Collagenase와 esterase가 상아질 접착강도와 nanoleakage에 미치는 영향

정영정,한세현,김종철,이상훈,김정욱,김영재,장기택 大韓小兒齒科學會 2008 大韓小兒齒科學會誌 Vol.35 No.3

본 연구는 상아질 접착계면에서 collagenase와 esterase가 접착강도와 극미세누출에 미치는 영향을 살펴보기 위해 시행하였다. 발치된 치아의 교합면 상아질에 Single Bond 2(SB)와 Clearfil SE bond(SE)를 사용하여 상아질-레진 접착시편을 제작하고,시편을 인산완충용액(PBS)에 24시간(I),또는 PBS(II),collagenase 용액(III),esterase 용액(IV)에 4주간 보관 한 후 질산은 용액으로 염색하였다. 시편의 미세인장접착강도(μTBS)와 질산은 침투 면적을 측정하여 다음과 같은 결과를 얻었다. 1. SB군의 접착강도가 II∼IV군에서 SE군에 비해 낮은 값을 나타내었다(p<O.05). SB군은 II∼IV군의 접착강도가 I군에 비해 낮은 값을 보였으나(p<O.05),SE군의 접착강도는 I∼IV군간에 차이를 보이지 않았다(p>O.05). 2. SB군의 질산은 침투 면적이 SE군에 비해 높았으며(p<O.05),SB군과 SE군에서 질산은 침투 면적은 I ∼ IV군간에 차이를 보이지 않았다(p>O.05). 3. 접착강도와 질산은 침투 면적은 SE군의 I, II,III군에서 음의 상관관계를 보였다(p<O.05). The purpose of this study was to evaluate the effects of collagenase and esterase on dentin bond strength and nanoleakage. Resin composites were bonded to occlusal dentin of premolars with Single Bond 2(SB) and Clearfil SE Bond(SE). After the microtensile specimens were prepared and stored in PBS for 24 hours(I) or, PBS(II), collagenase(III), esterase(IV) solution for 4 weeks, the specimens were stained with silver nitrate solution. Microtensile bond strength(μTBS) and silver penetration area were measured and, the results were as follows: 1. For group II, III, and IV, the bond strengths of SB were lower than those of SB(p<0.05). The bond strengths of SB II, III, and IV were lower than that of SB I(p<0.05). There was no difference among the bond strengths of SE I ∼ IV groups(p>0.05). 2. Silver penetration areas of SB were higher than those of SE for all storage groups(p<0.05). In SB and SE groups, there was no significant difference of silver penetration area among I ∼ IV groups(p>0.05). 3. SE I, II, and III showed inverse relationship between the bond strengths and the silver penetration areas(p<0.05).

상아질 접착에서 collagenase와 esterase가 미세인장결합강도에 미치는 영향

정영정,현홍근,김영재,김정욱,이상훈,김종철,한세현,장기택 대한소아치과학회 2007 大韓小兒齒科學會誌 Vol.34 No.2

상아질-레진 접착강도에 대한 collagenase와 esterase의 영향을 살펴보기 위해, 소구치의 교합면 상아질에 Single Bond 2와 Clearfil SE Bond로 접착을 시행하고 미세 시편을 제작하여 PBS, collagenase 용액, esterase 용액에 4주간 보관한 후 미세인장결합강도를 측정, 비교하여 다음과 같은 결론을 얻었다. 1. 모든 보관 용액에서 Single Bond 2의 미세인장결합강도는 Clearfil SE Bond보다 유의하게 낮았다(p<0.05). 2. Single Bond 2의 미세인장결합강도는 collagenase군이 PBS군, esterase군보다 낮았다(p>0.05). 3. Clearfil SE Bond의 미세인장결합강도는 esterase군이 PBS군에 비해 낮았으나(p>0.05), collagenase군보다는 높았다(p>0.05). Collagenase군은 PBS군에 비해 유의하게 낮은 미세인장결합강도를 보였다(p<0.05). The purpose of this study was to evaluate the effect of collagenase and esterase on the microtensile bond strength (μTBS) in dentin bonding. After resin composites were bonded to occlusal dentin, μTBS specimens were formed and stored in PBS, collagenase, or esterase solution. After 4-week storage, μTBS was determined and, the results were as follows: 1. μTBS values of Single Bond 2 were lower than those of Clearfil SE Bond for all storage medium (p<0.05). 2. In single Bond 2 group, collagenase solution lowered bond strength more than PBS and esterase solution (p>0.05). 3. In Clearfil SE Bond group, esterase solution lowered bond strength more than PBS(p>0.05). Collagenase solution lowered bond strength more than esterase solution(p>0.05) and PBS(p<0.05).

