Effect of post annealing on the microstructure, mechanical properties, and failure of Mo_xW_1-xSi₂ heaters produced by self-propagating high-temperature synthesis

Cho, Myung-Yeon,Lee, Sung-Chul,Park, Chulhwan,Lee, Daeseok,Koo, Sang-Mo,Moon, Kyoung-Sook,Lee, Dong-Won,Oh, Jong-Min Elsevier 2019 INTERMETALLICS Vol.110 No.-

<P><B>Abstract</B></P> <P>High-performance tungsten molybdenum disilicide (Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB>) heating elements were prepared using a self-propagating high temperature synthesis process. The effect of post annealing on the degradation behavior of the alloy was experimentally investigated. Increasing the attrition milling time up to 20 min during powder preparation resulted in Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters with the highest density, which increased the fracture strength compared to samples with shorter attrition times. Such samples were annealed and evaluated as heating elements using accelerated degradation tests and failure analysis in order to compare their structural characteristics and flexural strength with as-fabricated samples. The annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heater showed a relatively dense structure with few pores and no secondary phases, apart from a SiO<SUB>2</SUB> layer. This favorable structure prevented bubble formation, which can result in fracturing of the heater, as revealed by evaluation at high temperatures with various heating rates. The flexural strength of the annealed specimen was 2.5-times higher than that of the as-fabricated specimen, which was attributed to removal of secondary phases during annealing. Failure time and surface load analyses were used to investigate the fracture mechanism of the Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters in detail at 1790 °C by quantifying bubble formation and the presence of secondary phases.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Self-propagating high temperature synthesis of Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters demonstrated. </LI> <LI> Post-annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters were highly dense, with good flexural strength. </LI> <LI> Bubble formation (the main cause of fracture) suppressed at ultra-high temperature (above 1700 °C). </LI> <LI> Surface load, failure time, and bubble formation used to study fracture mechanisms. </LI> </UL> </P>

해남 모이산 천열수 금은광상의 지구화학적 특성

문동혁,고상모,이길재,Moon, Dong-Hyeok,Koh, Sang-Mo,Lee, Gill-Jae 대한자원환경지질학회 2010 자원환경지질 Vol.43 No.5

전남 해남군 모이산 금광상에서 지구화학적 특성에 대한 연구를 수행하기 위하여 모이산 지표 및 갱내, 대산 지표에서 채취한 총 140개 시료에 대한 지구화학분석결과를 상관분석, 요인분석 그리고 군집분석 등 다변수 통계처리 하였다. 상관분석 결과, 금의 함량이 100 ppb 미만인 비광화대와 100 ppb 이상인 광화대에서 동시에 금과 높은 상관관계를 가지는 원소는 Ag, Cu, Bi, Te 등이며, 이는 연구지역에서 수반되는 함금 은 광석광물들(엘렉트럼, 실바나이트, 칼라버라이트 및 스퉤자이트)과 기타광석광물들(황동석, 텔룰로비스무타이트 및 비스무시나이트)의 산출과 일치된 결과로 인지된다. Mo은 비광화대(0.269)에서 보다 광화대(0.615)에서 상대적으로 높은 상관계수를 가지므로 금광화작용에 의해 그 함량이 강하게 지배되고 있는 것으로 해석된다. Mn, Cs, Fe, Se 등은 비광화대에서는 금과 정의 상관관계를 가지지만 광화대에서는 음의 상관관계를 가지므로 금광화작용 시 모암으로부터 용탈되는 원소군으로 해석된다. Sb은 광화대에서 금과 높은 상관성을 보이지만 비광화대에서는 음의 상관관계를 가지므로 금광화작용 시 부화되는 원소로 지시될 수 있다. 요인분석결과, 비광화대에서 금의 함량에 영향을 받는 요인군에 속하는 원소는 Se, Ag, Cs, Te 등이며 이들은 연구지역 내 비광화대에서 금의 존재 여부를 알려줄 수 있는 원소로 해석될 수 있다. 반면 광화대에서는 Mo과 Te 등이 강하게 금광화작용의 여부를 지시해 주며, 금과 함께 수반되는 은광화작용의 여부를 지시해 줄 수 있는 원소는 Sb과 Cu 등으로 해석된다. 군집분석 결과 비광화대에서 Cd-Zn-Pb-S, Bi-Fe-Cu-Mn, Se-Te-Au-Cs-Ag, As-Sb-Ba 등이 유사한 거동을 보이는 원소군으로 나타나는 반면, 광화대에서는 Cd-Zn-Mn-Pb, Fe-S-Se, As-Bi-Cs, Ag-Sb-Cu, Au-Te-Mo 등이 유사한 거동을 보여주는 원소군으로 나타난다. 이상과 같은 지구화학분석 자료의 다변수 통계처리를 이용하여 금광화대와 비광화대의 산출광물의 거동 및 지구화학적 특성 차이의 비교가 가능하므로 추후 이러한 방법이 이와 유사한 유형의 광상탐사에 유용한 방법으로 적용될 수 있을 것으로 기대된다. Geochemical characteristics of the Moisan epithermal gold-silver deposit with total 140 samples in Haenam area, Jeollanamdo were studied by using multivariate statistical analysis (correlation analysis, factor analysis and cluster analysis). The correlation analysis reveals that Ag, Cu, Bi, Te are highly correlated with Au in the both non-mineralized and mineralized zone. It is resulted from the presence of Au-Ag bearing minerals (electrum, sylvanite, calaverite and stuezite) and non Au-Ag containing minerals (chalcopyrite, tellurobismuthite and bismuthinite). Mo shows relatively much higher correlation at the mineralized zone (0.615) than non-mineralized zone (0.269) which implies Mo content is strongly affected by Au-mineralization. While Mn, Cs, Fe, Se correlated with Au at the nonmineralized zone, they have negative correlation at the mineralized zone. Therefore, they seem to be eluviated elements from the host rock during gold mineralization. Sb is enriched during the gold mineralization showing high correlation at the mineralized zone and negative correlation at the non-mineralized zone. According to the factor analysis, Se, Ag, Cs, Te are the indicators of gold mineralization presence due to the strong affection of gold content in the non-mineralized zone. In the mineralized zone, on the other hand, Mo, Te and Sb, Cu are the indicators of gold and silver mineralization, respectively. While the cluster analysis reveals that Cd-Zn-Pb-S, Bi-Fe-Cu-Mn, Se-Te-Au-Cs-Ag, As-Sb-Ba are the similar behavior elements groups in the non-mineralized zone, Cd-Zn-Mn-Pb, Fe-S-Se, As-Bi-Cs, Ag-Sb-Cu, Au-Te-Mo are the similar behavior elements groups in the mineralized zone. Using multivariate statistical analysis as mentioned above makes it possible to compare the behavior of presented minerals and difference of geochemical characteristics between mineralized and non-mineralized zone. Therefore, it will be expected a useful tool on the similar type of mining exploration.

