http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
BFRP 외부보강재의 형태에 따른 RC 보의 휨 성능 평가
심우석 ( Shim Woo-seok ),이상문 ( Lee Sang-moon ),정우영 ( Jung Wo-young ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.1
실제 현장에서 RC 보의 휨 성능을 향상시킬 목적으로 대부분 GFRP 보강재(유리섬유)가 사용되고 있지만,폐기 시 다량의 오염 물질을 배출하는 단점이 있다. 이와 같은 부분을 보완하기 위해 선행연구에서는 친환경적인 BFRP 보강재(현무암섬 유)로 대체하여 실험이 수행되었으며, GFRP 보강재와 유사한 성능이 나타나는 것으로 분석되었다. 하지만, 보강재의 부착성능이 저하됨에 따른 RC보 단부에 응력집중 현상이 나타났다. 이에 따라 본 연구에서는 보강재가 부착되는 유효단면적을 매 개변수로 2가지 형태의 BFRP 보강재를 제작하였으며, 이에 따른 성능을 선행연구와 비교하였다. 결과적으로, Single Web-Type과 Double Web-Type으로 보강한 RC보는 Normal-Type으로 보강한 RC보에 비해 균열 수는 각각 26.67%,20% 감소하였고, 항복응력은 각각 4.57%, 9.33% 증가하는 것으로 나타나 유효부착면적이 증가할수록 RC보의 보강 휨 성능이 향상되는 것을 알 수 있다.
CFRP 그리드의 고정 경계 조건 개발 및 고온 노출에 따른 인장 성능평가
심우석,최석원,이상문,정우영 한국복합신소재구조학회 2024 복합신소재구조학회 학술발표회 Vol.2024 No.04
FRP 복합재 중 CFRP(Carbon Fiber Reinforcement Plastic)는 현재 Rebar, Plate, Grid 등 다양한 형태로 RC 구조물에 내‧외부 보강재로써 사용되고 있다. 이 중 CFRP Grid의 경우 국내에서 상용화가 되지 않아 다른 형태의 보강재보다 성능 분석 및 평가 기준이 미흡한 실정이다. 이에 따라 본 연구에 서는 Grid의 Strand, 경계조건, ASTM 고정장치의 유무 등 다양한 실험을 통하여 CFRP 그리드의 인 장 성능평가를 진행하였다. 선행 연구에서는 CFRP Grid의 인장시험 고정단의 경계조건에 따른 영향 성 분석을 위해 ASTM D7205 및 ASTM D6637에 따라 Tap-Tap (Type 1), Tap-Mortor (Type 2) 로 구성하여 인장시험을 수행하였으며, 시편의 파단 형상 및 시험 결과값이 가장 안정적인 Type 2를 CFRP Grid의 고정단 경계조건으로 설정하였다. 이러한 선행 연구를 바탕으로 고온 노출에 따른 CFRP 그리드의 인장 성능시험 평가를 진행하였으며, 인장시험은 만능재료시험기 및 고성능 카메라를 활용하여 최대 응력과 탄성계수를 도출하였다. 온도는 FRP의 전이온도인 150℃ 이내의 130℃에서 각 Case 별 5개의 시편을 70분(Case 2), 100분(Case 3), 120분(Case 4), 150분(Case 5) 노출한 후, 고온 에 노출하지 않은 시편(Case 1)과 비교하였다. 실험 결과, Case 5와 Case 1을 비교하여 인장강도와 탄성계수는 각각 최대 51.32%, 44.4% 감소하였다. 결론적으로 고온 환경에서 지속적으로 노출될 경 우, CFRP Grid의 성능이 최대 절반 수준으로 감소 되며 RC 부재 내‧외부에 보강 시에 고온 조건을 면밀히 검토하여 성능 감소를 최소화할 필요가 있다고 판단된다.
Design of Ultra-wide Band-pass Filter Based on Metamaterials Applicable to Microwave Photonics
이종민,심우석,문용,서철헌 한국광학회 2012 Current Optics and Photonics Vol.16 No.3
We designed an ultra-wide band-pass filter applicable to microwave reflectometry for KSTAR (Korea Superconducting Tokamak Advanced Research) and to microwave photonics. The proposed ultra-wide band-pass filter exhibits a metamaterial structure characterized by a wide band, low insertion loss, and high skirt selectivity. The proposed filter is applied to enhance the linearity of reflectometry at the output of a VCO (voltage controlled oscillator). The pass-band of the proposed filter is observed at 18~28 GHz,and the out-of-band rejection is below 20 dB. Further, we constructed an unwrapped negative phase of S(2, 1) to verify the characteristics of the metamaterial. The under- and upper-band at lower limits of the pass-band are left- and right-handed, respectively. The group delay of the filter is less than 0.5 ns.
Genuine traditional Korean medicine, BaekJeol-Tang for the treatment of rheumatoid arthritis
한나라,심우문,설무창,김민철,이창희,김동원,이세훈,이호철,류중민,남봉수,김종옥,문성오,장현록,김영석,이인,양진영,황규선,천창선,정현석 셀메드 세포교정의약학회 2013 셀메드 (CellMed) Vol.3 No.2
Inflammation in rheumatoid arthritis is characterized by immune cell infiltration and cytokine secretion. In particular, mast cells and their cytokines play an important role in the pathogenesis of rheumatoid arthritis. Korean medicine, BaekJeol-Tang (BT) was designed by traditional Korean medicine theory. We already reported therapeutic effect of BT in rheumatoid arthritis. Here, we report the specific underlying mechanism of BT in activated human mast cells, HMC-1 cells. In addition, we report for the first time that BT significantly inhibited the production and mRNA expression of proinflammatory cytokines including thymic stromal lymphopoietin, interleukin (IL)-1β, IL-6, IL-8, and tumor necrosis factor-α in activated HMC-1 cells. BT also decreased the activation of mitogen-activated protein kinases, nuclear factor-κB, and caspapase-1. Taken together, these results indicate that BT has potential as a regulator of inflammatory reactions for the treatment of arthritis such as osteoarthritis and rheumatoid arthritis.
ROS(Robot Operating System) 기반 자율주행 배송 플랫폼 아키텍쳐 설계
손영광(Younggwang Son),정경섭(kyeongsub Jeong),노승현(Seunghyeon Noh),이주현(Juhyeon Lee),문대영(Daeyoung Moon),심우현(Woohyun Sim),주형진(Hyeongjin Joo),전영훈(Younghoon Jeon),김범준(Beomjoon Kim),이기범(Kibeom Lee) 한국자동차공학회 2020 한국자동차공학회 학술대회 및 전시회 Vol.2020 No.11
Recently, there is a lot of demand for non-face-to-face food and parcel delivery. The autonomous delivery platforms require high-level autonomous driving technology to drive on general roads and cope with unexpected situations. However, much research has not been conducted compared to autonomous vehicles (AV). Autonomous delivery platforms are equipped with various sensors such as LiDAR, Camera, GPS, and IMU. Such sensors need to select the optimal equip position and angle according to the size or shape of the platform. Also, in order to implement an autonomous delivery system, various driving algorithms are required and integration of each element algorithm is essential. In this research, a variable platform is designed to easily set the position to optimize the sensor performance. An autonomous driving algorithm structure for modularization is developed.