나노 충전제 함량에 따른 복합레진의 표면 미세경도 차이

정영정,김연재,김정욱,이상훈,김종철,한세현,장기택 大韓小兒齒科學會 2005 大韓小兒齒科學會誌 Vol.32 No.1

최근에 개발된 나노 충전제를 microhybrid 복합레진에 첨가할 때, 나노 충전제 함량이 중합에 미치는 영향을 조사하기 위해, 실험적으로 나노 충전제의 함량을 다르게 제작한 복합레진에서 광중합 후 미세경도를 측정, 분석하여 다음과 같은 결론을 얻었다. 1. 나노 충전제의 함량이 2%, 3%인 군은 0%, 1%인 군에 비해 중합된 면의 미세경도가 유의하게 높았으나(p<0.01), 그 차이는 크지 않았다. 2. 나노 충전제의 함량이 높을수록 레진 시편의 하면에서의 미세경도는 증가하였으며, 나노 충전제의 함량이 0%, 1%, 2%간에, 0%, 1%, 3%간에 유의한 차이가 있었고(p<0.01), 2%와 3%간에는 차이가 없었다(p<0.05). 3. 레진 시편의 상면과 하면의 미세 경도 차이는 나노 충전제 함량이 높을수록 감소하였으며, 나노 충전제의 함량이 0%, 1%, 2%간에, 0%, 1%, 3%간에 유의한 차이가 있었고(p<0.01), 2%와 3%간에는 차이가 없었다(p<0.05). The objective of this study was to evaluate the effects of nanofiller content on the microhardness and polymerization of experimental microhybrid composites. The nanofiller contents in the experimental composites were varied (0%, 1%, 2%, 3%), while the total filler content remained constant as 76 %wt. We obtained the following results: 1. The microhardness of the top surface for the 2%, 3% nanofilled microhybrid composites were significantly higher than those for the 0%, 1% nanofilled composites (p<0.05), but the difference was not great. 2. The microhardness of the bottom surfaces significantly increased with an increase in the nanofiller level (p<0.05), except between the 2% and 3% nanofilled groups (p>0.05). 3. As the nanofiller level increased, the difference beween microhardness of top and bottom surfaces significantly decreased (p<0.05), except between 2% and 3% nanofilled groups (p>0.05).

Synthesis and Nanostructures of Metal Selenide Precursors for Cu(In,Ga)Se₂Thin-Film Solar Cells

Cha, Ji-Hyun,Noh, Se Jin,Jung, Duk-Young Wiley (John WileySons) 2015 ChemSusChem Vol.8 No.14

<P>A nanoink solution-based process was developed as a low-costing method for the fabrication of Cu(In,Ga)Se2 (CIGSe) thin-film photovoltaic cells. The sonochemical synthesis of CIGSe nanocrystals of the nanoink through step-by-step mixing of the reactants was investigated. To achieve the ideal stoichiometry of Cu(In0.7 Ga0.3 )Se2 to tune the bandgap and to fabricate high-efficiency photovoltaic cells, the synthetic parameters, the concentration of hydrazine, and the amount used of the gallium precursor were investigated. As the hydrazine concentration increased, gallium loss was observed in the CIGSe product. The gallium content in the reactant mixture strongly affected the metal stoichiometry of the prepared CIGSe nanocrystals. The nanoink solution based fabrication of thin-film photovoltaic cells was also explored, and the resulting device showed a conversion efficiency of 5.17?%.</P>

사이버대학의 오프라인시설 계획에 관한 연구 : 국내 7개 사이버대학의 사례를 중심으로 Focus on 7 cyber university cases in Korea

