수학자 이상설이 소개한 근대자연과학: <식물학(植物學)>

박영민 ( Young Min Park ),김채식 ( Chae Sik Kim ),이상구 ( Sang Gu Lee ),이재화 ( Jae Hwa Lee ) 한국수학교육학회 2011 수학교육논문집 Vol.25 No.2

본 원고는 2004년 과학사학자 박성래 교수가 독립 운동가이자 한국 근대 수학교육의 아버지로 부르기 시작한 보재 이상설(李相卨, 1870-1917)이 자연과학에 기여한 내용을 다루고 있다. 한국수학사학회지 2009년 11월 호에 자세히 소개된 〈數理〉를 쓴 시기를 전후하여, 같은 시기에 이상설이 붓으로 쓴 것으로 여겨지는 〈植物學>(이상설, 1899)은 총 4면의 초록 필사본이며, 그 대본(臺本)은 〈植物學啓蒙〉 (Edkins, 1886)으로 영국의 Joseph Edkins(艾約瑟, 1823-1905)가 번역하여 1886년에 간행한 〈西學啓蒙〉 16종 가운데 하나이다. 이상설의 〈植物學>은 이 〈植物學啓蒙〉을 읽으면서 그 책의 내용 중 당시의 조 선 학자가 모르고 있던 새로운 내용을 중심으로 메모를 한 것으로 여겨진다. 본 연구에서는 전통산학과 근대서양수학을 연결하는 〈數理〉를 저술했으며. 우리나라의 정규 교과과정에 수학과 과학을 필수과목으로 지정하고, 첫 번째 수학교과서 〈산術新書〉를 발간함으로 당대 최고의 수학자로 평가된 이상설이 쓴 〈植物學〉을 발굴하여 그 내용과 의미를 최초로 분석한다, 이를 통하여 당시 조선의 서양 과학, 특히 식물학에 대한 이해 수준을 분석하고 〈植物學〉의 원전인 〈植物學啓蒙〉 과 <西學啓蒙〉의 저자에 대하여 알아본다. 이는 당시 수학교육자가 자연과학분야에 행한 교육적 기여를 이해 하는데 필수적인 연구이다. This paper deals with contents that Sang-Seol Lee contributed to the natural science in the 19th century Korea. Prof. Sung-Rae Park, the science historian, called Sang-Seol Lee Father of the Modern Mathematics education of Korea. Sang-Seol Lee wrote a manuscript Botany with a brush in late 19th century. Botany was transcribed from Science Primers: Botany (written by J. D. Hooker), which is translated into Chinese by Joseph Edkins in 1886. The existence of Sang-Seol Lee`s book Botany was not known to Korean scientists before. In this paper, we study the contents of Botany and its original text. Also we analyze people`s level of understanding Western sciences, especially botany at that time. In addition, we study authors of 16 Primers for Western Knowledge. We study the contribution of mathematician Sang-Seol Lee to science education in the 19th century Korea.

동맥혈 채혈후 시간 경과 및 온도 변화가 가스분압 및 PH 에 미치는 영향에 관한 연구

김동수,이승환,김건식,강화자,신광일,여민구 대한마취과학회 1989 Korean Journal of Anesthesiology Vol.22 No.6

Blood gas samples are highly susceptible to preanalytic error due to improper methods of obtaining or handling the sample prior to delivery to the laboratory. The errors in the measurement of blood gas analysis are currently derived from the exposure of sample to atmosphere, effects of anticoagulant itself, temperature difference between the measuring electrode and drawn blood and the delay in running the sample. To study the effects of the delay in measuring the sample and the temperature difference between the measuring electrode and drawn blood on values of blood gases and pH, we analyzed the arterial sampling from the 24 patients who were taking elective surgery or on his/her recovery period with indwelling arterial catheter. The plastic sampling syringes were kept at 4。C (refrigerator) or 22。-24。C (room temperature) and analyzed at regular intervals (1, 10, 30, 60,120 min) for 120 minutes. The following results were obtained: 1) When the arterial blood drawn from the anesthetized patients were stored 4。C, partial pressure of oxygen (PaO₂) decreased significantly after 20 min, whereas those stored at room temperature decreased significantly after 10 min. 2) When the arterial blood drawn from the recovery patients were stored at 4。C, PaO₂ did not decrease significantly through the experimental period of 120 min. Although those stored at room temperature did not decrease significantly through the period of 120 min. 3) Partial pressure of carbon dioxide in the arterial blood (PaCO₂,) drawn from the anesthetized patients increased significantly by 120 min. at 4。C, whereas those at room temperature increased significantly after 20 min. 4) PaCO₂, of the recovery patients increased signigicantly by 120 min. at 4。C, whereas those at room temperature increased significantly after 30 min. 5) pH of the arterial blood drawn from either anesthetized or recovery patients decreased significantly by 120 min. at 4。C, whereas those at room temperature decreased significantly after 60 min. 6) No significant changes al oxygen saturation (SaO₂) and content (CaO₂) were noted in either anesthetized or recovery. patients in accordance with time elapsed at 4。C or room temperature. In summary, as the changes of PO₂ in particular higher than physiologic PO₂ and PCO₂ in the arterial blood stored at room temperature are significant in accordance with the delay in measuring, it would be advisable to analyze the sample in a short period of time or to store it in a cool place when the measuring will be delayed.