과도한 운동으로 발생한 횡문근융해증에 의한 급성신부전증 1예

문철호,류보열,모성환,김태종,기장도,박용관,김용환,정종훈 조선대학교 1995 The Medical Journal of Chosun University Vol.20 No.1

Rhabdomyolysis may be defined as a clinical and laboratory syndrome which releases muscle cell contents into the plasma, such as creatine phosphokinase, due to skeletal muscle injuries. It can be the result of many diverse causes including muscle disease, ischemia, genetic disorder, metabolic disorder, infectious disease, drugs, comatose state, trauma or vigorous exercise that can lead to acute renal failure as a complication. Since first reported in 1941, rhabdomyolysis-induced acute renal failure has been documented many times, and the major causes of this disease are carbon monoxide poisoning, snake bites, and etc in Korea Reports of acute renal failure after exercise-related rhabdomyolysis with myoglobinemia are rare. We report a case of acute renal failure caused by exercise-related rhabdomyolysis in a 20 year old man.

폐쇄성 수면무호흡 환자의 상기도 형태의 특징과 압력강하에 관한 3차원 전산유체역학해석

모성서,안형택,이정선,정유삼,문윤식,배응권,성상진 대한치과교정학회 2010 대한치과교정학회지 Vol.40 No.2

폐쇄성 수면무호흡(obstructive sleep apnea, OSA)은 수면 중에 반복적으로 상기도의 완전폐쇄나 부분폐쇄가 일어나는 질환으로서 흡기된 공기는 반드시 상기도라는 연조직 관(tube) 구조를 통과해야 하므로 상기도의 폐쇄경향은 관의 형태 및 관을 통과하는 공기의 유체역학적 특성에 따라서도 큰 영향을 받을 수 있다. 본 연구에서는 OSA 환자 3인의 치료 전 상기도 CT 이미지를 이용하여 개별화된 3차원 유한요소모델 A, B, C를 제작하고, 비공 당 170, 200, 230 ml/s의 흡기유량에 대하여 3차원 전산유체역학 해석을 시행하였다. 상기도의 유속, 음압 그리고 압력강하를 측정한 결과 관찰된 3개의 모델에서 모두 단면적이 가장 작은 부위에서 유속이 증가하였고, 음압이 크게 나타났다. 기도의 형태는 구개인두와 구인두 부위에서 좁아지는 형태를 가지며, 최소 단면적 영역과 하인두 단면적의 차이가 클수록 유속과 음압의 변화가 크게 나타났다. 비강 부위의 최고 압력과 최소 단면적 영역의 최저 압력의 차이를 의미하는 압력강하는 상기도 저항을 종합적으로 판단할 수 있는 유용한 지표이며, 유량에 따라 증가하였다. Objective: Obstructive sleep apnea (OSA) is a common disorder which is characterized by a recurrence of entire or partial collapse of the pharyngeal airway during sleep. A given tidal volume must traverse the soft tissue tube structure of the upper airway, so the tendency for airway obstruction is influenced by the geometries of the duct and characteristics of the airflow in respect to fluid dynamics. Methods: Individualized 3D FEA models were reconstructed from pretreatment computerized tomogram images of three patients with obstructive sleep apnea. 3D computational fluid dynamics analysis was used to observe the effect of airway geometry on the flow velocity, negative pressure and pressure drop in the upper airway at an inspiration flow rate of 170, 200, and 230 ml/s per nostril. Results: In all 3 models, large airflow velocity and negative pressure were observed around the section of minimum area (SMA), the region which narrows around the velopharynx and oropharynx. The bigger the Out-A (outlet area)/ SMA-A (SMA area) ratio, the greater was the change in airflow velocity and negative pressure. Conclusions: Pressure drop meaning the difference between highest pressure at nostril and lowest pressure at SMA, is a good indicator for upper airway resistance which increased more as the airflow volume was increased.

토지정보시스템에서 수치지도의 활용에 관한 연구

문형모,이성호 釜山大學校 都市問題硏究所 2003 都市硏究報 Vol.14 No.-

