두경부 마사지가 중환자실 환자의 수면과 불안에 미치는 효과

김미용,전선영,송윤희,최은진,김재희,김미성,주명순,김남선 병원간호사회 2006 임상간호연구 Vol.11 No.2

Purpose: This study was to apply head and neck massage to patients in intensive care unit and to inventigate the effect of that massage on sleep and state anxiety. Method: The subjects in this study were 27 patients who were admitted in medical intensive care unit. The study was performed from June thru September of 2005 on the One-group pretest-posttest design and the sleep, state anxiety of the subjects were measured before and after head and neck massage. For data analysis, paired t-test and Pearson correlation coefficient were utilized. Result: The first hypothesis that the subjects might have a better sleep after being exposed to head and neck massage was accepted. The second hypothesis that the subjects might feel less state anxiety afrer being exposed to head and neck massage was accepted. The third hypothesis that the sleep of the ICU patients maight be correlated to their anxiety was accepted, as there appeared correlation between their sleep and anxiety. Conclusion: Head and neck massage is identified as one of independent nursing interwentions to improve the sleep of ICU patients and ease their anxiety, and it is necessary to apply it to clinical practices.

性別 및 年齡에 따른 體格과 體力의 特性과 變化에 關한 縱斷的 硏究Ⅱ : Emphasised on College Men of Department of Physical Education 體育專功 大學生을 中心으로

金尙國,姜東洹,張周鎬,金昇一,徐再均,金耕知,孫斗玉,鮮于攝,崔榮烈,尹宇相,金亨燉,方永鎭,朴英震,柳在忠 慶熙大學校 體育科學大學 1989 體育科學論叢 Vol.- No.2

The purpose of this study was to compare the characteristics, change in physique and physical function of college students majoring physical education and Taekwondo (454 males and 64 females of age groups ranging from 18 to 26). The results are as following: 1. The male group of 23yrs old in physical education showed highest values in 7 items(Weight, Chest Girth, Fore Arm Girth, Thigh Girth, Calf Girth, Scapular Skinfold Thickness and Suprailiac Skinfold Thickness). 2. In the Physical function, the male group of 18yrs old showed highest values in Power, Flexibility, and then 21yrs old at Back Strength, Vital Capacity, and 23yrs old at Grip Strength, and 25yrs old at Blood Pressure, respectively. 3. In the physique, the male group of 22yrs old showed highest values in Weight, Chest Girth, Thigh Girth, Calf Girth, and then 24yrs old Upper Arm Girth, Fore Arm Girth, and 19yrs old at Height, Upper Limb Length, respectively. 4. In Physical Function, the 22yrs old showed highest values in Back Strength, Vital Capacity, and then 23yrs old at Side Step, Trunk Extension, but 18yrs old showed lower Values in Grip Strength, Side Step, Vital Capacity and Blood Pressure. 5. The female group of 22yrs old showed highest values in 8 items(Height, Sitting Height, Waist Girth, Upper Limb Length, Lower Limb Length, Skinfold Thickness), and then 18yrs old at 5 items (Weight, Upper Arm Girth, Fore Arm Girth, Thigh Girth, Calf Girth), respectively. 6. In the physical function, the 22yrs old showed highest Values in Grip strength, Back Strength, Power, 5 Minute Run, and 18yrs old at flexibility, Harvard Step Test, respectively. 7. In the change of the physique for two years(1988-1989) in the male group, majoring Physical education the 22yrs old showed increase in 4 items, and the 20yrs old in 3 items, but 18yrs old showed decrease in 3 items. 8. In the change of the physical function for two years in the male group, the 20yrs old showed increase in 4 items, and the 21, 25, 26yrs old in 3 items, but the 19yrs old showed decrease in 6 items, and 18, 22 yrs old in 5 items, respectively. 9. The change of the physique for two years in all female group, of 18, 19, 20, 21yrs old showed increase in 11 items except Skinfold Thickness. 10. In the change of physical function for two years in female group, the 18yrs old showed increase in 3 items, and then 20yrs old in 5 items, but 19, 22yrs old decreased 12 items, respectively. 11. The highest significant difference in physique between male and female was found in weight(mean Value 17.5%), and the lowest difference was found Thigh Girth, Calf Girth(1,3%), Upper Limb Length, Lower Limb Length(2.5%). 12. The Highest difference in physical function was Strength (mean Value 40%), Vital Capacity (33%), Power(22%), but Lower Trunk Flexion, Foot Balance(3.4%). 13. In the difference of Physique and physical function between physical education major and taekwondo major, the physical education showed higher values in skinfold Thickines (mean Value 16.5%), Weight, Waist Girth(4.7%) and Strength(33%), Endurance(5.6%), but subjects majoring Taekwondo showed higher values in Flexibility and Foot Balance. 14. In all male groups, Waist Girth, Scapular Skinfold Thickness, Back Strength, Sargent Jump, Trunk Extension and Diastolic Blood Pressure were showed a significantly related at 0.001 level.

