Rambus DRAM실장용 ${mu}!$BGA (Ball Grid Array) 및 ${mu}!$Spring 패키지와 전기적 특성

김진성,유영갑,Kim, Jin-Seong,Yu, Yeong-Gap 대한전자공학회 2001 電子工學會論文誌-SD (Semiconductor and devices) Vol.38 No.4

본 논문에서는 μspring 패키지의 구조와 제조공정을 소개하고, 전기적 특성을 μBGA와 비교 분석한 결과를 제시하였다. μBGA에서와 같이 μSpring 패키지의 연결선 인덕턴스 값은 기존의 TSOP 패키지의 반 이하로서 월등한 고속 신호 전달 특성을 제공하게 된다. 또한 μSpring CSP 패키지의 경우 가장 열악한 substrate trace를 가진 핀에서도 2.9nH로 평가되어, Rambus DRAM module의 인덕턴스 규격 상한 값 4nH에 비하여, 약 25% 정도의 margin을 제공한다. μSpring CSP패키지는 μBGA의 약 50%의 제조 비용으로서 μBGA가 만족시키지 못하는 JEDEC Level 1 규격을 충족시킬 뿐만 아니라, thermal cycle 1000회를 통과하는 높은 신뢰성을 제공하여 강력한 경쟁력을 가진다. This paper presents the structure of a $\mu$Spring package, its fabrication process and an analysis of its electrical characteristics compared to that of a $\mu$BGA. It was found that both $\mu$BGA and $\mu$Spring packages provide with outstanding high speed signal transmission characteristics due to their lower inductance of package interconnection lines, smaller than half of inductance of TSOP package lines. Even the worst case substrate trace of a Rambus DRAM $\mu$Spring package yields the line inductance of 2.9nH, which provides with 25% margin compared to the Rambus DRAM specification of 4nH. The fabrication cost of $\mu$Spring package is lower than that of $\mu$BGA by 50%, passes 1000 thermal cycles, meets JEDEC Level 1 specification whereas $\mu$BGA does not, and thereby yields high reliability and strong competing power.

특집 - 산란계 자조금사업 정착방안(농가) - 자조금은 우리의 살길이다 -

김진성,Kim, Jin-Seong 대한양계협회 2009 월간 양계 Vol.41 No.10

Development of Video Image-Guided Setup (VIGS) System for Tomotherapy: Preliminary Study

김진성,주상규,홍채선,정재원,손기홍,신정석,신은혁,안성환,한영이,최두호,Kim, Jin Sung,Ju, Sang Gyu,Hong, Chae Seon,Jeong, Jaewon,Son, Kihong,Shin, Jung Suk,Shin, Eunheak,Ahn, Sung Hwan,Han, Youngyih,Choi, Doo Ho Korean Society of Medical Physics 2013 의학물리 Vol.24 No.2

