http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
허유리,손미경,김희중,최한철,정재헌 大韓齒科補綴學會 2012 대한치과보철학회지 Vol.50 No.3
Purpose: This study was conducted to obtain difference in fracture strength according to the diameter of one-body O-ring-type of mini implant fixture, to determine the resistance of mini implant to masticatory pressure, and to examine whether overdenture using O-ring type mini implant is clinically usable to maxillary and mandibular edentulous patients. Materials and methods: For this study, 13 mm long one body O-ring-type mini implants of different diameters (2.0 mm, 2.5 mm and 3.0 mm) (Dentis, Daegu, Korea) were prepared, 5 for each diameter. The sample was placed at 30 from the horizontal surface on the universal testing machine, and off-axis loading was applied until permanent deformation occurred and the load was taken as maximum compressive strength. The mean value of the 5 samples was calculated, and the compressive strength of implant fixture was compared according to diameter. In addition, we prepared 3 samples for each diameter, and applied loading equal to 80%, 60% and 40% of the compressive strength until fracture occurred. Then, we measured the cycle number on fracture and analyzed fatigue fracture for each diameter. Additionally, we measured the cycle number on fracture that occurred when a load of 43 N, which is the average masticatory force of complete denture, was applied. The difference on compressive strength between each group was tested statistically using one-way ANOVA test. Results: Compressive strength according to the diameter of mini implant was 101.5 ± 14.6 N, 149 ± 6.1 N and 276.0 ± 13.4 N, respectively, for diameters 2.0 mm, 2.5 mm and 3.0 mm. In the results of fatigue fracture test at 43 N, fracture did not occur until 2×106 cycles at diameter 2.0 mm, and until 5×106 cycles at 2.5 mm and 3.0 mm. Conclusion: Compressive strength increased significantly with increasing diameter of mini implant. In the results of fatigue fracture test conducted under the average masticatory force of complete denture, fracture did not occur at any of the three diameters. All of the three diameters are usable for supporting overdenture in maxillary and mandibular edentulous patients, but considering that the highest masticatory force of complete denture is 157 N, caution should be used in case diameter 2.0 mm or 2.5 mm is used. 연구 목적: 일체형의 o-ring type 미니 임플란트 고정체의 직경에 따른 파절강도의 차이를 비교하고자 한다. 연구 재료 및 방법: 길이 13 mm의 one body o-ring type의 미니 임플란트(Dentis, Daegu, Korea)를 직경2.0, 2.5, 3.0 mm 각각 5개씩 준비하였다. Instron universal testing machine 에 수직면에서 30도 각도로 샘플을 위치시키고 off-axis loading을 가하여 영구변형이 일어난 하중 값을 파절강도로 하고 5개의 시편의 평균을 구하여 각 직경에 따른 임플란트의 고정체의 파절강도를 비교하였다. 또한, 각 직경마다 3개의 시편을 준비하고 동적하중 피로 시험기를 이용하여, 파절이 발생할 때까지 파절강도의 80%, 60%, 40%의 loading 을 가하여 파절되는 cycle수를 측정하여 각 직경의 피로 파절을 분석하였다. 추가적으로 총의치의 평균 저작력인 43 N의 하중을 가하여 파절되는 cycle 수를 측정하였다. 각 군간의 차이를 검증하기 위해서 일원분산분석(one-way ANOVA test)을 시행하였고, 통계처리는 SPSS ver.12 (SPSS Inc. Chicago, IL, USA) 을 이용하여 실시하였다. 결과: 직경 3.0 mm 의 미니 임플란트는 평균 276.0 ± 13.4 N의 압축력을 받았을 때 영구 변형이 일어났고 직경 2.5 mm 미니 임플란트가 149.0 ± 6.1 N, 2.0 mm 미니 임플란트가 101.5 ± 14.6 N일 때 영구 변형이 일어났다. 각 군간의 파절강도에는 유의한 차이가 있었다(P<.001). 총의치의 평균 저작력 하중에서 실시한 피로 파절 실험 결과, 세직경 모두 5×106 cycle까지 파절이 일어나지 않았다. 결론: 미니 임플란트의 정적 하중 하에서 최대 압축강도는 직경이 증가할수록 유의적으로 증가하였다. 최대 압축강도는 세 직경 모두 총의치의 평균 저작력 보다는 크나 최대 교합력보다는 직경 3.0 mm에서만 크게 나타났다. 총의치의 평균 저작력 하중에서 실시한 피로 파절 실험 결과, 세 직경 모두 파절이 일어나지 않았다.
김정원,박인선,이영준,김유창,김필자,강동묵,이채언 대한산업의학회 2000 대한직업환경의학회지 Vol.12 No.2
Objectives : To report cubital tunnel syndrome due to repetitive motions. Methods : A worker complaining muscle weakness and atrophy of the right hand intrinsic muscles admitted to a hospital. We evaluated him with blood tests, neurophysio-logic studies (NCV & EMG), plain X-ray and US at the both elbows. We investigated his occupational history, and videotaped his work motions based on the work cycle at his previous work site. Finally, an ergonomics expert analyzed the motions using rapid upper limb assessment (RULA). Results : NCV & EMG studies reveals slow conduction velocity on both ulnar nerve across the elbow, more severely in the right side. US shows us compatible finding with diffuse neuritis of both ulnar nerves at both elbows. RULA score is 7. Conclusion : We confirmed that the worker's symptoms were related to his previous jobs demanding repetitive motions using the elbow joints. It is necessary that we should prepare appropriate measures to evaluate, prevent, rehabilitate, and help injured workers to return to work.
