플라즈마 이온주입기에서의 시변환 쉬스 연구

김곤호,김건우,김영우,최영도,김종식,김상진,한승희,홍문표 漢陽大學校 工學技術硏究所 1998 工學技術論文集 Vol.7 No.1

Abstract- In a plasma source ion implantation, the target is successively biased by negative voltage pulses with an intrinsic finite rise time, resulting in the time-dependent sheath formation around the target. Measurement of time-dependent sheath during the pulse rise show the ion matrix sheath development which is in proportion to square root of time and pulse rise rate over plasma density but independent of the ion mass.

Reports : Structure-activity relationships of the intramolecular disulfide bonds in coprisin, a defensin from the dung beetle

( Jae Ho Lee ),( Da Eun Lee ),( Hye Min Choi ),( Ha Hyung Kim3 ),( Ho Kim ),( Jae Sam Hwang ),( Dong Gun Lee ),( Jae Il Kim ) 생화학분자생물학회(구 한국생화학분자생물학회) 2014 BMB Reports Vol.47 No.11

Defensins, which are small cationic molecules produced by organisms as part of their innate immune response, share a common structural scaffold that is stabilized by three disulfide bridges. Coprisin is a 43-amino acid defensin-like peptide from Copris tripartitus. Here, we report the intramolecular disulfide connectivity of cysteine-rich coprisin, and show that it is the same as in other insect defensins. The disulfide bond pairings of coprisin were determined by combining the enzymatic cleavage and mass analysis. We found that the loss of any single disulfide bond in coprisin eliminated all antibacterial, but not antifungal, activity. Circular dichroism (CD) analysis showed that two disulfide bonds, Cys20-Cys39 and Cys24- Cys41, stabilize coprisin’s α-helical region. Moreover, a BLAST search against UniProtKB database revealed that coprisin’s α-helical region is highly homologous to those of other insect defensins. [BMB Reports 2014; 47(11): 625-630]

AISI D2강 위에 다층으로 증착된 WC-Ti_(1-X)Al_(X)N 코팅의 국부부식 거동에 관한 연구

안승호,이정호,김호건,김정구,한전건 대한금속재료학회 2003 대한금속·재료학회지 Vol.41 No.9

Multilayered WC-Ti_(1-x)Al_(x)N coatings are characterized by periodically repeated structures of lamellae of WC-Ti/WC-Ti_(1-x)Al_(x)N. WC-Ti_(1-x)Al_(x)N coatings of changing Al concentration were deposited on AISI D2 steel by high-ionization sputtered plasma vapor deposition (PVD). The Al concentration could be controlled by using evaporation source for Al and fixing the evaporating rate of other metals. Four kinds of WC-Ti_(1-x)Al_(x)N coatings were prepared: WC-Ti_(0.6)Al_(0.4)N, WC-Ti_(0.53)Al_(0.47)N, WC-Ti_(0.5)Al_(0.5)N and WC-Ti_(0.43)Al_(0.57)N. The corrosion behavior of WC-Ti_(1-x)Al_(x)N coatings was investigated using electrochemical techniques in deaerated 3.5% NaCl electrolyte (galvanic corrosion test, potentiodynamic polarization test, electrochemical impedance spectroscopy and Mott-Schottky method) and surface analyses (GDOES, SEM and EDS). Particular attention was paid to the effect of growth defects on the coating properties related to the corrosion behavior. The results of the coating and substrate galvanic corrosion test showed low galvanic current densities. In the potentiodynamic polarization test and EIS measurement, the corrosion current density of WC-Ti_(0.5)Al_(0.5)N was lower than others and presented higher R_(ct) values than others after 240 h immersion time. This could be attributed to the formation of a Ti oxide, which promotes partial closing of the defects. Capacitance values obtained from EIS as a function of different potentials (C^(-2) vs E) showed that the oxide layer exhibited an n-type semiconductor behavior.

조혈모세포이식 후 발생한 주폐포자층 폐렴에 대한 고찰

주지현,최정현,이동건,백지연,고윤호,이혜정,김세희,신호진,박윤희,박지영,김유진,신완식,김춘추 대한감염학회 2001 감염 Vol.33 No.4

Background : Pneumocytitis cainii pneumonia (PCP) can occur in immunocompromised hosts especially such as AIDS or cancer patients. Although recent research had focused on PCP in AIDS patients, few studies have described the clinical presentations of PCP in recipients of stem cell transplantation (SCT). We evaluated the clinical manifestations of PCP in SCT patients admitted at St. Mary's hospital, Seoul, Korea. Methods : The medical records of 17 PCP patients undergoing SCT between Feb. 1998 and Feb. 2000 were reviewed. The diagnosis of PCP was confirmed through the demonstration of Pneumocytitis cainii via either cytology of brochoalveolar lavage (BAL) or histological technique of lung biopsy. CMV disease and CMV infection were confirmed by BAL culture and antigenemia respectively . Results : Seventeen patients were all recipients of allogeneic SCT and 7 of 17 patients were performed non-sibling SCT. Patients presented with symptoms including brief period (4 ∼23 days) of fever (76%), dyspnea (70%), cough (64%), and signs such as rare(58.8%), Sixteen patients (94%) had been receiving immunosuppressive agent such as cyclosporine A (64%) or Fk506 (35%) without PCP prophylaxis. Eleven patients (64%) were treated with corticosteroid with mean dose of 16 mg/day prednisolone and mean duration of 4.6 months after post-SCT period. Twelve patients were co-infected with CMV. Another co-infected miCroorganisms were Pseudomonas aeruginosa, Mycobacterium tuberculosis, herpes simplex virus, parainfluenza virus, Average duration of treatment with trimethoprim-sulfamethoxazole (TMP/SMX) was 21 ±9 days. Four patients died, and three of them were related with PCP. Conclusion : PCP developed frequently in patients who were taking immunosuppressive drug due to graft versus host disease or were not taking TMP/SMX prophylaxis. High risk patients showing fever, cough, or dyspnea should be considered to take early bronchoscopic intervention for detection of PCP. When treat for PCP, it also be considered to the possibility of coinfection such as CMV. (Korean J Infect Dis 33:273∼279, 2001)

