비혈연간 조혈모세포이식 후 재발한 만성골수성백혈병에서 Gleevec에 의한 완전관해 및 공여자 조혈 재건 1예

박사라,김우건,이제환,최성준,형철호,손희정,강혜진,지형석,이정신,이규형 대한조혈모세포이식학회 2002 대한조혈모세포이식학회지 Vol.7 No.2

저자들은 만성골수성백혈병으로 동종 골수이식 후 림프구성급성전환으로 재발한 환자에서, Gleevec 투약 후 DLI (donor lymphocyte infusion) 없이 공여자 조혈(donor hematopoiesis)의 재건이 이루어지고, 세포유전학적, 분자생물학적 기준에서 모두 완전관해에 이르고, 12개월째 관해를 유지하고 있는 환자를 경험하였기에 이를 보고하는 바이다. 본례의 환자에서 Gleevec은 동종 골수이식 후 급성전환기로 재발한 환자에서도 매우 효과적인 것으로 나타났다. Gleevec은 동종 골수이식 후 재발한 만성골수성백혈병에서 Interferon-α, DLI, 2차골수이식 등 기존의 치료의 문제점을 보완할 수 있는 유용한 치료방법으로 사용될 수 있을 것으로 생각되며, 이의 장기적 치료효과의 평가와 기존치료와의 병합요법의 유용성 등에 대한 향후 연구가 필요할 것으로 생각된다. We report a 32-year old woman with chronic myelongenous leukemia (CML) in lymphoid blast crisis, who underwent allogenic bone marrow transplantation (BMT) from HLA phenotype full mached unrelated donor. Her disease relapsed into full-blown blast crisis. Upon treatment with gleevec, she achieved immediate remission of leukemia as well as the donor type hematopoiesis without donor lymphocyte infusion (DLI). Our case suggests the high effectiveness of gleevec in CML relapsed after allogeneic BMT. Further studies are needed to define the role of gleevec (with or without DLI) in the management of CML relapsed after allogeneic BMT.

한국재벌의 비관련다각화 요인에 관한 자원적 접근

李光哲,金炯成 홍익대학교 경제연구소 1993 經濟硏究 Vol.9 No.-

Polymer Light Emitting Diode의 발광특성 연구 : A study on electoluminescence properties of PLED with poly [2-(2'-ethylhexyloxy)-5-methoxy-1,4-phenylenevinylene]

이상협;배형철;송석태;한찬수;채희백 순천향대학교 기초과학연구소 2010 순천향자연과학연구 논문집 Vol.16 No.2

In order to know how the [2-(2'-ethylhexyloxy)-5-methoxy-1,4-phenylenevinylene] (MEH-PPV) layer works in organic light emitting diode, two different types of devices were fabricated, which are MEH-PPV single layer devices and MEH-PPV/tris (8-hydroxy-quinoline)aluminium(Alq3) bilayer devices. On the indium-tin-oxide(ITO) glass anode MEH-PPV layer was first spin-coated, and the Alq3 layer and the aluminium(Al) anode were vapor-deposited sequentially. The devices shows a trend that has lower current, luminous efficiency in case the thickness of the device is larger. Some bilayer devices, however, show more improved performance than other devices of smaller total thickness. This results were discussed on the basis of improved exciton formation resulting from balanced carrier transport.

Al_2O_3를 첨가한 LaFeO_3 박막의 암모니아 가스감지 특성

이복상,조철형,최부천,박기철,마대영,김정규 경상대학교 생산기술연구소 2002 工學硏究院論文集 Vol.2 No.-

LaFeO_3 thin films with 2%, 5% and 10% A1_2O_3 additives were fabricated by r.f. magnetron sputtering method on Al_2O_3 substrates. Structural, electrical and ammonia gas sensing characteristics of the thin films with different heat treatments were examined. From the XRD results, the compound of LaFeO_3 and Al_2O_3 was not found. Thin film with 5% Al_2O_3 additives, heat-treated at 800℃, showed the sensitivities of about 85% for 100ppm ammonia gas at the working temperature of 300℃. The response time to the ammonia gas was several seconds and the thin film showed good selectivity to NH_3 gas.

