근 피판술을 이용한 기관흉막루의 치료

류한영,설정현,김정철,한승세,우상현,최시호 大韓成形外科學會 1991 Archives of Plastic Surgery Vol.18 No.2

Bronchopleural fistula and chronic empyema are the difficult problems in the thoracic surgery field. We experienced 3 cases of chronic empyema and complicated bronchopleural fistulas treated with muscle flap and concomitant thoracoplasty. The causative primary diseases were pulmonary tuberculosis and bronchiectasis. All the three cases have failed to control the chronic empyema and bronchopleural fistula with conventional method such as closed or open drainage and Eloesser flap after lobectomy. The unresponsive infection on bronchopleural fistula and pleural space was well controlled after muscle flap with thoracoplasty. Complete decortication, closure of bronchopleural fistula as much as possible and coverage of closed fistula with good vascularized tissue are the essential factors for the success of operation on chronic empyema and bronchopleural fistula. The results of operations were satisfactory and the respiratory function was well preserved or improved in one patient. But, the contour of chest wall was deformed in patient with extensive concomitant thoracoplasty.

혈액투석중인 말기신부전 환자에서 Fludrocortisone acetate (FCA) 투여 후 혈청 칼륨 저하 효과

류봉관,강대웅,정지용,윤나라,신병철,박경희,정종훈,김현리 朝鮮大學校 附設 醫學硏究所 2005 The Medical Journal of Chosun University Vol.30 No.1

Background: Hyperkalemia is a commonly encountered problem in dialysis patients with end-stage renal disease. In this study we evaluated the effect of mineralocorticoid therapy (fludrocortisono acetate) on serum potassium level in the serum of hyperkalemic end-stage renal disease patients. Methods: Fourteen patients on hemodialysis receiving fludrocortisone acetate (FCA) 0.1 mg/day were observed for 2 months periods. Consecutive monthly biochemical profiles were compared for the druration of the pre-and post-treatment of FCA. Result: Fourteen patients with mean age (±SE) of 51.5 years (4 males and 10 females) and mean hemodialysis period of 51.9 months were studied. Mean serum potassium levels significantly fell (p<0.05) during the post-FCA period (5.2±0.66 mEq/L) compared with potassium levels during the pre-FCA (5.8±0.43 mEq/L) period. Pre-and post-FCA values were not different for sodium, chloride, protein, albumin, AST/ALT, glucose, blood nitrogen, creatinine, phosphate and calcium. Conclusions: FCA appears to decrease serum potassium value in patients with end-stage renal disease. These results suggested that FCA could be effective to treat hyperkalemia without any adverse effect in patients undergoing hemodialysis.

방사선 치료를 받는 암 환자들의 사회적 지지와 삶의 질과의 관계

정주희,류소연,윤혜은,남택근,오윤경,안현옥,박계남,이영선 朝鮮大學校 附設 醫學硏究所 2002 The Medical Journal of Chosun University Vol.27 No.2

Objective : This study was performed to investigate the relationship between social support and quality of life among cancer patients receiving radiation therapy. Matehals and Methods : The data were collected from 98 patients, who were receiving radiation therapy at two university hospitals located in GwangUJu, used by structured questionnaire. For statistical analyses of the association between quality of life and various characteristics, data were analyzed using t-test, ANOVA, Pearson 's correlation, and multiple regression analysis. Results: 1. There were 56(57.1%) males and 42(42.9%) females. Age ranged from 21 to 82 years. The primary sites of cancer were gastrointestinal tract (24.5%), lung (23.5%), breast (21.4%), and head and neck (11.2%) in order. 2. The mean scores of social, family, and medical support were 4.30 0.58, 4.49 0.78, 4.11 0.65, respectively. The score of quality of life was 5.83 1.63 (range: 1.95 ~ 9.05). 3. An analysis of the association between several factors of patients and quality of life showed that the statistically significant factors were age, the presence of distant metastasis, family support, medical support and social support. 4. As a result of the multiple regression analysis, only social support was significant (β=0.932, P=0.02) with quality of life, but age and presence of distant metastasis were not significant. Conclusion : This suggests that quality of life in cancer patients could be improved by strengthening the social support which consists of family and medical support. Further study would be necessary to evaluate separately several aspects of quality of life among cancer patients.