대장직장 종양에 대한 내시경 점막하 절제술의 연대순 임상 결과와 학습 곡선

이상민 ( Sang Min Lee ),김은수 ( Eun Soo Kim ),박경식 ( Kyung Sik Park ),조광범 ( Kwang Bum Cho ),김동춘 ( Dong Choon Kim ),강유진 ( Yu Jin Kang ),이유진 ( Yoo Jin Lee ),이정민 ( Jung Min Lee ),최은성 ( Eun Sung Choi ),최재혁 ( Ja 대한소화기학회 2014 대한소화기학회지 Vol.64 No.4

Background/Aims: Endoscopic submucosal dissection (ESD) is an effective procedure for en-bloc curative resection of the colorectal tumor. As it requires high technical skills and experience in therapeutic endoscopy, it is important to understand learning curve of ESD technique. The aim of this study was to retrospectively describe the clinical results of ESD and to evaluate learning curve for the ESD of colorectal tumors. Methods: A total of 90 patients with 90 colorectal neoplasms, who had undergone ESD at a tertiary referral hospital from July 2009 to December 2012, were enrolled. The ESD was performed by a single endoscopist. All ESD cases were divided into three periods: first, cases 1-30; second, cases 31-60; and third, cases 61-90. Results: The en-bloc resection rates in third period (100%) was significantly higher than that of the first (93.3%) and second period (80%) (p=0.025). The perforation rate in third period (0%) also significantly decreased compared with that of the first (13.3%) and second period (20%) (p=0.032). To calibrate the difference of tumor size among periods, proficiency was calculated, as the procedure time per specimen area (min/cm2). The proficiency in third period (4.3) was significantly shorter than that of the first (16.8) and second period (10.2) (p=0.004). Conclusions: The learning curve of colorectal ESD in our study shows that at least 60 cases of ESD have to be conducted to acquire sufficient skill of degree without perforation. (Korean J Gastroenterol 2014;64:198-205)

벤조디아제핀 수용체 영상용 양전자 방출 핵종 표지 플루마제닐 유도체 [F-18](3-(2-Fluoro)flumazenil의 합성과 생체 내 분포

장영수,이숙자,강삼식,홍성현,이명철,이동수,정준기,정재민,조정혁 대한핵의학회 1999 핵의학 분자영상 Vol.33 No.6

Purpose: Radiotracers that bind to the central benzodiazepine receptor are useful for the investigation of various neurological and psychiatric diseases. [C-11]Flumazenil, a benzodiazepine antagonist, is the most widely used radioligand for central benzodiazepine receptor imaging by PET. We synthesized 3-(2-[F- 18]fluoro)flumazenil, a new fluorine-18 (t1/2=110 min) labeled analogue of benzodiazepine receptor imaging agent, and evaluated in vivo for biodistribution in mice. Materials and Methods: Flumazenil (Ro 15-1788) was synthesized by a modification of the reported method. Precursor of 3-(2-[F-18]fluoro)flumazenil, the tosylated flumazenil derivative was prepared by the tosylation of the ethyl ester by ditosylethane. [F-18] labeling of tosyl substitued flumazenil precursor was performed by adding F-18 ion at 85℃ in the hot cell for 20 min. The reaction mixture was trapped by C18 cartridge, washed with 10% ethanol, and eluted by 40% ethanol. Bidistribution in mice was determined after intravenous injection Results: The total chemical yield of tosylated flumazenil derivative was ∼40%. The efficiency of labeling 3-(2-[F-18]fluoro)flumazenil was 66% with a total synthesis time of 50 min. Brain uptakes of 3-(2-[F-18]fluoro)flumazenil at 10, 30, 60 min after injection, were 2.5±0.37, 2.2±0.26, 2.1±0.11 and blood activities were 3.7±0.43, 3.3±0.07, 3.3±0.09%ID/g, respectively. Conclusion: We synthesized a tosylated flumazenil derivative which was successfully labeled with no-carrier-added F-18 by nucleophilic substitution.

