노인세대를 위한 주택제도 개선방안에 관한 연구

허동윤,최창환 東亞大學校 建設技術硏究所 2001 硏究論文集 Vol.25 No.2

Making of our country to aged progresses at a very high speed compared with other country it and an increase in the population of the aged person gives the society a lot of problems. Especially, a great expansion of the environment of physical and the recognition conversion of the society are demanded. Be as follows when the system method for the aged housing which is the result is 1. It is a presentation of the necessity of a legal definition in the aged housing for the aged household. 2. The device, by which the system maintenance and the control ability to the popularization of the aged housing are supported, is straightened. 3. To make the aged housing which various house can share, it should devise the design models such as barrier free design and universal design.

지하철의 사상사고 및 운전장애 분석에 관한 연구

이동훈,목연수,장성록,권혁무,윤원영,옥영석,최용석,배동철 한국산업안전학회 1999 한국안전학회지 Vol.14 No.3

The purpose of this study is to analyze death injuries and operation troubles of urban transit. No difference was shown in death rates between Line 1 of Pusan urban transit and Line 5, 7, and 8 of Seoul metropolitan transit. And relief time by another train did not depend upon the number of crews. We concluded that thorough inspection and preventive maintenance of trains and facilities are necessary for safe and timely service of urban transit.

Semi - continuous Culture 방법을 이용한 Condensed Tannin 의 한국재래산양 반추위 섬유소 분해 미생물의 활성에 미치는 영향

배귀석,이상석,최종원,박상엽,장문백,하종규,최일,배희동,김종민 한국낙농학회 1999 韓國酪農學會誌 Vol.21 No.2

성인에서 발견된 십이지장 막양구조

박경규,박형근,김연수,이문성,김진오,조영덕,이영홍,봉형근,조주영,이준성,심찬섭,황성규,함정식,장재영,권귀향 대한내과학회 1997 대한내과학회지 Vol.53 No.2

Duodenal obstruction is the third leading cause of intrinsic obstruction of the alimentary tract in the newborn, the other causes are imperforate anus and esophageal atresia. If the obstruction is incomplete, as with a fenestrated duodenal membrane, the presentation of the symptoms may be delayed and the diagnosis overlooked. And so they are rarely diagnosed in the adult. Diagnosis can be made by contrast duodenography but is more definitive with endoscopy. This is the first case report of a 21-year-old female with duodenal membrane, associated with incomplete rotation of intestine and uterus bicornis, diagnosed by hypotonic duodenography and endoscopy, preoperatively, and successfully treated with duodenoduodenostomy.

Zn-0.3wt.% Al 합금의 초소성 변형에 따른 미세조직의 변화

이원절,박찬경,하태권,손중락,장영원 대한금속재료학회(대한금속학회) 1998 대한금속·재료학회지 Vol.36 No.9

The superplastic deformation of Zn-0.3wt.%Al alloys were investigated at room temperature under various strain rate. These alloys were highly elongated up to 1400% at the initial strain rate of 2×10^(-4)/s, revealing the rate sensitivity parameter of about 0.4. In order to investigate the microstructural change during superplastic deformation, the transmission electron microscopy(TEM) studies were performed on the specimen elongated up to the 100% tensile strain at various strain rate. The microstructure was composed of zinc rich matrix phase, with 1㎛ in grain size, and Al rich second phases precipitated generally at grain boundaries and/or triple point. In region III(5×10^(-2)/s), the high density of dislocations were observed within the grains and deformation twins were also formed within the grains. In region II(2^*10^(-4)/s), however, the dislocations were highly localized along the grain boundaries and deformation twins were not observed. Observation of severe deformation along the grain boundaries and grain boundary migration(GBM) suggest that grain boundary sliding(GBS) is a dominant mechanism of superplastic deformation in this alloy.

순 AI 과 순 Cu 의 진동 특성에 미치는 시편 크기의 영향

장충근,권혁무,박헌범 대한금속재료학회(대한금속학회) 2001 대한금속·재료학회지 Vol.39 No.4

The vibration properties of the pure Al plate and pure Cu plate, 12 ㎜ wide and 164∼254 ㎜ long, were investigated by cantilever beam and RFDA to get the following results. (1) The results by cantilever beam method and RFDA show that the resonance frequency decreases as the specimen length increases or the thickness decreases. (2) When measuring the vibration by the cantilever beam method, the vibration damping coefficients are stable at the specimen with 184 ㎜ or higher length. (3) When measuring the vibration damping coefficient by the cantilever beam method, the mean vibration damping ratio of Al specimen 1.6∼0.8 ㎜ thick is 3.1×10^(-2) and 4.0×10^(-2) in Cu specimen of 2.0∼1.2 ㎜ (4) When measuring the vibration damping properties by the RFDA, vibration damping coefficients are similar regardless of the length and thickness of a specimen and the mean vibration damping ratios of Al and Cu were 2.1×10^(-2) and 2.7×10^(-2), respectively. (5) As a result of (3) and (4), The relationship, between the vibration damping ratio measured by the cantilever beam method and it by the RFDA was founded as g_s=(δ_o/δ_r)×(1/1.5).

