갈색세포종과 복부 부신경절종의 임상적 특성 분석

김상훈,정승필,이정희,김지영,최민영,이세경,최준호,이정언,김지수,남석진,양정현<SUP>1<.SUP>,김정한,Sang-Hoon Kim,Seung-Pil Jung,Jeong-Hee Lee,Ji-Yeong Kim,Min-Yeong Choi,Se-Kyung Lee,Jun-Ho Choe,Jeong-Eon Lee,Jee Soo Kim,Seok-Jin Nam,Jung- 대한갑상선-내분비외과학회 2011 The Koreran journal of Endocrine Surgery Vol.11 No.4

용접 열영향부 미세조직 및 재질 예측 모델링: V. 저합금강의 초기 오스테나이트 결정립크기 및 냉각 속도의 영향을 고려한 용접 열영향부 상변태 모델

김상훈,문준오,이윤기,정홍철,이창희,Kim, Sang-Hoon,Moon, Joon-Oh,Lee, Yoon-Ki,Jeong, Hong-Chul,Lee, Chang-Hee 대한용접접합학회 2010 대한용접·접합학회지 Vol.28 No.3

In this study, to predict the microstructure in weld HAZ of low alloyed steel, prediction model for the phase transformation considering the influence of prior austenite grain size and cooling rate was developed. For this study, six low alloyed steels were designed and the effect of alloying elements was also investigated. In order to develop the prediction model for ferrite transformation, isothermal ferrite transformation behaviors were analyzed by dilatometer system and 'Avrami equation' which was modified to consider the effect of prior austenite grain size. After that, model for ferrite phase transformation during continuous cooling was proposed based on the isothermal ferrite transformation model through applying the 'Additivity rule'. Also, start temperatures of ferrite transformation were predicted by $A_{r3}$ considering the cooling rate. CCT diagram was calculated through this model, these results were in good agreement with the experimental results. After ferrite transformation, bainite transformation was predicted using Esaka model which corresponded most closely to the experimental results among various models. The start temperatures of bainite transformation were determined using K. J. Lee model. Phase fraction of martensite was obtained according to phase fractions of ferrite and bainite.

UHF대역 RFID 수신단(리더)의 지터(비트동기) 및 글리치 제거회로 설계

김상훈,이용주,심재희,이용석,Kim, Sang-Hoon,Lee, Yong-Joo,Sim, Jae-Hee,Lee, Yong-Surk 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.1A

본 논문에서는 ISO/IEC 18000-6C 표준안을 만족하는 UHF대역 RFID 수신단(리더)의 지터(Jitter)처리와 글리치제거 알고리듬 및 설계방안을 제안하고 이를 이용한 리더를 구현하여 실제 TI(Texas instrument) Gen2 태그의 응답을 분석하였다. ISO/IEC 18000-6C표준안은 Reader에서 Tag로 데이터 전송 시 +/-1%의 오차와 Tag에서 Reader로 데이터 전송 시 최대 +/-22%의 오차를 허용하도록 정의하고 있다. 이러한 허용오차범위 내의 데이터에 대해 본 논문에서 제시한 회로는 기존의 PLL(DPLL, ADPLL)을 이용한 방식이 아닌 최대허용치(tolerance)와 허용치누적을 이용하여 일정치의 오차범위를 허용하며 디코딩 하도록 설계하였다. 또한 글리치와 지터제거 알고리듬의 기본원리를 동일하게 구성하여 글리치제거와 지터제거를 따로 구분하지 않고 하나의 기능으로 동작하게 한다. 주 클럭은 19.2MHz로 설정하였으며 LF는 국내 전파법에 맞도록 40kHz로 설정하였다 시뮬레이션결과 15%이하의 위상지터를 가진 입력데이터에 대해 판독에러율은 0이었으며 $15%{\sim}22%$ 위상지터를 가진 입력데이터에 대해서 는 0.000589였다. 그러나 동적LF생성회로를 사용한 결과 $15%{\sim}22%$ 위상변화를 가진 입력데이터에 대해 판독에러율은 0이었으며 표준안에 정의된 최대 +/-22%오차 범위내의 지터 발생에 대해서 판독에러율은 0이었다. In this paper, we propose an implementation and an algorithm of 'Jitter and Glitch Removing Circuit' for UHF RFID reader system based on ISO/IEC 18000-6C standard. We analyze the response of TI(Texas Instrument) Gen2 tag with a reader using the proposed algorithm. In ISO/IEC 18000-6C standard, a bit rate accuracy(tolerance) is up to +/-22% during tag-to-interrogator communication and +/-1% during interrogator-to-tag communication. In order to solve tolerance problems, we implement the Jitter and Glitch Removing Circuit using the concept of tolerance and tolerance-accumulation instead of PLL(DPLL, ADPLL). The main clock is 19.2MHz and the LF(Link Frequency) is determined as 40kHz to meet the local radio regulation in korea. As a result of simulations, the error-rate is zero within 15% tolerance of tag responses. And in the case of using the adaptive LF generation circuit, the error-rate varies from 0.000589 to zero between 15% and 22% tolerance of tag responses. In conclusion, the error-rate is zero between 0%-22% tolerance of tag response specified in ISO/IEC 18000-6C standard.

