지리산국립공원 심원계곡 생태경관 복원공사지역 식생 변화

정태준 ( Tae-jun Jung ),김연경 ( Yeon-Gyeong Kim ),김영진 ( Young-jin Kim ),정명희 ( Myung-hee Jung ),박경희 ( Kyoung-hee Park ),신창근 ( Chang-keun Shin ),박선홍 ( Seung-hong Park ),김영선 ( Young-sun Kim ) 한국환경생태학회 2021 한국환경생태학회지 Vol.35 No.3

본 연구는 지리산국립공원 심원계곡 생태경관 복원공사지역의 모니터링 결과를 분석하여 체계적인 복원관리를 도모할 수 있는 기초자료를 확보하는데 그 목적이 있다. 복원사업이 완료된 2017년도에 식생 모니터링을 위한 조사구 12개소와 대조구 4개소를 설치하였고, 2017년과 2020년의 상대우점치, 종다양도지수, 유사도 등의 변화를 분석하였다. 복원사업 시 수목이 식재되었던 조사구는 종다양도지수가 0∼1.4552로 나타났고, 대조구와의 유사도지수에서는 1개 조사구가 1.32%로 분석된 것을 제외하고 모두 0%로 나타났다. 조사구의 종다양도지수 및 유사도지수가 매우 낮은 것은 복원사업 시 식재된 수목이 고사하거나 멧돼지 피해, 유수에 의한 침식으로 유실되는 등의 영향으로 판단되었다. 반면 복원사업 시 수목이 식재되지 않은 미식재 조사구는 종다양도지수가 0.9538∼2.3222로 나타났고, 유사도지수는 최대 8.33%까지 분석되었다. 국립공원 생태경관 복원공사지역의 복원 공법 개발을 위한 장기 모니터링과, 미식재 조사구의 천이과정을 분석하는 지속적인 연구가 필요하다. This study aims to obtain basic data for systematic restoration by analyzing the monitoring results of the Shimwon Valley Ecological Landscape Restoration Project area in Jirisan National Park. In 2017, when the restoration project was completed, 12 monitoring plots and 4 control plots were installed for vegetation monitoring, and changes in the relative dominance, species diversity index and similarity between 2017 and 2020 were analyzed. The species diversity index of the surveyed areas where trees were planted during the restoration project was 0-1.4552, and the similarity index with the control group was 0% except for one survey area at 1.32%. The very low species diversity index and similarity index in the survey areas were attributed to the loss of trees planted during the restoration project due to death, damage by wild boars, or erosion by running water. On the other hand, the species diversity index was 0.9538-2.3222 in the monitoring plot where no tree was planted, and the similarity index was analyzed to be as high as 8.33%. It is necessary to continue the long-term monitoring for the development of ecological landscape restoration methods in the national park and analysis of the succession in monitoring plots where no trees were planted.

전기저항식 로드셀을 이용한 균등긴장시스템 개발 및 성능실험

박원태(Park Weon-Tae),천경식(Chun, Kyoung-Sik) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.2

MS(Multi-Strand) 케이블은 여러 개의 강연선으로 이루어져있어, 케이블 시공시 각 강연선을 차례대로 개별적으로 긴장한다. 그리고 마지막 강연선이 정착되었을 때, 모든 강연선에 동일한 장력이 도입되어야하며, 이것이 MS 균등긴장의 핵심기술이다. 본 연구에서는 엑스트라도즈(Extradosed)교 및 사장교의 사재케이블(Stay Cable)에 적용되는 2,200MPa 초고강 도 강연선들을 균등하게 긴장, 제어할 수 있는 MS 케이블 균등긴장시스템을 개발하였다. 개발한 균등긴장시스템은 전기저항 식 로드셀, 유압잭, 유압펌프 그리고 통합제어기로 구성되며, Master 강연선과 Slave 강연선의 장력변화를 실시간으로 예측하 며 제어하는 알고리즘을 탑재하였다. 개발시스템의 기능과 성능을 검증하기 위해 균등긴장 실험을 수행한 후, 광양 태인2교 (ED교)의 사재케이블 가설긴장에 성공적으로 적용하였다. Because MS(Multi-Strand) cables consist of many strands, a jacking force is applied to each strand one by one for cable construction. All strands should have an equal tensile force when the last one is wedged. This is the core technology for MS iso-tensioning. In this study, a new MS cable iso-tensioning system was developed for controlling and jacking the high-strength strands, with an ultimate tensile strength of 2,200MPa, for a stay cable of extra-dosed/cable-stayed bridges. The newly developed iso-tensioning system consists of electrical resistance load cells, hydraulic jacking devices, hydraulic pumps, and integrated controllers. Moreover, it is embedded with an algorithm that can control and predict the variations in tensile forces of the Master and Slave strands in real time. Actual experiments were carried out to verify the function and performance of the newly developed system. This system was applied successfully to the stay cable construction of 2nd Tae-in extra-dosed bridge in Gwangyang.

