임신 종결 후 발생한 자궁 동정맥 누공에서 자궁동맥색전술로 치료한 1예

김종민,이해혁,김태희,남계현,심일구,이권해,김형문,이임순,장종호 순천향의학연구소 2004 Journal of Soonchunhyang Medical Science Vol.10 No.2

Arteriovenous fistula of uterus is rarely reported disease. This vascular malformation is very dangerous condition because Dilatation & curettage can cause massive uterine bleeding without accurate diagnosis. The diagnosis is made by angiography, gray scale ultrasonography, color and duplex doppler ultrasonography, computed tomography, and magnetic resonance imaging is helpful. Especially color and duplex doppler ultrasonography is allows convincing detection and diagnosis of arteriovenous fistula. Recently transcatheter uterine artery embolization is treatment of choice. We have experienced a case of arteriovenous fistula of uterus. Which is presented with a brief review of literature.

Snorer의 앙와위와 직립위에서의 상도의 크기

이계형,김종철 전남대학교 치과대학 1995 전남치대논문집 Vol.7 No.1

The purpose of this study was to compare and evaluate the upper airway structure between the snorers and asymptomatic control subjects depending on the positional change. Lateral cephalograms in the upright and supine position were taken in 25 female snorers and 20 female asymptomatic control subjects. The length and the area of the soft palate, tongue and airway were measured and evaluated statistically. The results obtained were as follows : 1. The snorers showed longer and higher tongue, narrower and longer airway, inferiorly positioned hyoid bone, longer and broader soft palate and narrower hypopharynx than the control subjects both in the upright and supine position. In addition, the snorers showed broader tongue area and narrower oropharynx area than the control subjects in supine position. 2. Depending on the positional change from upright to supine position, the controls and the snorers showed decreased airway length and superior positioned the hyoid bone. In addition, the snorers showed decreased tongue length and height, airway length and thickness and oropharynx area, but increased tongue area and soft palate area.

CAD/CAM 시스템을 활용한 세라믹 공구 금형제작

이종선,김형철 한국공작기계학회 2002 한국공작기계학회 춘계학술대회논문집 Vol.2002 No.-

The object of this study is a manufacture of buff die using CAD/CAM systems. Systems are consist of AutoCAD, CAM software and CNC milling machine. CAM software is purpose of G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

정신분열병 환자에서 얼굴 영상의 작동기억 장애 : 기능자기공명영상연구

이창욱,김태석,주라형,박주미,박여진,김종진,전신수,배치운,김정진,이수정,이철,백인호 大韓神經精神醫學會 2005 신경정신의학 Vol.44 No.2

Objectives : Impaired processing of facial information is one of the broad ranges of cognitive deficits seen in patients with Schi-zophrenia. We aimed to elucidate the differences in brain activities involved in the process of facial working memory between schizophrenic patients and healthy comparison subjects. Methods : Twelve patients with schizophrenia were recruited along with twelve demographically matched healthy volunteers as a comparison group. Functional magnetic resonance imaging (fMRI) was used to assess cortical activities during the Perfor-mance of a 2-back working memory paradigm using images of neutral faces as mnemonic content. Rcsults : The patient group performed the tasks with reduced accuracy. Group analysis revealed that the left fusiform gyrus, the right superior frontal gyrus, the bilateral middle frontal gyri/insula, the left middle temporal gyrus, the precuneus, the quadrangular lobules and the vermis of cerebellum showed decreased cortical activities in the patient group. On the other hand, an increased level of activation in the lateral prefrontal cortex and the pahetal lobule was observed from the patient group, all in the right hemisphere. Conulusion : A decreased level of activity in the left fusiform gyrus among the patient group implicates inefficient processing of facial information. An increased level of activation in prefrontal and parietal neural networks from the patient group confirms earlier findings on the impaired working memory of patients with schizophrenia.

고압 분사노즐의 최적형상에 관한 연구

이종선,김형철 한국공작기계학회 2003 한국생산제조학회지 Vol.12 No.2

This study makes to flow analysis of computational fluid dynamics(CFD) according to the basic theory of turbulent flow regarding high-pressure injection nozzle. It also makes structural analysis to find out the structural validity of the optimum shape of high-pressure injection nozzle. It divides to two areas such as plunger area and high-pressure injection nozzle area including plunger.

구호흡을 동반한 증식성 치은염 환자의 치료증례

이종갑,이남형,손흥규,김형태 大韓小兒齒科學會 1993 大韓小兒齒科學會誌 Vol.20 No.2

Mouth breathing gives direct irritation to gingival tissue and increases gingivitis by increasing debris deposite. Generally, it is reported that gingivitis increases at puberty and it is mainly caused by microbial change and hormonal imbalance. This study included generalized gingivitis accompanying mouth breathing and localized gingival hypertrophy. This 11 years old female patient had no past medical history but she had menarchy a year ago. As a treatment, primarily eliminated the cause of mouth breathing and conducted tooth brushing instruction, scaling, and gingivectomy which resulted good.

