Ginsenoside Rg3 Suppresses Palmitate-Induced Apoptosis in MIN6N8 Pancreatic β-Cells

Kim, Kyong,Park, Min,Young Kim, Hye the Society for Free Radical Research Japan 2010 Journal of clinical biochemistry and nutrition Vol.46 No.1

<P>Chronic exposure to elevated levels of free fatty acids (FFA) causes β-cell dysfunction and may induce β-cell apoptosis in type 2 diabetes. The execution of β-cell apoptosis occurs through activation of mitogen-activated protein kinases (MAPKs). Ginsenoside Rg3 (Rg3), one of the active ingredients of ginseng saponins, has not been known about the effects on β-cell apoptosis mediated with FFA. The aims of this study were to investigate the <I>in vitro</I> protective effects of Rg3 on MIN6N8 mouse insulinoma β-cells against FFA-induced apoptosis, as well as the modulating effects on p44/42 MAPK activation. Our results showed that Rg3 inhibited the palmitate-induced apoptosis through modulating p44/42 MAPK activation. We conclude that Rg3 has the potential role in suppressing the progression of type 2 diabetes by inhibiting FFA-mediated loss of β-cells.</P>

자바리, Epinephelus bruneus의 난 발생과 부화에 미치는 수온의 영향

양문호,최영웅,정민민,구학동,오봉세,문태석,이창훈,김경민,한석중,Yang, Moon-Ho,Choi, Young-Ung,Jung, Min-Min,Ku, Hag-Dong,Oh, Bong-Sae,Moon, Tae-Seok,Lee, Chang-Hoon,Kim, Kyong-Min,Han, Seock-Jung 한국발생생물학회 2007 발생과 생식 Vol.11 No.2

This study examined temperature effect in egg development and hatching of longtooth grouper, Epinephelus bruneus. Fertilized embryos was not growth after morula stage at $15^{\circ}C$, at 18, 21, 24 and $27^{\circ}C$, the required time from fertilized embryos to hatching were 70 h. 30 min., 44 h. 10 min., 29 h. 10 min. and 24 h. 30 min., respectively. The hatching rates at $24^{\circ}C$ were higher than the other conditions and the hatching was not occurred at $15^{\circ}C$. These results suggest that the water temperature range of egg development and hatching was $18{\sim}27^{\circ}C$. 이 연구는 실내 사육수조에서 자연산란 후 수정된 난을 대상으로 수온에 따른 난 발생속도와 부화율을 조사하였다. 부화에 이르기까지 각 수온조건에서 소요된 시간은 $15^{\circ}C$에서 상실기 이후 발생이 진행되지 않았고, 18, 21, 24, $27^{\circ}C$에서 각각 70시간 30분, 44시간 10분, 29시간 10분 그리고 24시간 30분이 소요되었다. 부화율은 $15^{\circ}C$에서 0%였고, 18, 21, 24 그리고 $27^{\circ}C$에서 각각 $8.3{\pm}1.2%$, $18.0{\pm}6.2%$, $24.0{\pm}4.0%$ 그리고 $17.0{\pm}7.2%$로 뚜렷한 차이 없이 $24^{\circ}C$에서 다소 높았고 21와 $27^{\circ}C$에서 비슷한 경향이었으며 $18^{\circ}C$에서 가장 낮게 나타났다. 이러한 결과에서 자바리의 난발생 수온범위는 $18{\sim}27^{\circ}C$로 제안된다.

가토에서 Vecuronium bromide 의 용량에 따른 근육이완 효과

김동원,이동호,민경호,전세웅,유희구,김경헌,승익상,김교상,서정국 대한마취과학회 1987 Korean Journal of Anesthesiology Vol.20 No.6

The introduction of muscle relaxants was an epoch making event in the development of clinical anesthesia and their use has hecame essential to anesthesia practice. Vecuronium, one of the newest muscle relaxants, many advantages; it is .apid acting, non-accumulating, has minimals side reactions and is promptly antagonized by anticholinesterases. However, its pharmacological effect, like other conventional muscle relaxants depends upon the dose and is influenced br many factors including body temperature, blood flow, interaction with other drugs, antibiotics, diuretics and so forth, To obtain a dose·response relationship which is important for clinical use, the effect of the vecuronium in various doses on the neuromuscular block in rabbits was investigated. The results were as follows. 1) In the vecuronium 0.025 mg/kg group, maximal twitch depression was varied between 75 to 92% with a mean value of 84,9%. The spontaneous recovery index was 141.0 seconds (2.35 min). 2) In the vecuranium 7.75 mg/kg group, thmean maximum twitch depression and spontaneous recovery index were 98.4% and 218.6 seconds (3.64 min.) respectively. 3) In the vecuronium 7.1 mg/kg group, maximum twitch depression was 100% and the spontaneous recovery index was markedly prolonged to 627.8 seconds (10.35 min).