Elevational Distribution of Breeding Bird Communities in Seoraksan National Park, Korea

( Hyun-su Hwang ),( Jae-kang Lee ),( Tae-kyung Eom ),( Ho-kyoung Bae ),( Dong-ho Lee ),( Jong-hwan Lim ),( Sung-cheol Jung ),( Chan-ryul Park ),( Shin-jae Rhim ) 한국산림과학회(구 한국임학회) 2020 한국산림과학회지 Vol.109 No.1

In this study, the elevational distribution of breeding birds in Seoraksan National Park, Korea was investigated. Forty-six species of birds were documented from line transect surveys taken from Seorakdong at 230 m above sea level (a.s.l.) to the Daechungbong summit at 1708 m asl. Birdspecies richness and diversity were highest in Seorakdong and lowest at the Daechungbong summit. As elevation increased, bird species richness and diversity decreased, with a humped-shape trend being observed between 700 m and 1200 m a.s.l. Stepwise analyses revealed that breeding bird species diversity indices were significantly negatively correlated with elevation (r² = 0.327, P < 0.001) and positively correlated with vegetational coverage (r² = 0.324, P = 0.046). Higher elevations supported fewer birds than low and intermediate elevations. Projections at the local scale, including data on behavior and habitat use by birds, will be necessary for optimal conservation and management of the bird communities in Seoraksan National Park.

Elevational Distribution of Breeding Bird Communities in Seoraksan National Park, Korea

Hwang, Hyun-Su,Lee, Jae-Kang,Eom, Tae-Kyung,Bae, Ho-Kyoung,Lee, Dong-Ho,Lim, Jong-Hwan,Jung, Sung-Cheol,Park, Chan-Ryul,Rhim, Shin-Jae Korean Society of Forest Science 2020 한국산림과학회지 Vol.109 No.1

In this study, the elevational distribution of breeding birds in Seoraksan National Park, Korea was investigated. Forty-six species of birds were documented from line transect surveys taken from Seorakdong at 230 m above sea level (a.s.l.) to the Daechungbong summit at 1708 m asl. Birdspecies richness and diversity were highest in Seorakdong and lowest at the Daechungbong summit. As elevation increased, bird species richness and diversity decreased, with a humped-shape trend being observed between 700 m and 1200 m a.s.l. Stepwise analyses revealed that breeding bird species diversity indices were significantly negatively correlated with elevation (r² = 0.327, P < 0.001) and positively correlated with vegetational coverage (r² = 0.324, P = 0.046). Higher elevations supported fewer birds than low and intermediate elevations. Projections at the local scale, including data on behavior and habitat use by birds, will be necessary for optimal conservation and management of the bird communities in Seoraksan National Park.

발열로 인해 발현된 부루가다 증후군 1례

박혜연,김종훈,박경일,황철웅,김태년,남궁준,도준형,이원로,이성윤 白中央醫療院 2005 仁濟醫學 Vol.26 No.1

Brugada syndrome is characterized by right bundle branch block morphology and ST segment elevation in the right precordial leads and a propensity to develop ventricular arrhythmias. Mutations in a cardiac sodium channel gene have been linked to this syndrome, and the ionic mechanisms responsible for the electrocardiographic phenotype are temperature-dependent. This case report describes a patient in whom a typical Brugada ECG pattern developed during fever and returned normal ECG after fever was subsided.

마이크로파에 의한 Li₂O-2SiO₂글라스의 핵생성 및 결정 성장 거동

박희찬,박성수,김경태,김진남 釜山大學校生産技術硏究所 1998 生産技術硏究所論文集 Vol.55 No.-

Li₂O-SiO₂계 글라스를 재래식 열원과 마이크로파 열원으로 가열했을 때, 핵생성 및 결정화 거동을 비교 조사하였다. 전자주사현미경 분석, X선 회절 분석 및 시차열분석을 통하여 결과를 분석하였다. 재래식 열원과 마이크로파 열원으로 가열된 시편들의 핵생성 및 결정화 거동이 매우 상이하였다. 마이크로파가 시편내의 핵 생성을 억제시켰지만, 결정 성장은 축진시켰다고 추측된다. A comparison of nucleation and crystallization of Li₂O-SiO₂glass system under between the conventional and microwave heating was investigated. Scanning electron microscopy, X-ray diffractometry, and differential thermal analysis were used to evaluate the results. Nucleation and crystallization behaviors under the microwave heating appeared largely different from under the conventional heating. It was assumed that microwaves inhibitied nucleation, but accelerted crystal growth.