매복 상악 견치의 맹출 유도에 관한 증례 보고

이종갑,권태희,손홍규,김형태 大韓小兒齒科學會 1993 大韓小兒齒科學會誌 Vol.20 No.2

Upper cuspid impation is a serious that occurs with sufficient frequency to justify diagnosis and intervention as early as a dental age of 8 years. The maxillary cuspid follows a more difficult and tortuous path of eruption than other tooth. Where upper arch crowding prevents such a tooth from following its normal eruption path, it will diverted either buccally or palatally. The diagnosis of canine impaction is on both clinical and radiographic examinations. When clinician detects early signs of ectopic eruption of canines, an attempt should be made to prevent theier impaction and its potential sequelae. Screening consists of identifying patients who lack a normal cuspid bulge on palpation, with follow-up radiographic evaluation where indicated. Selective removal of deciduous cuspids is a suggested interceptive measure in class Ⅰ uncrowded malocclusions. Each patient with an impacted canine must undergo a comprehensive evaluation of the malocclusion. The clinician should then consider the various treatment options available for the patient. Surgical exposure of the canine and orthodontic treatment to bring the tooth into the line of occlusion is the most desirable approach. After the surgical exposure of the impacted tooth, an auxiliary(button) is attached to the crown. It should be reemphasized that in the surgical exposure of an impacted tooth, only enough bone should be removed to allow for the placement of a bracket and that during the procedure the CEJ should not be intentionally exposed. The removable appliance was designed This applied traction along a desired path of eruption using elastics changed daily Removable appliance seemed to offer more in vertical anchorage than did the fixed appliances. 13 year-old male and 14 year-old female with impacted maxillary canine were treated with surgical exposure and direct traction.

연 폭로가 남성호르몬에 미치는 영향

김형수,장성훈,이원진,최재욱,박종태,백남원,김록호 大韓産業醫學會 2001 대한직업환경의학회지 Vol.13 No.1

목 적 : 본 연구는 직업성 연 폭로근로자에서 연폭로가 남성 생식기계 독성중 성호르몬에 미치는 영향과 그 정도를 평가하고자 시도되었다.방 법 1998년 하반기에 실시한 일반, 특수건강진단자중 경기도 지역 직업성 연 폭로 근로자 33명과 과거 직업력에서 연 폭로가 없었던 사무직 근로자 33명을 연구대상으로 선정하였다. 연의 생물학적지표로는 혈색소, ZPP, 혈중 연, 및 요중 연을 이용하였으며, 성호르몬으로는 LH, FSH, testos-terone, SHBG 및 FTI를 이용하였다. 연 폭로 지표와 성호르몬과의 상관관계를 조사하였다. 결 과 : 연의 생물학적 지표중 혈색소는 폭로군에서 대조군보다 유의하게 낮았으며, ZPP, 혈중 연및 요중 연등은 폭로군에서 대조군보다 유의하게 높았다. 성호르몬에서 FSH, testosterone, SHBG및 FTI는 모두 폭로군에서 대조군보다 낮았으나 통계적 유의성은 없었다. 폭로군의 성호르몬중에서 연령은 FSH 및 FTI, ZPP는 FSH, 혈중 연은testosterone과 유의한 상관관계가 있었다. 대조군에서 연령은 FSH, testosterone, SHBG 및 FTI와 흡연량은 FSH와 유의한 상관관계가 있었다. 연령군별 폭로군과 대조군의 성호르몬 비교에서 30-39세군의 FTI에서 폭로군이 대조군보다 유의하게 낮았으며 그 밖의 호르몬에서는 모두 유의한 차이가 없었다. 결 론 : 연 폭로군의 FSH, Testosterone, SHBG 및 FTI가 대조군에 비교하여 낮았으나 통계적 유의성은 없었다. 그러나 폭로군에서 연의 생물학적 지표와 일부 성호르몬간에 유의한 상관관계를보였으며 이는 본 연구 대상 근로자의 연 폭로 수준이 일부 성호르몬에 영향이 있음을 보여주는 것으로 판단된다. 향후 이에 대한 지속적인 연구가 진행되어 야 할 것이다. Objectives : This study was performed to evaluate the relationship between biological markers of lead exposure and level of sex. hormones in men occupationally exposed to lead. Methods : In this study, 33 male workers who employed at smelting and battery factories were compared with 33 male workers who were not exposed to lead. As biological markers of lead exposure, hemoglobin, ZPP, blood lead and urine lead were measured. As sex hormones, FSH, LH, testosterone, SHBG and FTI were determined. Results : Hemoglobin level was significantly lower in exposed than in nonexposed group. Level of ZPP, blood lead, and urine lead were significantly higher in exposed than in nonexposed group. There was a trend that level of FSH, testosterone, SHBG, and FTI was lower in exposed than in nonexposed group respectively, but there were no statistical significance. In exposed group, FSH level was correlated with age, ZPP, and blood lead; testosterone level was correlated with hemoglobin, blood lead, urine lead, and SHBG ; and FTI level was correlated with age. Conclusions : Level of some sex hormones were lower in exposed than in nonexposed group but there were no statistical significance between the exposed and the nonexposed group. But level of sex hormones were correlated with several biological markers of lead in exposed group. It suggests that occupational lead exposure might affect sex hormones.