AC8A-T6 알루미늄 合金材의 切削加工 特性에 關한 硏究

최현민,김경우,김우순,김용환,김동현,채왕석 한국공작기계학회 2002 한국공작기계학회 추계학술대회논문집 Vol.2002 No.-

In this study, examined the cutting characteristics of alumuminum alloy AC8A-T6 that is used to present car piston materials. And in been holding materials machining empirically escape as result that experiment comparison changing the cutting speed and feed on various condition to choose efficient machining condition. The following results can be summarized from this research. 1.As the cutting speed decreased, principal cutting force and thrust cutting force is increased, and reason that cutting force interacts greatly in the low cutting speed is thought by result by BUE's stabilization. 2.The feed speed and cutting speed increase, friction factor is decrescent and the cause appeared the thrust cutting force is fallen than cutting force relatively because chip flow according to increase of the feed rate is constraint. 3.Though specific cutting resistance grows cutting area and the feed rate are few, the cause was expose that shear angle decreases by rake face of tool gets into negative angle remarkably as wear of a cutting tool or defect part of workpiece is cut. 4.Cutting speed do greatly depth of cut is slow, surface roughness examined closely through an experiment that becomes bad, and know that it can get good surface that process cutting speed because do feed rate by 0.1㎜/rev low more than 250m/min to get good surface roughness can.

High-performance Liquid Chromatographic Analysis for Quantitation of Marker Compounds of Artemisia capillaris Thunb

( Kyung Min Park ),( Ying Li ),( Bora Kim ),( Haiyan Zhang ),( Kyong Hwangbo ),( Dong Gen Piao ),( Mei Juan Chi ),( Mi Hee Woo ),( Jae Sue Choi ),( Je Hyun Lee ),( Dong Cheul Moon ),( Hyeun Wook Chang 영남대학교 약품개발연구소 2013 영남대학교 약품개발연구소 연구업적집 Vol.23 No.0

Two stable high-performance liquid chromatography (HPLC) methods were developed that could quantitatively analyze 10 major marker compounds of Artemisia capillaris Thunb and could also distinguish among `Injinho` and `Myeon-injin` and `Haninjin`--A. capillaris collected in autumn, A. capillaris collected in spring and A. iwayomogi, which can be misused as `Injinho` in Korean herbal drug markets. The first HPLC method was a reversed-phase chromatography using a C18 column with an isocratic solvent system of phosphoric acid (0.05%) and acetonitrile at the flow rate of 1.0 mL/min, ultraviolet (UV) detection wavelength at 254 nm and column temperature at 40°C. Calibration andquantitation were made by using acetaminophen as an internal standard (I.S-A) and chlorogenic acid (1) was determined within 20 min. The second HPLC method was a reversed-phase chromatography using a C18 column with a gradient solvent system of phosphate buffer (0.015 M, pH 6) and acetonitrile at the flow rate of 1.0 mL/min, UV detection wavelength at 254 nm and column temperature at 40°C. Calibration and quantitation were made by using ethylparaben as an internal standard (I.S-B) and 3,5-di-O-caffeoylquinic acid (2), 3,4-di-O-caffeoylquinic acid (3), 4,5-di-O-caffeoylquinic acid (4), hyperoside (5), isoquercitrin (6), isorhamnetin 3-O-robinobioside (7), isorhamnetin-3-O-galactoside (8), isorhamnetin-3-O-glucoside (9) and scoparone (10) were determined within 60 min. Pattern recognitionanalysis of data from the 60 samples classified them clearly into three groups. These assay methods could be applied for QA/QC of A. capillaris and Artemisia iwayomogi.

High-performance Liquid Chromatographic Analysis for Quantitation of Marker Compounds of Artemisia capillaris Thunb.