Comparative evaluation of the algorithms for parametric mapping of the novel myocardial PET imaging agent ¹⁸ F-FPTP

Kim, Ji Who,Seo, Seongho,Kim, Hyeon Sik,Kim, Dong-Yeon,Lee, Ho-Young,Kang, Keon Wook,Lee, Dong Soo,Bom, Hee-Seung,Min, Jung-Joon,Lee, Jae Sung Springer Japan 2017 Annals of nuclear medicine Vol.31 No.6

<P><B>Objective</B></P><P>(<SUP>18</SUP>F-fluoropentyl)triphenylphosphonium salt (<SUP>18</SUP>F-FPTP) is a new promising myocardial PET imaging tracer. It shows high accumulation in cardiomyocytes and rapid clearance from liver. We performed compartmental analysis of <SUP>18</SUP>F-FPTP PET images in rat and evaluated two linear analyses: linear least-squares (LLS) and a basis function method (BFM) for generating parametric images. The minimum dynamic scan duration for kinetic analysis was also investigated and computer simulation undertaken.</P><P><B>Methods</B></P><P><SUP>18</SUP>F-FPTP dynamic PET (18 min) and CT images were acquired from rats with myocardial infarction (MI) (<I>n</I> = 12). Regions of interest (ROIs) were on the left ventricle, normal myocardium, and MI region. Two-compartment (<I>K</I><SUB>1</SUB> and <I>k</I><SUB>2</SUB>; 2C2P) and three-compartment (<I>K</I><SUB>1</SUB>–<I>k</I><SUB>3</SUB>; 3C3P) models with irreversible uptake were compared for goodness-of-fit. Partial volume and spillover correction terms (<I>V</I><SUB><I>a</I></SUB> and <I>α</I> = 1 − <I>V</I><SUB><I>a</I></SUB>) were also incorporated. LLS and BFM were applied to ROI- and voxel-based kinetic parameter estimations. Results were compared with the standard ROI-based nonlinear least-squares (NLS) results of the corresponding compartment model. A simulation explored statistical properties of the estimation methods.</P><P><B>Results</B></P><P>The 2C2P model was most suitable for describing <SUP>18</SUP>F-FPTP kinetics. Average <I>K</I><SUB>1</SUB>, <I>k</I><SUB>2</SUB>, and <I>V</I><SUB><I>a</I></SUB> values were, respectively, 6.8 (ml/min/g), 1.1 (min<SUP>−1</SUP>), and 0.44 in normal myocardium and 1.4 (ml/min/g), 1.1 (min<SUP>−1</SUP>), and 0.32, in MI tissue. Ten minutes of data was sufficient for the estimation. LLS and BFM estimations correlated well with NLS values for the ROI level (<I>K</I><SUB>1</SUB>: <I>y</I> = 1.06<I>x</I> + 0.13, <I>r</I><SUP><I>2</I></SUP> = 0.96 and <I>y</I> = 1.13<I>x</I> + 0.08, <I>r</I><SUP><I>2</I></SUP> = 0.97) and voxel level (<I>K</I><SUB>1</SUB>: <I>y</I> = 1.22<I>x</I> − 0.30, <I>r</I><SUP><I>2</I></SUP> = 0.90 and <I>y</I> = 1.26<I>x</I> + 0.00, <I>r</I><SUP><I>2</I></SUP> = 0.92). Regional distribution of kinetic parametric images (<I>αK</I><SUB>1</SUB>, <I>K</I><SUB>1</SUB>, <I>k</I><SUB>2</SUB>, <I>V</I><SUB>a</SUB>) was physiologically relevant. LLS and BFM showed more robust characteristics than NLS in the simulation.</P><P><B>Conclusions</B></P><P>Fast kinetics and highly specific uptake of <SUP>18</SUP>F-FPTP by myocardium enabled quantitative analysis with the 2C2P model using only the initial 10 min of data. LLS and BFM were feasible for estimating voxel-wise parameters. These two methods will be useful for quantitative evaluation of <SUP>18</SUP>F-FPTP distribution in myocardium and in further studies with different conditions, disease models, and species.</P><P><B>Electronic supplementary material</B></P><P>The online version of this article (doi:10.1007/s12149-017-1171-6) contains supplementary material, which is available to authorized users.</P>