Bacillus thuringiensis var. darmstadiensis 와 var. sotto의 내독소와 Bacillus thuringiensis var. kurstaki가 생산하는 아밀라제의 연구

이형환,김삼찬,황광현,임창로,조용칠,정인명 건국대학교 교육대학원 1991 敎育論叢 Vol.15 No.-

Endotoxin crystals produced by B.thuringiensis var. darmstadiensis cultured in modified GYS medium over 72 h were ovoidal in shape and separated using Renografin gradient centrifugation. The crystal protein bands were observed. When B.thuringiensis var sotto was grown in the modified GYS broth, it entered stationary phase at 8-9 h after inoculation. Proteinaceous crystals were banded at the position in 40% of Renografin gradient. The solubilized crystal proteins were formed by two bands, 130 Kd and 68 Kd in the SDS-PAGE. One plasmid was observed in B.thuringiensis var darmstadiensis and no plasmid in var. sotto in this study. Enzyme activity of amylase produced B.thuringiensis var kurstaki strain in the basal medium was 0.4 units per ml, and was enhanced to 0.6 units per ml in the basal medium contained soluble starch, Ca^++, Mg^++ and Mn^++ ions. Amylase production medium containing soluble starch was suitable for the amylase production and the highest activity appeared at 4-6 h after cultivation at 32℃. The amylase activity obtained by ethanol precipitation was 0.20 units per ml in 0.1 M phosphate buffer. The band of the molecular weight of 50 Kd was observed by SDS-PAGE analysis. Km value of the amylase for the soluble starch was 6.80 mg per ml.

콘크리트 내 철근 부식도의 비파괴 측정을 위한 수치 해석 모델링

이형우,임홍철 대한건축학회 2003 대한건축학회 학술발표대회 논문집 - 계획계/구조계 Vol.23 No.2(구조계)

The corrosion state of a reinforcing steel bar in concrete, characterized by the electrical impedance of the interface between the steel bar and the concrete, can be measured indirectly with an array of current and voltage electrodes on the concrete surface. The measured impedance, however, depends on the electrical resistivity of the concrete, the depth and diameter of the steel reinforcing bar as well as the interfacial properties. To relate the measured impedance directly to the interfacial properties, a closed form solution to the governing Poisson's equation for the potentials from arbitrary current sources in the vicinity of the reinforcing bar have been applied to an numerical analysis model. The solution uses an impedance boundary condition for the complex impedance at the steel-concrete interface. The response of an arbitrary corrosion state can be simulated in this model by embedding the appropriate complex, frequency-dependent impedance at the interface and computing the voltage/current response that would be measured for an arbitrary placement of electrodes on the concrete surface. This simulation confirms that important parameters of the interfacial impedance controlling corrosion kinetics such as polarization resistance and double layer capacitance are clearly observed in the measured surface data.

