현대문학 : 이청준의 「매잡이」연구 -랜서의 시점이론을 중심으로

이성희 ( Sung Hee Lee ) 문창어문학회 1999 문창어문논집 Vol.36 No.-

The purpose of this subject is to prove Lee tried to describe that the point of view concerns not only how to express, based on Lancer`s theory, but also how the author illustrates his theme. Lancer`s theory explains that the point of view, although it is a matter of expression, is influenced by author`s ideology. In 「Hawker」, the hero Tae-joon Min incarnates Lee`s ideology, formulating the main stream. Lee`s intention to stay away from readers is ultimately premised on his own authorization. This is why I selected 「Hawker」 to clarify Lee`s authorization and the conclusion is as follows. Lancer`s theory implies the structure of narrative, point of view and the authorization are on the same boat. I studied how the implication reflects the authorization through the structure-point analysis.

소아의 단순성 비만증에 의한 지방간의 진단: ALT치와 복부 전산화단층촬영 및 간생검 소견간의 상관관계

이성희,김화중,오재철,한혜정,김희섭,차한,박호진,신미경,이민진,이상천,Lee, Seong-Hee,Kim, Hwa-Jung,Oh, Jae-Cheol,Han, Hae-Jeong,Kim, Hee-Sup,Tchah, Hann,Park, Ho-Jin,Shin, Mi-Keong,Lee, Min-Jin,Lee, Sang-Chun 대한소아소화기영양학회 1999 Pediatric gastroenterology, hepatology & nutrition Vol.2 No.2