Malachite Green유도체의 합성과 그 항균성에 관한 연구

金浩植,金鍾大,金在根,韓文洙 嶺南大學校附設 基礎科學硏究所 1986 基礎科學硏究 Vol.6 No.-

Malachite Green derivative bearing butyl group was prepared in the form of Leuco base, 4-butyl-4'. 4"-bis(dimethylamino) triphenylmethane, by the condensation reaction of N,N-dimethylaniline with the formyl derivative of butylbenzene, which had been obtained from butylbenzene by chlormethylation followed by oxidation. The butylbenzene was prepared by the alkylation reaction of benzene with n-butyl choride which had been obtained from n-butyl alcohol and zinc chloride. The antimicrobial and antifungal activity of buty-Malachite Green was evaluated in terms of minimum inhibitory concentration by the dilution method. The butyl-Malachite Green showed considerably increasing activity. This activity was stronger than that of hexyl-Malachite Green. This phenomenon suggested that the activities of the alkyl derivatives increase with decrease in the number of carbon in the alkyl group.

편마비 환자의 정상측과 마비측의 비복근 운동점에서의 근육 두께 차이

김동건,도현경,김현동,황지선,정규영,정호중 고신대학교의과대학 2008 고신대학교 의과대학 학술지 Vol.23 No.1

Objective : To investigate any difference of muscle thickness in the motor points of the gastrocnemius between the paretic and non-paretic legs in hemiplegics. Method : Ultrasonography was used to assess in vivo the gastrocnemius muscle thickness at the motor points in the paretic and non-paretic legs of twenty-four patients with stroke. Results : Muscle thickness at the motor points were reduced in the paretic legs compared to the non-paretic legs (p<0.05). There was no correlation between muscle thickness and duration of hemiplegia, site of hemiplegia. However, it did not take regular pattern of the muscular atrophy in the paretic legs. Conclusion : The gastrocnemius muscle of the paretic leg had smaller thickness compared with the non-paretic leg. The present results indicate that paresis in hemiplegics may affect the accuracy of intramuscular injection of botulinum toxin A. Therefore, we recommend ultrasonography for visually controlled, anatomically precise injection of botulinum toxins.

硏削條件에 따른 硏削表面 거칠기와 硏削低抗과의 관계에 대하여

金建鎬 군산대학교 1985 群山水産專門大學 硏究報告 Vol.19 No.3

This study was analyzed by the geometrical theory and experiments on the correlation between the surface roughness and the resistance force in the grinding condition. The results are as follows. 1.The increaser grinding wheel speed, the better effection on the surface roughness and the resistance force . 2.The increaser workpiece speed, grinding depth and feed, the worse effection on the surface roughness and the resistance force.

생체모사환경에서 DLC 필름의 부식마모 특성에 미치는 Si 함량의 영향에 관한 연구

김호건,김우중,김정구,박세준,이광렬 대한금속재료학회 2005 대한금속·재료학회지 Vol.43 No.3

In a method to improve resistance to wear, corrosion and mechanical properties of protective coating, DLC coatings have been extensively studied over the past several years due to their unique combination of properties. Especially, Si-DLC coatings have been attracting increasing interest of researchers since they have a great potential for solving some of the major disadvantages of pure DLC coatings. Si-incorporated diamond-like carbon (Si-DLC) coatings ranging from 0 to 2 at.% were deposited on Ti alloy substrate by means of r.f. plasma-assisted chemical vapor deposition (r.f. PACVD) technique, using mixtures of benzene (C_(6)H_(6)) and silane (SiH_(4)) as the reaction gases. Corrosion and wear behavior of DLC coatings was investigated by electrochemical techniques (potentiodynamic polarization test and electrochemical impedance spectroscopy), tribological techchnique(wear test) and surface analyses (atomic force microscopy, scanning electron microscopy and Raman spectroscopy). It was found that DLC coatings with increasing Si content could acquire improved corrosion and wear resistance in the simulated body fluid environment (0.89 wt.% NaCl of pH 7.4 at 37℃). (Received December 6, 2004)

旋削條件에 있어서 Burr 의 生成에 對한 硏究

金建鎬 군산대학교 1982 群山水産專門大學 硏究報告 Vol.16 No.3

When the metal worked, a burr is produced on the surface edge of workpiece. This study researched the change of burr size on the turning condition and bite geometry through experierment. The result of this study are as follows. 1.The more cutting edge angle, workpiece diameter, and cutting speed increase, the more the size of burr decrease. 2.The more cutting depth increase, the more the size of burr increase. 3.On the feed, the size of burr is nearly constant.

미셀을 이용한 한외여과에서 카드뮴(Cd), 납(Pb) 이온의 제거에 대한 교반시간의 영향

김승건,이호원,강영주 제주대학교 공과대학 첨단기술연구소 2002 尖端技術硏究所論文集 Vol.13 No.2

The objective of this paper is to investigate the effect of mixing time on removal of Cd and Pb in micellar enhanced ultrafiltration with DCA(deoxycholic acid). Permeate flux, rejection ratio of DCA, and removal efficiency of Cd and Pb were gradually increased with increase of mixing times, they had almost reached equilibrium after 1hr of mixing. The rejection ratios of DCA in Cd and Pb solution were 91.6% and 93.8%, respectively. The removal efficiencies of Cd and Pb were 99.7% and 99.9%, respectively.