http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Electropulsing Treatment on Enhancement of Electrical Conductivity of Screen-Printed Ag Wire
Ju‑Won Park,Howook Choi,Hwangsun Kim,Simoon Sung,Hye‑Jin Jeong,Il Kim,Jaeseok Gong,Sung‑Tae Hong,Heung Nam Han 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.5
The effect of high electric current density on the sintering of Ag wires manufactured by screen printing is evaluated throughelectrical resistivity analysis and microstructure observation. Different forms (continuous and pulsed) of electric currentwith different current densities are applied to the specimens. Conventional heat treatment is also performed as a controlgroup to examine the athermal effect of electropulsing treatment. Compared to the conventional heat treatment, the resistivityis reduced more under the electropulsing treatment with continuous current for the same temperature and treatment time.Also, the process time of electropulsing treatment can be reduced by applying a pulse form of high density current insteadof continuous current without losing the benefit of enhanced reduction of resistivity. The microstructural observationsobtained from high angle annular dark field scanning transmission electron microscope and a digital precession instrumentclearly show that necking connecting the crystals is formed more firmly under electric current. In addition, the temperaturechange of Ag wire and substrate is calculated according to the change of the resistivity when the electric current is appliedto confirm the reliability.
Jeong‑Han Lee,Ik‑Hyun Oh,Jun‑Ho Jang,Ju‑Hun Kim,Sung‑Kil Hong,Hyun‑Kuk Park 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.5
In this study, Al, Cr and Si fine powders were alloyed by planetary ball milling to investigate their microstructural evolution,following their mechanical alloying behavior. The formation of Al(Cr) supersaturated solid solution by the Cr grainsembedded in Al-matrix, which contributed substitutional structure is discussed in relation to their structural evolution inaccordance with the distortion of a crystal lattice. The compacts of Al–Cr–Si alloys were prepared by rapid sintering withina short time by dense consolidation above the density of 99.9% as the formation of intermetallics, except in the case of thedistribution of single-phases induced by the Al-melting. The formation behavior of intermetallics was dominated by dependenceon the structures of the milled-powder and subsequent sintering temperature. To estimate the consolidated behaviorsof compacts, various approaches derived from TEM and XRD analysis were taken to obtain microstructural evidences ofthe inter-diffusion, following the presence of thermally stable intermetallics.
Jeong‑Ju Yoo,Hyeon Jeong Cho 한국의류학회 2018 Fashion and Textiles Vol.5 No.1
The goal of this study is to test the antecedents of overall attitudes toward sunless tanning product use. The data collected from 302 US female college students with an average age of 20.11 were included in the analysis. A structural equation modeling was performed to test the hypothesized relationships. The results revealed that body surveillance and social ostracism influenced the individuals’ cutaneous body image dissatisfaction, which also influenced perceived attractiveness and fitness of tanned appearance. Perceived tanning attractiveness and perceived tanning physical fitness positively influences attitudes toward tanning product use. It is evident that seeing one’s own body through the lens of others is at the root of positive attitudes toward sunless tanning products. Positive attitudinal changes toward sunless tanning products can be successfully established emphasizing sunless tanning products as fashion consumption. The findings in this study have important relevance, in that tanning products can be marketed as cosmetic appearance-enhancement products for people to look attractive, toned, and fit.
Jeong‑Han Lee,Ik‑Hyun Oh,Ju‑Hun Kim,Sung‑Kil Hong,Hyun‑Kuk Park 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.9
Densely consolidated WC-based hard materials with 5–20 vol% ZrSiO4was fabricated by spark plasma sintering at 1400 ℃ ata constant heating rate of 70 ℃/min−1. To achieve mechanical alloying of WC-ZrSiO4, planetary ball milling was carried outfor 12 h, during which the brittle-brittle components (WC-ZrSiO4) became fragmented and their particles became refined. Itwas observed that certain, specific, non-isothermal sintering kinetics, such as apparent activation energy, sintering exponents,and densification strain, affected the densification behavior. The evolution of phase structure from powder to compact wasfound to be related the lattice distortion and micro-strain in the basal planes of WC. By examining the mechanical propertiesof the samples, it was that the added zircon content leads to enhanced fracture toughness (12.9 MPa m1/2) owing to thepresence of WC-ZrSiO4 in the cemented carbide. In fact, the microcrack propagation of the fracture passed through zirconfrom a transgranular to a ductile component (fcc) where the crack tips could be absorbed.