목 적: 소아비만의 중요한 합병증 중 하나인 지방간을 진단함에 있어 ALT치와 CT 및 간생검 소견간의 상관관계를 살펴봄으로써, 선별검사로서 ALT치의 유용성과 확진검사로서 CT 및 간생검의 필요성을 알아보고자 한다. 대상 및 방법: 1990년 3월부터 1997년 12월까지 서울적십자병원 소아과에 내원하여 단순비만으로 진단 받은 78명 중 지방간 진단을 위해 CT를 실시한 26명을 대상으로 하였으며, 생화학검사 중 지방간의 선별검사로서 보다 특이성이 높은 ALT치가 지나치게 높거나 비만도가 심한 비만아들 중 15례에서 간생검을 실시하였다. 이들을 ALT치에 따라 3개 군으로 분류하고 각 군별로 신체계측지수, CT 및 간생검상 지방침착도 간의 상관관계를 비교 분석하였다. 결 과: 1) ALT치와 신체계측지수간의 상관관계: 대상 비만아 26례 중 ALT치는 17례(63.4%)에서 이상 상승(>30 IU/L)되었으나, ALT치의 상승과 신체계측지수들(비만도, RI, BMI, 체지방률) 간에는 유의한 상관관계가 없었다(p>0.05) 2) CT상 지방침착도와 ALT치 및 신체계측지수 간의 상관관계: 26례 중 13례(50%)에서 CT상 정상이었고, 나머지 13례는 정도의 차이는 있으나 모두 간음영이 증가된 지방간 소견을 보였다. CT상 지방간의 정도와 ALT치의 상승간에는 유의한 상관관계가 있었으나(p=0.01), 신체계측지수와는 유의한 상관관계가 없었다(p>0.05). 3) 간 생검상 지방간의 정도와 비만도, ALT치와의 상관관계: 26례 중 15례에서 간 생검을 실시한 결과, 1례에서 정상이었고 나머지 14례에서 모두 지방간 소견을 보였다. 그러나 간 생검상 정상인 1례는 고도비만이었으나 ALT치는 정상치였고, 중등도의 지방간 소견 보인 3례 중 1례는 고도비만이었음에도 ALT치는 정상이었으며 2례는 ALT치가 정상이거나 약간 증가하였으며, 심한 지방간 소견 보인 9례 중 1례는 경한 비만이었으나 ALT는 158 IU/L로 심한 상승을 보였다. 간 생검상 지방간인 14례를 지방침착도에 따라 3개 군으로 분류하여 비만도와 ALT치를 비교분석한 결과 비만도와 간 생검 소견간에는 유의한 차이가 없었으나(p>0.05), ALT치와 간 생검상 지방간의 정도간에는 유의한 차이가 있었다(p=0.01). 4) CT와 간 생검 소견간의 상관관계: 26례 중 15례에서 CT와 간 생검 모두를 시행한 결과, CT상 6례는 정상이었고, CT상 지방간 소견 보인 9례에서는 간의 지방침착도에 따른 음영의 변화를 기준으로 한 CT소견과 간 생검상 지방침착도간에 유의한 상관관계를 보였다(r=0.6094). 결 론: 최근 소아비만이 급증 추세에 있고 그에 따른 여러 가지 합병증들은 물론 성인비만으로 이행될 수 있으므로 학교보건 등을 통해 경각심을 높이도록 해야 하며, 특히 비만에 따른 지방간을 진단하기 위한 선별검사인 ALT치 등 생화학적인 간 기능 검사로는 간 손상 정도를 평가할 수 없기 때문에 보다 저비용이며 비침습적인 초음파검사를 적극 활용토록 하고 선별검사 등으로 선정된 고위험군에 대해서는 간 생검을 통해 간 손상 정도를 정확히 평가하고 지속적으로 추적 관리해야 할 것이다. Purpose: The purpose of our study is to provide useful information for diagnostic methods of fatty liver by childhood simple obesity and to provide correlation between serum alanine aminotransferase (ALT) for screening test and abdominal computerized tomography (CT) and liver biopsy for confirmative diagnostic methods of fatty liver. Methods: Among 78 obese childrens who visited our hospital, CT was carried out in 26 childrens. Of these, liver biopsy was carried out in 15 childrens who had high obesity index or severe elevated ALT. Based on the level of serum ALT, 26 cases were classified into 3 groups, and compared with physical measurements and degree of fatty infiltration on CT and liver biopsy. Results: 1) Correlation between ALT and physical measurements: Of 26 obese children, ALT was abnormally elevated (>30 IU/L) in 17 cases (67.4%) but there was no significant correlation between ALT and physical measurements (p>0.05). 2) Correlation between degree of fatty infiltration on CT and ALT: Of 26 cases, 13 cases (50%) revealed fatty liver on CT. The degree of fatty liver on CT had significant correlation with elevation of ALT (p<0.05). 3) Correlation between the degree of fatty infiltration on liver biopsy and ALT: Liver biopsy was performed in 15 cases of which 14 cases revealed fatty liver. But one case had normal hepatic histology with severe obesity and normal ALT. Fourteen fatty liver cases on liver biopsy were classified into 3 groups by the degree of fatty infiltration and analysed with obesity index and ALT. The histologic hepatic steatosis had no significant correlation with obesity index (p>0.05), but significant correlation with ALT (p<0.05). 4) Correlation between CT and liver biopsy finding: Both CT and liver biopsy were performed in 15 cases of which 6 cases revealed normal finding on CT and 9 cases manifested fatty liver. There was significant correlation between CT and liver biopsy findings (r=0.6094). Conclusion: The results of our study suggest that abdominal CT and liver biopsy are useful and accurate methods of estimating fatty liver in the childhood obesity. But biochemical abnormalities of routine liver function tests dot not correlate well with severity of the fatty liver and liver injury.

Special Report - 비정형 스크린 디지털 사이니지 기술

이성희,신일홍,이남경,이현우,Lee, Seong-Hui,Sin, Il-Hong,Lee, Nam-Gyeong,Lee, Hyeon-U 한국정보통신기술협회 2017 TTA저널 Vol.170 No.-

현장진단용 단백질 칩 사출금형기술

이성희,고영배,이종원,정해철,박재현,이옥성,Lee, Sung-Hee,Ko, Young-Bae,Lee, Jong-Won,Jung, Hae-Chul,Park, Jae-Hyun,Lee, Ok-Sung 한국금형공학회 2012 한국금형공학회지 Vol.6 No.2

A multi-cavity injection mold system of protein chip for point-of-care with cavity temperature and pressure sensors was proposed in this work. In advance of manufacturing for the multi-cavity injection mold system, a single cavity injection mold system to mold protein chip was considered. Injection molding analysis for the presented system was performed to optimize the process of the molding and suggest guides to design. On the basis of the results for the single cavity system, a multi-cavity injection mold system for protein chip was analyzed, designed and manufactured with cavity temperature and pressure sensors. Results of balanced filling for protein chip models were obtained from the presented mold system.