납착 방법이 치과용 금속의 성상에 미치는 영향에 관한 연구

김철형,송영균,이종혁 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1

연구 목적: 본 연구는 치과영역에서 많이 사용되는 비귀금속 합금인 니켈-크롬 합금을 산소-아세틸렌 불꽃 납착법과 적외선 용접법을 이용해 용접하고 용접부 및 그 주변을 광학 현미경과 EPMA (Electron Probe Micro Analyzer, 전자미세현미분석기)를 통해 관찰하여 용접방법이 금속의 성상(性狀)에 미치는 영향을 조사하였다. 연구 재료 및 방법:니켈-크롬 합금을 이용하여 3.0 mm 직경, 30 mm 길이의 시편을 제작하였다. 시편은 산소-아세틸렌 불꽃 납착법, 적외선 용접법의 두 개의 그룹으로 분류하였다(n = 4). 시편을 low-speed disc로 자른 후 각각을 산소-아세틸렌 토치와 적외선 용접기를 이용해 용접하였다. 용접과 마무리 후에 시편을 광학현미경으로 용접부, 5 mm 떨어진 지점, 10 mm 떨어진 지점의 3개 부위에서 관찰하고EPMA를 이용하여 분석하였다. 결과: 광학 현미경 관찰 결과 용접부에서는 두 방법 모두 다수의 파절선이 관찰되었고, 10.0 mm 떨어진 거리에서는 두 방법 모두 시편의 표면에서 파절선이 발견되지 않았으나 5.0 mm 떨어진 거리에서는 적외선 용접법에서는 시편의 표면이 다소 거칠기는 했으나 파절선은 발견되지 않았고 산소-아세틸렌 불꽃 납착 표면에서는 다수의 파절선이 관찰되었다. EPMA분석에서 적외선 용접법에 의한 방법에서는 용접부위, 5.0 mm 떨어진 부위, 10.0 mm 떨어진 부위 모두에서 시편 금속의 구성성분 비율이 제조사의 구성성분 비율과 10.0%이내의 오차를 나타내었고, 산소-아세틸렌 불꽃 납착법에서는 5.0, 10.0 mm에서는 시편금속의 구성성분이 10.0%이내의 오차를 나타내었으나, 납착 부위에서는 Ni만이 검출되어 적외선 용접법과는 차이를 나타내었다. 이와 같은 분석결과를 살펴 볼 때 적외선 용접을 시행한 시편의 구성 성분이 모금속의 성분과 유사한 것을 알 수 있었다. 결론: 이상의 결과로 산소-아세틸렌 불꽃 납착법보다 적외선 용접법을 이용할 때, 금속의 결함 및 성분의 변화가 적어서 좀 더 우수한 금속 보철물의 제작이 가능할 것으로 사료된다. PURPOSE. The purpose of this study was to compare Ni-Cr alloy property of gas-oxygen torch soldering and infrared welding using optical microscope and Electron Probe Micro Analyzer (EPMA). MATERIALS AND METHODS. Ni-Cr alloys were casted for specimens. Specimens had 3.0 mm diameter, 30.0 mm length and were divided into two groups. Each group had 4 specimens. One group was for gas-oxygen torch soldering and the other was infrared welding. Specimens were cut with low-speed disc and soldered each other with gas-oxygen torch and infrared machine. After soldering and polishing, specimens were observed at 3 points (soldering point, 5 mm distance point, 10 mm distance point) with optical microscope and analyzed 3 points (soldering point, 5 mm distance point, 10 mm distance point with EPMA. RESULTS. The results of this study were as follows: 1. The observation of gas-oxygen torch soldering at 10 mm distance point under the optical microscope was not founded any specific surface properties, but some crack lines were observed at 5 mm distance and soldering point. 2. There were no crack lines were founded at the observation of infrared welding at 10 mm distance and 5 mm distance points under the optical microscope. However, at the 5 mm distance, the surface was not smooth enough compared with at 10 mm distance point. Some crack lines were observed at the welding point as well. 3. In the EPMA analysis of the gas-oxygen torch soldering, the component of Ni was increased by 4.5%, Cr was increased by 7.5% than that of the Ni-Cr alloy at the 10.0 mm distance. At the 5 mm distance, the component of Ni was decreased by 6.1%, Mo was increased by 9.0% than that of the Ni-Cr alloy but Cr was equally shown at the 5.0 mm distance. Only Ni was shown at the soldering point. 4. In the EPMA analysis of the infrared welding, the component of Ni was increased by 9.1%, Cr was increased by 0.4% than that of the Ni-Cr alloy but Al was equal at the 10.0 mm distance. At the 5 mm distance, the component of Ni was increased by 4.7%, Cr was increased by 4.7% and Al was increased by 0.1% than that of the Ni-Cr alloy. At the welding point, the component of Ni was increased by 8.8%, Cr was increased by 8.2% than that of the Ni-Cr alloy. CONCLUSION.From these results, at the 5 mm distance from the soldering point, the surface of the infrared welding was more smoother than that of the gas-oxygen torch soldering. On the EPMA analysis, the component of the specimens with infrared welding was more similar than that of the gas-oxygen torch soldering compared with the component of the Ni-Cr alloy.