Kyung Min Park,손종근,Ying Li,Bora Kim,Haiyan Zhang,Kyong Hwangbo,Dong Gen Piao,Mei Juan Chi,우미희,최재수,이제현,문동철,장현욱,김재룡 대한약학회 2012 Archives of Pharmacal Research Vol.35 No.12

Two stable high-performance liquid chromatography (HPLC) methods were developed that could quantitatively analyze 10 major marker compounds of Artemisia capillaris Thunb and could also distinguish among ‘Injinho’ and ‘Myeon-injin’ and ‘Haninjin’ – A. capillaris collected in autumn,A. capillaris collected in spring and A. iwayomogi, which can be misused as ‘Injinho’ in Korean herbal drug markets. The first HPLC method was a reversed-phase chromatography using a C18 column with an isocratic solvent system of phosphoric acid (0.05%) and acetonitrile at the flow rate of 1.0 mL/min, ultraviolet (UV) detection wavelength at 254 nm and column temperature at 40oC. Calibration and quantitation were made by using acetaminophen as an internal standard (I.S-A) and chlorogenic acid (1) was determined within 20 min. The second HPLC method was a reversed-phase chromatography using a C18 column with a gradient solvent system of phosphate buffer (0.015 M, pH 6) and acetonitrile at the flow rate of 1.0 mL/min, UV detection wavelength at 254 nm and column temperature at 40oC. Calibration and quantitation were made by using ethylparaben as an internal standard (I.S-B) and 3,5-di-O-caffeoylquinic acid (2), 3,4-di-O-caffeoylquinic acid (3), 4,5-di-O-caffeoylquinic acid (4), hyperoside (5), isoquercitrin (6), isorhamnetin 3-O-robinobioside (7), isorhamnetin-3-O-galactoside (8), isorhamnetin-3-O-glucoside (9) and scoparone (10) were determined within 60 min. Pattern recognition analysis of data from the 60 samples classified them clearly into three groups. These assay methods could be applied for QA/QC of A. capillaris and Artemisia iwayomogi.

고등어(Scomber japonicus ) 치어의 마취제로서 Clove oil, MS-222 및 2-Phenoxyethanol의 평가

한석중 ( Seock Jung Han ),김경민 ( Kyong Min Kim ),최낙중 ( Nack Jung Choi ),구준호 ( Jun Ho Koo ),박충국 ( Chung Kug Park ),이원교 ( Won Gyo Lee ),지승철 ( Seung Chul Ji ) 한국수산과학회(구 한국수산학회) 2011 한국수산과학회지 Vol.44 No.6

The efficiency of clove oil, MS-222, and 2-phenoxyethanol was evaluated as anesthetics in juvenile Scomber japonicus . Stage A5 of anesthesia was assumed to be sufficient for conducting routine aquaculture procedures in less than 3 min, with recovery (stage R5) in less than 5 min. The lowest effective doses of the three anesthetics were 50 mg L-1 clove oil (anesthetic time of 71.3 s and recovery time of 167.0 s), 100 mg L-1 MS-222 (anesthetic time of 70.7 s and recovery time of 115.7 s), and 400 mg L-1 2-phenoxyethanol (anesthetic time of 86.7 s and recovery time of 95.0 s). Anesthetic times decreased with increasing doses for all three anesthetic agents, and fish anesthetized with clove oil exhibited the longest recovery times. After 30 min, the highest plasma cortisol and lactate levels were detected with the use of clove oil, whereas the lowest values were observed with 2-phenoxyethanol. In addition, high glucose levels were maintained during recovery with clove oil, but the treatments did not significantly differ. The most effective of the three anesthetic agents was 2-phenoxyethanol, although all were considered acceptable for use in cultures of juvenile Scomber japonicus

Surface Modification of Block Copolymer Through Sulfur Containing Plasma Treatment

Choi, Sang Wook,Shin, Jae Hee,Jeon, Min Hwan,Mun, Jeong Ho,Kim, Sang Ouk,Yeom, Geun Young,Kim, Kyong Nam American Scientific Publishers 2015 Journal of Nanoscience and Nanotechnology Vol.15 No.10