세 명의 대한민국 제 V형 당원축적근육병(McArdle 병) 환자들의 유전학적 및 임상적 특성 보고

이성희,강은구,김윤명,이범희,김구환,유한욱,Lee, Sunghee,Kang, Eungu,Kim, Yoonmyung,Lee, Beom Hee,Kim, Gu Hwan,Yoo, Han Wook 대한유전성대사질환학회 2016 대한유전성대사질환학회지 Vol.16 No.2

목적: McArdle 병은 당원분해의 주요 속도 조절 단계인 당원인산화의 장애로 운동 초기에 적절한 에너지 공급이 이루어지지 않아 운동내성 및 근력약화가 발생하는 상염색체 열성 근육병으로, 저자의 관점 하에 현재까지 보고된 대한민국 McArdle 병은 4례로, 본 논문은 대한민국 McArdle 병 환자를 추가 보고하고 이들의 임상증상 및 유전학적 변이를 밝히고자 한다. 방법: 2006년부터 2011년까지 임상증상과 일반 혈액 및 생화학 검사, 그리고 PYGM 유전자 검사로 확진된 총 3명의 McArdle 병 환자의 전자 차트를 후향적으로 검토하여, 검사 소견, 시행된 운동요법과 약물치료, 그리고 예후를 확인하였다. 돌연변이 분석은 말초 혈액에서 분리한 DNA에서 genomic DNA를 분리하고, primer를이용해PYGM의 20개 exon과 intronic flanking 배열을 증폭한 후 전기영동으로 DNA 염기서열을 분석하였다. 결과: 세 증례의 증상 발생 평균 연령은 $10.33{\pm}4.73$ 세로, 공통적으로 심한 근육통, 근육부종을 동반한 잦은 횡문근융해증, 높은 기저 혈청 크레아틴키나아제과 마이오글로빈 농도, 뚜렷하지 않은 second wind phenomenon을 보였다. 근육생검 결과, 증례 1은 정상소견을 보였으나, 증례 2는 subsarcolemmal 공간 내 당원침착과 적색열의 퇴행 및 괴사, 증례 3은 periodic acid Schiff stain에 염색되는 물질을 갖는 공포와 내핵을 포함한 근섬유 소견을 보여 당원축적증에 합당한 양상을 보였다. 결론: PYGM 염기서열 분석 결과에서는 증례 1에서 $p.Arg50^*$;p.Trp798Arg, 증례 2에서 $p.Arg50^*$;p.Glu779 del, 증례 3에서 $p.Asp511Thrfs^*28$;p.Phe710 del 복합 이형 접합자 돌연변이를 보였다. Purpose: McArdle disease, glycogen storage disease type V (GSD V), is one of the most common adolescent-onset glycogen storage diseases. It is caused by recessive mutations in PYGM encoding myophosphorylase, which is critical to glycogen metabolism. Since only a few korean patients have been reported, we will observe the clinical and genetic features of three korean patients with McArdle disease. Methods: We retrospectively reviewed the medical records of three patients with genetically confirmed McArdle disease, including the results of forearm ischemic exercise test, electromyogram, nerve conduction velocity, muscle biopsy, and PYGM analysis in peripheral leukocytes. Results: All three cases were males and their age of symptom onset was 12, 5, 14 years old, respectively. A high basal level of serum creatine kinase was noted in all three patients. They experienced the recurrent episodes of rhabdomyolysis, but second wind phenomenon was not definite. In muscle biopsy, subsarcolemmal space vacuoles including periodic acid schiff stained materials were found in two patients, while no evidence of glycogen storage disease was found in the other. A total of five different mutations, $p.Arg50^*$, p.Trp798Arg, $p.Arg50^*$, p.Glu779del, $p.Asp511Thrfs^*28$ and p.Phe710del, were found in three patients. Avoidance of isometric exercise, aerobic exercise and glucose intake before each exercise were recommended for all patients. Conclusion: The three Korean patients with McArdle disease showed the typical manifestations of the condition. The most mutations were private. Therefore, identification of more cases with long-term follow-up will be required to understand the clinical and genetic features of this disease among Korean population.