선천성 완전방실차단이 동반된 신생아 루프스 1예

정재현,이은지,이은주,황진원,송영진,최병진,김일환,김종윤,허민영,김동욱 인제대학교 2009 仁濟醫學 Vol.30 No.-

Neonatal lupus is a rare syndrome occurring In neonates with tranplacentally acquired maternal autoantibodies, In particular anti-SSA/Ro-SSB/Ra antibodies. Manifestations include congenital heart block, cutaneous lesions, thrombocytopenia, neutropenia, pulmonary or neurological disease and hepatitis. The non-cardiac manifestations resolve by 6 months of age, congenital heart block is irreversible. We experienced a case of neonatal lupus with congenital complete heart block in a newborn of asyptomatic mother with anti-SSA/Ro-SSB/Ra antibodies.

광주역의 이전방안에 관한 연구

김재국,이진우 東新大學校 工業技術硏究所 2001 工業技術硏究 Vol.7 No.-

Railroad station has changed the urban structure spatially, kept its role as a local point and been used as a means of urban development as the urban central axis. However, as the urban central axis has been shifted due to the external expansion of city and the spatial structure of city has been changed, it has caused a lot of urban problems such as housing difficulty and traffic jam at existing downtown. Therefore the transfer of Gwangju station is urgently required to settle many evils such as traffic jam, frequent traffic accidents, separation of life circle, noise and vibration due to the disconnection of traffic axis through the downtown. Accordingly, it will be desirable that Gwangju station will be transferred in consideration of conforming to balanced urban development of Gwangju city, urban spatial structure and residents convenience.

정지영상 압축을 위한 이진적응에 관한 연구

김향태,위승정,정재영,최호진,최봉한,이웅기 조선대학교 통계연구소 1999 統計硏究所論文誌 Vol.1 No.1

대용량 저장장치의 출현, 컴퓨터 성능 및 초고속 망의 급속한 성장, 디지털 필름스캐너의 성능 향상 및 비용 감소 덕분에 디지털 형태로 영상을 다루기 위한 요구가 점차 증대되는 추세이다. 디지털 영상은 항상 고품질을 유지해야 하므로 화소 당 비트를 높게 할당하는데 이때 소요되는 방대한 비트 수를 효과적으로 감소시켜 저장용량 및 대역폭을 줄이기 위해서는 효율적인 영상 압축이 요구된다. 본 눈문은 디지털 영상의 압축을 위한 새로운 이진적응 방식을 제안한다. 먼저 변환된 예측오류를 얻기 위해 적응예측을 하고, 모델 템플리트로부터 적당한 예측오류 값 영역을 하나의 context영역이 되도록 하는 방식으로 부호화에 적절한 수의 context 영역을 결정한다. 그리고 부호화 효율을 개선하기 위해 개별적인 context 영역에서 부호화 될 예측오류가 나타날 확률을 근접하게 추정한 후, 고 빈도 예측 심볼 집합을 이진적응에 적용하여 부호화의 효율을 개선한다.

ESO 기법을 이용한 외팔보의 신뢰성 기반 위상최적설계

김상락,박재용,이원구,유진식,한석영 한국공작기계학회 2008 한국공작기계학회 춘계학술대회논문집 Vol.2008 No.-

This paper presents a Reliability-Based Topology Optimization (RBTO) using the Evolutionary Structural Optimization (ESO). An actual design involves uncertain conditions such as material property, operational load and dimensional variation. The Deterministic Topology Optimization (DTO) is obtained without considering of uncertainties related to the uncertainty parameters. However, the RBTO can consider the uncertainty variables because it has the probabilistic constraints, In order to determine whether the probabilistic constraint is satisfied or not, simulation techniques and approximation methods are developed, In this paper, the reliability index approach (RIA) is adopted to evaluate the probabilistic constraint, In order to apply the ESO method to the RBTO, a sensitivity number is defined as the change in the reliability index due to the removal of ith element. Numerical examples are presented to compare the DTO with the RBTO.