정성원,이세영 대한건축학회 2004 대한건축학회논문집 Vol.20 No.1

Currently, researches on cyber universities are only Limited on subjects like education, informational technology, due to its unique on-line based character. There are social consensuses and needs for researches on off-line facilities of cyber universities such as recent discussions on appropriate size of off-line facilities, and managers and students request for upgrading off-line facilities on the topic. However no serious effort has been put into researches on architectural planning of it. This paper has selected 7 cyber universities in Korea that existed for more than 3 years, and analyzed their off-line facilities to understand current architectural facilities conditions. In addition to above, this paper interviewed actual users (i.e., students, managers and professors) for suggestion on user-oriented criteria on architectural planning and basic architectural program for the future cyber universities.

콩 단백질/펙틴/몬모릴로나이트 나노복합 필름의 특성 및 산소 투과도 연구

정세환,김성철,조규순,신용섭,장상희,홍기헌,이태진,신부영 嶺南大學校 工業技術硏究所 2004 工業技術硏究所論文集 Vol.32 No.2

In this study, Mechanical property, thermal property, watervapor, and oxygen permeability of biodegradable Soy protein/Pectin-montmorillonite nanocomposite, prepared with Na^(+)-MMT, have been studied. X-ray diffraction and TEM experiments an polymer/silicate composite samples demonstrated that the intercalation of polymer chains leads to increase in the spacing between silicate layers. In addition, it were found that the intercalated Soy protein/Pectin/montmorillonite nanocomposite were prepared. It was found that the addition of only a small of clay was enough to improve the thermal stability and mechanical property of Soy protein/Pectin/montmorillonite nanocomposite. watervapor of Soy protein/Pectin/montmorillonite nanocomposite was generally lower than that of Soy protein/Pectin. oxygen permeability of Soy protein/Pectin/montmorillonite nanocomposite was generally lower than that of Soy protein/Pectin.

MANET 라우팅 프로토콜 QoS 지원서비스의 성능평가에 관한 연구

鄭燦赫,金鉉郁,李光培,姜景仁,朴京培,劉忠烈,吳世德,裵振勝,趙榮泰 明知大學校 産業技術硏究所 2004 産業技術硏究所論文集 Vol.23 No.-

In this paper, we evaluated two main QoS supporting routing protocol on wireless ad hoc network. At presence, wireless mobile communication focuses on how to efficiently support mobility of users more than QoS guarantee. However, in order to satisfy requirement of various applications which have been or will be served, QoS support service between source and destination becoming a very important issue. Of all routing protocols, DSR and AODV are very important routing protocol in MANET. So we simulated DSR and AODV QoS Routing Protocol Through simulation evaluation tool NS(Network Simulation) based on various environments.

탄성반력의 영향에 따른 직교 이방성 복합판의 고유 진동 해석

정영화,심도식,김경진,이세진 江原大學校 産業技術硏究所 1997 産業技術硏究 Vol.17 No.-

In this paper, the result of application of vibration method to the orthotropic plates with free edges supported on elastic foundation and with a pair of opposite edges under axial forces is presented. Such plates represent the concrete highway slab and hybrid composite pavement of bridges. The reinforced concrete slab can be assumed as a special orthotropic plate, as a close approximation. The highway slab is supported on elastic foundation, with free boundaries. Sometimes, the pair of edges perpendicular to the traffic direction amy be subject to the axial forces. The plate is subject to the concentrated load/loads, in the form of traffic loads, or the test equipments. Finite difference method is used to obtain the deflection influence surfaces needed for vibration analysis. The influence of the modulus of the foundation, the aspect ration of the plate, and the magnitudes of the axial forces and the concentrated attached mass on the plate, under the natural frequency is thoroughly studied.