초박판 사출성형특성 분석을 위한 금형제작에 관한 연구

이성희,고영배,이종원,김성규,양진석,허영무,Lee, Sung-Hee,Ko, Young-Bae,Lee, Jong-Won,Kim, Sung-Kyu,Yang, Jin-Suk,Heo, Young-Moo 한국금형공학회 2008 한국금형공학회지 Vol.2 No.5

A micro-injection mold for ultra-thin-walled plate was considered in this work. The proposed mold system is for the fabrication of ultra-thin walled plastic plate with micro features by injection molding. As the injection molding of thin-walled plastic, which has the thickness under $400{\mu}m$, itself is not easy, the injection molding of the micro-features in the thin-walled structure is more complicated and difficult. To investigate the basic phenomenon of the ultra-thin walled part during the injection molding process, design of the part and mold system were performed in the present study. The injection molding and structural analysis of the suggested part and mold system were also performed. Consequently, injection molding system for ultra-thin walled plate with micro features were manufactured and presented.

ARB법에 의한 Cu-Fe-P합금의 초미세결정립 형성

이성희,한승전,김형욱,임차용,Lee, Seong-Hee,Han, Seung-Zeon,Kim, Hyoung-Wook,Lim, Cha-Yong 한국재료학회 2009 한국재료학회지 Vol.19 No.8

A Cu-Fe-P copper alloy was processed by accumulative roll-bonding (ARB) for ultra grain refinement and high strengthening. Two 1mm thick copper sheets, 30 mm wide and 300 mm long, were first degreased and wire-brushed for sound bonding. The sheets were then stacked on top of each other and roll-bonded by about 50% reduction rolling without lubrication at ambient temperature. The bonded sheet was then cut into two pieces of the same dimensions and the same procedure was repeated for the sheets up to eight cycles. Microstructural evolution of the copper alloy with the number of the ARB cycles was investigated by optical microscopy (OM), transmission electron microscopy(TEM), and electron back scatter diffraction(EBSD). The grain size decreased gradually with the number of ARB cycles, and was reduced to 290 nm after eight cycles. The boundaries above 60% of ultrafine grains formed exhibited high angle boundaries above 15 degrees. In addition, the average misorientation angle of ultrafine grains was 30 degrees.

토양 중 PBDEs와 PCBs의 농도분포

이성희,조기철,여현구,Lee, Sung-Hee,Cho, Ki-Chul,Yeo, Hyun-Gu 한국환경보건학회 2009 한국환경보건학회지 Vol.35 No.6

Polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) were measured in soil samples of Ansung in Kyonggi-province to investigate concentration distribution of PBDEs and PCBs. The 10 soil samples were collected using a stainless steel hand-held corer that was cleaned before and after each sample using hexane. Total concentration of PBDE and PCBs were 2,205.3 and 348.1 pg/g dry weight (DW) in soil sample, respectively. BDE-209 showed as the most abundant congener in soil samples which was related to imported amount and usage amount of deca-BDE technical mixture in Korea. Also, BDE-99, BDE-47, BDE-100 deposition in soil sample was higher than other congeners and was related to the imported and usage amount reported for penta-BDE technical mixture in Korea. Correlation coefficient between PBDE contribution and technical mixture formulation (Bromokal 70-5DE) were significant (r=0.91, p<0.01) which suggests the influence of sources in this technical mixtures.

