http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김영수,박진식,장성호,장부규,서정민,김장호 동아대학교 환경문제연구소 1996 硏究報告 Vol.19 No.2
This study was carried out to investigate the performance enhancement of forced oxidation operation on the limestone utilization and SO₂ removal efficiency of the pilot flue gas desulfurization system. The results are as follows : 1. The results of the forced oxidation tests have shown that converting from natural to forced oxidation operation can have a significant effect on both limestone utilization and SO₂ removal efficiency of an FGD system. Conversely, if the limestone utilization is maintained at a constant level, the SO₂ removal efficiency will increase. Conversely, if the pH is held constant, the limestone utilization will increase significantly. 2. This characteristic of a forced oxidation system can translate into lower L/G requirements and, therefore, reduced capital and operating costs for slurry recycle pumps. 3. Forced oxidation operation will provide improved limestone utilization and, therefore. reduced limestone reagent costs.
Ethylenediaminetetraacetic acid(EDTA)항응고제에 의한 Mean Corpuscular Volume(MCV)변화
홍승민,박영진,최하영,임진,정옥연,이호준,이호영,장숙진,문대수 朝鮮大學校 附設 醫學硏究所 1996 The Medical Journal of Chosun University Vol.21 No.2
It is essential that we put the anticoagulant into the blood specimen of the CBC test. However, the value of some parameters in the CBC test can be changed whenever using some anticoagulants. EDTA anticoagulant is mostly used these days. There are 3 kinds of EDTA, that is K_(2-), K_(3-), and Na_(2-) EDTA. The author studies how many effects each the EDTA gets into the true value of blood specimen for MCV of RBCs. Especially we compared the MCV effect of different concentrations of 3 EDTA anticoagulants on the bias with time and instrument. Some results are gotten. In our results, K_(3-)EDTA anticoagulant shows more satisfactory MCV value than K_(2) or Na_(2-)EDTA. On using concentration of EDTA, 1.5㎎ EDTA/㎖ of blood show more satisfactory MCV value than 7.5㎎ EDTA/㎖ of blood. However, the choice of anticoagulant may be dependant on the different instruments.
천연가스 사용 난방 및 산업보일러의 NOx와 CO 배출계수 산정 연구
장영기,최상진,김관,송기봉,김호정,정봉진 한국대기환경학회 2004 한국대기환경학회지 Vol.20 No.5
This study was conducted for developing the emission factors of nitrogen oxide(NOx) and carbon monoxide (CO) from the combustion boilers burning liquefied natural gas (LNG). These emission factors were compared with those of U.S. EPA and European Environment Agency (EEA). NOx and CO concentration in the flow gas were measured using Kane-May, KM9106 and Thermo Environmental Instruments Inc., 42C-HL. Measurement were conducted at thirty industrial and commercial LNG boilers. Emission factors were calculated on the basis of fuel consumption (kg-pollutant/㎥-fuel burned). NOx concentration at industrial boiler was 14~125 ppm and it was measured as 35~125 ppm at commercial boiler. NOx emission factors of industrial boiler and commercial boiler were 1.84kg/㎥ and 2.09kg/㎥, respectively. NOx emission factor of commercial boiler was higher than that of industrial boiler. The NOx emission factors estimated in this study were lower than those of U.S. EPA and higher than those of EEA. Average CO emission factor of industrial boiler was 0.65 kg/㎥ and at commercial boiler it was 0.70kg/㎥, CO emission factor at industrial boiler was lower than that at commercial boiler.
Branch-Line Slit 을 갖는 이중 대역 PIFA의 설계 및 제작
장수영,윤진호,김보미,김석현,이영순 금오공과대학교 2005 論文集 Vol.26 No.-
A PIFA(Planar Inverted-F Antenna) which can be used in GSM/IXS dual band mobile phone has been designed and fabricated. In particular, in order to reduce the required top patch dimensions, the patch of the present PIFA has been designed as a type of an asymmetric branch line slit in which the excited patch surface currents can be meandered. By use of the HFSS, important design parameters such as the position of feed point and the length of slit were simulated and determined. In the present study, the design procedure by which the exact operating frequency and the proper band width can be obtained, are discussed. In order to check the validity of the present study, some simulated and measured results are presented.