초등 과학 생명 영역 내용에 대한 학생들의 의문 유형과 해결방법에 관한 연구

임채성,최은아,박정인,이수진 부산교육대학교 과학교육연구소 2004 科學敎育硏究 Vol.29 No.-

In this study, the frequencies and types of questions about LIFE areas of the Science Curriculum of elementary school students were investigated through in-depth interviews with twelve 4th and 5th graders. The results of the research can be summarized as follows: (1) In conjectural question, the proportions of 'object exploration question' and 'object verification question' were high in all of the 4th graders and the students of low achievement level. (2) The numbers of causal questions generated by the 4th graders were much higher than those of the 5th graders. (3) The frequencies of the predictive, methodological, applicative questions were very low both in 4th and 5th grade students. (4) The numbers of conjectural questions were more in all students except the low achievement level of 4th graders at not-yet-taken contents than at already-taken ones. (5) The numbers of causal questions were more in all students except the low and middle achievement levels of 4th graders at not-yet-taken contents than at already-taken ones. (6) The numbers of the predictive, methodological, applicative questions of the 4th graders were more at not-yet-taken contents than at already-taken ones, whereas opposite trend in the 5th graders. (7) The numbers of students' curriculum-related questions were more in all students except the low and middle achievement levels of 4th graders at not-yet-taken contents than at already-taken ones. (8) As ways for solving or seeking answers about questions, the 4th graders suggested methods of consulting experts or teachers (23.9%), internet searching (21.6%), and books or science-related encyclopedia (20.3%), while the 5th graders suggested the internet searching (36.5%), consulting experts or teachers (24.8%), and books or science-related encyclopedia (17.7%). Based an these results, we suggest several ways for improving the question-posing abilities of the students and adequate use of students' questions in the process of science teaching learning.

저작근 공간에서 재발된 치성각화낭

임수연,허경회,이원진,최현배,최순철 대한구강악안면방사선학회 2008 Imaging Science in Dentistry Vol.38 No.2

The odontogenic keratocyst (OKC) is a developmental odontogenic cyst typically occurring in the jaws. Since the first description of OKC was published in 1956, the lesion has been of particular interest because of its specific histopathologic features, high recurrence rate, and aggressive behavior. Recurrences most commonly arise within bone at the site of the original cyst. However, as lining cells may find their way into surrounding tissues either from implantation during surgery or from cortical perforation recurrences may arise at a distance from the original cyst. Here, we report a rare case of recurrent OKC which was first developed in mandible and recurred within the masticatory space.

디지털 제어에 의한 단상유도전동기의 범용 기동기 설계

최창주,서강성,박수강,조금배,백형래,임병옥 조선대학교 에너지.자원신기술연구소 2002 에너지·자원신기술연구소 논문지 Vol.24 No.2

Single phase induction motor(SPIM) is one of the most widely used type of low power AC motors in the world, especially for domestic or commercial applications where a three phase power supply is not available. Fractional horse power single phase induction motors have no starting torque their own. So there are several ways of starting single phase induction motors. The most common type is the starting capacitor installed in series with the auxiliary winding to increase the starting torque. Also, the auxiliary winding is disconnected once the speed of the motor reaches 70 to 80% of the rated speed. In the conventional systems, this function is conducted by a centrifugal switch. But the mechanical centrifugal switch has many problems such as switch malfunction. This paper presents the new methods of universal starting switch by digital controller to overcome these shortcomings of centrifugal switch.

만성두통환자에게 적용한 비약물적 치료가 통증행동에 미치는 영향

최도영,임사비나,차남현,김건식,이재동,김수영,이윤호,이두익 EAST-WEST MEDICAL RESEARCH INSTITUTE KYUNG HEE UNI 2005 東西醫學硏究所 論文集 Vol.2005 No.-

Objectives : This study is a random-controlled post-design for confirmation of headache degree, quality of life, and satisfaction to therapeutical effect on chronic headache adults after management of non-medicinal treatment (acupuncture therapy and stellate ganglion block therapy). Methods : 51 clinical experiment participants were gathered and through a questionnaire patients who experienced headache for more than 4 hours a day and more than 15 days per month were qualified as chronic headache patients. The qualified patients were classified in to two groups, acupuncture group (AT group, n=28) and stellate ganglion block group (SGB group, n=23). Treatment was applied 2 times a weeks for 4 weeks. The effects of both groups were analyzed using VAS scores, BPI (Brief Pain Inventory) and the satisfaction degree to the therapy. Results : 1. The recognized score of the headache of AT group and SGB group was reduced indicating the degree of the headache was released. 2. The recognition at damage to the quality of life was reduced post therapy of AT group and SGB group, in which general activity, mood, enjoyment of life, personal relationship, and sleeping showed significant improvement of life quality. 3. The satisfaction degree to the therapy showed lower score than expectation to it in AT group and SGB group, however, it was not significant. Conclusions : The results showed that the four-week non-medicinal treatment (AT and SGB) in chronic headache patients was effective for reducing headache and releasing its damage in daily life, however, no difference in superiority was found. Therefore, non-medicinal treatment (AT therapy and SGB) could be utilized in chronic headache patients.