엔드플레이트 항복형 보-기둥 접합부의 구조특성에 관한 실험적 연구

이성희,이세정,양일승,김진호,최성모,Lee, Seong-Hui,Lee, Se Jung,Yang, Il Seung,Kim, Jin Ho,Choi, Sung Mo 한국강구조학회 2009 韓國鋼構造學會 論文集 Vol.21 No.6

엔드플레이트 접합부는 보의 단부에 엔드플레이트를 공장 용접하여 현장에서 볼트로 체결하는 접합법이다. 이 접합부는 유럽, 미국 등 선진국에서 일반적으로 이용되는 접합부로서 Eurocode 3, AISC LRFD, FEMA 350등에서 그 설계법과 접합상세를 제시하고 있다. 우리나라는 최근 미국의 IBC 2000을 근간으로 KBC 2005의 내진설계 기준을 강화하였고, 향후 제정될 보-기둥 접합부의 설계 기준도 미국의 접합상세가 도입될 것으로 예상된다. 미국의 엔드플레이트 접합상세는 보 파괴형을 유도하기 위하여 두꺼운 엔드플레이트를 사용하기 때문에 국내 적용은 사실상 과다설계의 문제점이 있다. 따라서 본 연구에서는 국내 실정에 적합한 End-Plate 접합부를 제시하기 위하여 미국의 FEMA-350에서 제시하고 있는 End-Plate 접합부 설계기준을 분석하여 엔드플레이트 항복형의 유도와 Shim Plate 유무에 따른 접합부 거동, 접합부의 형상에 따른 거동을 변수로 총 6개의 실험체를 제작하여 구조실험을 수행하고 내진성능을 평가하였다. In the construction of end-plate connections, the end-plate is welded to the end of the beam in a factory and fastened by bolts in the field. This connection is widely used in advanced countries such as European countries and the U.S. Its design and connection details are prescribed in Eurocode 3, AISC LRFD, and FEMA 350. In Korea, the standards for seismic design in KBC 2005 have been reinforced based on IBC 2000 in the U.S., and it is expected that the connection details in the U.S. will be adopted for the establishment of beam-to-column design standards. In the U.S. thick end-plates are used for the connections to prevent beam rupture. The use of the connections in Korea, however, may lead toover-design. In this experimental study, the design standards for the end-plate connections provided by FEMA-350 were analyzed and structural tests for six specimens were conducted with the variables being the shim plate and the connection shape, to provide the best specifications for connections with plastic deformation in the end-plate for use in Korea.

6층겹침ARB공정에 의해 강소성가공된 극저탄소IF강의 어닐링에 따른 미세조직 변화

이성희,Lee, Seong-Hee 한국재료학회 2012 한국재료학회지 Vol.22 No.8

A sample of ultra low carbon IF steel was processed by six-layer stack accumulative roll-bonding (ARB) and annealed. The ARB was conducted at ambient temperature after deforming the as-received material to a thickness of 0.5 mm by 50% cold rolling. The ARB was performed for a six-layer stacked, i.e. a 3 mm thick sheet, up to 3 cycles (an equivalent strain of ~7.0). In each ARB cycle, the stacked sheets were, first, deformed to 1.5 mm thickness by 50% rolling and then reduced to 0.5 mm thickness, as the starting thickness, by multi-pass rolling without lubrication. The specimen after 3 cycles was then annealed for 0.5 h at various temperatures ranging from 673 to 973 K. The microstructural evolution with the annealing temperature for the 3-cycle ARB processed IF steel was investigated in detail by transmission electron microscopy observation. The ARB processed IF steel exhibited mainly a dislocation cell lamella structure with relatively high dislocation density in which the subgrains were partially observed. The selected area diffraction (SAD) patterns suggested that the misorientation between neighboring cells or subgrains was very small. The thickness of the grains increased in a gradual way up to 873 K, but above 898 K it increased drastically. As a result, the grains came to have an equiaxed morphology at 898 K, in which the width and the thickness of the grains were almost identical. The grain growth occurred actively at temperatures above 923 K.