시뮬레이션 기반 수도권 리사이클링 센터 폐냉장고 전처리 공정 개선

김도균,강민구,최진영,박기진,공만식,Kim, Do Gyun,Kang, Min Koo,Choi, Jin Young,Park, Kiejin,Kong, Man-Sik 한국시뮬레이션학회 2013 한국시뮬레이션학회 논문지 Vol.22 No.4

본 논문에서는 수도권 리사이클링 센터 폐냉장고 전처리 공정의 성능 개선 방안에 관하여 연구하였다. 이를 위해 현행 전처리 공정을 기본 작업 단위로 구분하고 공정 별 작업 시간을 측정하여 ARENA를 이용한 모델링 및 성능 분석을 수행하였다. 또한 실무자의 경험과 선진 사례 등에 기반한 3가지 새로운 전처리 공정 대안을 생성한 후 ARENA를 이용한 모델링 및 시뮬레이션을 통해 평가하였다. 최종 선정된 대안은 현행 2-라인 공정을 1-라인으로 전환하고, 냉매를 회수하기 위한 별도의 셀라인을 도입하는 것을 포함한다. 본 연구 결과는 현재 새로운 전처리 공정 라인으로 설치되어 운영되고 있으며, 이전 공정에 비해 사이클 타임과 생산성 향상뿐만 아니라, 공간 활용률 측면에서도 크게 개선된 결과를 보였다. This paper studies the improvement of a pre-processing line for waste refrigerators in a metropolitan recycling center(MRC). We performed ARENA modeling and simulation by using work analysis and time measurement on the current processing line. Combined this result with some practical experiences from workers, we generated 3 alternatives to improve the current line and evaluated them by using ARENA simulation. The final decision selected consists of changing 2-line process into 1-line and having a separate cell-line for collecting refrigerant. Currently, the result of this study was applied to MRC by improving cycle time, throughput, and space utilization compared to the previous one.

포스터 발표 - 무기재료분과 / 전기화학분과 / 촉매분과 : 고체 염기성촉매하에서 메탄올에 의한 아닐린의 알킬화 반응

김도균,이태진 ( Do Gyeun Kim,Tae Jin Lee ) 한국공업화학회 1997 한국공업화학회 연구논문 초록집 Vol.1990 No.3

드럼형 마찰대전장치를 이용한 혼합플라스틱의 정전선별

김도균,조희찬,전호석,Kim Do Kyun,Cho Hee Chan,Jeon Ho Seok 한국자원리싸이클링학회 2004 資源 리싸이클링 Vol.13 No.1

마찰대전을 이용한 정전분리는 서로 상이한 물질간의 마찰을 통해 서로 다른 극성으로 하전시켜 이를 전기장내에 통과시켜 분리하는 기술이며, 플라스틱과 같은 부도체입자들의 정전분리에 많이 사용된다. 본 연구에서는 연속식 드럼형 마찰대전장치를 개발하고 이를 폐건축 및 폐가전 플라스틱의분리에 적용시켰다 분리대상 플라스틱은 폐건축 자재의 경우 PE/PVC 혼합시료를 대상으로 하였으며, 폐가전의 경우 ABS/PS/PP의 혼합시료를 대상으로 하였다. 건축자재 혼합플라스틱 및 가전제품 혼합플라스틱 모두 드럼형 마찰대전장치를 이용할 경우 실험한 조건에서 무게기준으로 95%이상의 순도조건에서 95%이상의 회수율을 보였다. Triboelectrostatic separation process is a technology that different particles charged after contact and rubbing different materials are separated in a high electric field. This technology has an advantage in that it can be used for separating non-conducting materials such as plastics unlike other electrostatic separation processes. There are two objectives in this study. One is to develop an effective continuous tribo-electrostatic separation process. The other is to apply the developed device for the separation of mixed plastics. Results show that almost all tested plastics reaches over 95% in yield and grade after separation.

구연산과 섬유소의 치근면 도포가 성견 치주조직 재생에 미치는 영향

김도균,박재완,이재목,서조영,Kim, Doe-Gyeun,Park, Jae-Wan,Lee, Jae-Mok,Suh, Jo-Young 대한치주과학회 1994 Journal of Periodontal & Implant Science Vol.24 No.1