Two Stage 발효에 의한 고산도 식초 생산

이영철,이금용,김형찬,박기범,유익제,안평욱,최춘언,손세형 한국산업미생물학회 1992 한국미생물·생명공학회지 Vol.20 No.6

산업적으로 산도 17.0% 이상의 고산도 식초를 생산하기 위하여 반연속식인 1st stage와 유가식인 2nd stage로 구성된 two stage 초산 발효를 온도 30 ℃, 교반속도 600 rpm, 통기량 0.1 vvm에서 실시하였다. 1st stage에서 초기 에탄올 농도를 50.0 g/ℓ, 잔류 에탄올 농도를 5.0 g/ℓ로 정하여 반연속적으로 초산발효를 하고, 2nd stage 에서 발효시간의 경과에 따라 에탄올을 유가식으로 첨가하여 초산발효액내의 에탄올 농도를 5.0 g/ℓ에서 10.0 g/ℓ로 유지했을 때 산도가 17.6%인 고산도 식초를 생산할 수 있었으며, 또한 이 ??의 최대 초산 생산성은 3.3 g/ℓ·hr였다. The production of vinegar containing 16.0 ∼18.0% of acetic acid was examined in two stage fermentation consisting of semi-continuous and fed-batch type. The optimum conditions were obtained when the fermentation was carried out at agitation of 600 rpm, aeration of 0.1 vvm and temperature of 30℃. The initial and residual ethanol concentration in 1st stage were 50.0 g/ℓ and 5.0 g/ℓ, respectively, and the ethanol concentration in 2nd stage was maintained from 5.0 to 10.0 g/ℓ. The maximum productivity was 3.3 g/ℓ-hr and the acidity was 17.6% after the two days of acetic acid fermentation.

인체의 수동적 전기특성 계측법 개발

이현철,윤재현,박형준 원광대학교 공업기술개발연구소 2003 工業技術開發硏究誌 Vol.23 No.-

In this study, a system for the method measuring of passive electrical properties in the human body was developed. The system was composed of the stimulating part for input with voltage(about 2[㎷]) and of the measuring part for measurement of electrical properties in human body. As a result of this experiment, the frequency characteristic of each subject represent that the electrical properties goes up in spite of a constant stimulate-voltage according to frequency (l[㎐]-50[㎑]) increment. Namely, the amplitude of stimulate-signal was not reflected but frequency was reflected on the measured results. This result be estimated that the proposed system is able to measure the passive electrical properties of human body. Also, it would be estimated neural signal propagation directions by using the method developed in this study was measured passive electrical properties in each part of body.

敎科課程을 中心으로 한 韓日農學系(園藝·食品·獸醫)大學의 敎育現況 調査

李愚升,孫泰華,尹衡植,毛麒喆 경북대학교 1982 새마을 硏究論叢 Vol.2 No.-

The authors studied on the curicullum between Korea and Japan in the deaprtments of horiculture, food technology and veterinary. The results are as follows. 1. In the department of horticulture, professional education period was 3 years in Korea while 2 or 2.5 years in Japan. These results were compared among 3 colleges of Korea and Japan. Credits for graduation was 48-52% for propessional education with submajoring subjects and 45% when majoring subject in Korea, but 54-61% in Japan. Credits for required subjects were 17-29% among credits for graduation in Korea while 28-29% in Japan. 2. Cultural education period is almost 1 year in Korea, but different in Japan. Credits for graduation are as follows; Cultural education is 36-37%, majoring fields 15% and the others 12-13% in Korea while 43-46% for cultural education, 54-57% for majoring field in Japan. Differences were shown among 3 colleges dealt with the department of food technology by locational characteristics in Japan. 3. In the department of Veterinary, collage curicullums were not fixed for the students because of transitional period. Required subjects among 4 colleges were shown as the same tendency in Korea.