http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Aperture를 이용한 Hairpin 발진기의 위상잡음 개선에 관한 연구
서철헌 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.8
본 논문에서는 Hairpin 발진기의 위상잡음을 개선시키기 위하여 접지 면에 Aperture를 구현하였다 Aperture를 마이크로스 트립 Hairpin 공진기에 적용함으로써 결합계수의 증가로 인해 마이크로스트립라인이 가지고 있는 Q값을 증가시켰다. 기존의 마이크로스트립 Hairpin 발진기와 비교하였을 때 Aperture를 적용한 발진기가 위상잡음을 100KHz offset에서 약 19dBc 개선시켰다. 제작된 발진기는 5.83GHz 대역이고, 출력전력은 -4.33dBm을 획득하였다. Aperture has been employed on the ground plane in the Hairpin resonator. Aperture made by etching the part of the ground effected coupling coefficient and then quality factor of Hairpin resonator has been increased. When the hair pin oscillator using aperture has been compared with the conventional hair pin oscillator using microstrip, it has been improved the phase noise about 19dBc @100KHz. Oscillation frequency of the hair pin oscillator using aperture has been 5.83GHz band and output power is -4.33dBm.
서철헌 崇實大學校 2000 論文集 Vol.30 No.1
In this paper, a 1*4 active phased array antenna was designed using the voltage controlled oscillators(VCO) with the varactor diode and the transmission line network with open stub. The varactor diode was connected in parallel to the FET for the wide tuning range of the VCO and the open stubs were connected at the end of the transmission line network to increase the scan range. The scan range, -20 degree to 22 degree at 2.44GHz, was controlled by the applied varactor diode voltage and the transmission line coupling network.
Photonic Bandgap 구조를 이용한 저 위상잡음 듀얼밴드 VCO에 관한 연구
서철헌,조용기 대한전자공학회 2004 電子工學會論文誌-TC (Telecommunications) Vol.41 No.2
In this paper, the low-phase dual-band VCO, by adding switching circuit with PIN diode at feedback loop of the oscillation part having negative-resistance, is realized. In order to reduce the phase noise of the VCO, PBG structure applied to the ground plane of the resonator. When applying for PBG structure, output power is -9.17dBm and phase noise is -102dBc/Hz at 5.25GHz, output power is -5.17dBm and phase noise is -101dBc/Hz at 1.8GHz, respectively. 본 논문에서는 부성저항을 갖는 발진부의 귀환 경로에 PIN 다이오드를 이용한 스위칭 회로를 추가하여 저 위상잡음 듀얼밴드 전압제어 발진기를 구현하였다. PIN 다이오드에 전원이 인가되지 않았을 때는 5GHz 대역에서 발진이 일어나고, 인가되었을 때는 1.8GHz 대역에서 발진이 일어난다. VCO의 위상잡음을 향상시키기 위하여 공진기에 PBG(Photonic Bandgap)구조를 접지 면에 적용하였다. 5.25GHz에서 출력 전력은 -9.17dBm, 위상잡음은 -102dBc/Hz이고, 1.8GHz에서 출력 전력은 -5.17dBm, 위상잡음은 -101dBc/Hz이다.