산업폐기물인 폐주물사를 혼입한 콘크리트의 최적배합설계

박재선,김태경,백민경,이주형,윤경구,김남윤 강원대학교 석재복합신소재제품연구센터 1997 석재연 논문집 Vol.2 No.-

산업폐기물인 폐주물사를 재활용하여 에너지 절감과 환경오염효과를 얻을 수 있다. 반요인실험법을 사용하여 폐주물사를 잔골재에 일정비율 치환한 콘크리트의 최적배합설계 제시를 위한 예비실험에서 물-시멘트비, 폐주물사의 잔골재 치환율, 잔골재율, 슬럼프와 같은 주요변수와 변수사이의 2차상호작용을 파악하였다. 예비실험결과 폐주물사의 잔골재치환율을 70%까지 실시하였을 때 폐주물사를 혼입한 콘크리트의 강도발현에 가장 중요한 변수는 물-시멘트비로 분석되었고 폐주물사의 잔골재치환율은 거의 영향이 없는 것으로 분석되어 폐주물사를 콘크리트의 잔골재로 대체할 수 있음을 알 수 있었다. 각 변수의 2차상호작용에서는 폐주물사의 잔골재 치환율과 잔골재율의 상관관계가 콘크리트의 강도발현에 가장 큰 영향을 미치는 것으로 나타났다. 목표압축강도에 대한 최적배합조건을 폐주물사의 잔골재 치환율에 따라 물-시멘트비, 잔골재율에 대해 제시하였다. The waste foundry sand might be recycled in concrete, saving energy and protect-ing environment. An half- factorial experiments were performed with the primarary variable such as water- cement raito, waste foundry sand substitution ratio, fine agg-regate ratio and slump as a preliminary study for optimum mix design of concrete. The preliminary study show that the water- cement ratio is the most important factor to the concrete strength, followed by slump. The substitute of waste foundry sand up to 70% has little infulence, indicating that it can substitute the fine aggregate without damaging the Concrete strength. The interaction between waste foundry sand substitution ratio and fine aggregate ratio was most significant to the concrete strength among the 2-way interaction variable. Only compressive strength affect to the formation of optimum mix design area as target compressive strengh becomes bigger. Optimum mix designs of concrete incorporating waste foundry sand, satisfying the target responses, were proposed in terms of waste foundry sand substitution ratio, water cement ratio and fine aggregate ratio.

900 MHz 휴대폰에 의한 안구가 포함된 3층 구조 인체 두부 모델의 10 g 평균 국부 SAR 계산

박경태,양승인 崇實大學校 生産技術硏究所 1998 論文集 Vol.28 No.-

The elecric near-fields from a celluar phones antenna are calculated using TLM method. The cellular phone is assumed to be a conductive box covered with dielectric insulator(??=2) of 1 mm thickness and the frequency is set to be 900 [MHz]. The near-fields and SAR are consiered for 1/2 avelength wire antenna. The peak SAR and 10 [g] localized SAR are calculated as 2 [W/kg] and 0.85 [W/kg], respectively, for an inhomegeneous(skin, bone, brain, eyeballs) head medel.

에어-오일 윤활에 의한 공작기계 주축계의 고속화연구

朴京鎬,崔大奉,金洙泰 國立 昌原大學校 産業技術硏究所 1992 産技硏論文集 Vol.6 No.-

According to the development of cutting tools, the high speed of machine tool's spindle is needed, and the demands for the precision machining, the improvement of light materials' productivity and etc. are increased. The spindle of machine tool with the maximum speed, ??·N, has lately been used and that over ??·N has been studied in advanced countries. In the country, the study on this field is needed because the spindle with the speed,??·N, is used up to now. Therefore, the study is carried out for the high speed spindle design, the lubrication system and the development of spindle unit.

前腕部 經穴 取穴에서 骨度分寸法과 一夫法의 比較 硏究

박히준,채윤병,차웅석,박종배,이혜정,이향숙,인창식,고형균,김수영,최일환,김강식,문정배,배기태,유경환,육근영,정병주,손인철,임사비나 WHO COLLABORATING CENTRE FOR TRADITIONAL MEDICINE 2004 東西醫學硏究所 論文集 Vol.2004 No.-

Background : The cun measurement System, an essential and convenient method in locating acupoints, has been widely used in the practice of acupuncture. However, traditional cun measurement has been criticized for its lack of reliability. Objectives : The purposes of this study are to determine if one cun measured by the directional methods have a consistency with that of proportional methods and to investigate which factors are related with these differences, especially in forearm. Methods : The distance between the elbow crease and the wrist crease of forearm was compared to a reference value of one cun obtained by the directional method. In this method, one cun is one third of the distance between index finger and Small finger of a subject, measured at proximal interphalangeal joint. In addition, to investigate the factors influencing the differences between these two methods, we measured the height and body weight and calculated body mass index (BMI). Finally we analyzed the factors correlated with these lengths by linear regression test. Results : The results showed that one cun obtained by the directional methods were significantly different from one cun by the proportional methods in forearm. It was demonstrated that the length acquired with the directional method was more correlated with body weight and body mass index, while the length obtained by the proportional method was more correlated with the height.