Facial Features and Motion Recovery using multi-modal information and Paraperspective Camera Model

김상훈,Kim, Sang-Hoon Korea Information Processing Society 2002 정보처리학회논문지B Vol.9 No.5

Robust extraction of 3D facial features and global motion information from 2D image sequence for the MPEG-4 SNHC face model encoding is described. The facial regions are detected from image sequence using multi-modal fusion technique that combines range, color and motion information. 23 facial features among the MPEG-4 FDP (Face Definition Parameters) are extracted automatically inside the facial region using color transform (GSCD, BWCD) and morphological processing. The extracted facial features are used to recover the 3D shape and global motion of the object using paraperspective camera model and SVD (Singular Value Decomposition) factorization method. A 3D synthetic object is designed and tested to show the performance of proposed algorithm. The recovered 3D motion information is transformed into global motion parameters of FAP (Face Animation Parameters) of the MPEG-4 to synchronize a generic face model with a real face. 본 논문은 MPEG4 SNHC의 얼굴 모델 인코딩을 구현하기 위하여 연속된 2차원 영상으로부터 얼굴영역을 검출하고, 얼굴의 특징데이터들을 추출한 후, 얼굴의 3차원 모양 및 움직임 정보를 복원하는 알고리즘과 결과를 제시한다. 얼굴 영역 검출을 위해서 영상의 거리, 피부색상, 움직임 색상정보등을 융합시킨 멀티모달합성의 방법이 사용되었다. 결정된 얼굴영역에서는 MPEG4의 FDP(Face Definition Parameter) 에서 제시된 특징점 위치중 23개의 주요 얼굴 특징점을 추출하며 추출성능을 향상시키기 위하여 GSCD(Generalized Skin Color Distribution), BWCD(Black and White Color Distribution)등의 움직임색상 변환기법과 형태연산 방법이 제시되었다. 추출된 2차원 얼팔 특징점들로부터 얼굴의 3차원 모양, 움직임 정보를 복원하기 위하여 준원근 카메라 모델을 적용하여 SVD(Singular Value Decomposition)에 의한 인수분해연산을 수행하였다. 본 논문에서 제시된 방법들의 성능을 객관적으로 평가하기 위하여 크기와 위치가 알려진 3차원 물체에 대해 실험을 행하였으며, 복원된 얼굴의 움직임 정보는 MPEG4 FAP(Face Animation Parameter)로 변환된 후, 인터넷상에서 확인이 가능한 가상얼굴모델에 인코딩되어 실제 얼굴파 일치하는 모습을 확인하였다.

Seismic Performance of Transportation Networks

김상훈,김종인,Kim, Sang-Hoon,Massanobu, Shinozuka,Kim, Jong-In Earthquake Engineering Society of Korea 2004 한국지진공학회논문집 Vol.8 No.3