진공증착중합법에 의해 제조된 PMDA / 4,4'-DDE 폴리이미드의 내열 특성

김형권,이은학,우호환,김종석,이덕출 (사단법인)韓國火災 ·消防學會 1996 한국화재소방학회논문지 Vol.10 No.3

The Polyimide thin films based on PMDA and 4,4'-DDE were fabricated by VDPM, and their heat resistance characteristics were invastigated by TGA(Thermogaravimetry Analyzer). It was found that deposition rate decreased with increasing substrate temperature and the thin films were not fabricated over the substrate temperature of 70℃. T_TG of 5% weight loss temperature is 565℃, 397℃ and 210℃ at the substrate temperature of 20℃, 40℃ and 70℃, respectively. It is realized that the endurace temperature for 20,000 hour of thin films fabricated at 20℃ and 40℃ is 230℃ and 200℃, respectively.

고강도 할로겐광으로 중합한 복합레진 수복재의 경도

박종석,이광희,김대업,김성형,안호영 대한소아치과학회 2001 大韓小兒齒科學會誌 Vol.28 No.3

복합레진의 광중합시간 단축과 관련하여 최근에 개발된 고강도 할로겐광 중합기를 기존의 중강도 할로겐광 중합기와 비교 평가하기 위하여. 세 종류의 광중합용 복합레진을 두께가 2, 3, 4, 5mm인 스테인레스 스틸 몰드에 충전하고, 레진 상면을 중강도 할로겐 광은 (1) 400mW/cm²으로 40초간, 고강도 할로겐광은 (2) 10초동안 100mW/cm²부터 1000mW/cm²까지 출력량이 증가하면서 중합하고 다음 10초동안 1000mW/cm²로 중합하는 ramp 모드로 20초간, (3) 1000mW/cm²의 boost 모드로 10초간. (4) 850mW/cm²의 표준 모드로 20초간 조사하고. 상면과 하면의 표면경도를 미세경도측정기로 측정한 후 실험군간의 차이를 분석하였다. 레진 상면의 경도는 중합광의 강도와 중합시간 및 레진 두께에 따른 차이가 없었다(유의수준 0.05, 이하 동일). 레진 하면의 경도는,두께 2mm의 중강도군(1)을 제외하고,상면의 경도보다 낮았다. 레진 하면의 경도는 두께 2mm에서 중강도군(1)이 ramp군(2) 및 boost군(3)보다 높았고 중강도군(1)과 표준군(4) 간 및 ramp군(2)과 boost 군(3)간에 차이가 없었으며 두께 3mm에서 중강도군(1)이 가장 높았고 표준군(4)이 boost군(3)보다높았다. 따라서, 복합 레진의 중합 깊이 측면에서 볼 때. 1000mW/cm²의 고강도 할로겐 광을 10초간 조사한 것은 400mW/cm²의 중강도 할로겐광을 40초간 조사한 것에 미치지 못하였으며, 레진 두께 2mm이내인 경우에는 850mw/cm²의 고강도 할로겐 광을 20초간 조사함으로써 400mw/cm²중강도 할로겐 광을 40초간 조사한 것과 대등한 중합을 일으킬 수 있었다. The purpose of this study was to compare the effect of the high intensity halogen light (850∼ 1000 mW/cm²) with that of the conventional halogen light (400 mW/cm²) on the hardness of composite resin. Three resin com-posites (Z-100, 3M, U.S.A ; Tetric Ceram, Vivadent, Liechtenstein : Surefil, Dentsply, U.S.A.) were filled in the stainless steel moulds which were 4mm in diameter and 2, 3, 4, and 5 mm in depth, respectively. They were cured under the four different modes : (1) conventional mode,40 seconds at 400 mW/cm²; (2)'ramp'mode, 10 seconds at 100 to 1000 mW/cm² plus 10 seconds at 1000 mW/cm²: (3)'boost'mode, 10 seconds at 1000 mW/cm²: and (4) 'standard'mode, 20 seconds at 850 mW/cm² The surface hardnesses of the top and the bot-tom of the resin samples Were measured with a microhardness tester (MXT70, Matsuzawa, Japan) . The top surface hardness was not significantly different among the curing modes . The bottom surface hardness was gen-erally the highest in the conventional mode and the lowest in the high intensity boost mode There was no sig-nificant difference in the bottom surface hardness between the conventional mode and the high intensity standard mode in 2mm depth. The results suggest that the curing time of the high intensity halogen light (850 mW/cm²) should be at least 20 seconds to produce the equal level of the bottom surface hardness of 2mm resin composite as compared to the hardness produced by the conventional halogen light (400 mW/cm²).