김치유래 젖산균의 균체지방산 분석을 이용한 분류학적 연구

이정숙,정민철,김우식,이근철,김홍중,박찬선,이헌주,주윤정,이근종,안종석,박완,박용하,민태익 한국미생물생명공학회 ( 구 한국산업미생물학회 ) 1996 한국미생물·생명공학회지 Vol.24 No.2

표준균주를 포함한 230여개의 김치유래 젖산균에 대한 균체지방산(FAMEs)을 분석하였다. FAMEs profiles는 Euclidian Distance 17.5에 의해 7개의 Major Cluster와 1개의 Single Cluster로 나뉘어졌다. 이중 A, B, C 및 Cluster는 Leuconostoc속으로 분석되어졌고, F는 Lactobacillus속으로 분석되어졌다. 그리고 E와 G cluster는 두개의 Genus가 혼재되어 나타났으며 보충적인 연구가 필요하다. 앞으로 김치유래 젖산균의 균체지방산 분석결과를 기반으로 한 데이타베이스에 95가지 탄소원을 이용하는 수치분류학적 접근방법 및 Pyrolysis Mass Spectrometry 등의 화학적 분석 방법과 분자친화적 연구를 통한 종합적 분류정보 체계가 갖추어지면 젖산균의 신속, 정확한 동정 및 연구에 활발히 이용되어질 것이다. Two hundreds and thirty lactic acid bacteria, mostly isolated from Kimchi, including type strains were sued for analysis of cellular fatty acids. The 230 test strains were recoverd in 7 major and 1 single clusters defined a Euclidian distance of 17.5. These aggregate taxa were equivalent to the genus Leuconostoc (aggregate group A, B, C and D), and the genera Leuconostoc and Lactobacillus (aggregate group G). It is concluded as evident that FAMEs (Fatty Acid Methyl Esters) profile of cell can be used as a criterion in classification of lactic acid bacterial from kimchi. Additional comparative taxonomic studies need to be carried out on well chosen representative strains to determine the most appropriate methods of value.

Precise determination of the lithium isotope ratio in geological samples using MC-ICP-MS with cool plasma

Choi, Min Seok,Ryu, Jong-Sik,Park, Ha Yan,Lee, Kwang-Sik,Kil, Youngwoo,Shin, Hyung Seon The Royal Society of Chemistry 2013 Journal of analytical atomic spectrometry Vol.28 No.4

<P>Lithium has two naturally occurring isotopes, <SUP>6</SUP>Li and <SUP>7</SUP>Li, with approximate relative abundances of 7.5% and 92.5%, respectively. Due to large Li isotope variations in nature, lithium isotopes have the potential to reveal important information relevant to nuclear technology, biomedicine, astrophysics, and geochemistry. With the advent of multi-collector inductively coupled mass spectrometry (MC-ICP-MS), studies of Li isotopes have largely focused on the analysis of geological materials, with varying degrees of accuracy. However, this technique has often been affected by either baseline interferences or isobaric interferences on mass 6 and 7 during ionization in Ar plasma, which is mainly due to the Li compound with hydrogen gas, and double-charged nitrogen and carbon ions at higher levels of RF power. In this study, we reduced baseline interferences in Ar plasma using a cool plasma (∼800 W) technique with a X-type cone. Lithium was separated using a cation exchange column (BioRad AG50W-X8, 200–400 mesh) with a mixture of 6 N HNO<SUB>3</SUB> and 80% methanol at <0.2 mL min<SUP>−1</SUP> elution speed. The short-term reproducibility of <I>δ</I><SUP>7</SUP>Li values of the NASS-5 seawater standard was 30.55 ± 0.45‰ (2<I>σ</I>, <I>n</I> = 15). Measured <I>δ</I><SUP>7</SUP>Li values of rock and seawater standards ranged from 2.48 to 30.55‰, in good agreements with reported values.</P> <P>Graphic Abstract</P><P>Average <I>δ</I><SUP>7</SUP>Li values of a pure L-SVEC Li solution and one passed through the column were 0.00 ± 0.23‰ (2<I>σ</I>, <I>n</I> = 26) and ¬0.01 ± 0.20 ‰ (2<I>σ</I> , <I>n</I> = 9), respectively, indicating that our chemical separation procedure for Li induces no mass fractionation. <IMG SRC='http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/image/GA?id=c2ja30293d'> </P>

Analysis of Lignans in Acanthopanax sessiliflorus Fruits and Their Fermented Wine by HPLC