초고압 전산화단층촬영(megavoltage computed tomography, MVCT)이 단층치료(Tomotherapy) 환자의 치료 자세 교정 방법으로 사용되고 있다. MVCT는 부가적인 방사선 피폭뿐만 아니라 전체 치료 시간이 길어지는 단점을 가지고 있다. 이러한 문제점 해결을 위해 비디오 영상기반 환자 치료 자세 교정 시스템(video image-guided setup system, VIGS)을 개발했다. 단층치료 장치내 갠트리에 직각으로 2대의 비디오 카메라를 장착하고 이로부터 얻은 영상을 이용하여 환자의 자세 오차를 측정하는 프로그램을 자체 개발했다. 개발된 시스템은 사용자에 의해 정의된 관심 영역에서의 에지 검출(edge detection) 결과를 기반으로 자동 정합을 통해 자세 오차를 찾도록 고안되었다. 두경부 환자를 묘사하기 위해 휴먼 팬톰을 이용하여 컴퓨터 단층 치료계획 영상을 획득한 후 전산화 치료계획을 수행했다. 실제 치료 상태를 재현하기 위해 고정 용구를 이용하여 팬톰을 고정했으며 전산화치료계획 결과로 부터 팬톰 자세 검증을 위한 기준 MVCT 영상을 획득했다. 팬톰을 치료 위치에 위치시킨 후 MVCT 영상을 얻고 이를 기준 MVCT영상과 비교하여 치료계획시와 동일환 자세가 되도록 위치를 교정했다. 교정된 자세에서 VGIS를 이용하여 기준 비디오 영상을 획득했다. 10회 걸쳐 MVCT 영상을 이용한 자세 교정과 VIGS를 이용한 비디오 영상기반 자세 교정을 각각 수행하여 두 방법간의 교정 값 차이(상관 분석)와 분석 시간을 비교했다. 팬톰 위치 교정 시간은 VIGS 시스템($41.7{\pm}11.2$ seconds)이 MVCT 방법($420{\pm}6$ seconds)에 비해 현저히 적게 조사됐다(p<0.05). 하지만 두 방법간의 위치 오차 분석 결과 통계적으로 유의한 차이는 보이지 않았다(x=0.11 mm, y=0.27 mm, z=0.58 mm, p>0.05). VIGS시스템이 짧은 시간에 정확한 위치 오차 감지 능력을 보여 이의 개발이 단층치료의 절차를 효율적으로 개선하는데 효과적일 것으로 생각된다. At present, megavoltage computed tomography (MVCT) is the only method used to correct the position of tomotherapy patients. MVCT produces extra radiation, in addition to the radiation used for treatment, and repositioning also takes up much of the total treatment time. To address these issues, we suggest the use of a video image-guided setup (VIGS) system for correcting the position of tomotherapy patients. We developed an in-house program to correct the exact position of patients using two orthogonal images obtained from two video cameras installed at $90^{\circ}$ and fastened inside the tomotherapy gantry. The system is programmed to make automatic registration possible with the use of edge detection of the user-defined region of interest (ROI). A head-and-neck patient is then simulated using a humanoid phantom. After taking the computed tomography (CT) image, tomotherapy planning is performed. To mimic a clinical treatment course, we used an immobilization device to position the phantom on the tomotherapy couch and, using MVCT, corrected its position to match the one captured when the treatment was planned. Video images of the corrected position were used as reference images for the VIGS system. First, the position was repeatedly corrected 10 times using MVCT, and based on the saved reference video image, the patient position was then corrected 10 times using the VIGS method. Thereafter, the results of the two correction methods were compared. The results demonstrated that patient positioning using a video-imaging method ($41.7{\pm}11.2$ seconds) significantly reduces the overall time of the MVCT method ($420{\pm}6$ seconds) (p<0.05). However, there was no meaningful difference in accuracy between the two methods (x=0.11 mm, y=0.27 mm, z=0.58 mm, p>0.05). Because VIGS provides a more accurate result and reduces the required time, compared with the MVCT method, it is expected to manage the overall tomotherapy treatment process more efficiently.

Tm₂O₃ 첨가가 MLCC용 $BaTiO₃ 유전특성에 미치는 영향

김진성,이희수,강도원,김정욱,Kim, Jin-Seong,Lee, Hee-Soo,Kang, Do-Won,Kim, Jeong-Wook 한국결정성장학회 2010 한국결정성장학회지 Vol.20 No.1

페로브스카이트 구조를 갖고 $Tm_2O_3$가 첨가된 MLCC용 $BaTiO_3$ 유전체를 제조하기 위하여 환원분위기, $1320^{\circ}C$의 온도조건에서 2시간 동안 소결하였다. 유전특성 측정과 미세구조 관찰을 통하여, $Tm_2O_3$ 첨가에 따라 $BaTiO_3$ 세라믹의 유전특성에 미치는 영향에 대해 연구하였으며 각 유전체의 상분석을 통하여 이차상 유무를 확인하였다. 1 mol%의 $Tm_2O_3$를 첨가한 유전체 시편이 유전특성이 가장 우수한 반면에 2 mol% 이상의 $Tm_2O_3$를 첨가한 시편의 유전상수는 1 mol%를 첨가한 시편에 비해 낮은 값을 보였다. 유전특성에 영향을 미치는 grain 크기 및 pyrochlore 이차상 형성은 미세구조분석과 결정구조분석에 의해 조사되었다. 또한, 이들 데이터를 대표적 희토류인 $Er_2O_3$를 첨가한 유전체 시편과 비교하였고 유전특성과 관련이 있는 pyrochlore상의 형성을 상분석으로써 확인하였으며 이 결과는 세라믹 커패시터의 유전특성이 도핑에 따른 이차상과 $BaTiO_3$ tetragonality의 변화와 관련되어있다고 판단된다. Thulium oxide-doped barium titanate ceramics for MLCCs with perovskite structure were prepared by a sintering process at $1320^{\circ}C$ for 2 h in a reduced atmosphere. The effect of $Tm_2O_3$ addition on dielectric property of barium titanate ceramics has been studied in terms of their microstructures. Moreover, the phase identification of the dielectric specimens was conducted to define the secondary phase (pyrochlore). The specimen doped with 1 mol% $Tm_2O_3$ exhibited the highest dielectric constant. However, the dielectric constants of specimens with more than 2 mol% $Tm_2O_3$ to $BaTiO_3$ were the lower values than that of 1 mol% doped one. The grain size and the formation of pyrochlore phase associated with the dielectric properties were examined through morphology development and the structural analysis. Furthermore, these data were compared with the property of the dielectric material doped with $Er_2O_3$. It could be concluded that the dielectric property of ceramic capacitors were attributed to the change of pyrochlore phase and the tetragonality of $BaTiO_3$ with doping.