Geography Information System is devided to many details fields Urban Information System, Mlitary Information System etc. Theses detailed fields are connected each other an National Geography Information System. Now Geography Information System is being used in many fields with Urban Information System information of all field is being constructed to network. The purpose of this study is to use digital map for Land Information System. These applicable digital maps have a merit to anlize the regionality when one selected a data structure appropriate to a features of an objective region. GIS software which solve these problems of data structure being developed. The suitability of land use that are devided into urban areas(residential, commercial and industrial) and green areas was analyzed using overlay method by constructed database using digital map. The method and process for grafting digital map on Land Information System were examined and related environmental factors and relative importance among them were investigated on the base of preceding researches.

Chinchilla 달팽이핵에서 calbindin D-28ka 양성세포에 관한 면역조직화학적 연구

장인엽,윤상필,정윤영,정종중,문정석,허영,모근석,김흥중 대한해부학회 1997 Anatomy & Cell Biology Vol.30 No.5

객체에 근거한 선호도 제약 중심 스케줄링 언어와 성능향상 기법

이기철,문정모,송성헌 한국경영과학회 1995 經營 科學 Vol.12 No.2

For a complex scheduling system like time table construction, its optimal solution, if exists, is hard to obtain. In this paper, the scheduling environment is reasonably confined as where objects have their own events competing for better slots on boards, and objects have their own board slot preferences and belong to one or more classes of the society which globally constrains them. Here, two phase method is suggested, where the first phase is human-like preference dirven and the second phase is for fine tuning by considering all the factors given. Designed and implemented in our system HI-SCHED are dynamic object switching, temporal-constraint-driven intelligent backtracking, case-based revisions, object-based approach, and so on. Some satisfaction degrees are also defined to measure the usefulness of our method. In addition, look-ahead dynamic object switching is considered, and additional global constraints are introduced and processed. A simple scheme is also used to verify the usefulness of the post processing scheme.

다발성 골수종으로 이행한 단일형질세포종 1예

정재용,모성환,기장도,문철호,김창욱,전용준,박유환,정춘해,오윤경 조선의대 1995 The Medical Journal of Chosun University Vol.20 No.2

von Willebrand's disease 1예

박치영,모성환,문철호,곽재정,김태종,전용준,박유환,정춘해 朝鮮大學校 附設 醫學硏究所 1995 The Medical Journal of Chosun University Vol.20 No.2

von Willebrand's disease (vWD) is the most common autosomal-dominant inherited disorder resulting from a quantitative or a qualitative defect of von Willebrand factor (vWF). The most diagnostic pattern is the combination of a prolonged bleeding time, a reduction in plasma vWF concentration, a parallel reduction in ristocetin cofactor activity, and reduced factor Ⅷ activity, In this case, ristocetin-induced platelet aggregation data were compatible with that of vWD. Bleeding times were prolonged over 4 minutes, vWF antigen levels were 45%. vWF ristocetin cofactor activities were 0~1% and factor Ⅷ levels were 31%, when compared to the normal control. We report the case of a family with vWD. characterized by a quantitative defect in vWF

von Willebrand's diseasee 1예

박치영,모성환,문철호,곽재정,김태종,전용준,박유환,정춘해 조선의대 1995 The Medical Journal of Chosun University Vol.20 No.2