http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
7두의 개에서 배설성 요로조영술을 통한 신장 기능 평가
최윤정,이기자,최형준,이용진,박성준,송근호,정성목,최호정,이영원 忠南大學校 獸醫科大學 動物醫科學硏究所 2005 動物醫科學硏究誌 Vol.13 No.-
Excretory urography is a type of contrast study used to verify and localize upper urinary tract disease. It is an inexpensive and easy way to visualize of anatomic and functional status of the kidney and has been used as a primary imaging modality for the evaluation of urinary tract abnormalities. We describe urological signs of 7 dogs who examined with excretory urography and ultrasonography. Six cases were referred to veterinary medical teaching hospital. Chungnam national university (VMTH, CNU) to evaluate renal function after the treatment for renal failure and one case was referred showing hematuria. In case 1, 2 and 4, blood test and urinalysis was normal and the results of excretory urography presented that renal function were normal range. In case 3, the results of urinalysis, ultrasonography, and excretory urography except blood test presented abnormal kidney and hydronephrosis was diagnosed. In case 5 and 6, blood test, urinalysis, ultrasonography and excretory urography indicated renal failure. In case 7, blood test, urinalysis and ultrasonography presented partially abnormal signs, however, the results of excretory urography was normal range.
레이저 형광법에 의한 프로세싱 플라즈마중의 입자 계측에 관한 연구
최상태,이광식,하장호,전용우,박원주 嶺南大學校 工業技術硏究所 1998 工業技術硏究所論文集 Vol.26 No.2
Armorphous materials have various structures that is determined by different manufacturing conditions. That is, the photoelectric characteristics of films manufactured by different conditions are totally different. The growth mechanism of a-Si should be understood in order to controll the characteristics and structures of these kinds of materials. In this study, we try to elucidate the particle behaviours in a processing plasma using a low pressure glow discharge. And because of difficulties understanding discharge mechanism, we have done the processing so far depending on the experimental methods that compare the thin film produced by varing discharge parameter with the results of micromachinary. But, this has a limitation in the development because it regards the plasma as a blackbox. Therefore, because it needs to observe the discharge parameters and plasma background gas systematically, we try make sure that the particle behaviours be made clean by using laser fluorescence method which is predominant in a phenomina measurement and special resolution.
전홍구,최관순,공용해 순천향대학교 부설 산업기술연구소 1999 순천향 산업기술연구소논문집 Vol.5 No.2
GIS is evolving from a technology that addresses specific applications to a broad-based information system. Its value goes beyond increased efficiency, cost savings. Therefor GIS will be fundamental to the future on the internet. But our organizations and societies exclusively handle geographic informations in Korea. and they use independently foregin commercial GIS softwares. It makses difficult to accmulate local techniques in GIS. In order to solve this problem we implement WEB-GIS using JDBC without depening specific software.
전유신,최석천,이용훈,김세현,정효민,정한식 경상대학교 해양산업연구소 2002 해양산업연구소보 Vol.15 No.-
The main purpose of this research is the investigation of water distributer. The water distributer of this research is installed in evaporative cooling tower system. The performance of this cooling tower system depend on the evaporative surface, and there are many kinds of methods for increasing the evaporative surface. In this research, we introduced the two kinds of spraying system, one is the hole type with hole diameter 1, 2 and 3mm, and the other is the spray nozzle types with nozzle tip diameter of 1 and 2mm. As the experimental results, the case of diameter 2mm showed the best performance.
마이크로머시닝을 이용한 Bump형 Probe Card의 제조
최원익,김용대,심준환,이종현 경북대학교 센서기술연구소 1998 센서技術學術大會論文集 Vol.9 No.1
Probe card is the most important part of testing IC chips. This work was related to silicon vertical probe card which enabled to simultaneously test multiple semiconductor chips. We presented Bump-type vertical probe card. It was fabricated by dry etching using RIE technique, isotropic etching, and bulk-micromachining on SDB wafer. The process used in this work was very simple and reproducible, which had good controllability in the probe card dimension and spacing. It is expected that the fabricated probe card can reduce testing time, can promote productivity and enables bum-in test.
대기환경개선을 위한 비열플라즈마중의 NO 입자의 거동 연구
최상태,전용우 경주대학교 건설환경연구소 2000 建設環境論叢 Vol.- No.3
In this paper, the removal rate of NO in a reactor is measured first using nonthermal plasma generated from a wire-cylinder type reactor, then the discharge image and horizontal signal strength and vertical signal strength of NO particles is observed using ICCD(Intensified Charged Coupled Device) camera. It was found that NO removal rate was increased with NO concetration decreasing, and that horizontal signal strength and vertical signal strength were also increased with NO concentration decreasing. Especially, this research is aimed at clarifying the NO characteristics by observing the images of AC discharge when the nonthermal plasma generated by as discharge( electrical method ) was used.
최찬환,황용연,최준순 대한건축학회 2004 대한건축학회논문집 Vol.20 No.2
This study is focusing on analyzing the effect and meaning of the zone on the lot divided by zoning line which is run by the current law to get rational solutions. Each evaluation applies to realistic and applicable methods according to regulations. The three ways of application methods on the zone of the selected lot divided by zoning appear are Land Area Method, Building Area Method, and Zone Method. All three ways have their own meanings and limitations to apply, but according to the analysis result, we could decide that Region Method is the most effective way. However, it has sever limitations when we design site plan, building-use and building form in a land, so complements are required for each of provisions. Therefore, We suggest new approach about the building development scale, and for building-use and a right to enjoy sunshine, We suggest complementary methods for each case. First, We apply for a complex method for deciding on the building development scale. Second, for determination of the building uses, We permit the mixed-usage when a building sets on the lot divided by zoning line, and for a right to enjoy sunshine, We select the application method for the bigger land.
CGI 프로그램에서 클라이언트와 서버의 자동화된 상태정보 전달
최준용,유진호,장종표,방만원 木浦大學校 情報産業硏究所 1997 情報産業硏究誌 Vol.5 No.-
The HTTP Protocol composed of WWW's client/server model is unconnected and not keep state, so, there is one connection for one request. In this condition, it has no guarantee to memory which is needed in sequential processing, and HTTP Protocol has no choices to transfer the information from client to server's CGI or the information exchange. This paper uses the word 'key' instead of this 'state information'. We studied the key which creates automatically the HTML document for data search hierarchically in WWW environment and to confirm applied this to multimedia order and sale system of agricultural and marine products.
용도지역 경계부 유형과 개발현황에 관한 연구 : 노선상업지역과 일반주거지역 경계부 대지를 중심으로
최찬환,황용연,최준순 대한건축학회 2003 대한건축학회논문집 Vol.19 No.11
This study has focused on investigating the types of border which are divided by the zoning district in Seoul and has analyzed the process of subdividing and amalgamating a lot including several zones among the type of border, which is located between dwelling distirct and commercial district. As a result, a lot including several zones has been had the process of subdividing and amalgamating in order to increase the development capacity, and this process has been accepted as an legal action by rule that zoning can be dicided by the majority which is occupied with zoning area in a lot including several zones. We suggest how to estimate the 'floor area ratio'&'building coverage ratio'by respective zone's area ratio in the Lots Divided by Zoning-Lines.