비회귀성 후두 신경; 수술 전 경부 CT를 통한 신경 손상의 예방

김진성,소상수,최동일,양윤수,홍기환,Kim, Jin-Sung,So, Sang-Soo,Choi, Dong-Il,Yang, Yun-Su,Hong, Ki-Hwan 대한후두음성언어의학회 2007 대한후두음성언어의학회지 Vol.18 No.1

Background and Objectives: The nonrecurrent laryngeal nerve(NRLN) is exceedingly rare nerve anomaly that is associated with developmentally aberrant subclavian artery. The presence of NRLN is associated with an increased risk of vocal cord palsy in thyroid surgery. The purpose of this study is to investigate its prevalence, associated vascular anomaly and necessity of recognizing its possibility for prevention of intraoperative nerve damage. Materials and Methods: Between January 2004 and December 2006, 583 thyroidectomy were performed at our hospital. Of these cases, 529 cases(90.7%) were checked preoperative neck CT. Results: Patients with preopreative neck CT, 6 cases show the retroesophageal abberant right subclavian artery that arising directly form the aortic arch. 5 cases of these 6 cases(5/6, 83.3%) and of 583 patients(5/583, 0.8%) performed thyroid surgery were identified NRLN per-operatively. All of them are identified on the right side. There were 4 women and 1 man. In all cases, there were no clinical symptoms. I case was performed only left hemithyroidectomy, so we cannot identified NRLN. No vocal cord palsy was observed. Conclusion: It is possible to predict NRLN from preoperative neck CT. When NRLN is suspected, careful, complete dissection of the nerve is always advocated. These process can reduce the operative morbidity.

자전연소합성법에 의한 ZrB₂ 세라믹분말합성 및 NaCl의 영향

김진성,원창환,Kim, Jinsung,Nersisyan, Hayk,Won, Changwhan 한국재료학회 2014 한국재료학회지 Vol.24 No.5

Zirconium boride is an artificial or which is rarely found in the nature. $ZrB_2$ is popular in the hard material industry because it has a high melting point, excellent mechanical properties and chemical stability. There are two known methods to synthesize $ZrB_2$. The first involves direct reaction between Zr and B, and the second is by reduction of the metal halogen. However, these two methods are known to be unsuitable for mass production. SHS(Self-propagating High-temperature Synthesis) is an efficient and economic method for synthesizing hard materials because it uses exothermic reactions. In this study, $ZrB_2$ was successfully synthesized by subjecting $ZrO_2$, Mg and $B_2O_3$ to SHS. Because of the high combustion temperature and rapid combustion, in conjunction with the stoichiometric ratio of $ZrO_2$, Mg and $B_2O_3$; single phase $ZrB_2$ was not synthesized. In order to solve the temperature problem, Mg and NaCl additives were investigated as diluents. From the experiments it was found that both diluents effectively stabilized the reaction and combustion regime. The final product, made under optimum conditions, was single-phase $ZrB_2$ of $0.1-0.9{\mu}m$ particle size.

영상유도 양성자치료를 위한 콘빔 CT 재구성 알고리즘: 기하학적 보정방법에 관한 연구

김진성,조민국,조영빈,윤한빈,김호경,윤명근,신동호,이세병,이레나,박성용,조관호,Kim, Jin-Sung,Cho, Min-Kook,Cho, Young-Bin,Youn, Han-Bean,Kim, Ho-Kyung,Yoon, Myoung-Geun,Shin, Dong-Ho,Lee, Se-Byeung,Lee, Re-Na,Park, Sung-Yong,Cho, Kwan- 한국의학물리학회 2008 의학물리 Vol.19 No.4