기계시각을 이용한 강구 자동 검사장치

김윤수,박수우,임병훈,김태균,최병재,박철영,이문락,도용태 대구대학교 정보통신연구소 2008 情報通信硏究 Vol.5 No.1

Metal balls are commonly used in mechanical elements and systems including bearings. If there is a defect in a metal ball, it can cause a serious machine failure. By this reason every balls produced are required to be inspected, and the inspection is usually done by human eyes. However, the inspection by human eyes is always with the risk of mistakes, and a need to automate the inspection process is arisen. This paper describes a design of an automatic inspection system for detecting defects on ball surface. A machine vision system is used, and design process and techniques are described in detail. 강구는 베어링을 비롯한 기계 요소 및 장치에서 널리 사용되는 부품이다. 만약 강구에 결함이 있을 시, 이를 사용하는 기계에서 치명적인 결함이 초래될 수 있다. 따라서 제조된 강구에 대해서는 전량검사가 요구되고 있고, 검사과정은 사람의 육안에 의한 검사가 주를 이루고 있다. 그런데 사람에 의한 검사에는 항상 실수의 가능성이 있으므로, 이를 자동화하는 것이 필요하다. 본 논문에서는 강구의 표면 결함을 자동적으로 검사할 수 있는 장치를 설계한다. 기계시각 장치가 사용되었고, 설계에 따른 구체적 절차와 기술들이 서술된다.

A Novel Fluid-Reconfigurable Advanced and Delayed Phase Line Using Inkjet-Printed Microfluidic Composite Right/Left-Handed Transmission Line

Sungjin Choi,Wenjing Su,Tentzeris, Manos M.,Sungjoon Lim IEEE 2015 IEEE microwave and wireless components letters Vol.25 No.2

<P>In this letter, a novel fluid-reconfigurable advanced and delayed phase line using a microfluidic composite right/left-handed (CRLH) transmission line (TL) is proposed. A CRLH-TL prototype is inkjet-printed on a photo-paper substrate. In addition, a laser-etched microfluidic channel in poly(methyl methacrylate) (PMMA) is integrated with the CRLH TL using inkjet-printed SU-8 as a bonding material. The proposed TL provides excellent phase-tuning capability that is dependent on the fluidic materials used. As the fluid is changed, the proposed TL can have negative-, zero-, and positive-phase characteristics at 900 MHz for different fluids. The performance of the TL is successfully validated using simulation and measurement results.</P>

전류제어에 의한 단상유도전동기의 기동특성 개선

박수강,최낙일,백형래,임양수,이기용,신사현 조선대학교 에너지.자원신기술연구소 1998 에너지·자원신기술연구소 논문지 Vol.20 No.1

A single phase induction motor(SPIM) with two windings, main and auxiliary, is probably the most widely used motor in the world due to their ruggedness, low maintenance and simplicity of construction There are several ways of starting single phase motors The most popular arrangements is centrifugal switch An auxiliary winding connected in series with a capacitor, is brought into the circuit during starting The closing and opening of the switch must be speed dependant The switch meets the speed requirements, but it also has many drawback random switching, arcing, many models necessary for different speeds and shaft diameters, space required inside the motors and limited lifetime to name some of them. In this paper, the starting current of single phase induction motor was detected by a small detector and determined TRIAC gate signal. The strategy of current control is based on limited main and auxiliary current angle during starting period in the closed-loop control. The experimental result show the motor's starting characteristics of the proposal starting system and are compared with centrifugal switch starting motor.

만성두통 환자의 성격유형 A 행태, 스트레스, 우울 및 두통영향정도의 관계 연구

차남현,임사비나,정인태,김수영,안경애,김건식,이재동,이상훈,최도영,이윤호,이두익 EAST-WEST MEDICAL RESEARCH INSTITUTE KYUNG HEE UNI 2005 東西醫學硏究所 論文集 Vol.2005 No.-

To examine an estimate factor and grasp the relation of difference for Ype A Behavior Pattern(TABP), Perceived Stress Questionnaire. Depression and HIT-6 in the Chronic headache client. Method: Data collected by self-reported questionnaires from 38 client in S city who were selected by criteria of IHS, from the 19^(th) of October to 10^(th) of December, 2004. Result: 1) Differences between biographical data by TABP was significant by SaSang constitutions, by Stress was significantly influenced by age, and by Depression were significantly influenced health status and SaSang constitutions. 2) Correlations Coefficients among Study Variables were Stress and Depression(r=.494, p=.002) and Depression and HIT-6(r=.432, p=.010). 3) In regression analysis, HIT-6 were significantly influenced by Depression and Type A Behavior Pattern(TABP). These variables explained 38% and 34% respectively. Conclusion: The result suggest that chronic headache management with psychological aspect, as well as physical aspect should be a focus to enhance the quality of life.

土壤水分別 播種期와 窒素施肥方法이 율무의 光合成과 生育 및 엽고병에 미치는 影響

金容撤,李忠烈,崔仁洙,朴賢哲,金成萬,林銖三 밀양대학교 농업기술개발연구소 2000 農業技術開發硏究所報 Vol.4 No.1

In order to establish optimal seeding date and nitrogen fertilization of adlay in barley-dlay cropping system of south-eastern part of Korea, yield and its components of adlay grown under at 3 different seeding dates and 2 nitrogen fertilizations were compared and analyzed. In addition, edible nutriants of adlay grain were compared with rice and woheat, between upland and paddy cultivation, and among three cultivars. The results obtained are summarized as follow: 1.Heading date and maturity date was fasted later seeding date than early seeding. Days to heading was decreased as the seeding date was delayed. 2.Stem leagth, stem diameter and No. of tiller were increased irrigation than control(non-irrigation), and was decreased as the seeding date was delayed. 3.Top and root dry weight were increased moisture were decreased irrigation than control(non-irrigation), and was decreased as the seeding date was delayed. 4.Net photosynthetic rate was increased at treatment of irrigation. Key word : adlay, seeding daye, soil water content, photosynthesis, growth.

참외 흰가루병에 대한 살균제의 예방 및 치료효과 검정

장태현,류연주,임혜정,임수진,최미영,정병룡,김철웅,이용세 한국환경농학회 2006 한국환경농학회지 Vol.25 No.1