교정장치로부터의 니켈과 크롬의 유리에 관한 연구

류정현,오소택,강경화,김상철 대한치과교정학회 2003 대한치과교정학회지 Vol.33 No.5

니켈과 크롬은 대부분의 교정장치를 제작하는데 사용되는 합금을 구성하는 주요한 금속이다. 그러나 이들 금속은 과민반응, 피부염, 천식 등의 주요한 원인이 되며, 이들 금속의 우발적인 흡입에 의해 암이 유발될 수 있음이 보고된바 있다. 이에 하악 standard edgewise 브라켓을 이용한 사분악의 교정 장치를 37℃, 0.05% NaCl 용액에 저장하여 교정장치의 부식에 의해 유리된 니켈과 크롬을 Inductively Coupled Plasma(ICP) spectroanalyzer를 이용하여 측정하였다. 교정장치로부터, 1일 평균 9.83-70.0㎍/day의 니켈이 유리되었으나, 크롬은 10ppb 측정한계에서 측정불가능 하였다. 니켈 유리량은 제품에 따라 유의한 차이를 가져왔다. Galvanic 조건이나 Sand blasting 처리는 니켈 유리량에 증가를 가져왔으나 통계학적으로 유의하지 않았다. Nickel and chromium are two major metals used in the alloys of most orthodontic appliances. But these metals arc known to cause hypersensitivity, dermatitis, and asthma. In addition, a significant carcinogenic and mutagenic potential has been demonstrated for compounds containing these metals. The purpose of this study was to find out how much nickel and chromium was released from orthodontic appliances, and which factors would influence the release. The simulated orthodontic appliances were constructed for a half of a mandibular arch and incubated in 0.05% NaCl solution at 37℃. Nickel and chromium release was quantified with an Inductively Coupled Plasma (ICP) spectroanalyzer. The results were as follows 1. From simulated orthodontic appliances, nickel was released 9.83-70.0㎍/day but the release of chromium was not detectable in limit of l0ppb. 2. The amount of nickel release was significantly different between the types of appliances. 3. The galvanic condition increased the amount of nickel release, which was not statistically significant. 4. The sand blasting increased the amount of nickel release, which was also not statistically significant.

교정장치로부터의 니켈과 크롬의 유리에 관한 연구

류정현,김상철 원광대학교 생체재료·매식연구소 1998 원광생체재료·매식 Vol.7 No.2

Nickel and chromium are two major metals used in the alloys of most orthodontic appliances. But these metals are known to cause hypersensivity, dermatitis, and asthma. In addition, a significant carcinogenic and mutagenic potential has been demonstrated for compounds containing these metals. The purpose of this study was to find out how much nikel and chromium was released from orthodontic appliances, and which factors would influence the release. The simulated orthodontic appliances were constructed for a half of a mandibular arch and incubated in 0.05% NaCl solution at 37℃. Nickel and chromium release was quantified with an Inductively Coupled Plasma (ICP) spectroanalyzer. The results were as follows : 1. From simulated orthodontic appliances, nickel was released 9.83-70.0 ㎍/day but the release of chromium was not detectable in limit of 10ppb. 2. The amount of nickel release was significantly different between the types of appliances. 3. The galvanic condition increased the amount of nickel release, which was not statistically significant. 4. The sand blasting increased the amount of nickel release, which was also not statistically significant.