Hye-Min Kim,Ju-Sun Kim,Seon-Haeng Cho,Sam-Sik Kang,Dae-Sung Cheoi,Sang-Hyun Lee 한국약용작물학회 2006 한국약용작물학회지 Vol.14 No.5

High performance liquid chromatography (HPLC) was used for the determination of lignans, eleutherosides B and E, in Acanthopanax sessiliflorus fruits and their fermented wine. The lignans were quantified by a reversed-phase system using a gradient of H2O and acetonitrile as a mobile phase within 20 min. The analysis was successfully carried out within 20 min. The contents of eleutherosides Band E as main active principles of Acanthopanax species were measured in A. sessiliflorus fruits (1.15 and 8.49 μg/mg, respectively), their fermented wine (0.45 and 1.33 μg/mg, respectively) and wine residues (no detection).

Analysis of Lignans in Acanthopanax sessiliflorus Fruits and Their Fermented Wine by HPLC

Kim, Hye-Min,Kim, Ju-Sun,Cho, Seon-Haeng,Kang, Sam-Sik,Cheoi, Dae-Sung,Lee, Sang-Hyun The Korean Society of Medicinal Crop Science 2006 韓國藥用作物學會誌 Vol.14 No.5

High performance liquid chromatography (HPLC) was used for the determination of lignans, eleutherosides B and E, in Acanthopanax sessiliflorus fruits and their fermented wine. The lignans were quantified by a reversed-phase system using a gradient of $H_2O$ and acetonitrile as a mobile phase within 20 min. The analysis was successfully carried out within 20 min. The contents of eleutherosides Band E as main active principles of Acanthopanax species were measured in A. sessiliflorus fruits (1.15 and $8.49\;{\mu}g/mg$, respectively), their fermented wine (0.45 and $1.33\;{\mu}g/mg$, respectively) and wine residues (no detection).

열처리에 따른 CVD Cu 박막의 미세구조 및 전기 비저항의 변화

이원준(Won-Jun Lee),민재식(Jae-Sik Min),라사균(Sa-Kyun Rha),이영종(Young-Jong Lee),김우식(Woo-Sik Kim),김동원(Dong-Won Kim),박종욱(Chong-Ook Park) 한국진공학회(ASCT) 1995 Applied Science and Convergence Technology Vol.4 No.2

열처리에 따른 Cu 박막의 미세구조 및 전기 비저항의 변화를 조사하였다. Cu(hfac)(TMVS)를 원료로 하는 저압화학증착법에 의해 증착온도를 160℃에서 330℃까지 변화시키면서 TiN 기판 위에 Cu 박막을 제조하였고 450℃에서 30분간 열처리하였다. 증착온도에 따라 표면이 평평한 Cu 박막을 형성하는 표면 반응제한지역과 표면이 거친 Cu 박막을 형성하는 물질전달제한지역이 관찰되었다. 열처리 후 Cu 박막은 전체적으로 표면이 평탄해졌고 결정립의 크기는 모든 증착온도에서 증가하였는데 그 편차 역시 증가하여 EM 저항성 측면에서는 큰 효과를 보이지 못할 것으로 판단된다. 비저항은 증착온도 200℃에서 급격히 증가하였고 열처리 후에는 모든 증착온도에서 비저항이 감소하였는데 표면반응제한지역에서는 결정립 성장에 의한 약간의 비저항 감소를 보였으나 물질전달제한지역에서는 응집에 의해 Cu 결정립간의 전기적 연결 상태가 향상되어 급격한 비저항 감소를 보였다. The effects of the thermal annealing on the microstructure and the electrical resistivity of the copper films were studied. Copper film was prepared on TiN substrate by the low pressure chemical vapor deposition (LPCVD) using Cu(hfac)(TMVS) as the precursor at the deposition temperature between 160 and 330℃, and then annealed at 450℃ for 30 min. There were two distinct temperature regions, one is the surface reaction limited region, producing smooth surfaced copper film, and the other is the mass transport limited region which produces rough surfaced film. After annealing, the surfaces of the copper films had tendency to become smooth, and the grain size enlarged in all deposition temperature regions. However, the deviation of the grain size was increased too much to improve the EM resistance. The electrical resistivity showed a rapid increase at the deposition temperature of 200℃. After annealing, the resistivity of the copper film deposited in the surface reaction limited region decreased slightly by the grain growth, but ones deposited in the mass transport limited region decreased drastically by coalescence of the grains, causing the improvements of the electrical connections among copper grains.