브레이징 온도 변화에 따른 ZrO2와 Ti-6Al-4V의 접합 특성

기세호,박상윤,허영구,정재필,김원중 大韓齒科補綴學會 2012 대한치과보철학회지 Vol.50 No.3

Purpose: In this study, brazing characteristics of ZrO2 and Ti-6Al-4V brazed joints with increasing temperature were investigated. Materials and methods: The sample size of the ZrO2 was 3 mm × 3 mm × 3 mm (thickness), and Ti-6Al-4V was 10 mm (diameter) × 5 mm (thickness). The filler metal consisted of Ag-Cu-Sn-Ti was prepared in powder form. The brazing sample was heated in a vacuum furnace under 5 × 10-6 torr atmosphere, while the brazing temperature was changed from 700 to 800℃ for 30 min. Results: The experimental results shows that brazed joint of ZrO2 and Ti-6Al-4V occurred at 700 - 800℃. Brazed joint consisted of Ag-rich matrix and Cu-rich phase. A Cu-Ti intermetallic compounds and a Ti-Sn-Cu-Ag alloy were produced along the Ti-6Al-4V bonded interface. Thickness of the reacted layer along the Ti-6Al-4V bonded interface was increased with brazing temperature. Defect ratios of ZrO2 and Ti-6Al-4V bonded interfaces decreased with brazing temperature. Conclusion: Thickness and defect ratio of brazed joints were decreased with increasing temperature. Zirconia was not wetting with filler metal, because the reaction between ZrO2 and Ti did not occur enough. 연구 목적: 온도 변화에 따른 ZrO2와 Ti-6Al-4V의 접합 특성에 대해 알아보기 위하여 새로운 브레이징 합금을 제조하고, 브레이징 온도가 접합 특성에 미치는 영향에 대하여 조사하고자 하였다. 연구 재료 및 방법: 본 연구에서 사용된 시편으로는 실험용 ZrO2 모재(ZirBlank-PS, Acucera, Inc., Gyeonggi-do, Korea)는 소결 전의 블록형태(65 mm × 36 mm × 12 mm (t))이며, 이를 잘라 사포(#2400)로 표면연마 후 소결하였다. 소결된 ZrO2 시편의 크기는 3 mm × 3 mm × 3 mm (t) 이다. Ti-6Al-4V 모재(Ti 6Al 4V ELI CG Bar, TMS, Washington, USA)는 직경 10 mm × 5 mm (t)를 사용하였다. 소결된 ZrO2와 Ti-6Al-4V의 접합을 위하여 브레이징 합금을 제조하였다. 시편을 3군으로 나누어A군은 700℃에서, B군은 750℃에서, C군은 800℃에서 각각 브레이징 하였다. 브레이징 부의 두께와 결함율의 측정은 각 군당 하나의 시편으로 각 시편 당 5회씩 반복 측정하여 평균값을 취하였다. 결과: 브레이징 합금을 사용하여 진공 브레이징을 수행한 결과 ZrO2 와 Ti-6Al-4V 는 700℃ - 800℃에서 양호한 접합을 보였다. 브레이징 후 브레이징 온도 변화에 따른 브레이징 부의 두께 및 결함율의 변화는SEM을 사용하여 측정하였다. 브레이징 온도가 700℃에서 800℃로 증가함에 따라 CuTi 금속간 화합물 층 및 Ti-Sn-Cu-Ag계 화합물 층의 두께는 각각 4.5 ㎛에서 10.3 ㎛로, 3.1 ㎛에서 5.0 ㎛로 증가되었다. 또한 브레이징 온도가 700℃에서 800℃로 증가함에 따라 브레이징 접합계면의 결함율은 ZrO2 및 Ti-6Al-4V 계면에서 각각25%에서 16.3%, 5%에서 1.5%로 감소되었다. 결론: 브레이징 온도가 700℃에서 800℃로 증가됨에 따라, 브레이징 접합계면의 결함율은 ZrO2 및 Ti-6Al-4V 계면에서 모두 감소되었다. 이는 결함부에서 ZrO2와 활성원소인 Ti과의 반응이 충분히 일어나지 않아서 브레이징 합금이 ZrO2에 웨팅되지 않은 것이 원인이라고 사료된다.

복강내에 발생한 다발성 혈관종 : 증례 보고

정갑중,김형호,최홍조,김영훈,조세헌,정진숙,남경진,김상순 동아대학교의과대학 1992 동아의대학술지 Vol.4 No.1