IMRT, 양성자 치료와 같이 방사선 치료 기술이 발전할수록 치료 시 환자의 위치를 확인하고 그 정확성을 평가하는 기술의 중요성이 강조되고 있다. 현재 국립암센터 양성자치료센터에 설치되어 있는 양성자 치료기의 단순 X-선 영상시스템을 이용하여 콘빔 CT (cone-beam CT) 3차원 영상을 획득, 영상유도 방사선 치료의 가능성을 확인하고자 하였다. 양성자 치료기에 설치되어있는 X-선 영상시스템(SDD: 2,108 mm, SOD: 1,511 mm, Varian a277 x-ray tube & Varian Paxscan 4030: a-Si+DRZ screen)을 이용하여 양성자 갠트리를 $2^{\circ}$씩 회전시켜가면서 기하학적인 오차 측정을 위한 팬톰과 인체 팬톰 (Humanoid phantom, Rando, CA, USA)의 투사영상을 획득하였다. 현재 시스템적으로 연속적인 회전과 영상획득이 지원되지 않아서 영상획득 후 갠트리를 회전하는 방법으로 투사영상을 획득하였다. 기하학적 오차측정을 위한 팬텀과 두경부 팬텀에 대해서 $360^{\circ}$를 회전하며 180장의 투사영상($2,304{\times}3,200$, 14 bit with 127${\mu}m$ pixel pitch)을 관전압 85 kVp, 관전류 80 mA, 조사시간 0.5 s의 조건으로 촬영하였다. 콘빔 CT 영상재구성을 위해 Ram-Lak filter를 적용한 Feldkamp cone-beam 알고리즘을 사용하였으며, 획득한 180장의 투사영상을 사용하여 $0.4{\times}0.4{\times}0.4mm^3$의 voxel size를 가진 $512{\times}512{\times}512$ CT영상을 재구성하였다. 기하학적인 오차 측정방법을 통해 X-선 선원, 검출기와 갠트리의 기하학적 정보를 측정하였다. 측정된 결과에 의하면 검출기가 $0.25^{\circ}$ 회전된 오차를 보이는 것을 발견하였다. 기하학적 교정으로 재구성된 콘빔 CT 영상을 multi-planar view (axial, sagittal and coronal view) 및 3차원 영상으로 재구성하여 비교 평가 하였다. 현재 양성자치료기에 설치되어있는 단순 X-선 영상 시스템에서 기하학적 오차 측정을 위한 볼 팬텀을 이용하여 시스템의 오차를 측정하였다. 측정한 오차를 바탕으로 기하학적 교정을 통해서 두경부 및 복부 팬텀에 대한 3차원 영상인 콘빔 CT 영상들을 재구성하였다. 추후 연속적인 회전을 통한 영상획득이 가능하게 된다면, 보다 정확하고 신속한 영상재구성이 가능 하며 콘빔 CT가 영상유도 양성자 치료에 매우 유용할 것으로 사려된다. According to improved radiation therapy technology such as IMRT and proton therapy, the accuracy of patient alignment system is more emphasized and IGRT is dominated research field in radiation oncology. We proposed to study the feasibility of cone-beam CT system using simple x-ray imaging systems for image guided proton therapy at National Cancer Center. 180 projection views ($2,304{\times}3,200$, 14 bit with 127 ${\mu}m$ pixel pitch) for the geometrical calibration phantom and humanoid phantoms (skull, abdomen) were acquired with $2^{\circ}$ step angle using x-ray imaging system of proton therapy gantry room ($360^{\circ}$ for 1 rotation). The geometrical calibration was performed for misalignments between the x-ray source and the flat-panel detector, such as distances and slanted angle using available algorithm. With the geometrically calibrated projection view, Feldkamp cone-beam algorithm using Ram-Lak filter was implemented for CBCT reconstruction images for skull and abdomen phantom. The distance from x-ray source to the gantry isocenter, the distance from the flat panel to the isocenter were calculated as 1,517.5 mm, 591.12 mm and the rotated angle of flat panel detector around x-ray beam axis was considered as $0.25^{\circ}$. It was observed that the blurring artifacts, originated from the rotation of the detector, in the reconstructed toomographs were significantly reduced after the geometrical calibration. The demonstrated CBCT images for the skull and abdomen phantoms are very promising. We performed the geometrical calibration of the large gantry rotation system with simple x-ray imaging devices for CBCT reconstruction. The CBCT system for proton therapy will be used as a main patient alignment system for image guided proton therapy.