Dimethomorph의 제형에 따른 고추 역병 방제 효과

박정용,류연주,류나현,이용세 대구대학교 생명과학연구소 2004 생명과학연구 Vol.3 No.1

Dimethomorph(DMM) is an effective Oomycete fungicide useful for the control of late blight of potato and pepper by preventative sprays. Efficacy of five formulations, suspension concentrate (DM150), wettable powder (DM250) and three different dispersible concentrates (DM630, DM631, DM632), were investigated in their biological activity against phytophthora blight of red-pepper in vitro and in vivo. Their in vitro biological activities against mycelial growth, zoosporangial formation and zoosporangial germination of Phytophthora capsici were similar. The incidence of late blight on red pepper plants was progressively increased from June 11 to August 8 in untreated plants. However, in the case of DMM treated plants diseased plants, were increased after July 11. When compared with that on July 11, the incidence of late blight on July 18 in the treated plants except in DM630 were increased drastically. This increase were thought to be the result of flooding with more than 80 mm rainfall at July 15. The incidence of late blight on July 29 in the treated plants were increased compared with that on July 18. These also thought to be the result of flooding with more than 100 mm rainfall on July 23. All of the tested DMM formulations showed similar high control value against the late phytophthora blight on red pepper plants in the field test until July 11. However, after flooding the test field, DM630 showed the greatest disease control efficacy. DM250 showed relatively poor disease control efficacy in the test. Therefore more studies on the DM630 formulation are needed.

최대/최소 경계 스키마 추출 기법을 이용한 XML 문서의 DTD 추출

박경현,최은선,이종연,박정석,류근호 충북대학교 컴퓨터정보통신 연구소 2000 컴퓨터정보통신연구 Vol.8 No.2

XML이 인터넷상의 데이터 교환의 표준으로 대두되면서 데이터 모델이나 플랫폼에 관계없이 데이터의 전송이 가능하게 되었다. 특히 데이터 중심의 XML 문서의 경우 전송시의 부하를 줄이기 위해 DTD없이 전송되는 경우가 일반적이다. 그러한 이유로 전송받은 XML 데이터의 저장 효율을 높이고 질의를 최적화하며 사용자에게 편의성을 제공해주기 위해서는 XML 데이터로부터 DTD 추출이 필수적으로 요구된다. 이 논문에서는 이러한 DTD를 추출하기 위해 반구조적 데이터의 스키마 추출 기법을 적용한다. 특히, 반구조적 데이터의 최소 경계 스키마를 추출하는데 데이터로그를 이용하는 기존의 방법보다 효율적인 방법인 시뮬레이션을 적용함으로써 보다 향상된 DTD 추출 기법을 제시한다. XML makes it possible for data to be exchanged regardless of the data model in which it is represented or the platform on which it is stored, serving as a standard for data exchange format on the internet. Especially, It is natural to send XML data without DTD on the internet when XML is data-centric XML. Therefore it is needed to extract DTD to store XML data efficiently, to optimize queries, and to help users browse XML data. In this paper, Techniques for upper/lower bound schema extraction are applied to extract DTD from XML data. Especially we propose an efficient technique for extracting DTD by using simulation which is better than datalog as a lower bound schema extraction method.

셀레콕시브 및 그 합성유도체들의 항암활성 스크리닝

박정란,강진형,구효정,노지영,류형철,박상욱,고동현,조일환,이주영,황다니엘,김인경 한국약제학회 2003 Journal of Pharmaceutical Investigation Vol.33 No.2

Selective COX (cyclooxygenase)-2 inhibitors including celecoxib have been shown to induce apoptosis and cell cycle changes in various tumor cells. New inhibitors are recently being developed as chemomodulating agents. We evaluated celecoxib and screened 150 synthetic compounds for anti-proliferative activities in vitro. Effects of celecoxib on COX activity, cell growth, cell cycle distribution, and apoptosis induction were determined in A549 COX-2 overexpressing human non-small cell lung cancer (NSCLC) cells. The COX inhibition of celecoxib increased with concentration up to 82% at 1μM after 24 hr exposure. Forty μM and 50μM of celecoxib induce G_1 arrest, and TUNEL-positive apoptotic cells, respectively. Among 150 compounds, several compounds were selected for having greater COX-2 inhibitory activity and higher selectivity than celecoxib with growth inhibitory activity. Celecoxib showed concentration-dependent COX inhibitory activity, and ability to induce cell cycle arrest and apoptosis in human NSCLC cells in vitro. Among synthetic analogues screened, several compounds showed promising in vitro activity as COX-2 inhibitory anticancer agents, which warrant further evaluation in vitro and in vivo.