본 연구는 캘리포니아 내 고속도로망을 대상으로 지진발생 후 교통흐름의 변화를 평가하는 기법에 대하여 이루어졌으며, 고속도로망 상에 위치한 교량의 손상정도가 평가기법의 가장 기본적인 요소로 사용되었다. 본 연구에 사용된 교량의 지진취약도는 PGA 또는 PGV의 함수로 나타내어졌고, 1994년 Northridge 지진과 일련의 시나리오 지진에 대하여 교통망 손상 평가를 수행하였다. 또한 교량 보수 및 보강 후 교통망에 대한 피해정도를 정량화하기 위해 확률모델을 개발하였으며, 그 피해정도는 시간(Drivers Delay)으로 나타내었다. 본 연구가 캘리포니아를 대상으로 이루어져 국내적용 및 활용가능성에 대해서는 후속 연구가 뒤따라야 할 것으로 사료된다. This paper describes a method of evaluating seismic system performance of highway transportation network in California. The basic element that plays a crucial role in this study is the fragility information of highway bridges in Caltrans' (California Department of Transportation) freeway network. The bridge fragility information is expressed as a function of the ground motion intensity, such as peak ground acceleration (PGA) or peak ground velocity (PGV). Network damage was evaluated under the 1994 Northridge earthquake and scenario earthquakes. A probabilistic model was developed to determine the effect of repair of bridge damage on the improvement of the network performance as days passed after the event. As an example, the system performance degradation measured in terms of an index, “Drivers Delay”, is calculated for the Los Angeles area transportation system, and losses due to Drivers Delay with and without retrofit were estimated.

과산화수소 증기를 이용한 다양한 쿠폰 표면의 Geobacillus Stearothermophilus 아포 제독조건

김상훈,정경화,김세계,채영규,김윤기,황현철,김민철,박명규,류삼곤,Kim, Sang Hoon,Jung, Kyoung Hwa,Kim, Se Kye,Chai, Young Gyu,Kim, Yun Ki,Hwang, Hyun Chul,Kim, Min Cheol,Park, Myung Kyu,Ryu, Sam Gon 한국군사과학기술학회 2013 한국군사과학기술학회지 Vol.16 No.4

Biological decontamination means the removal of microorganisms from the inanimate object such as building or equipment. In this study, hydrogen peroxide vapor efficacy test using VHP 1000ED system(Steris LifeSciences) were conducted for G. stearothermophilus spore with agent materials(aluminum, stainless steel, poly-carbonate, viton, silicone, kapton and glass). Total recovered spores exposed to hydrogen peroxide vapor(1.0 g/min) during 7, 15, 30, 60 min were calculated. As a result, all agent materials were totally decontaminated within 60 min at 1.0 g/min concentration with 35% hydrogen peroxide vapor. Finally, we could confirmed that hydrogen peroxide vapor possess sporicidal capacity of G. stearothermophilus and found the optimum decontamination conditions with VHP1000ED system.

사실적인 3D 얼굴 모델링 시스템

김상훈,Kim, Sang-Hoon 한국전자통신학회 2013 한국전자통신학회 논문지 Vol.8 No.8

본 논문은 사실적인 3D 얼굴 모델링과 얼굴 표정 생성 시스템을 제안한다. 사실적인 3D 얼굴 모델링 기법에서 개별적인 3D 얼굴 모양과 텍스쳐 맵을 만들기 위해 Generic Model Fitting 기법을 적용하였다. Generic Model Fitting에서 Deformation Function을 계산하기 위해 개별적인 얼굴과 Generic Model 사이의 대응점을 결정하였다. 그 후, Calibrated Stereo Camera로부터 캡쳐 된 영상들로부터 특징점을 3D로 복원하였다. 텍스쳐 매핑을 위해 Fitted된 Generic Model을 영상으로 Projection하였고 사전에 정의된 Triangle Mesh에서 텍스쳐를 Generic Model에 매핑 하였다. 잘못된 텍스쳐 매핑을 방지하기 위해, Modified Interpolation Function을 사용한 간단한 방법을 제안하였다. 3D 얼굴 표정을 생성하기 위해 Vector Muscle기반 알고리즘을 사용하고, 보다 사실적인 표정 생성을 위해 Deformation 과 vector muscle 기반의 턱 rotation을 적용하였다. In this paper, we present realistic 3D head modeling and facial expression systems. For 3D head modeling, we perform generic model fitting to make individual head shape and texture mapping. To calculate the deformation function in the generic model fitting, we determine correspondence between individual heads and the generic model. Then, we reconstruct the feature points to 3D with simultaneously captured images from calibrated stereo camera. For texture mapping, we project the fitted generic model to image and map the texture in the predefined triangle mesh to generic model. To prevent extracting the wrong texture, we propose a simple method using a modified interpolation function. For generating 3D facial expression, we use the vector muscle based algorithm. For more realistic facial expression, we add the deformation of the skin according to the jaw rotation to basic vector muscle model and apply mass spring model. Finally, several 3D facial expression results are shown at the end of the paper.