Jeong‑Han Lee,Ik‑Hyun Oh,Jun‑Ho Jang,Ju‑Hun Kim,Sung‑Kil Hong,Hyun‑Kuk Park 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.3
The aim of this study is to investigate the structural evolution and mechanical properties of TiAlSiN coatings when processedby the arc ion plating method. To form a hard coating, Ti, Al, and Si powders were mechanically alloyed by planetary ballmilling; the powders were then densely compacted during a rapid sintering process into a ternary system coating, i.e. TiAlSi. The evolution of the structural phase from a powder to a compact material is dominated considerably by phase states suchas a supersaturated solid solution or intermetallic compounds. In the case of coating layers, the factors that determine thestructural evolution are associated with the phase stability of the nano-crystalline structure that in turn is associated withthe Ti/Al composition ratio. Motivated by this, we performed experiments to investigate the distribution of microstructures;the material’s binding energy, quantitative properties, transformation of crystal structure, and distribution of amorphous/crystalline were all recorded. In particular, the relationship between the physical and chemical properties during the coatingprocess is considered to be the dominant factor controlling the orientation and morphology of that zone (1, T, and 2). TheTiAlSiN coating layer was found to have hardness above 45 GPa and an adhesion above 100 N. In other words, understandingthe evolution and structure of TiAlSin helped us to produce a material with excellent properties that can be used as a hardcoating. Specifically, these properties were induced by a grain refinement of the nano-crystalline structure that correspondsto an increase in the silicon nitride contents.
쌍태아에서 제 1태아의 분만 후 제 2태아의 지연분만 : 중례보고
김주환,서민정,유희정,노권일,조대현,박정규,이정헌,조성남,손영수 朝鮮大學校 附設 醫學硏究所 2005 The Medical Journal of Chosun University Vol.30 No.3
With the widespread use of fertility medications and techniques of in vitro fertilization, multiple gestation has become epidemic in modern obstetric practice. Delivery of the initial fetus in a multiple gestation usually is followed by delivery of the subsequent fetus or fetuses shortly thereafter. However in rare circumstances, the delivery is delayed for days due to disappearance of uterine contraction after delivery of the first fetus. When uterine activity ceases after the delivery of the first neonate, a policy of nonintervention may be considered in case of an immature or very premature delivery, in order to achieve a gestational age for the remaining fetus(es) more compatible with neonatal survival. We report a case of twin gestation with prolongation of the delivery interval between the twins for 46 days.
간세포암의 고주파 열치료 후 천자침 경로를 통한 전이 1례
조영완,박석주,진한영,김준영,이재익,강명주,박정하,윤정희,박성재,지삼룡,이연재,이상혁,설상영 인제대학교 2006 仁濟醫學 Vol.27 No.-
Radiofrequency ablation(RFA), as a form of minimally invasive therapy for hepatocellular carcinoma, has become an important treatment modality. Because of limitation of surgery, RFA has become standard therapy for hepatocellular carcinoma in some situations. But there are some complications of RFA such as bleeding, infection, hematoma, adjacent organ thermal damage including intestinal perforation, needle track seeding, and so on. There are few reports in the literature that systematically evaluate the incidence of needle tract seeding and its associated risk factors. And only 2 cases of needle tract seeding of hepatocellular carcinoma after RFA were reported in Korea. We report a case of needle tract seeding of hepatocellular carcinoma after RFA.
체간안정화 훈련이 만성 뇌졸중 환자의 호흡기능에 미치는 효과
이경진(Kyeong-Jin Lee),정주현(Ju-Hyeoun Jeong),조명래(Myeong-Rae Jo),김세윤(Se-Yoon Kim),김난수(Nan-Soo Kim) 대한심장호흡물리치료학회 2019 대한심장호흡물리치료학회지 Vol.7 No.1
Purpose : The purpose of this study is to examine the effects of trunk stability training on improving trunk control, respiratory function, and respiratory muscle activation in stroke patients. Methods : The subjects were assigned to two groups: the intervention group (n=15) and the control group (n=15). Both groups participated in a conventional stroke rehabilitation program, but the intervention group also received trunk stability training for 30 minutes a day, 3 times a week, for 6 weeks. The main trunk stability exercise consisted of the dead bug exercise. Trunk control was assessed using a trunk impairment scale, and respiratory function (pulmonary function and respiratory muscle function) was assessed using spirometry. The data were analyzed using the Pearson correlation, independent t-test, and paired t-test. Results : Trunk control was significantly positively correlated with pulmonary function and respiratory muscle strength. Both groups showed a significant increase in trunk control and respiratory function. Conclusion : This study demonstrated that a conventional stroke rehabilitation program and trunk stability training have positive effects on respiratory function and respiratory muscle activation in stroke patients.
제어 시스템 설계를 위한 IEC 1131-3 기반의 제어 로직 생성기의 개발
정구,심주현,이제필,이철수 한국공작기계학회 2001 한국공작기계학회 춘계학술대회논문집 Vol.2001 No.-
This paper describes the methodology of an IEC 1131-3-based control logic generator for the control system design and converting algorithm between programmable languages. The proposed control logic generator is generated based on the software model and common element with data type, variables, POUs(program organization unit) and execution control unit commonly used within programmable languages of IEC 1131-3 Standard. The generation method of object file was proposed on five programmable language based on IEC1131-3. The generation method of object file is represented as following; 1) the generation method using conversion algorithm from LD to IL with FBD(function block diagram), 2) the generation method using C code generation algorithm from SFC using the SFC execution sequence with FBD and ST(structured text). The proposed control logic generator was implemented by Visual C++ and MFC on MS-windows NT 4.0