<P>Some of the important issues of block copolymer (BCP) as an application to the potential low cost next generation lithography are thermal stability and deformation during pattern transfer process in addition to defect density, line edge/width roughness, etc. In this study, sulfur containing plasma treatment was used to modify the BCP and the effects of the plasma on the properties of plasma treated BCP were investigated. The polystyrene hole pattern obtained from polystyrene polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) was initially degraded when the polystyrene hole was annealed at 190 degrees C for 15 min. However, when the hole pattern was treated using sulfur containing plasmas using H2S or SF6 up to 2 min, possibly due to the sulfurization of the polystyrene hole surface, no change in the hole pattern was observed after the annealing even though there is a slight change in hole shapes during the plasma treatment. The optimized plasma treated polystyrene pattern showed the superior characteristics as the mask layer by showing better thermal stability, higher chemical inertness, and higher etch selectivity during plasma etching.</P>

본태성 고혈압 환자의 적혈구 Na+-Li+ Countertransport 와 적혈구막 지방산 구성에 대한 연구

이영우,고경수,고재준,박경수,김원배,한은경,김성연,조보연,이홍규,고창순,민현기 한국지질학회 1991 韓國脂質學會誌 Vol.1 No.1

Since the changes of Na^+-Li^+ countertransport (SLC) Vmax in essential hypertension have been reported. it has been known that hyperlipidemia could affect SLC independently of blood pressure. To reveal the relation between SLC Vmax and RBC membrane fatty acid conposition in the hypertensive patients, we divided patients into two groups according to their levels of SLC Vmax of erythrocytes(elevated SLC Vmax: n=4, normal SLC Vamx: n=6). The results were as follows: 1) There was no difference in body mate index, waist-hip ratio, blood pressure, serum cholesterol level between two groups. Triglyceride were higher in elevated group (278.0±180.0 ㎎/㎗) than normal group (124.3±60.7 ㎎/㎗) but there was no statistical significance. HDL-cholesterol levels were significantly lower in elevated group (32.0±3.6 vs. 44.8±8.9 ㎎/㎗) and free fatty acid concentrations, intracellular (RBC) Na^+ concentrations were similar between two groups. 2) The results of oral glucose tolerance test showed no differences in the glucose and insulin area, however the incremental insulin areas of elevated group (108.8±31.3, μU. min/㎖×10²) were significantly higher compared with those of normal group (56.3±20.7 μU. min/㎖×10²). 3) In the elevated group, palmitic acid proportions of erythrocytes (22.1±0.7%) were higher than those of normal group (20.1±0.7%) and SLC Vmax showed significant correlation (r=0.81, p$lt;0.01) with palmitic acid proportion. These results suggest that the abnormal lipid metabolism may change the RBC Na^+ transport system through the alterations of RBC membrane fatty acid composition.

Layer-controlled thinning of black phosphorus by an Ar ion beam

Park, Jin Woo,Jang, Sung Kyu,Kang, Dong Ho,Kim, Doo San,Jeon, Min Hwan,Lee, Won Oh,Kim, Ki Seok,Lee, Sung Joo,Park, Jin-Hong,Kim, Kyong Nam,Yeom, Geun Young Royal Society of Chemistry 2017 Journal of Materials Chemistry C Vol.5 No.41

<▼1><P>BP thinning was carried out using a monoenergetic Ar<SUP>+</SUP> ion beam and the BP could be thinned without damaging the surface.</P></▼1><▼2><P>Black phosphorus (BP) is one of the most interesting two-dimensional (2D) layered materials due to its unique properties, including a band gap energy change from 0.3 eV (bulk) to 2.0 eV (monolayer) depending on the number of BP layers, for application in nanoelectronic devices. In general, 2D layered materials including BP have limitations in terms of synthesis due to the process factors such as time, temperature, <I>etc.</I>, and thus, a thinning technique from the bulk material to a 2D material needs to be used while controlling the removed layer thickness. In this study, layer-controlled thinning of BP was performed by using a controlled Ar<SUP>+</SUP> ion beam method and the BP thinning characteristics were investigated. By using the near monoenergetic ion energy in the range of 45–48 eV, BP could be thinned with the thinning rate of ∼0.55 nm min<SUP>−1</SUP> down to bilayer BP without increasing the surface roughness and without changing the chemical binding states. The BP oxide on the pristine BP could also be successfully removed using the same Ar<SUP>+</SUP> ion beam. 2D BP field-effect transistors (FETs) fabricated with the thinned bilayer–10-layer BPs exhibited electrical characteristics similar to those of pristine BP FETs suggesting no electrical damage on the BP layers thinned by the controlled monoenergetic Ar<SUP>+</SUP> ion beam.</P></▼2>