조선업 협력업체의 안전관리 모델에 관한 연구

이동훈,목연수,장성록,고성석 한국산업안전학회 1999 한국안전학회지 Vol.14 No.1

Due to the work characteristics of shipyard industry, subcontractors are essential and employees of them consist of 25% of the total employee. Problems of their safety management are as follows; - obscurity of safety management responsibility - flimsiness of subcontractor's safety awareness - absence of ability to develop safety techniques and to provide safety equipments - lack of opportunity of safety education The purpose of this study is modelling safety management system of shipyard industry subcontractors to reduce industrial accidents by employees of subcontractors. A phased model contained organization and work responsibility of related departments, safety management planning and evaluation system, safe work supporting system, safety education supporting system.

구속전단가공법 (ECAP) 에서 전단변형 특성

문인기,고흥석,장준연,최성규 대한금속재료학회(대한금속학회) 1999 대한금속·재료학회지 Vol.37 No.4

The study focuses on the basic deformation mechanism of ECAP (Equal Channel Angular Pressing) which gives a large shear deformation without change in the reduction of area. A model deformation in which a plasticine is pressed through a transparent die shows a typical shear deformation in detail. ECAP was performed on a commercial pure aluminum and an Al-7%Si alloy in order to investigate the change in the microstructure after ECAP. Friction force between specimen and die acts to prevent uniform shear deformation of a specimen. ECAP significantly reduces grain size of both aluminum alloys below the order of micronmeter by giving a large shear deformation, which provides a new method for grain refinement. A drastic increase in the yield strength combined with a small increase in the strain hardening is observed in both ECA pressed aluminum alloys. The ECAP is believed to be very effective in the grain refinement.

구속전단가공 (ECAP) 한 Al 합금의 미세조직

문인기,고흥석,장준연,최성규 대한금속재료학회(대한금속학회) 1999 대한금속·재료학회지 Vol.37 No.12

The study is an attempt to understand the basic characteristics of ECAP(Equal Channel Angular Pressing) which gives large shear deformation without any change in the dimension of material. Microstructure comparison was performed between pure Al and Al-7 wt% Si alloys after the ECAP. Emphasis was put on the microstructural change of Al-Si alloys consisting of two phase (primary Al + eutectic Si) where eutectic Si appears different shape and size depending on the modification. The pressing leads to the development of subgrain bands of Al and the fracture of unmodified eutectic Si. The eutectic Si may form dislocation tangles by acting as an obstacle to movement of dislocation, which can be proved with the location of eutectic Si on recrystallized grain boundary. It is obvious that ECAP results in a fine grain structure in Al-Si alloy without decohesion between Al matrix and eutectic Si.

청국장의 제조방법과 이용실태에 관한 조사연구

김태영,김진숙,장창문,신선영,유선미,최정숙,박홍주 한국콩연구회 1996 韓國콩硏究會誌 Vol.13 No.2

The preparation method for traditional Chung-Kuk-Jang at home was surveyed by 241 housewives through the country using premade questionnaires. The 84.2% of total respondents prepared Chung-Kuk-Jang at home, mostly from October to December (95.5%), once or twice per year (71.9%). Soybean for Chung-Kuk-Jang had a relatively large grain size, and average soaking and boiling time were 5.8 hr and 3.6 hr, respectively. Only 31% of respondents used rice straw for Chung-Kuk-Jang fermentation and 90% of respondents fermented Chung-Kuk-Jang in the Korean under-door heating system for 3 days (53.2%) or 2 days (20.2%). Average subsidiary ingredients for Chung-Kuk-Jang making were salt (8.5%), garlic(2.2%), redpepper-powder (0.2%). After mixing all ingredients, Chuag-Kuk-Jang in clay pot was kept in a cool place (38.4%) or refrigerator (38.4%). The 58.5% of total respondents had experience of purchasing commercial Chung-Kuk-Jang, mostly is the market (51.1%) or supermarket (40.4%) and the respondents, who were low-aged or high - educational level or live in apartment purchased the commercial products more often than the others. The reasons for purchasing commercial products were convenience (40.4%), short of time(34%) and the criteria for purchasing were odor (34.8%) and taste by previous experience (28.4%). Respondents preferred vinyl packing (83.7%) and 300g pack (52.5%) for. single usage. The 45.4% of respondents were not satisfied with the commercial products and the reason for dissatisfaction was inferior taste (56.3%), especially without taste peculiar to the Chung-Kuk-Jang. The necessities for improving quality of Chung-Kuk-Jang were to mask off - flavour (52.3%) and to preserve deterioration (30.7%).