고분자 튜브 압출성형기의 Braker Plate 구조 개선에 관한 연구

김재열,최진호,박대광 한국공작기계학회 2009 한국공작기계학회 춘계학술대회논문집 Vol.2009 No.-

Many experiments and various simulation techniques are used for the analysises of models used for extrusion modeling in these days. Especially the 3-dimensional technique is used widely among them. We usually use the 3-dimensional technique because the simple 2-dimensional analytical technique can't perform the analysis of the model which has complicated shape structure. As a result, the 3-dimensional technique is used for the extrusion molding of complicated structure, measurement of friction and density, and appiled mechanism of polymer resin. The Braker Plate, key subject of this article, is added to the extruder for extrusion molding of polymer resin. This Braker plate plays the important role to convert the rotation motion of polymer resin passing the screw into the linear motion before passing the dice. Also, Braker Plate's round hole size and number affects the extrusion molding of polymer resin directly. But these Structural improvements and analysises of Braker Plate are hardly studied. This study will achieve the structural improvements through 3-D modeling and ensure the produceable stability by carrying dynamic Characteristic through CFdesign, heat/flow analysis program.

고분자튜브용 Single-Screw 압출시스템의 동적특성 해석

김재열,정효희,최승현,최진호,홍철 한국공작기계학회 2008 한국공작기계학회 추계학술대회논문집 Vol.2008 No.-

Today, Screw model used in extrusion molding of to analyze various simulation notations as well as an experiments use, and is using because among them, third dimension technique among present technique accomplishes most troop. Because that third dimension uses technique does not attain explanation that is correct in model who curt analysis notation on two-dimension has complex shape structure. Is studying measurement of shape of extruder of complicated structure or frictional force of polymer balance and density, applied mechanism accordingly using third dimension technique. Single screw system, analysis target of this treatise, is extruder that extrusion molding that use most polymer resin consists. Most single screw extruder is excellent transfer in melting state of polymer balance, but there are some shortcomings. Melting of polymer balance and color dithering of balance are difficult and high heat of increase of screw speed of revolution to increase done balance quantity produces anaphora along with unmeasured shear force increase. Single screw that have this a lot of controversial points in addition to achieving dynamic analysis of single screw extruder of polymer tube that get into nature of a treatise that use CFdesign that is heat/flow analysis program production stability in single screw extruder system for polymer tube analysis achieve wish to.

ESO 기법을 이용한 신뢰성 기반 최적설계

김상락,박재용,이원구,유진식,한석영 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-

This paper presents a Reliability-Based Topology Optimization (RBTO) using Evolutionary Structural Optimization (ESO). An actual design involves uncertain conditions such as material property, operational load and dimensional variation. Deterministic Topology Optimization (DTO) is obtained without considering of uncertainties related to the uncertainty parameters. However, RBTO involves evaluation of probabilistic constraints, which can be done in two different ways, the reliability index approach (RIA) and the performance measure approach (PMA). Limit state function is approximated using Monte Carlo Simulation and Central Composite Design for reliability analysis. ESO, one of the topology optimization techniques, is adopted for topology optimization. Numerical examples are presented to compare the DTO with RBTO.

수직상향 난류유동시 마찰저항감소에 관한 연구

김재근,이진,차경옥 명지대학교 산업기술연구소 2001 産業技術硏究所論文集 Vol.20 No.-

The drag reduction is the phenomenon that occurs only when the shear stress from the wall of pipe is beyond the critical point. The drag reduction increase as the molecular weight, concentration of the polymer and Reynolds number increase, but it is limited by Virk's maximum drag reduction asymptote. Because of the strong shear force for the polymer on the turbulent flow, the molecular weight and the drag reduction not decrease. Such mechanical degradation of the polymer occurs in all polymer solvent systems. We find that there is no study on vertical-up flow of close system on the drag reduction. Thus, the objectives of this paper is to identify and develop high performance polymer additives for fluid transportations with the benefits of turbulent drag reduction. In addition, we will evaluate the drag reduction in vertical flow by measuring the pressure drop and local void fraction on vertical-up flow of close system.