성견 견치의 인위적 골결손부에 치근활택술 시행 후, 섬유소 처리, 구연산 탈회, 섬유소 처리및 구연산 탈회가 치주조직 재생에 미치는 영향을 관찰하기 위하여 치근장축 방향으로 절편을 1일, 3일, 7일, 14일, 21일 간격으로 제작하여 광학현미경으로 관찰한 결과 다음과 같은 결론을 얻었다. 술후 1일째 대조군을 제외한 섬유소 단독도포군, 구연산 단독도포군 및 섬유소-구연산 병용도포군에서 섬유소양이 대차없이 밀집되어 나타났으며, 술후 3일째부터 대조군과 섬유소 단독도포군에서 상피의 하방성장이 관찰되기 시작하였고 구연산 단독도포군과 섬유소-구연산 병용도포군에서는 상피의 하방성장이 거의 관찰되지 않았다. 술후 1주째부터 각 군의 섬유소가 부분적으로 교원섬유로 대치되기 시작하였으며 2주후 각 군간에 대차없이 대부분의 섬유소기 교원섬유로 대치되는 양상을 보였으며 , 술후 3주째에 구연산 단독도포군과 섬유소-구연산 병용도포군에서 부분적으로 교원섬유의 규칙적인 배열상이 관찰되었고 대조군 및 섬유소 단독도포군에서는 거의 관찰되지 않았다. 구연산 단독도포군과 섬유소-구연산 병용도포군에서는 술후 2주째부터 치근흡수가 관찰되었으며 3주째에는 병 용도포군에 비해 구연산 단독도포군에서 더 많은 치근흡수가 관찰되었다. The purpose of this study was to evaluate the effects of citric acid and fibrin on the regeneration of periodontal tissues using 4 normal canines of five dogs. Mucoperiosteal flap was raised and experimental defects were made at the buccal root surfaces about $4{\times}6mm$ in length. The denuded root surfaces were covered using coronally repositioning technique after root planing alone at left lower canine, root planing plus fibrin at rigth lower canine, root planing plus citric acid at left upper canine or root planning plus citric acid and fibrin at right upper canine. All of the specimens were tangentially cut(about $3-5{\mu}m$)and available for histologic analysis 1, 3, 7, 14 and 21 days after operations. The results were as follows : At one' day after operations, the amounts of fibrin were similarly higher in the group I, II and III than control group and at 3 days after operations, the apical migrations of the long junctional epithelium were prominent in the control group and group I. At 7 days after operations, the fibrin meshworks of each group were partly changed to the collagen fibers and characteristics of the fibers were almost collagenous rather than fibrinous at 14 days after operations and at 21 days after operations, the orientation of collagen fibers were partly normal in group II and group III, but not in control group and group I. Root resorptions were visible in group II and group III at 14 days after operations and more significant in group II than group III at 21 days.

임해매립지의 느티나무 식재 이후 뿌리 생장특성 -뿌리구조 및 세근의 공간적 분포를 중심으로-

김도균,Kim, Do-Gyun 한국조경학회 2007 韓國造景學會誌 Vol.35 No.5

This study was carried out to analyze both the root structure and the fine root phytomass of the vertical and horizontal distribution of Zelkova serrata Makino. which was transplanted in the reclaimed land from the sea in Gwangyang, Jeonnam, South Korea. The base ground was reclaimed land from the sea. $Z_1$ of the planting ground was filled to a $100{\sim}150cm$ thickness with the improved soil instead of the reclaimed soil from the sea, $Z_2$ of the planting ground was covered to a $20{\sim}30cm$ thickness with the improved soil and $Z_3$ of the planting ground was mounded to 120cm thickness with the improved soil on the reclaimed land from the sea. In addition, $Z_4,\;Z_5\;and\;Z_6$ of the planting grounds were at the large-sized mound on the reclaimed land from the sea. $Z_4$ of the planting ground was located at the lowest level, $Z_5$ planting ground was located at the slope and $Z_6$ planting ground was located at the top of the large-sized mound. The large-sized mounds contain 3 layers, the base layer was reclaimed land from the sea and the second layer was mounded to a $200{\sim}300cm$ thickness with the desalinized soil from the sea on the base layers and the finally layers were mounded to a $80{\sim}120cm$ thickness with improved soil on the second layer. The planting grounds $Z_3,\;Z_4,\;Z_5\;and\;Z_6$ developed roots such as tap roots, lateral roots and heart roots. However, in $Z_1\;and\;Z_2$ roots development were inhibited. The fine-root phytomass of the 6 planting ground types was as follows: $113.5g\;DM/m^2$ for $Z_5$, $105.5g\;DM/m^2$ for $Z_4$, $88.3g\;DM/m^2$ for $Z_3$, $81.0g\;DM/m^2$ for $Z_6$, $73.0g\;DM/m^2$ for $Z_2$, $43.3g\;DM/m^2$ for $Z_1$. The vertical distribution of the fine root phytomass decreased from the upper to the deeper soil profiles in the 6 mound types. The fine root phytomass was $43.3{\sim}71.8%$ in a $0{\sim}20cm$ thickness of soil layer and it decreased according to the distance from the nearest trees. The root growth in the improved soil was better than in the reclaimed soil from the sea. However, root growth decreased more in the disturbed soils even though the planting grounds contained the improved soils. The retarded development of roots and the spatial distribution patterns of the fine root phytomass were closely connected to the reclaimed soil from the sea. In the disturbed soil, the soil hardness and alkalic cation($Na^+,\;K^+,\;Ca^{2+},\;Mg^{2+}$). were high and the soil water was lacking. We suggest that the construction of planting grounds and the improvement of bad soil are necessary for the proper and effective growth of landscaping plants.