치은부에 이중인공진피(Terudermis^(�) 이식 후 조직학적 평가

김민정,정현주,류승희,박병주 전남대학교 치의학연구소 2003 구강과학 Vol.15 No.4

The autogenous free gingival graft is the most predictable procedure currently used to increase the width of the attached gingiva in periodontal therapy. But the major disadvantage of the procedure is to create the 2ndary multiple surgical wounds at both a donor site and a recipient site. The other problem is the limited amount of available graft material. Therefore, recent researches have been focused on the development of the biomaterial to substitute gingival tissue. The purpose of this study was to compare the histologic healing after grafting of bilayer artificial dermis and free gingival graft. Four non-smoking subjects (mean age, 32.5 years) in systemically healthy state and good oral hygiene were selected according to their particular needs for correction of mucogingival deformities as suggested by Nabers : 1) zones of minimal attached gingiva, 2) areas of thin gingiva, 3) areas of inadequate vestibular formation, and 4) frenum problems. The recipient sites were prepared through the conventional free gingival graft procedure and were grouped according to the graft materials : Experimental group-bilayer artificial dermis (Terudermis ; Terumo Co. Japan)(n=5) ; Control group-free gingival graft with autogenous palatal mucosa(n=6). Biopsies were harvested from 11 sites (containing adjacent attached gingiva and graft) at 1, 2, 3 and 6 weeks postsurgery to evaluate histologic healing. At the third week in the experimental group and at the second week of in the control group, the grafts has been stabilized on the recipient bed and the graft border has been blended into the surrounding tissue. In the experimental group, the epitheial migration from the adjacent tissue to graft was observed after 1 week of grafting and the distribution of the inflammatory cells were reduced, collagen layer of the artificial dermis was lost and the basement membrane was formed after 3 weeks of grafting. At 6 weeks of grafting, both groups demonstrated orthokeratinized epithelium and increased thickness of epithelial tissue, similar to the adjacent tissue and the rete peg formation. It was difficult to distinguish the graft from adjacent normal tissue. Histologic evaluation revealed a biologic acceptance and incorporation of the collagen layers of the graft tissue to the host tissue, without severe inflammatory response. In conclusion, a bilayer artificial dermis is essentially similar to autogeneous free gingival graft in the correction of mucogingival problems, and has the advantages of decreased patient morbidity(no donor site) and availability of abundant amounts of graft material when needed.

디이젤기관의 연소특성에 관한 연구(Ⅰ)

최두석,김창현,조규상,류정인 忠南大學校 産業技術硏究所 1987 산업기술연구논문집 Vol.2 No.1

A Computer program for the precombustion chamber type 4 cycle C.I.engine using two-zone model and quasi-steady model has been developed. Comparing with experimental results, the calculated results have about 10% of deviation. Through the numerical analysis, the direction of optimum engine design condition can be obtained as follows; 1) From the numerical solution, the optimal driving points of experimental engine are as follows. Engine speed is 2500 - 3000rpm and the injection timing is 15-20。BTDC, When the economy of fuel is considered, and when the engine is driven under 2100 rpm and fuel is injectioned at 25。BTDC, the maximum output can be obtained. 2) The maximum cylinder pressure increase about 3% at every 400 rpm, and increase about 20% whenever the injection time is advanced at 5 degrees. 3) The volumetric efficiency decrease about 9% at every 400rpm.