경영정보 - 그리스 비극에서 배우는 경영의 지혜

김진성,Kim, Jin-Seong 한국시멘트협회 2011 시멘트 Vol.189 No.-

익기양음해독탕의 항암 및 항전이효과에 관한 연구

김진성,윤상협,류봉하,류기원,윤성우,Kim, Jin-Sung,Yoon, Sang-Hyub,Ryu, Bong-Ha,Ryu, Ki-Won,Yoon, Seoung-Woo 대한암한의학회 2003 大韓癌韓醫學會誌 Vol.9 No.1

Objective : Ikiyangeumhaedoc-tang(IYHT) has an effect of nourishing Yin(陰) and Jin(津), and has been used to cancer patient effectively. In order to prove the anticancer's and antimetastic effect of IYHT experimentally, studies were done. Methods : We evaluated the cytotoxic activity on HT-1080 cells as well as inhibitory effect on activity of DNA topoisomerase Ⅰ, cell adhesion, cell invasion and proliferation of HUVEC cells induced by bFGF and measured the expression of mRNA(uPA, MMP2, TIMP2), p-ERK protein, recovery effect of gap junctional intercellular communication by $H_{2}O_2$ and survival time of ICR mice bearing sacoma-180. Results : IYHT showed the inhibitory effect on DNA topoisomerase Ⅰ in the concentration of $100{\mu}g/ml,\;500{\mu}g/ml$ and the dosage-dependent inhibitory effect on the adhesion of HT-1080. The concentration of 1mg/ml of IYHT inhibited 15% of adhesion compared with control. IYHT decreased the expression of uPA, but not in MMP2, TIMP2 by RT-PCR and inhibited the expression of p-ERK effectively in the concentration of more than $500{\mu}g/ml.$ IYHT recovered the inhibited gap junctional intercellular communication by $H_{2}O_2$ to the level of 60% of normal control in the concentration of $400{\mu}g/ml$ but, did not extended the mean survival time of sarcoma 180-bearing mouse. Conclusions : It was concluded that IYHT could be applied usefully for prevention and treatment of human cancer, And also experimental study for the evaluation of molecular biological study and antimetastatic research would be recommended in the near future.

실험계획법을 이용한 나노 결정 소석회 합성

김진성,김정우,이희수,김용남,신현규,김환,Kim, Jin-Seong,Kim, Jung-Woo,Lee, Hee-Soo,Kim, Yong-Nam,Shin, Hyun-Gyoo,Kim, Hwan 한국결정성장학회 2008 한국결정성장학회지 Vol.18 No.4

본 연구에서는 균일침전법으로 합성된 $CaCO_3$를 하소한 후 수화시키는 방법을 이용하여 소석회를 제조하였다. 소석회를 제조하기 위하여, 염화칼슘$(CaCl_2)$과 우레아(Urea)가 출발 물질로 사용되었으며 염화칼슘 수용액과 우레아 수용액을 혼합하여 가열하는 동안 반응용기 내에서 탄산칼슘이 합성되었다. 침전물들을 여과하고 증류수와 에탄올로 수 차례 세척하였으며 건조시켰다. 소석회는 하소된 탄산칼슘의 수화과정을 통하여 합성되었다. 최적의 합성조건을 선정하는데 있어 실험의 잡음인자를 최소화하고 결과를 통계적으로 추론할 수 있는 실험계획법(다구치 실험계획법)을 이용하였다. 제조된 탄산칼슘을 $1000^{\circ}C$에서 30분 동안 하소시킨 후 에탄올 및 옥살산이 첨가된 증류수로 수화시킴으로써 결정입자 크기가 약 50 nm인 소석회를 제조할 수 있었다. Nano-crystalline slaked lime was synthesized using design of experiment. In order to synthesize slaked lime, calcium chloride $(CaCl_2)$ and urea were used as starting materials. Calcium chloride solution and urea solution were mixed and heated in vessel that calcium carbonate was precipitated during heating. Precipitates were filtered, washed several times using D.I.water and ethanol and finally dried in oven. Slaked lime $(Ca(OH)_2)$ has been fabricated by the hydration of calcined $CaCO_3$. Design of experiment (Taguchi method) was used to optimize parameter, to minimize noise factors of experiment and to statistically analyze the results. Slaked lime having about 50 nm in optimized crystallite size could be obtained by calcination of $CaCO_3$ at $1000^{\circ}C$ for 0.5 h and hydration with D.I water containing ethanol and oxalic acid.