신약 헬라어 본문 분석 방식의 새로운 연구

김상훈(Sang Hoon Kim) 한국복음주의신약학회 2007 신약연구 Vol.6 No.1

The New Testament Greek is often a compulsory pre-requisite course in theological seminary education. Although it becomes heavy burden to most students who take the course, spending much time to learn to read the NT in Greek, most of them fail to maintain their Greek after graduation. I think we need to advance some useful tool for Greek study, particularly from the pedagogical point of view, such as a syntactic-semantic arranged method contributed by Johannes Louw, Douglas Stuart, Walter Kaiser, Gordon Fee, William Mounce, and others. These sorts of methods differ from the traditional way of interpretation, the grammatical-historical method, in terms of how to approach the text. The texts arranged for the purpose of visualization, letting the reader to see the text with much clarity in terms of grammatical function of each phrase and their connections between them. The visualized arrangement itself is applied from the area of syntax and semantics in modern linguistics. There are various types of syntactic arrangements of the Greek text. Each pattern has its own principles and rules to be arranged in certain ways. I have compared, in this paper, those models of syntactic arrangements to my model, the Kim's diagram. For the purposes of this paper, I have posed several questions to my students in my classes, regarding their experiences on the syntactic-analytic arrangement of the Greek Bible (SAGB) and their practical uses of both the method and its materials, analyzing their questions in order to show up how much this type of study to be needed for the student

새로운 이온빔장치를 사용한 Twisted Nematic-LCD의 전기광학특성

김상훈,황정연,장미혜,김귀열,서대식,Kim Sang-Hoon,Hwang Jeoung-Yeon,Jang Mi-Hye,Kim Gwi-Yeol,Seo Dae-Shik 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.6

We studied liquid crystal (LC) alignment with ion beam (IB) on polyimide and electro-optical characteristics of twisted nematic (TN)-liquid crystal display (LCD) on the polyimide surface using obliquely ion beam (IB) exposure with new IB type equipment. A good uniform alignment of the nematic liquid crystal (NLC) alignment with the ion beam exposure on the polyimide surface was observed. In addition, it can be achieved the good EO properties of the ion-beam-aligned TN-LCD on polyimide surface. Also, the EO characteristics of the ion-beam-aligned TN-LCD on a polyimide (PI) surface with ion beam exposure using new type IB equipment is same or more superior than ion-beam-aligned TN-LCD on a polyimide (PI) surface with ion beam exposure using Kaufman-type Ar ion gun.

대학생의 흡연 유형 및 흡연과 심리사회적 요인의 관계에 관한 연구

김상훈,조용래,표경식,Kim, Sang-Hoon,Cho, Yong-Rae,Pyo, Kyung-Sik 한국정신신체의학회 1996 정신신체의학 Vol.4 No.2

For the purpose of examining the relationship between smoking, perceived stress and vulnerability factors, and furthermore suggesting interventions to reduce excessive smoking and prevent nicotine dependency effectively, the questionnaires of perceived stress(stressful experiences), ways of stress coping(passive and active copings), smoking motives, social influence, age, amounts of smoking, and nicotine dependency were administered to smokers among medical students in Chosun university(n=186). 1) As a result of classifying smokers by the types of smoking, the most was a type of smokers to reduce negative emotions and the next in order were addictive smokers, smoker for stimulation, smoker for pleasure, etc. 2) The effects of motive, age, and active coping style were significant, but the effects of perceived stress, passive coping style, and social influence were not significant in average amount of daily smoking. 3) The effects of motive, social influence, and age were significant, but the effects of perceived stress, passive and active coping styles were not significant in the degree of nicotine dependency. To summarize, it is concluded that there were a lot of people who smoke to solve negative emotions, but the direct effects of perceived stress and passive coping style on both average amounts of daily smoking and the degree of nicotine dependency were not significant. On the other hand, motive, age, active coping style, and social influence were proved to be more important variables than the others in explaining college students' smoking.