Proteomic analysis of the extraembryonic tissue from cloned porcine embryos.
Chae, Jung-Il,Cho, Seong-Keun,Seo, Jung-Woo,Yoon, Tae-Sung,Lee, Kyu-Sun,Kim, Jin-Hoi,Lee, Kyung-Kwang,Han, Yong-Mahn,Yu, Kweon American Society for Biochemistry and Molecular Bi 2006 Molecular and Cellular Proteomics Vol.5 No.9
<P>Cloned animals developed from somatic cell nuclear transfer (SCNT) embryos are useful resources for agricultural and medical applications. However, the birth rate in the cloned animals is very low, and the cloned animals that have survived show various developmental defects. In this report, we present the morphology and differentially regulated proteins in the extraembryonic tissue from SCNT embryos to understand the molecular nature of the tissue. We examined 26-day-old SCNT porcine embryos at which the sonogram can first detect pregnancy. The extraembryonic tissue from SCNT embryos was abnormally small compared with the control. In the proteomic analysis with the SCNT extraembryonic tissue, 39 proteins were identified as differentially regulated proteins. Among up-regulated proteins, Annexins and Hsp27 were found. They are closely related to the processes of apoptosis. Among down-regulated proteins, Peroxiredoxins and anaerobic glycolytic enzymes were identified. In the Western blot analysis, antioxidant enzymes and the antiapoptotic Bcl-2 protein were down-regulated, and caspases were up-regulated. In the terminal deoxynucleotidyltransferase-mediated dUTP nick end labeling (TUNEL) assay with the placenta from SCNT embryos, apoptotic trophoblasts were observed. These results demonstrate that a major reason for the low birth rate of cloned animals is due to abnormal apoptosis in the extraembryonic tissue during early pregnancy.</P>
Auxiliary Switch Control of a Bidirectional Soft-Switching DC/DC Converter
Jung-Hyo Lee,Dong-Ho Yu,Jun-Gu Kim,Young-Ho Kim,Soo-Cheol Shin,Doo-Yong Jung,Yong-Chae Jung,Chung-Yuen Won IEEE 2013 IEEE transactions on power electronics Vol.28 No.12
<P>In this paper, the auxiliary switch control using a lookup table is proposed to enhance the efficiency of the bidirectional dc/dc converter used in electric vehicle, which performs soft switching. Continuous current data are difficult to obtain during a resonant operation due to the limit of DSP ADC capacity. The proposed auxiliary switch control has a lookup table reference of the auxiliary switch turn-on time. The control method properly controls the auxiliary switch turn-on time according to the required load current; this auxiliary switch control brings the more efficient control in generative and regenerative mode operation. The proposed approach has been validated by the results of experiments on a bidirectional dc/dc converter, inverter, and interior permanent magnet synchronous motor.</P>
김정일,김병권,김정원,채창호,이철호,강동묵,김지홍,김진하,김영욱,이영하,이지호,김정호,윤형렬,유철인,정백근,장태원,김운규,윤동영,강진욱,김종은,안진홍,이동준,장준호,이광영,송혜란,최영희,이용환,조병만,최홍렬,고상백,김은아,이유진,홍영습,정갑열,김정만,김준연 大韓産業醫學會 2004 대한직업환경의학회지 Vol.16 No.1
Objective: Occupational medicine specialists in the Busan, Ulsan and Kyung-Nam areas established an area-based occupational disease surveillance system and used this system to collected case information for the purpose of preventing occupational diseases Methods: l l hospital participated in this system. The authors selected five main diseases, which were hand-arm vibration syndrome (HAVS), work-related musculoskeletal disorder (WRMSD), occupational asthma, occupational skin disease and occupational and occupational lung cancer and established their case definitions. All cases were reported on the web, and real time analysis was conducted. Results: Between April 2001 and April 2003, 192 cases of HAVS, 118 cases of WRMSD, 33 cases of occupational asthma, 17 cases of occupational skin disease and 17 cases of occupational lung cancer (for a total of 377 cases of these five main diseases) were reported. most of the HAVS cases came from shipbuilding, and 172 of them (92.7%) were associated with grinding. Of the four main types of WRMSD, carpal tunnel syndrome (CTS) was the most prevalent with 46 cases and shipbuilding was also the main industry involved (83.9%). The ergonomic risk factors involved mainly associated with the hand. In 19 (57.6%) and 4 (12.1%) cases of occupational asthma, the agents involved. The causative agents of occupational lung cancer included Cr, welding fume, PAH, Ni, etc. 10(58.8%) of the cases were diagnosed as squamous cell carcinoma and 5(29.4%) as adenoma. Conclusion: This result showed that an area-based occupational disease surveillance system might provide an effective method of evaluating the prevalence of such diseases, however the Busan, Ulsan and Kyung-Nam provinces are too large to be treated as individual areas. Therefore, the authors suggest that each province should establish its own surveillance system.