correctly diagnosed by serologic testing and progress.

생물학적 폐수처리시 휴지기간이 처리특성에 미치는 영향에 관한 연구

김상수,문병현,서규태,이택수 7개 국립대학교 환경연구 논문집 공동발행 위원회 2004 공업기술연구 Vol.4 No.-

Under recent situation of more stringent effluent regulations, small scale biological process for industrial wastewater treatment has on operational problems, such as highly variable loadings into the system. Especially, the seafood processing industry has difficulties to treat is because of its highly variable organic loading and high saline concentration (>30g/d㎥). High salt concentrations disrupt metabolic functions and cause plasmolysis and/or loss of activity of microbial flora, hence the biological treatment of the saline wastewaters could produce low COD removal efficiency. On the basis of background mentioned above, an appropriate operation of the existing treatment plant is required for stable effluent discharge at even highly influent loading. In this study, effects of long term ( days) idle periods on floc characteristics were investigated in treatment of saline wastewater by SBR. Temporal stop of feeding affects biological activity in the reactors and then floc structures such as size and fractal dimension. After a certain period of reoperation for orgnic activity, the size and fractal dimension of floc start to increase.