http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
포트홀 탐지 정확도 향상을 위한 Saliency Map 기반 포트홀 탐지 알고리즘
조영태,류승기 한국ITS학회 2016 한국ITS학회논문지 Vol.15 No.4
포트홀은 차량파손과 교통사고 유발 등의 사회문제를 유발시키고 있다. 포트홀을 효율적으로 관리하기 위해서는 빠르게 포트홀을 찾아내는 기술이 가장 중요하다. 기존의 포트홀 탐지 기법은 민원에 의한 수동식 신고방식을 사용하고 있어, 포트홀로 인해 발생하는 문제를 사전에 예방하지 못하고 있다. 최근 포트홀을 저비용으로 빠르게 탐지하기 위하여 영상 카메라를 이용한 연구가 많이 진행되고 있다. 본 논문에서는 사전에 연구되었던 포트홀 탐지 알고리즘의 탐지 정확도를 개선하기 위한 Saliency Map 기반의 알고리즘을 제안한다. 기존 알고리즘은 포트홀이 그림자와 겹쳐있거나 포트홀의 내부 모양이 주변 도로노면과 비슷한 형태를 가지는 등의 복잡한 환경에서 포트홀을 탐지하지 못하는 문제를 가지고 있다. 이러한 문제를 해결하기 위하여 제안하는 알고리즘은 Saliency Map 알고리즘을 이용하여 보다 정확한 포트홀 후보 영역을 찾는다. 제안 알고리즘은 포트홀 후보영역 추출부와 결정부로 구성되며, 실험을 통하여 기존 알고리즘보다 더 높은 탐지 정확도를 가짐을 보인다. Potholes have caused diverse problems such as wheel damage and car accident. A pothole detection technology is the most important to provide efficient pothole maintenance. The previous pothole detections have been performed by manual reporting methods. Thus, the problems caused by potholes have not been solved previously. Recently, many pothole detection systems based on video cameras have been studied, which can be implemented at low costs. In this paper, we propose a new pothole detection algorithm based on saliency map information in order to improve our previously developed algorithm. Our previous algorithm shows wrong detection with complicated situations such as the potholes overlapping with shades and similar surface textures with normal road surfaces. To address the problems, the proposed algorithm extracts more accurate pothole regions using the saliency map information, which consists of candidate extraction and decision. The experimental results show that the proposed algorithm shows better performance than our previous algorithm.
태양광 융합형 저풍속 고효율 수직형 풍력발전시스템 개발
조영태,김재용 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.0
국내의 풍력발전 산업은 대부분 대형 풍력발전장치 위주로 발전해 왔다. 하지만 도심에 설치 가능한 소형 풍력 장치의 개발과 동시에 국내에 적용된 대부분의 풍력발전 장치는 수평축으로서 기술개발에 있어 소음을 줄이는 것이 가장 관건이다. 수직축은 소음 발생이 적어 기술개발 및 실험과 사업화에 있어 큰 이점이 있다. 이를 활용 하여 저소음 고효율의 수직축형 풍력발전기를 개발하여 국내 수직축 풍력발전 시장 개척의 시발점이 될 수 있으며, 기존의 풍력발전 장치로는 발전효율이 떨어지는 풍속에서도 집풍장치를 활용하여 발전 불가능한 풍력발전자원을 활용 가능한 풍력 자원으로 확보 할 수 있다. 또한 풍력발전이 가능한 풍력 자원을 가속시켜 더욱 높은 발전량을 얻어 낼 수 있다. 태양광PV 판넬 발전 Voltage는 DC이며, String Inverter를 사용하므로, PV판넬 한 장이 고장이 나거나, 판넬위에 그늘이 지거나, 눈이나 황사가 덮히면 한 String Inverter에 연결된 모든 판넬에 영향을 준다. 이러한 문제를 해결할 수 있는 Micro-inverter(DC--->AC)를 각 판넬에 부착하면 문제가 발생한 판넬에 국한해서 효율이 떨어지며, 다른 판넬에는 영향을 주지않는다.
Numerical Analysis of Plasma in CO2 Laser and Arc Hybrid Welding
조영태,나석주 한국정밀공학회 2015 International Journal of Precision Engineering and Vol.16 No.4
Lasers and electric arcs are well known heat sources for the welding of a metal. For the sake of a synergic effect, the two sourcescan be combined and used at the same time. When the two sources are used simultaneously for material processing, complexphenomena are observed, such as the absorption of the laser in arc plasma and a concentration of plasma caused by the metal vaporgenerated by laser irradiation. In this paper, temperature distributions of plasma for a CO2 laser and arc hybrid welding arecalculated and investigated by use of a numerical analysis. Two types of shielding gases are considered. For argon plasma, the CO2laser is dramatically absorbed; however, for helium gas, there is little absorption of the laser light in the plasma. Therefore, improperwelding results can be expected in the case of a CO2 laser and an argon arc. From the analysis, it was shown that the maximumtemperature for a CO2 laser and argon arc hybrid plasma is about 30,000 K. It was also noticed that hybrid plasma was concentratedon the position of laser irradiation for helium-shielding gas.