리듐 2차 전지용 약극활물질 LiFePO₄의 합성 조건에 다른 전기화학적 특성

김도균,박현민,정연욱,이준형,김정주,Kim, Do-Gyun,Park, Hyun-Min,Jeong, Yeon-Uk,Lee, Joon-Hyung,Kim, Jeong-Joo 한국세라믹학회 2006 한국세라믹학회지 Vol.43 No.2

[ $LiFePO_4$ ] is one of the promising materials for cathode material of secondary lithium batteries due to its high energy density, low cost, environmental friendliness and safety. $LiFePO_4$ was synthesized by the solid-state reaction method at 500 - 800°C. The crystal structure of $LiFePO_4$ was analyzed by X-ray powder diffraction. The samples synthesized at 600 and $700^{\circ}C$ showed a single phase of a olivine structure. The particle sizes were increased and the specific surface areas were decreased with heating temperatures. The electrochemical performance was investigated by coin cell test. The discharge capacities at 0.1 C-rate were 118 mAh/g and 112 mAh/g at $600^{\circ}C,\;700^{\circ}C$, respectively. In an attempt to improve the electrical conductivity of cathode materials, $LiFePO_4/graphite$ composite was prepared with various graphite contents. The electrical conductivity and discharge capacity were increased with increasing the graphite contents in composite samples. The rate capabilities at high current densities were also improved.

Study on the Injection System for Cyclotron Mass Spectrometry

김도균,J. Y. Kim,방형찬,C. C. Yun,J. W. Kim 한국물리학회 2011 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.59 No.23

The accelerator mass spectrometry (AMS) based on a cyclotron can be compact and economical compared to the commercial Tandem AMS. However, AMS cyclotrons previously built suffered largely from poor transmission efficiency. To improve the efficiency, it is important for the injection system to match the beam phase space with cyclotron acceptance. We plan to adopt a sawtooth rf buncher for longitudinal phase-space matching and a flat-topping rf system in the cyclotron for a larger phase acceptance. The beam optics for the injection line was studied using TRANSPORT and TRACE-3D, keeping a minimal number of beam line elements. The shapes of extraction electrodes and Einzel lens were simulated using IGUN. A prototype beam line is being constructed so that the beam measurements in comparison with calculation results will be used to reveal an optimal design.

포화지방산계 LB 막의 수평방향에 대한 전기적 특성 비교

김도균,최용성,장정수,권영수 ( Do Kyun Kim,Yong Sung Choi,Jeong Soo Chang,Young Soo Kwon ) 한국전기전자재료학회 1997 한국전기전자재료학회 춘계학술대회논문집 Vol.1997 No.0

연구논문 - 고분자공업분과 : ( 폴리우레탄 / 이소프로필 아크릴아마이드 ) Semi - IPN 하이드로 젤의 제조와 팽윤거동

김도균,조항규,노시태 ( Doh Kyun Kim,Hang Kyu Cho,Si Tae Noh ) 한국공업화학회 1997 한국공업화학회 연구논문 초록집 Vol.1990 No.3

Effect of corrosion on the ultimate strength of double hull oil tankers – Part I: stiffened panels

김도균,박대겸,Jeong Hwan Kim,김상진,김봉주,서정관,백점기 국제구조공학회 2012 Structural Engineering and Mechanics, An Int'l Jou Vol.42 No.4

Age-related problems especially corrosion and fatigue are normally suffered by weatherworn ships and aging offshore structures. The effect of corrosion is one of the important factors in the Common Structural Rule (CSR) guideline of the ship design based on a 20 or 25 years design life. The aim of this research is the clarification of the corrosion effect on ultimate strength of stiffened panels on various types of double hull oil tankers. In the case of ships, corrosion is a phenomenon caused by the ambient environment and it has different characteristics depending on the parts involved. Extensive research considering these characteristic have already done by previous researchers. Based on this data, the ultimate strength behavior of stiffened panels for four double hull oil tankers such as VLCC, Suezmax, Aframax, and Panamax classes are compared and analyzed. By considering hogging and sagging bending moments, the stiffened panels of the deck, inner bottom and outer bottom located far away from neutral axis of ship are assessed. The results of this paper will be useful in evaluating the ultimate strength of an oil tanker subjected to corrosion. These results will be an informative example to check the effect of ultimate strength of a stiffened panel according to corrosion addition from CSR for a given type of ship.